RENOVATION OF EXISTING PRE FABRICATED BARRACK FOR CENTRAL POLICE CANTEEN IN 16 TH BTN AT BAKKANNAPALEM OF VISAKHAPATNAM

Removal of dilapidated cement mortar flooring and concrete and dispoaing the same to safe place including cost and conveyance of all materials and labour charges etc., complete.

CEMENT CONCRETE (1:5:10) PROP. USING 40MM GRANITE METAL WITH CONCRETE MIXER up to Plinth level INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LAYING, CURING, FINISHING, INCLUDING seigniorage ALL OTHER INCIDENTAL, OPERATIONAL, LABOUR ETC., COMPLETE FOR FOUNDATION BED AND UNDER STONE SLAB FLOORING FOR FINISHED ITEM OF WORK. (APSS NO: 402).

FLOORING WITH DOUBLE CHARGED/MULTI CHARGED STAIN FREE FULL BODY PORCELAIN VITRIFIED TILES WITH DOUBLE LAYER PIGMENT OF SIZE 600 X 600 MM AND THICKNESS BETWEEN 8-10 MM 1ST QUALITY CONFORMING TO IS:13711, 15:13712, 15:13630 (PARTS 1 TO 15) OF ANY COLOUR AND FINISH IN ALL SHADES AND DESIGNS, SET OVER BASE COAT OF CEMENT MORTAR (1:8), 12 MM THICK OVER CC BED ALREADY LAID OR RCC ROOF SLAB. INCLUDING NEAT CEMENT SLURRY OF HONEY LIKE CONSISTENCY SPREAD @ 3.3.KGS PER SQM & JOINTED NEATLY WITH WHITE CEMENT PASTE TO FULL DEPTH MIXED WITH PIGMENT OF MATCHING SHADE, INCLUDING COST OF ALL MATERIALS LIKE CEMENT, SAND WATER AND TILES ETC., COMPLETE, INCLUDING SEIGNIORAGE CHARGES, ETC., COMPLETE FOR FINISHED ITEM OF WORK-GROUND FLOOR

PLASTERING TO SUPERSTRUCTURE 12MM THICK WITH A BASE COAT OF 8 MM THICK IN CM (1:6) PROP. AND TOP COAT OF 4 MM THICK IN CM (1:4) PROP. WITH DUBARA SPONGE FINISHING COMPLETE INCLUDING MAKING GROOVES, COST AND CONVEYANCE OF ALL MATERIALS TO SITE, LABOUR CHARGES, SCAFFOLDING, Lifting (Mannual), CURING CHARGES, ALL OTHER INCIDENTAL AND OPERATIONAL CHARGES ETC., COMPLETE.FOR FINISHED ITEM OF WORK GROUND FLOOR (APSS NO: 9016904)

PAINTING TO EXTERIOR FACES OF WALLS WITH EMULSION PAINT OF APPROVED MAKE (ACE FROM ASIAN PAINT) AND COLOUR 2 COATS BY DILUTING 1LIT OF EMULSION PAINT WITH A MAXIMUM 750 ML OF WATER WITHIN AN INTERVAL OF NOT LESS THAN 6 HOURS BETWEEN TWO COATS OVER 1 COAT OF ASIAN EXTERIOR WALL PRIMER BY DILUTING 1LIT. OF PRIMER WITH 1LIT. OF WATER (TOTAL 3 COATS) WITH SURFACE PREPARATION ETC., AS PER STANDARD SPECIFICATION INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, BRUSHES, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES, CURING, SCAFFOLDING ETC., COMPLETE FOR FINISHED ITEM OF WORK, ALL FLOORS (APSS NO:908)

DESIGN, FABRICATION & SUPPLY OF LIGHT WEIGHT PRE ENGINEERED BUILDINGS FOR A MAXIMUM SPAN OF 9 METRES WITH 50 x 50 x 2.8 MM M.5 HOLLOW SQUARE TUBES FOR COLUMNS, TRUSSES & PURLINS WALLS WITH SANDWICH PANELS MADE UP OF 2 NOS 10MM THICK CEMENT BONDED PARTICLE/ FIBRE BOARD'S WITH 25MM THICK 12 KG/CUM DENSITY EXPANDED POLYSTYRENE IN BETWEEN ENCASED IN 1.25 MM THICK 24X7X26 MM 'W' TRACKS IN BOTTOM & TOP AND 'H' SECTION FOR SIDES WITH DOORS, WINDOWS & VENTILATORS, ROOFING WITH 26 GAUGE PRE PAINTED PROFILED SHEETS FIXED WITH SELF TAPPING/ DRILLING SCREWS, PAINTING WITH ENAMEL PAINT FOR STEEL ITEMS, OBD FOR INTERIORS AND ACE FOR EXTERIORS & PROVIDING BASE PLATES, TEMPLATES & ANCHOR BOLTS ALONG WITH CIVIL FOUNDATION DESIGNS & DRAWINGS FOR THE FINISHED ITEM OF WORK A) STEEL STRUCTURE: STRUCTURE IS MADE UP OF 50X50X 2.8 MM/33X66X2.8MM THICK HOLLOW M.S. SECTIONS FOR TRUSSES, COLUMNS, AND PURLINS…... COLUMNS

B) 10 MM THICK 200X200 MM M.S. PLATES FOR BASE PLATES, 250 MM LONG 12MM ANCHOR BOLTS WITH PLATE WASHER AND NUTS COMPLETE WITH ONE COAT OF ASIAN OR EQUIVALENT RED OXIDE PAINT.

C) SANDWICH PANELS: SANDWICH PANELS OF 50 MM THICK WITH 25 MM THERMOCOLE OF 12 KG/CUM, FIXED IN BETWEEN 2 NOS 10 MM CEMENT BONDED WOOD PARTICLE/ FIBRE BOARDS PROPERLY FIXED TOGETHER WITH 30 MMX30MMX30MM WOOD PIECES ALONG WIDTH & LENGTH WHEREVER NECESSARY

D) U TRACKS & SECTION: BOTTOM & TOP U TRACKS ARE 1RM. MADE OF 1.25 MM THICK 120 GSM G.I. SHEET OF SIZE 24X51X26 MM SIZE.

E)FABRICATED 'H' SECTIONS ARE MADE UP OF 2 NOS 1.25 MM 1RM. THICK C.R. OF 40 MM WIDTH FOR FLANGES AND 1 NOS OF 2 MM THICK C.R. OF 50 MM WIDTH PLATE FOR WEB. WILL BE USED

F) SANDWICH PANEL JOINERY IS MADE UP OF COUPLERS OR 1RM EQUIVALENT MADE FROM 0.6 MM G.I. ROLL FORMED SECTION TO HOLD 2 NOS OF 10 MM BOARD ON BOTH SIDES WITH 25 мм THERMOCOLE IN BETWEEN.

G) DOOR FRAMES :-51 X 51 STEPPED U SECTION MADE FROM 1.25 MM THICK C.R. SECTION WITH A 32 MM REBATE FOR 30 MM FLUSH DOOR AND DOOR SHUTTERS WITH 30 MM THICK BLOCK BOARD/FLUSH DOORS WITH BOILING WATER PROOF PLYWOOD COMPLETE WITH NECESSARY HARD WARE.

H)PAINTING:-1) STEEL STRUCTURE IS TO BE PAINTED WITH 2.150M COATS OF GRADE I ENAMEL PAINT.

I)PAINTING:-2) EXTERIOR WALLS ARE PAINTED WITH ONE COAST 1SQM OF PRIMER AND 2 COATS OF EXTERIOR EMULSION PAINT.

J)PAINTING:-3) INTERIORS ARE PAINTED WITH 1-2 COAT OF 1 SQM INTERIOR EMULSION PAINT.