Construction of Multipurpose Building At Sree Aarasuri Ambajimata Devashthan Trust Ambaji. Tal. Danta, Dist.-Banaskantha

NAME OF WORK :-

Construction of Multipurpose Building At Sree Aarasuri Ambajimata Devashthan Trust

Ambaji. Tal. Danta, Dist.-Banaskantha

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

1 Excavation for foundation upto 1.5 m depth including 754.71 Cmt. 157.16

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(B) Dense or Hard soil.

2 Excavation for foundation upto 1.5 m depth including 1279.19 Cmt. 276.24

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(D) Soft rock not requiring Blasting.

3 Excavation for foundation for depth from 1.5 m to 3.0 2389.39 Cmt. 651.26

m including sorting out and stacking of useful

materials and disposing off the excavated stuff upto

50 Meter lead.(E) Hard Rock.

4 Providing and laying cement concrete 1:3:6 (1- 293.90 Cmt. 3248.16

Cement : 3- coarse sand : 6- stone aggregates

mmnominal size) and curing complete including cost

of formwork in (A) Foundation and Plinth.

5 Providing and laying controlled cement concrete 412.75 Cmt. 4500.56

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (A) Foundations, footings, Base of

columns and Mass concrete.

6 Providing and laying controlled cement concrete 173.16 Cmt. 6887.19

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (D) Columns, Pillars posts and

struts, upto floor two level.

7 Providing and laying controlled cement concrete 186.71 Cmt. 6721.55

M.250 and curing complete excluding the cost of

formwork and reinforcement for reinforced concrete

work in (B) Walls, from top of foundation level upto

floor two level.

8 Providing and laying controlled cement concrete 14.41 Cmt. 5898.40

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Beams, Girders and Cantilever

upto floor two level. Ground Beam.

Schedule - B 1 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

9 Providing and laying controlled cement concrete 149.99 Cmt. 6482.18

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Beams, Girders and Cantilever

upto floor two level. PF Beam.

10 Providing and laying controlled cement concrete 143.66 Cmt. 6522.58

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Beams, Girders and Cantilever

upto floor two level. GF Beam.

11 Providing and laying controlled cement concrete 142.69 Cmt. 6561.97

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Beams, Girders and Cantilever

upto floor two level. FF Beam.

12 Providing and laying controlled cement concrete 129.97 Cmt. 6602.37

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Beams, Girders and Cantilever

upto floor two level. SF Beam.

13 Providing and laying controlled cement concrete 8.57 Cmt. 6641.76

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Beams, Girders and Cantilever

upto floor two level. Stair Cabin Beam.

14 Providing and laying controlled cement concrete 131.56 Cmt. 6654.89

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. PF Slab.

15 Providing and laying controlled cement concrete 110.08 Cmt. 6695.29

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. GF Slab.

16 Providing and laying controlled cement concrete 110.08 Cmt. 6734.68

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. FF Slab.

Schedule - B 2 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

17 Providing and laying controlled cement concrete 110.08 Cmt. 6775.08

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. SF Slab.

18 Providing and laying controlled cement concrete 26.32 Cmt. 7749.73

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. TF Slab (DOUBLE HEIGHT).

19 Providing and laying controlled cement concrete 171.09 Cmt. 4588.43

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever

upto floor two level. UG FLOOR Slab.

20 Providing and laying controlled cement concrete 174.38 Cmt. 6398.35

M.250 and curing complete including the cost of

formwork and excluding reinforcement for reinforced

concrete work in (C) Sill and Lintels & Chhaja upto

floor two level.

21 Providing and laying controlled cement concrete 33.14 Cmt. 6898.30

M.250 and curing complete including the cost of

formwork and reinforcement for reinforced concrete

work in [E] Staircases including landing upto floor

22 Providing TMT Bar FE 500D reinforcement for 316428.00 KG 77.29

R.C.C. work including bending, binding and placing

in position complete upto floor two level.

23 Providing and laying cement concrete flooring 1:2:4 881.30 Smt. 349.10

(1- cement : 2-coarse sand : 4-graded stone aggregate

20mm nominal size) laid in one layer and finished

with a floating coat of neat cement. (B) 50mm thick.

24 Applying general insecticide pest control treatment to 1215.50 Smt. 80.84

floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS

part -II( (0.075% concentration by mass) is

recommended 10.5ml chemical diluted with 5 liters of

water application 0.5 litre chemical /Sqm of surface is

recommended as per I.S.

Schedule - B 3 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

25 Precast concrete block masonry (including quoin 53.55 Cmt. 3771.97

blocks jamb blocks closer etc.) with solid concrete

blocks of approved size made of cement concrete

1:3:6 mix (1- Cement : 3 coarse sand: 6- graded stone

aggregates of 20 mm and down grade) in foundation

and plinth cement morter 1:6.

26 Precast concrete block masonry (including quoin 207.74 Cmt. 4053.69

blocks jamb blocks closer etc.) with solid concrete

blocks of approved size made of cement concrete

1:3:6 mix (1- Cement : 3 coarse sand: 6- graded stone

aggregates of 20 mm and down grade) in foundation

and plinth cement morter 1:6 in superstructue above

plinth upto floor two level.

27 Precast concrete block masonry (including quoin 147.25 Cmt. 4335.40

blocks jamb blocks closer etc.) with solid concrete

blocks of approved size made of cement concrete

1:3:6 mix (1- Cement : 3 coarse sand: 6- graded stone

aggregates of 20 mm and down grade) in foundation

and plinth cement morter 1:6 in superstructue above

plinth upto floor Four level.

28 Precast concrete block masonry in partition walls 10 20.60 Cmt. 676.85

cm. thick with solid block of approved size (including

quion blocks Jamb blocks closer etc.) made of

C.C.1:3:6 (1- Cement : 3- coarse sand : 6 graded stone

aggregates 20 mm and down grade) (A) in C.M. 1:4.

29 Masonary work using Aerated light weight concrete 240.23 Cmt. 4593.56

block having crushing strength not less than

kg/sqcm for super structure above plinth level upto

floor two level in cement mortar 1:5 ( 1 cement :

fine sand ) complete as per Technical Specification.

30 Masonary work using Aerated light weight concrete 120.47 Cmt. 5178.28

block having crushing strength not less than

kg/sqcm for super structure above plinth level upto

floor four level in cement mortar 1:5 ( 1 cement :

fine sand ) complete as per Technical Specification.

31 Providing 10mm thick cement plaster in single coat on 3091.90 Smt. 125.12

brick/concrete walls for interior plastering upto floor

two level and finished even and smooth in (ii) Cement

mortar 1:4 (1-cement :4-sand).

Schedule - B 4 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

32 Providing 15mm thick cement plaster in single coat on 8490.57 Smt. 165.02

Rough (Similar)side of single or half brick walls for

interior plastering upto floor two level and finished

even and smooth in (ii) Cement mortar 1:4 (1-cement

33 Providing 20 mm thick double coat mala cement 2874.84 Smt. 283.95

plaster on interior brick / concrete work for plastering

comprising of base coat of 12 mm thick cement plaster

in cement mortar (1 Cement : 4 coarse sand) in rough

finishing and 8 mm thick top coat of cement mortar

1:2 (1 Cement : 2 Coarse sand) finished with trovel

including scaffolding curing etc. complete.

34 Applying two coats of putty & two coats of primer of 11521.37 Smt. 40.59

approved brand and manufacture on new wall surface

to give an even shade including thoroughly brushing

the surface free from mortar dropping and other

foreign matter and sand papered smooth.

35 Wall painting (two coats) with plastic emulsion paint 11521.37 Smt. 83.18

of approved brand and manufacture on undecorated

wall surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

36 Finishing wall with weather proof exterior emulsion 2874.84 Smt. 110.75

paint on wall surface (three coats) to give an required

shape even shade after thoroughly brushing the

surface to remove all dirt, and remains of loose

powdered materials.etc complete.

37 P & L 24" x 24" / 48" x 48" or as size Selected by 1799.43 Smt. 1434.79

Engineer in Charge vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

38 P & L 24" x 24" / 48" x 48" or as size Selected by 514.98 Smt. 1467.72

Engineer in Charge vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar 1:6 (

cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with

color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for

Schedule - B 5 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

39 Providing and laying Vitrified tiles 8 to 10 mm thick , 1567.19 Smt. 1195.02

24'' x 24'' / 12" x 18" or as size Selected by Engineer

in Charge in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse sand)

and jointed with white cement slurry.

40 Providing and fixing tiles roofing with manglore tiles 432.51 Rmt. 273.93

including teak reepers of sizes 50mm x 25mm.

41 Providing and applying BRICK BAT BASE chemical 947.78 Smt. 1454.40

water proofing treatment to the terrace, sunk slab

including roughing cleaning the surface opening the

crackers in "V" grooves pattern and filing the same

with water proofing mortar 1:1 (1 C :1 S) including

brick bats bedding as directed to have proper slope

over a layer of C.M.1:6 (1 C : 6 S ) and filling the

joints with C.M. 1:1 (1 C : 1 S) including finishing the

top surface with 40 mm thick water proof cement

concrete 1:2:4 with using 6 mm grit in C.M. 1:3 (1 C :

3 S) and finished with a floating coat of neat cement

slurry using chemical water proofing compound as per

manufactures specifications (as per indian water

proofing co.surat or equivalent) including curing at

specified period as directed and imprinting fals square

of 0.30 x 0.30 mt gradient including making vata of

cmx10 cm (quater round) on inside periphery of the

parapet in C.M. 1:1 ( 1 C : 1 S ) With chine mosaic

flooring for terrace using 12 mm to 20 mm broken

pieces of glazed tiles to be laid over cement mortar 1:3

to plain or slope and to be tempered to bring mortar

creme out upto surface using white cement including

rounding off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid etc.

as directed.etc. Complete as directed by Engineer in

42 Providing and laying KITCHEN PLAT FORM 9.46 Smt. 3614.79

CONSIDERING HEIGHT 0.75MT (sandwich type)

with machine cut single side polished 30mm thick

KOTAH STONE including Fixing resting on

B.B.Masonry walls 23 cm.thick.in C.M.(1:6) with (i)

Fixing or precast R.C.C.1:2:4) 8 cm. thick slab

Making hole for gas piping ,and at top sandwich type

including including rubbing and polishing, half round

moulding filling gap with cement putty and cement

mortar etc,complete in true line and level as per detail

drawing and directed by E.I.C.

Schedule - B 6 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

43 Providing and laying machine polished Granite Salb 755.83 Smt. 3392.59

with machine cut free edges in Door Window

Sill/Jambs/ Sofit on 12mm thick cement plaster 1:3 (1

cement : 3 coarse sand) or 20mm (average) thick base

of cement mortar 1:6 (1 cement : 6 course sand) laid

over and jointed with coloured cement slurry

including rubbing and polishing and including making

half round moulding to toe of treads etc.. complete as

directed by E.I.C.

44 Providing and fixing standared extruded of 25.83 Smt. 1175.56

alluminium section of size 63mm x 38.10mm x 1.2mm

, @ Wt. 0.643 Kg/mt with colour Powder Coated

alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation.

45 Providing and Fixing Anodized Aluminium Modern 103.92 Smt. 13029.00

Window Z-Section 3 In 1 Window Grill (Alluminium

Hollow pipe With MS Road Inserted) With one Sutter

Alluminium Mosquito Net and other Sutter glass

Thcikness 5mm With Mirror Effect Finish With Both

Sutter Having Locking Mechanisum, Openable Type

Hinged, Anodosed aluminum fittings and fixtures and

silicon sealant glass fixing to frame as per details etc

complete for window.

46 Providing and fixing flush door shutters, solid core 310.25 Smt. 6811.44

construction with WPC ( Wood Pannel Composite

Frame of Size 100 MM X 75 MM ) and shutter of

first class hard wood with cross band and face veneer

or plywood face panels with fixing both side 1mm

lamination sheet of good quality approved by

Engineer in charge ,including anodised alluminium

butt hinges with necessary screws with Knob lock,

hydralic door closer, Handle and Stopper 30 CM Long

(2) 35 mm thick.

Schedule - B 7 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

47 Providing and fixing FRP frame size 125x65 mm and 115.20 Smt. 2019.98

35mm thick FRP shutter with wood grain raised

panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The

core of the shutter & frame is to be filed up with

injected polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also taking

hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive

of S.S hinges with fastener sleeve & alluminium

fixtures & fastenings.

48 Providing and fixing stain less steel hand railing 0.90 119.30 Rmt. 4776.29

mt height by providing vertical support of 50 mm dia

bars. pipe on top 50 mm dia stain less steel pipe and

32x32 Pipe For Dessign horizontal & Vertical pipes

rail with vertical post of 50 mm dia with round ball on

top of post including bending welding and fixing in

R.C.C. parapet as directed.

49 GRC DECORATIVE JALI : Providing and fixing 254.70 Smt. 3803.66

Glass reinforced concrete (GRC) DECORATIVE

JALI cladding work ,GRC includes SDS screw from

front at 300 X 300 mm intervals with

modulethickness jali 40mm border and all inside

20mm thick and module thickness in solid area 40 &

20 mm & hollow at back side having alkali resistance

glass fibre type 3% minimum, compressive strngth

Mpa Minimumn, Fluxtural strength 10to12Mpa, dry

density 1.8to 2.0 MT/Cum havning 14% water

absorption, nesesary scaffolding worketc. complete as

per detail drawings & as suggested and directred by

Architect /EIC.

50 Providing and fixing in position collapsible steel 14.44 Qtl. 6119.93

shutters with vertical channels 20 x 10 x 2 mm braced

with flat iron diagonals 20 x 5 mm size with top and

bottom rails of T_rin 40x 40 x 6 mm with 38mm dia,

steel pulleys complete with bolts, nuts, locking

arrangements, stoppers handles including applying a

priming coat of red lead paint.

51 Providing and fixing M.S. grills of required pattern to 2651.25 KG 160.85

wooden frames of windows etc. with M.S. flats at

required spacings and frame alround, square or round

bars with round headed bolts and nuts or by screws.

(B) ORNAMENTAL GRILL.

Schedule - B 8 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

52 Applying priming coat over new steel and other metel 92.61 Smt. 36.42

surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming

paint brushing red lead.

53 Painting two coats (excluding priming coat) on new 63.73 Smt. 91.71

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter.

54 Providing and applying two coats (150 Micron) of hot 423.12 Smt. 343.40

applied bituminous paint of approved make and

quality over prepared surface of underground RCC

external wall, including cleaning the surface of all

dirt, loose particles, oil, grease, and other foreign

matter; heating and applying bitumen as per

manufacturer’s instructions; ensuring uniform

coverage; and curing as required. The application shall

be carried out to provide effective damp proofing and

protection against moisture ingress. Complete in all

respects as per specifications and instructions of the

Engineer-in-Charge.

55 Filling available excavated earth (excluding rock) in 734.57 Cmt. 136.92

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

56 Filling in plinth with sand under floors including 48.62 Cmt. 444.75

watering ramming, consolidating and dressing

57 Filling in foundation and plinth with murrum or 428.41 Cmt. 282.07

selected soil in layers of 20cm. thickness including

watering, ramming and consolidating etc. complete.

58 Providing & fixing 12mm thick toughened glass door 10.46 Smt. 7575.00

with enox fittings & also with floor spring of enox &

Locking system. note: - flooring cutting covered in

this item so no extra claim for vitrified / kotah/Granite

flooring as directed by engineer in charge

Schedule - B 9 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

59 Providing and fixing Structural Glazing with using the 43.80 Smt. 1262.50

17 Micron anodised of approved colour alluminium

section as transium, mullium of size 63.5mm x

38.1mm x 2 mm with using 6 mm thick reflective

structural glass (including toughning) and fixed with

silicone sealant and spacer tap and at corner sealed

neoprene foam dust and Air sealed gasket mirred

including scaffolding etc. Complete with all necessary

fitting and fixtures including openable window. etc

complete as per drawings and design supplied by

architect and instruction given by authority and E.I.C.

60 Providing and applying Zykoseal, a high-performance, 807.40 Smt. 1414.00

single-component, elastomeric acrylic waterproofing

membrane for bathroom floors and walls, ensuring a

seamless, joint-free barrier against water ingress. The

surface shall be properly prepared, cleaned, and

primed with Zykoseal Primer before application.

Zykoseal shall be applied in two coats by brush, roller,

or spray, achieving a dry film thickness of 1.0–1.5

mm, with reinforcement mesh at critical joints and

pipe penetrations. The membrane shall exhibit high

elongation (>250%), excellent crack-bridging (>2

mm), tensile strength (>1.5 MPa), and strong adhesion

to concrete (>1.0 MPa), with water impermeability as

per DIN 1048 and UV resistance per ASTM G154.

Typical coverage shall be 1.5–2.0 m²/kg for two coats,

with a drying time of 2–3 hours and full curing in 5–7

days at 25°C and 50% RH. work carried out by

instruction of engineer in charge.

61 Uncoursed Rubble Masonry with hard stone of 66.97 Cmt. 2590.50

approved quality in foundations and plinth in Cement

Mortar 1:5 (1-cement : 5-coarse sand including

levelling up etc. complete.

62 Providing throating or plaster drip and moulding to 138.60 Rmt. 43.05

R.C.C. Chhajja.

63 Box cutting the road surface to proper slope and 123.92 Cmt 109.08

camber for making a base for road work including

removing the excavated stuff and depositing on the

road side slope as directed upto 50Mt.lead.

Schedule - B 10 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

64 Construction of granular sub base by providing well 82.61 Cmt 804.97

graded crushed stone material (M.C.Metal 53 to

mm size 50%,M.C. metal 9.5 to 2.36 mm 20% and

sand below 2.36mm size 30%) spreading in uniform

layes with motor grader on prepared surface,mixing by

mix in place method with rotovator at O.M.C. and

compacting with three wheeler roller 8 T to 10 T to

achieve the desired density complete as per technical

specification Close graded Granular sub-base Material

as per clause 401 for grading -I well graded sub base

65 Proving and laying cement concrete Grade M200 (1- 61.95 Cmt 5705.49

cement : 1.5 sand : 3 coarse agg. Of 20mm nominal

size) for CC road and curring etc. comp. incl. cost of

form work. Finishing the cement concrete road by Tri-

mix process With Hardner inclusive of labour charges

for trimix vacume dewatering process on cement conc.

road by using vacume dewatering pump, surface

floater, including chanelling and making grooves &

rough finish to surface, providing expansion join,

construction joint incl. filling the joint with asphalt

filler as per direction by engineer in charge and as per

66 Providing and fixing pre-cast Rubber Dye / steel Dye 429.90 Smt 701.90

inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming

to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc.

Schedule - B 11 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

67 Road marking with hot applied thermoplastic paints 20.96 Smt 367.72

with reflectorising glass beads on bitumin surface

providing and laying a hot applied thermoplastic

compound 2.5 mm thick including reflectorising glass

beads @ 250gms per sqm area, thickness of 2.5mm is

excluding of surface applied glass beds as per IRC:35-

2015. The finished surface to be level, uniform and

free from streaks and holes. zebra patta /bump patta

lane/center line/ edge line/cut patta. The white color

marking should provide liminance coefficinet on

cemend road shalll be min 130 mcd/m2/lux and

Asphalt road shall be min 100 mcd/m2/lux during the

service life during the day time. The marking should

meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as

mentioned in the section-15 of IRC 35-2015.

Warranty for the Retro reflectivity should be two

68 Providing and Fixing C.I. Cover with frame 600mm x 2.00 Nos. 3681.37

850mm. Includind all material and Labour etc

69 Providing and Fixing Galvanised Mild steel tube 1.00 Rmt. 482.75

Medium Grade 80mm dia. Includind all material and

Labour etc Completed.

70 Providing and fixing Matt White/colour Europien WC 45.00 Each 13995.57

Wall Hung Primium Quality (with seat cover) with

integral 'p' or 'S' trap including jointing the trap with

PVC/CI soil pipe in C.M. 1:1 including seat cover

premium quality and PVC combi flush, including

Metropole Flush, Hand Shower (Health Faucet) & jet

Sprey, Toilet paper holder premium quality brand

with all accessories etc. complete.

71 Providing and fixing flat back Wash basin wall 61.00 Each 3093.63

mounted 550 x 405 x 205 mm size snow white with

C.I. or M.S. bracket including cutting holes and

making good the same including fixing Waste

coupling full thread, C.P. brass extension nipple

mm long, S.S. flange water super connection pipe

60cm. long and full thread waste coupling etc.

including Bottel Trap, Piller Cock, Angle Cock with

Fixing and Fixture with Angle cock to Piller cock

Coonected fixture complete.

Schedule - B 12 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

72 Providing and fixing flat back Wash basin 8.00 Each 6690.24

(COUNTER) Primium Quality, wall mounted 550 x

405 x 205 mm size snow white with C.I. or M.S.

bracket including cutting holes and making good the

same including fixing Primium Quality Waste

coupling full thread, C.P. brass extension nipple

mm long, S.S. flange water super connection pipe

60cm. long and full thread waste coupling etc.

including Bottel Trap, Piller Cock, Angle Cock with

Fixing and Fixture with Angle cock to Piller cock

Coonected fixture complete.

73 Providing and fixing Kitchen sink with C.I. or M.S. 5.00 Each 2621.95

brackets, painted white including cutting holes in

walls and making good the same but excluding

fittings. SS Sink Glosy ASIS 304 Grade x 1mm thick

with over all size 610x460 mm & bowl size With

Cromium plated bottle trap Etch Compted as

Instructed by Engineer In charge.

74 Providing and fixing Robe Hook on wall with all 68.00 Each 606.00

Laboure, fittings and accassary charges etc. completed

75 Providing and fixing Towel Ring Round with Round 68.00 Each 757.50

Flange including necessary S.S. screw and labour etc.

76 Providing and fixing Soap Dish Holder & Soap 68.00 Each 883.75

Dispenser Glass With SS Holder of PremiumBrand

including necessary S.S. screw with labour etc.

77 Providing and fixing Geometric Tumbler Holder of 68.00 Each 757.50

Premium Brand including necessary S.S. screw with

labour etc. complete.

78 Providing and fixing Gun metal check or non-return 72.00 Each 663.43

fullway wheel valve.(E) 40mm dia.

79 Providing, laying and jointing in true line and level 798.00 Rmt 743.65

PVC SWR pipes IS 13592 for Drain - 160 mm dia one

end plain and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such

as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement

including cost of all materials.

Schedule - B 13 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

80 Providing, laying and jointing in true line and level 441.40 Rmt 493.72

PVC SWR pipes IS 13592 for Drain - 110 mm dia

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe

shall be jointed with each other with rubber lubricant,

pipe shall be fixed on wall using of PVC clamp of the

size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

81 Providing, laying and jointing in true line and level 75 282.40 Rmt 373.03

diametre PVC SWR pipes with one end plain and

other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 75 mm

diametre x 149 mm length x 145 mm heigh at every

2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including

cost of all materials

82 Providing and fixing concealed center point to wall 763.20 Rmt 447.72

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable

water of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete. [E] 40mm

83 Providing and fixing concealed center point to wall 549.55 Rmt 253.82

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable

water of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete. [C] 25 mm.

Schedule - B 14 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

84 Providing and fixing concealed center point to wall 437.20 Rmt 170.36

ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for potable

water of following dia. nominal bore tube fittings and

clamps including making good the wall, ceiling and

floor etc. complete.[A] 15 mm.

85 Providing laying (to level or slopes) and jointing 45.00 Rmt 677.97

reinforced concrete Light duty non-pressure pipes I.S.

class NP2 of the following internal diameter with

collars and butt ends prepared for collar joints

including testing of joints complete.(D) 300mm.

86 Providing and fixing PVC SWR Nahni trap IS 14735 84.00 Each 733.26

for drain - 100 mm diameter with jali of the following

nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of

cutting and making good the walls.

87 Constructing brick masonary chamber for under 32.00 Each 2932.93

ground C.I. inspection chamber and bends with bricks

having crushing strength not less than 35 kg/cm2 in

cm. 1:5 C.I. cover with frame (light duty) 455mm. x

610mm. internal dimensions, total weight of cover

with frame to be not less than 38kgs (weight of cover

23kg and wt. of frame 15 kg.) R.C.C. top slab with

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregates 20mm. 'size) foundation concrete 1:5:10

inside laster 15mm. thickwith cementmortar 1:3

finished smooth with a floating coat of neat cement

on walls & bed concrete etc. complete. (i) Inside

dimensions, 455mm. x 610mm. and 450 mm. deep for

single pipe line.

Schedule - B 15 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

88 Constructing Manhole with R.C.C. top slab in 1:2:4 10.00 Each 11042.74

mix (1-cement :2-coarse sand : 4-graded stone

aggregate 20mm nominal size) foundation concrete

1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats

+ 50mm size) inside plastering 15mm thick with

Cement Mortar 1:3 (1-Cement : 3-coarse sand)

finished with a floating coat of neat cement and

making channels in cement concrete 1:2:4 mix (1-

Cement :2-Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete including

curing and festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with frame size

560mm diameter total weight of cover and frame to be

not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of

frame 64 Kg.)(A) With 230mm thick walls of brick

msonry using brick having crushing strength not less

than 35Kg. /Sq.cm. in Cement Mortar 1:5 (1- Cement:

5-Coarse sand) (1) A type depth 0.90 Metre for

150mm diameter sewer.

89 Providing and Fixing Water Mixer for Cool and Hot 68.00 Each 4898.50

Water of primium quality, with two Inlet of hot and

cool water with Two out let, including Required all

fixtures like Chromium plated bends, pipes Disk etc.

Completed as per Instructed by Engineer incharge.

90 Providing and fixing screw down bib taps of 80.00 Each 186.83

following size.(A) Brass screw down bib tap polished

bright. (i) 15mm dia.

91 Providing erecting and fixing double coated ISI water 30000.00 Litre 3.95

tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

92 Providing and fixing S.W. gully trap with C.I. grating 32.00 Each 1246.92

brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard

weight.(i) Square mouth traps.(B) 150mm x 100mm

size P or R type.

93 Providing and installing high-quality, non-slip floor 75.00 Each 1102.92

mats. ensuring durability, safety, and aesthetic

suitability. The mats should be made from durable,

easy-to-clean materials, resistant to wear, moisture,

and dirt, with anti-slip backing for added safety.

94 Providing and fixing C.P. brass shower rose with 66.00 Each 282.16

15mm or 20mm inlet.(A) 100mm dia. Each.

95 Providing and fixing in position cowel went to 48.00 Each 393.04

pipes.(B) 75mm dia.

Schedule - B 16 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

96 Providing and fixing Matt White/colour Europien WC 22.00 Each 16217.57

Wall Hung(Pure Extended Wall Mounted Closet)

Primium Quality (with seat cover) with integral 'p' or

'S' trap including jointing the trap with PVC/CI soil

pipe in C.M. 1:1 including seat cover premium quality

and PVC combi flush, including Conceal Flush Tank,

Hand Shower (Health Faucet) & jet Sprey, Toilet

paper holder premium quality brand with all

accessories etc. complete.

97 Providing and fixing water closet squatting Pan 4.00 Each 6054.95

(Indian type W.C. Pan) size 580mm (Earthwork, bed

concrete, foot reste and trap to be measured and paid

for separately) (A) Vitreous China.(I) Long pattern =

98 Providing junction chamber for rain water harvesting 8.00 Each 2119.99

including excavation size 0.60 x 0.60 x 0.70m with

CC 1:2:4, foundation walls of half brick maosnary

CM 1:4 & plastering 15mm thick CM 1:3 with 50mm

thick CC flooring with RCC top slab 75mm thick etc.

99 Providing filter chamber of size 2.10 x1.25 x1.33m 2.00 Each 24842.97

with CC 1:2:4 for foundation to brick masonary walls

23cms thick in CM 1:5 with RCC top slab 0.60 x0.75

in 75mm thick & filling 30cms.kapchi of 25mm

size,90cm.thick layer of sand etc. complete as

100 Providing water harvesting pit of 2.00 mt x 2.00mt x 2.00 Each 62129.14

4.00 mt. size for water logging with Excavation in any

strata upto four meter depth, filling the pit with brick

bats in 0.60 mt. depth with 25-40mm kapachi, 0.30 mt.

depth and 2.0 mt. depth with coarse sand in layers

including making P.V.C. line for water inlet etc. as

directed with 250mm dia bore 35 mt. depth and

150mm dia P.V.C. pipe of 10 Kg. f/Cm2 casing with

gravel packing or as directed.

101 Providing and Fixing ABC stored Fire Extinguisher 6 50.00 Nos 2222.00

Kgs Capacity complete in all aspect confirming to IS

15683 with ISI mark multipurpose as per instruction

of Engineer in charge.

102 Providing and Fixing CO2 Fire Extinguisher 4.5 Kgs 50.00 Nos 5706.50

Capacity complete in all aspect confirming to IS

15683 with ISI mark (Especially for Electrical Fire) as

per instruction of Engineer in charge

Schedule - B 17 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

103 Supplying FIRE bucket round bottom of 9 litres 12.00 Nos 449.45

capacity made out of 24 gauge G.I. sheet with extra

handle at bottom duly painted white inside and Red

out side with FIRE mark, filled with dry-sand and kept

on existing stand provided or hung on wall hook.

104 Supplying and erecting floor mounting stand for 3.00 Nos 1100.90

keeping four nos. of FIRE buckets comprising

1500mm in lenght, 900mm height frame made out of

30mm x 30mm x 4mm angle from with cross supports

for legs, welded with 4 hooks and duly painted with

one coat of red lead and two coats of approved

enamelled silver paint.

105 Providing and fixing AUTOGLOW Signages in Block 42.00 Nos 555.50

/ Small Letters of Specified Sizes: as per design and

requirement as directed by EIC

106 Fire Service In-let (In-let Connection for Fire Brigade)- 3.00 Nos 4494.50

2 Way Type. Supply, Installation and Testing of: Fire

Service Inlet with necessary hardware and

consumables. MOC:-Body: Heavy- uty CI.

Couplings/NRV: Gunmetal. Standard: -Made As per

IS Standard- Heavy duty quality. Size:-Couplings:

mm, 100 mm E-table Flange End .MAKE : Zoloto

107 Butterfly Valve :- Providing fixing testing and 6.00 Nos 5302.50

commissioning of C.I. butterfly valve of class PN

rating PN10, of following sizes. dia, Sant brand.(I.S.I)

MOC:-Body: Cast Iron, Disk: SS, Seat: Nitrile.

MAKE : Zoloto /Audco /Kartar /REDEXA) 80 or

mm as per Requirement

108 Short Branch Pipe Nozzle. Supply, Installation and 12.00 Nos 1868.50

Testing of: Short Branch-pipe Nozzle. MOC:

Stainless Steel (SS-304). Standard: ISI Marked,

Heavy Quality. Test : 21 Kgf/cm2 No. MAKE :

newage/ Aaag/ Swati/ REDEX.

109 Cabinet For Fire Hose (Hose Box)- Single door Type 12.00 Nos 4898.50

Supply, Installation and Testing of: Fire Hose Cabinet

(Hose Box) suitable to accommodate 15 m long fire

hoses and 01 no. of nozzle. With Lock-n-key facility.

Wall Mounting Design. MOC: 16 Gauge MS Box

with Powder Coating Standard with 15mtr. Hose pipe

with male female coupling ISI complete set aluminum

male female coupling 15mtr. Hose pipe SS biding

Extra Advantages of aluminum Lifelong durability. *

No theft being aluminum no resale valve Hydraulic

Test : 21 Kgf/cm2 * No Breakages- As per uidelines.

Size:- Suitable MAKE : newage /Aaag /Swati

Schedule - B 18 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

110 Fire Hose reel drum - 63 mm x 30 m Supply, 12.00 Nos 5201.50

Installation and Testing of: Fire Hose with Hose

Couplings. RRL (ISI Mark- Type A) Fire Hose. Hose

Couplings: ISI Marked Stainless Steel. With SS Wire

Binding. Standard: - ISI Marked & TAC Approved

Hose. Size:-63 mm dia x 30 m long Hose. MAKE :

newage /Aaag /Swati /REDEX.

111 Fire Hydrant Landing Valve (Stainless Steel (SS-304), 12.00 Nos 4898.50

ISI Marked): Supply, Installation and Testing of: Fire

Hydrant Landing Valve with necessary pipe fitments,

hardware and consumables. Stainless steel 63 Female

single outlet type – “B“Hydraulic,Test : 21 Kgf/cm2

202 working parts, Water Test : Water tightness

14kgf/cm2, Flow Test : 900 LPM at 7 kgf/cm2, MOC:-

Body: Stainless Steel (SS-304), Working Parts:

Stainless Steel (SS-304), Coupling: Stainless Steel

(SS-304), Standard: -ISI Marked. Size:-63 mm

(Flange End: NB 75 mm, PCD 160 mm) MAKE :

newage /Aaag /Swati /REDEX.

112 NON- Return Valve Dual Plant Supply, Installation 3.00 Nos 7322.50

and Testing of conforming to IS: 5312 complete with

rubber gasket, GI bolts, nuts, washers etc. as required

with necessary pipe fitments, hardware and

consumables. MOC:-Body: Gunmetal / SS. 80 mm

113 NON- Return Valve Dual Plant Supply, Installation 3.00 Nos 10958.50

and Testing of conforming to IS: 5312 complete with

rubber gasket, GI bolts, nuts, washers etc. as required

with necessary pipe fitments, hardware and

consumables. MOC:-Body: Gunmetal / SS. 100 mm

114 Pressure Gauge with Siphon Tube and Cock. Supply, 3.00 Nos 1868.50

Installation and Testing of: Pressure Gauge with

Siphon Tube and Cock. MOC:-100 mm Dial- Glycerin

filled- Stainless Steel Body Pressure Gauge with GI

Siphon Tube and Brass Cock. Size:-Dial: 100 mm

Range: 0 – 15 Bar (kg/cm2) for 80 mm.

115 Pressure Gauge with Siphon Tube and Cock. Supply, 3.00 Nos 2171.50

Installation and Testing of: Pressure Gauge with

Siphon Tube and Cock. MOC:-100 mm Dial- Glycerin

filled- Stainless Steel Body Pressure Gauge with GI

Siphon Tube and Brass Cock. Size:-Dial: 100 mm

Range: 0 – 15 Bar (kg/cm2) for 100 mm.

Schedule - B 19 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

116 Piping for Fire Safety Works Providing & Laying 'C' 100.00 Rmt 1565.50

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above ground

pipe. with necessary pipe itments (Flanges, Bands,

Socket etc.) Vertically every 3 mt. & Horizontaly

every 2.5 mt. painted with one coat of primer (Zinc

Oxide) & two coats of finshing paints GI support /

Clamps / Hangers/pipe etc. Hardware (Gaskets, Nut-

Bolts, Paint etc.) Consumables (Welding Rod etc.)

and labour charge. Quality : GI, C-Class (Heavy).

Make - Jindal / Asian Note : The piping installation

has to be put to hydraulic test to1.5 times Working

pressure before applying paint or pipe coating and

wrapping etc. Complete.................80 mm diameter.

117 Piping for Fire Safety Works Providing & Laying 'C' 200.00 Rmt 1868.50

Class Heavy G.I. pipe laying. Supply, fabrication,

installation, hydro testing & painting of above ground

pipe. with necessary pipe itments (Flanges, Bands,

Socket etc.) Vertically every 3 mt. & Horizontaly

every 2.5 mt. painted with one coat of primer (Zinc

Oxide) & two coats of finshing paints GI support /

Clamps / Hangers/pipe etc. Hardware (Gaskets, Nut-

Bolts, Paint etc.) Consumables (Welding Rod etc.)

and labour charge. Quality : GI, C-Class (Heavy).

Make - Jindal / Asian Note : The piping installation

has to be put to hydraulic test to1.5 times Working

pressure before applying paint or pipe coating and

wrapping etc. Complete.................100 mm diameter.

Schedule - B 20 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

118 Supplying & erecting approved control cubical panel 1.00 Nos 65650.00

(Star - Delta) made from16 G. CRCA sheet duly

painted with epoxy powder painted inside and outside

with hinged doors and locking arrangement, consisting

of suitable size of ON- OFF isolator (AC - 3/23 duty)

main fuses, single phasing preventer cum water level.

Guard (Complete unit), Toggle switch to by pass

Single phase preventer cum WLG, indicating lamps

for R- YB phases, over load relay, Automatic water

level controller, Ammeter & Voltmeter each with two

way selector switch incoming wires duly socket

Crimped, Panel to be erected on angle iron frame

grouted on wall as directed. Star Delta & main

contactor, overload relay, thermal / Electronic Star

delta cutoff timer, start - stop push buttons. The

isolator overload relay & contactors of L& T,

Siemens, Redex or Cuttler Hamer make only. Panel to

be erected on angle iron frame ground on wall.

119 Supplying, installation, testing and commissioning of 1.00 Nos 368650.00

Diesel Engine Driven Main Fire Pump suitable for

automatic operation and consisting of following: (a)

Horizontal, centrifugal, back pullout pump to ensure a

minimum pressure of 3.5 kg / sq.cm. at highest and farthest

outlet at specified flow of 1620 lpm at 50m. head

conforming to IS standards. (b) Diesel engine of

RPM water cooled type with radiator conforming to

relevant BS & IS standard complete with auto starting

mechanism, 12 volts/24 volts electric starting equipment,

Diesel tank, exhaust pipe extended up to 1 m. outside pump

house duly insulated with 50 mm. thick glass wool with

mm. thick aluminium sheet cladding, residential silencer,

instruments and protection as per specification, stop

solenoid for auto stop in the event of fault with audio

indications, painted with post office red colour etc. as

required. (C) 1 no. 2 hours capacity day diesel storage tank

fabricated from 3 mm thick M.s plates. Tank shall be

provided with inlet, outlet, overflow, air vent, drain

connections, filling connection and megnatic level

indicator. Tank shall be mounted on a suitable steel

structure (painted with 2 coats of red oxide paint). tank

shall be provided with epoxy coat from inside & two or

more coats of synthetic enamel paint outside over two coats

of red oxide primer.(D) 24 volts 180 AH lead acid battery

(12 volts- 2 Nos) with boost/trickle charger for starting the

engine automatically complete as required.(E) Common

Base plat for Pump and engine and coupling, coupling

guard and other accessories as required for complete

installation of pump set.Price Per Complete set of Pump +

Motor + Accessories.

Schedule - B 21 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

120 Supplying, installation, testing and commissioning of 1.00 Nos 63125.00

electric driven pressurisation pump suitable for

automatic operation and Jockey Fire Pump

Lubi/Redex make SITC of: Back Pull-out End Suction

Type - ingle Stage, Self Priming, Centrifugal Pump

for Jockey Fire Pump with Electric Motor,

Mechanical Seal, Base-frame and Couplings. MOC:-

Casing-CI, Impeller- Bronze, Shaft- SS 410, Sleeve-

SS410. Flow Capacity: 1250 LPM Head: 50 mtr

Speed: 2900 RPM Pump shall be capable of

furnishing not less than 150% of rated capacity at a

head not less than 65% of rated head The shut off

head shall exceed 120% of rated head. UOM:-Price

Per Complete set of Pump + Motor + Accessories.

121 Main Fire Hydrant Pump Lubi/Redex make SITC of: 1.00 Nos 99485.00

Back pull out type -Single Stage, Self Mriming,

Centrifugal Pump for Main Fire Pump with Electric

Motor, Meachanical Seal, Base frame and Couplings.

MOC:-Casing-CI, Impeller- Bronze, Shaft- SS

Sleeve- SS410. Flow Capacity: 1250 LPM Head:

mtr 2900RPM Pump shall be capable of furnishing

not less than 150% of rated capacity at a head not less

than 65% of rated head he shut off head shall exceed

120% of rated head. UOM:-Price Per Complete set of

Pump + Motor + Accessories.

122 Providing and fixing of push button or break glass 16.00 Nos 2373.50

type Manual Call point made form impact resistance

ABS Plastic Material red colour of IP 65 Rating with

suitable interfacing with control panel with fabrication

, installation and labeling on site etc complete.

123 Providing and fixing of Hooters with powder coated 16.00 Nos 3282.50

durable finish with loud clear sound of 105 - 120 DB

for fire alarm singaling with mounting on celing or

wall and properly tested for functionality, including

sound output, power supply, and emergency response.

Schedule - B 22 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

124 Providing and fixing of Smoke detectors , capable of 42.00 Nos 2171.50

detecting smoke or particulate matter in the air with

Microprocessor-based detection with integrated

circuitry for improved accuracy and reduced false

alarms and should have Visual (LED) or audible

(buzzer) indicators for system status or fault detection.

Humidity and Temperature Range: -10°C to 50°C,

humidity: up to 95% RH non-condensing with

instalation , testing labeling and documentatin etc

125 Providing and fixing of Alarm Panel 04 ZONE 1.00 Nos 28785.00

COVENTIONAL Fire Alarm Panel powder coated

with led display AC input supply: 220 V AC 50 H2

Operating voltage: 24 V DC , Maximum No. Of

Detectors: 20 No. n each Zone Compatible with all

types of conventional detectors 128 event memory log,

LCD continues display current date & Time with

current status of each Zone , with 2- line 16- character

LCD display , user password protection and LCD and

LED indication for Fire, OPEN, SHORT and

ISOLATE of each Zone with installation and testing

of panel functionality, checking zone indicators, alarm

triggers, and relay operations to confirm system is

fully operational including test certificates and

approval from local fire authorities, after the system is

installed and tested.

126 Supply & Laying of 2core, 1.5 sq. mm. stranded 840.00 Rmt 111.10

copper conductor, pvc insulated PVC sheathed,

aluminum myler tape shielded FRLS armoured cable.

Schedule - B 23 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

127 SSF Executive Table with Keyboard Tray and 2.00 Each 22253.33

Pedestal / Side Storage Unit, Providing and supplying

wooden table having size of 1830 MM x 910 MM x

760 MM Height. BASIC STRUCTURE:

The basic structure of the table shall be made out of

18 mm thickness Plywood all proof ( IS 710 ) with all

open edges covered with indian teak wood beading.

The top shall be of 36 mm thickness plywood .

The basic structure of the drawer unit shall be made

out of 18 mm ply. It will have series of drawers (1

small at top & 3 of equal height below the same),

made out of 12 mm thickness plywood sides, 8 mm

thickness plywood at bottom & 18 mm ply front facia

& side supports with sliding telescopic channels. And

covered with all exposed are of the drawer using with

indian teak wood beading and laminate as per required

size shall be fixed between each drawers. Design and

Colour As per direction of engineer incharge.

Schedule - B 24 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

128 Revolving Chair : 2.00 Each 6211.50

Supplying and Placing Revolving chair. 1. SEAT

ASSEMBLY – The seat is made up of 1.4±0.1 cm thick –

pressed plywood upholstered with fabric and moulded

polyurethane foam.2. BACK ASSEMBLY– The back is

injection moulded in Glass filled Polypropylene which is

upholstered with Mesh fabric .The back consist of adjustable

Lumbar support made of injection moulded Polypropylene

having an adjustment of 5.0 ±0.1cm. Back Size : 44.5 cm(W)

× 57.5cm (H)3. POLYURETHANE FOAM– The

polyurethane foam for seat is of density = 30±2kg/m3.4.

ARMRESTS ( AJUSTABLE) – The height adjustable armrest

is made of Polypropylene and can be adjusted to 6.0 ±

cm height .It also has swivel and To and Fro adjustment with

moulded PU armtop. 5. MECHANISM – The mechanism is

designed with the following features. • 360 degree revolving

type.• Centre tilt syncro.• 4 position (including upright lock)

giving option of variable tilt angle to the chair.6. HEADREST

– The Headrest is made up of injection moulded Polypropylene

which upholstered with foam and fabric . Its has an adjustment

of 3.0 ± 0.1 cm & its assembled over GRETA Mid back

Chair.7. PNEUMATIC HEIGHT ADJUSTMENT – The

pneumatic height adjustment is chrome plated with an

adjustment stroke 0f 10.0 ± 0.3 cm .8. PEDESTRAL

ASSEMBLY – The pedestal is injection moulded Nylon and

fitted with 5nos. twin wheel castors . The pedestal is 66.0 ±

cm P.C.D.9. TWIN WHEEL CASTORS – The twin wheel

castors are injection moulded in black Polypropylene having

5.0 ± 0.01cm wheel Diameter. Work shall be carried out

complete as per direction & satisfaction of Engineer in charge.

For All Floors.

129 Double Bed With Head Board : 55.00 Each 21397.86

Providing & fixing Single Bed with headboard

fabrication framing. Headboard ms pipe 1 thick. All

necessary fixtures and fasteners included. All exposed

edges shall be covered with powder coated. Bed first

painted one coat of primer & two coats of paint of

matching shade to the other finished surfaces.

Complete as per drawings and as per instructions of

Architect & Engineer-in-charge.

(Size 1800 x 2000 x 350(H) mm overall).

Schedule - B 25 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

130 Single Bed with Headboard : 43.00 Each 14841.95

Providing & fixing Single Bed with headboard

fabrication framing. Headboard ms pipe 1 thick. All

necessary fixtures and fasteners included. All exposed

edges shall be covered with powder coated. Bed first

painted one coat of primer & two coats of paint of

matching shade to the other finished surfaces.

Complete as per drawings and as per instructions of

Architect & Engineer-in-charge.

(Size 900 x 2000 x 350(H) mm overall).

131 Bed Side table : 140.00 Each 2878.50

Providing & fixing 19mm thick Plywood BWR

framing & 2 Nos of drawers. 4mm thick Veneer &

Full-core Laminate outside as/drawing &

selection.0.8mm thick Liner laminate inside drawers.

Drawers to be fixed with Telescopic roller channels,

handle etc. complete with beading patties and all

required hardware. All exposed edges shall be covered

with Teak wood beading Patti. All exposed wooden &

veneer faces to be finished with matt finish melamine

polish. Complete as per drawings and as/instruction of

Architect & Engineer-in- charge.

(600 x 300 x 250(H)mm overall)

132 Double Bed Mattress & Pillow : 55.00 Each 16763.43

Providing & Supplying Double Bed Mattress 150mm

thick, primary construction with memory foam with

density & best quality . Finishing Super soft HR foam

top most layer, with 100 GSM cotton felt layer on top,

Covered with premium knitted fabric with edge

support system with support and foam encasing to

avoid sagging and edge roll off. 1 Nos.Bombay Dying

or equivalent brand double bed sheet. Bed - runner as

selection by, 2 Nos. pillows with cover of size 24” x

16” Recron or equivalent brand. Complete as per

drawings and as /instruction of Architect & Engineer-

in-charge. (Mattress Size 2000 X 1800 X 150 (H) mm

overall, Pillow Size - 450 X 650)

Schedule - B 26 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

133 Single Bed Mattress & Pillow : 41.00 Each 6676.27

Providing & Supplying Single Bed Mattress 150mm

thick, primary construction with memory foam of

density & best quality. Finishing with a super-soft HR

foam topmost layer, with a 100 GSM cotton felt layer

on top. Covered with premium knitted fabric with

edge support system and foam encasing to avoid

sagging and edge roll-off. 1 Nos. Bombay Dying or

equivalent brand single bed sheet. Bed runner as

selected by Architect. 2 Nos. pillows with covers of

size 24” x 16”, Recron or equivalent brand. Complete

as per drawings and as per instructions of Architect &

Engineer-in-charge. (Mattress Size 2000 x 900 x

150(H) mm overall), (Pillow Size - 450 x 650 mm).

134 TV Unit : 55.00 Each 4292.50

Providing & fixing TV Unit 18mm thick Plywood

BWR framing, backside pack 1.2mm thick Veneer &

Full core Laminate outside as/drawing & selection.

1.2mm thick Veneer & Full-core Laminate as per

drawings & selection. 0.8mm thick Liner laminate

inside. 40 mm gap between wall and cabinet for

passing of TV cables. All exposed wooden & veneer

faces to be finished with matt finish melamine polish.

Painting All remaining non-visible faces & edges shall

be painted with enamel (oil) paint of matching shade

of other finished surfaces. Remarks Complete as per

drawings and as/instruction of Architect & Engineer-

in-charge. (Size :- 1200 X 300 X 250 (H) mm overall)

135 Centre Table : 11.00 Each 4545.00

Providing & Supplying Center Table Kiln dried &

treated fine quality Metal Legs with Powder Coating.

Top and Middle part of Table covered with wood

piece with varnished as according to attach reference

image. All exposed edges shall be neat and clean. All

outer faces to be finished with matt finish melamine

polish. Painting All remaining non-visible faces &

edges shall be painted with enamel (oil) paint of

matching shade of other finished surfaces. Remarks

Complete as per drawings and as / instruction of

Architect & Engineer-in charge.

Schedule - B 27 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

136 Three Seated Sofa : 10.00 Each 33444.70

Providing & Supplying Three Seated Sofa Kiln dried

& treated fine quality C.P. Teak wood Legs & 19mm

thick Plywood BWR structure. Finishing 45 Kg/M2

Density HR foam (M22) with required Thickness as

per design in Seat & Back and Arm rest portion, this

should be again covered with 30 Kg/M2 Density

14mm thick HR foam with madarpat cover on it &

upholstered fabric of suggested shade & finishon Seat,

Back & all visible side as per drawing. Hardware. All

necessary fixtures & fasteners including anti slip leg

pads. Polishing All exposed edges shall be covered

with Teak wood beading Patti. All exposed wooden &

veneer faces to be finished with matt finish melamine

polish. Painting All remaining non-visible faces &

edges shall be painted with enamel (oil) paint of

matching shade of other finished surfaces. With 3 Nos

Pillow. Remarks Complete as per drawings and

as/instruction of Architect & Engineer-in-charge.

(Size 2250 X 750 X 810(H) mm overall

137 Two Seated Sofa : 3.00 Each 14460.98

Providing & Supplying Two Seated Sofa Kiln dried &

treated fine quality C.P. Teak wood Legs &!9mm

thick Plywood BWR structure. Finishing 45 Kg/M2

Density HR foam with required Thickness as per

design in Seat & Back and Arm rest portion, this

should be again covered with 30 Kg/M2 Density

14mm thick HR foam with madarpat cover on it &

upholstered fabric of suggested shade & finishon Seat,

Back & all visible side as per drawing. Hardware. All

necessary fixtures & fasteners including anti slip leg

pads. Polishing All exposed edges shall be covered

with Teak wood beading Patti. All exposed wooden &

veneer faces to be finished with matt finish melamine

polish Painting All remaining nonvisible faces &

edges shall be painted with enamel (oil) paint of

matching shade of other finished surfaces. With 2 Nos

Pillow. Remarks Complete as per drawings and

as/instruction of Architect & Engineer-in-charge

(Size 1 100 X 750 X 810 (H) mm overall)

Schedule - B 28 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

138 One Seated Sofa : 8.00 Each 14456.70

Providing & Supplying One Seated Sofa Kiln dried &

treated fine quality C.P. Teak wood Legs &19mm

thick Plywood BWR structure. Finishing 45 Kg/M2

Density HR foam with required Thickness as per

design in Seat & Back and Arm rest portion, this

should be again covered wth 30 Kg/M2 Density

14mm thick HR foam with madarpat cover on it &

upholstered fabric of suggested shade & finishon Seat,

Back & all visible side as per drawing. Hardware. All

necessary fixtures & fasteners including anti slip leg

pads. Polishing All exposed edges shall be covered

with Teak wood beading Patti. All exposed wooden &

veneer faces to be finished with matt finish melamine

polish Painting All remaining nonvisible faces &

edges shall be painted with enamel (oil) paint of

matching shade of other finished surfaces. With 1 Nos

Pillow. Remarks Complete as per drawings and

as/instruction of Architect & Engineer-in-charge.

(Size :- 1 100 X 750 X 810 (H) mm overall

139 Study Table : 8.00 Each 5135.60

Providing & fixing Study Table 19mm thick Plywood

structure. 4mm thick Veneer & Full-core Laminate

outside as/drawing & selection. Hardware All

necessary fixtures & fasteners. Polishing All exposed

edges shall be covered with Teak wood beading Patti.

All exposed wooden & veneer faces to be finished

with matt finish melamine polish. Painting All

remaining non-visible faces & edges shall be painted

with enamel (oil) paint of matching shade of other

finished surfaces. Remarks Complete as per drawings

and as/instruction of Architect & Engineer-in-charge.

(Size 1200 X 450 X 750(H) mm)

Schedule - B 29 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

140 Study Chair : 8.00 Each 5243.45

Providing and supplying Study table Chair the seat &

back are made of 1.20cm thick hot pressed plywood

upholstered with fabric and molded PU foam, together

with molded seat & back covers. The back foam

should be designed with contoured lumber support for

extra comfort. The size of chair 45cmx53cm (Back

side) and 52cmx48cm (seat size). The PU foam should

be molded with density =45 ± 2 kg/m3 .with One

piece armrests. The armrests are scratch and weather

resistant. The permanent contact mechanism is

designed with 360° revolving type, with pneumatic

height adjustment. Size, SPIan, Elevation And Section

as Per attached Drawing

141 Low Height Cupboard : 35.37 Smt 4292.50

19mm thick Plywood structure. Finishing 1mm thick

Decorative Laminate sheet as/drawing & selection.

0.8mm thick Liner laminate inside. Shutters &

Drawers to be fixed with required hinges, Magnets,

Locks, Telescopic roller channels, handle etc.

as/drawing. Hardware All necessary fixtures &

fasteners. Polishing All exposed edges shall be

covered with 8mm thick Teak wood beading Patti. All

exposed wooden & veneer faces to be finished with

matt finish melamine polish. Painting all remaining

non-visible faces & edges shall be painted with

enamel (oil) paint of matching shade of other finished

surfaces. Remarks Ply-shelves removable type,

supported on side teak wood battens on both sides.

Depth of the Cupboard Should be 500mm. Complete

as per drawings and as/instruction of Architect &

Engineer-in-charge. Refer image

Schedule - B 30 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

142 Full Height Cupboard : 31.39 Smt 4898.50

Providing and fixing Full Height Storage Cabinet of

size as directed as per architect drawing of 0.45 mt.

depth including 19 mm plywood shutter of green or

century make of BWR confirming to IS 710 including

drawer, shutters & shelves as per drawing as directed

including fixing approved colour lamination of

mm thick of green or bloom make to exposed surfaces

& 0.80 mm thick white laminations inside of Two

drawer & shutters including SS accessories, Godrej

lock, telescopic channel of Hettich, sleek or efficient

make, Ghana teakwood beading melamine polish to

exposed faces grooves & design. Depth of the

Cupboard Should be 500mm as per architect drawing

for all lead and lift etc. complete.

143 SS Name Plate : 74.00 Each 5982.97

Providing & Supplying SS Name Plate 1.5mm thick

SS 304 matt finish sheet, fixed on 12mm thick

Plywood. Vinyl lettering (colour specified by

Architect), size & no. of letters, size of logo etc. as

required. All necessary fixtures & fasteners including

SS Studs for name plates and information board.

Complete as per drawings and instructions of

Architect & Engineer-in-charge.

144 Cup Board Cum Dressing unit with stool & Mirror : 32.20 Smt 9595.00

Providing & fixing 19mm thick Plywood BWR Grade

framing. 4mm thick Veneer Full-core Laminate

outside. 0.8mm thick iner laminate inside. Shutters to

be fixed to cupboard unit with handle, hinges, magnet,

complete with beading patties and all required

hardware Hardware Telescopic roller channels for

drawers,! 9mm dia. SS hanger pipe, Locking etc. with

all necessary fixtures and fasteners. Base material

9mm thick Plywood framing & 2 Nos. of drawers.

Finishing 4 mm thick Veneer outside. Dressing table

top to be finished with Full-core Laminate

as/drawings & selection. 5mm thick Mirror with

polished edge to be fixed on Ply with SS 304 Studs

0.8mm thick iner laminate inside drawers. Drawers to

be fixed with Telescopic roller channels, handle etc.

complete with beading patties and all required

hardware. Mirror shall be fixes on outside of door, all

side of mirror shall be jointed with sealent. Providing

Stool as per Selection by Enginner in Charge.

Schedule - B 31 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

145 Curtain with Pelmet: 158.29 Smt 1515.00

The double-layered window curtain consists of a

premium satin fabric (120–150 GSM, 100%

polyester/silk-blend) with floral embroidery, paired

with a blackout/dim-out inner lining for light and

thermal insulation. The panels feature double-stitched

seams, a 3-inch reinforced top hem with SS rod

pocket, and weighted bottom hems for optimal drape.

Pelmet Frame 18 mm. thick and 150 mm. wide pellet

of Playwood. Hardware includes a Grade 304/316

stainless steel rod (25–32 mm diameter, telescopic

adjustment), anti-rust gliding rings with nylon

bearings, and heavy-duty wall brackets.

146 Shoe Rack : 57.00 Each 7059.90

Providing and fixing shoe rack of sixe ( 1200 X

X 395 MM ) made on wooden frame and shutter and

frame thickness of 18 mm thk of ply both side of

plywood is camouflaged with 1.0mm thick laminate

including Lamination of Drawers of approved shade

(Royale touché / Century ) and all as per the drawing

Incl Jointing, haking,nailing,and fixing in position. all

inclusive ETC all complete All fixture, fixing and

finishing to be done as per requirement of client.

147 Cupboard Paneling : 29.76 Smt 3181.50

Providing and Fixing cupboard of outer frame

Required size it includes the door with all accessories

to achieve the desired finish and design. Material :-

mm thick water proof ply wood is fixed as according

to drawing and both side of plywood is camouflaged

with 1.0mm thick laminate including Lamination of

Drawers of approved shade (Royale touché / Century )

and all as per the drawing Incl Jointing,

haking,nailing,and fixing in position. all inclusive

ETC all complete.. Inclusive of Sliding Door channels

/ Hinges/Door lock /cupboard lock/ / handles/ legs/ :-

SS Finish with approved Brand and design.All fixture,

fixing and finishing to be done as per requirement of

Schedule - B 32 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

148 Plain Gypsum Board Ceiling : 2823.01 Smt 838.30

Providing & fixing suspended false ceiling, which

includes Gypsteel ULTRA™ CRP surface ribbed

perimeter channels (having one flange of 20mm and

another flange of 30mm and a web of 27mm) along

the perimeter of ceiling, screw fixed to brick

wall/partition with the help of nylon sleeves and

screws, at 610mm centres. Then suspending Gypsteel

ULTRA™ CRP surface ribbed intermediate channels

of size 45mm (with two flanges of 15mm each) from

the soffit at 1220mm centres with Gypsteel ULTRA™

CRP surface ribbed ceiling angle of width

25mmx10mm fixed to soffit with GI cleat and steel

expansion fasteners(Mfg by Saint Gobain Gyproc).

Then Gypsteel ULTRA™ CRP surface ribbed Ceiling

section of having web of 51.5mm and two flanges of

26mm each with lips of 10.5mm are then fixed to the

Gypsteel ULTRA™ intermediate channel with the

help of connecting clip and in direction perpendicular

to the Gypsteel intermediate™ channel at 457mm

centres. Single layer of 12.5mm tapered edge

Gyproc® MR (conforming to IS 2095 part 1, 2011) is

then screw fixed to ceiling section with 25mm drywall

screws at 230mm centres. Single layer of 12.5mm

tapered edge Gyproc® MR (conforming to IS

part 1, 2011) is then screw fixed to ceiling section

with 25mm drywall screws at 230mm centres. Screw

fixing is done mechanically either with screw driver or

drilling machine with suitable attachment. Finally

square and tapered edges of the boards are to be

jointed and finished so as to have a flush look which

includes filling and finishing with Gyproc Jointing

compound and Gyproc Joint Paper tape (as per

recommended practices of Saint- Gobain Gyproc

India) including cost of required Cut-Outs,

finishingitems /Scaffolding, and for all heights as per

complete as per instruction of engineer-in charge and

Schedule - B 33 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

149 Pvc False Ceiling : 196.78 Smt 911.02

Providing and fixing PVC printed false ceiling with

flush type with alluminium frame, frame work is done

with three different sections of G.I. sheet of 24 gauge

thickness named as C, U and L. The C section is fixed

with hangers at an equal distance of 36” each and then

U section is fixed perpendicular on C section with

steel screws at and equal distance of 16” each. The

complete frame work is supported by G.I. L angle/6

mm rod hangers from the roof and L sections is fixed

all around the wall as shown in the diagram. 5mm

PVC sheet strips of size 2 wide are fixd with counter

sunk steel screws on the U section. Further 3mm PVC

sheet is stuck to these PVC strips with solvent cement

such that joining lines are perfectly matched. P.U.

putty is filled, dried and leveled and requisite coats of

primer and paint is done on the ceiling for getting fine

surface finish etc. complete as per direction of

Engineering and charge manufacturer’s specification

150 Glass Mirror : 62.00 Each 2020.00

Providing and fixing a glass mirror size 800mm x

1500mm. with all necessary anchors, screws, and

stainless steel or brass mounting brackets fixtures and

fittings. The mirror will be made of distortion-free,

silver-backed glass with a polished edge, free of

blemishes or scratches. thickness of the glass will be

5mm. as/instruction of Architect & Engineer-in-

charge. (Size - 800 x 1500mm Overall)

151 Photo Frame : 12.00 Each 2222.00

Providing and fixing of Photo Frames/ Customized

Paintings of average size of length is 900 x 1200, with

synthetic framing wood frames, side edges with 3 mm

thick mount board(of desired colour shade), with front

cover of 4 mm thick of float glass; and backing of 5/6

thk MDF board and with necessary taping and fixing

with screws / aluminium hooks; all complete in all

respect. The images/ photographs /paintings have to

be approved by Engineer In charge as/instruction of

Architect & Engineer-in-charge. (Size - 900 x

1200mm Overall)

Schedule - B 34 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

152 Mural Art Wall Painting (3D Embossed) with 22.91 Smt 4040.00

Decorative Border :

Providing and applying 3D embossed mural art wall

painting as per approved design and concept,

including preparation of surface, base work, and

execution of artwork using approved quality acrylic

paints, textured finishes, and pigments. The mural

shall be created with artistic craftsmanship in 3D form

using materials such as POP (Plaster of Paris), wood,

or other approved suitable materials to achieve the

desired depth and texture. The artwork shall be

bordered/decorated with a neatly crafted and finished

frame made of high-quality seasoned wood, POP

molding, or other approved material as per design

intent and instructions of the Engineer-in-Charge. The

entire work shall include all materials, labour,

scaffolding, tools and tackles, surface preparation,

sealing, priming, finishing coats, and protective coats

to ensure durability and finish.

153 Dustbin : 125.00 Each 998.02

Providing and fixing an office dustbin of 20L. the

dustbin must include lid (hinged, lift-off, or pedal-

operated) to control odors, with the lid made from

matching durable material and equipped with a

smooth, rust-resistant pedal mechanism. The dustbin

will either be free-standing, with a stable base or

rubberized feet to prevent slipping. as/instruction of

Architect & Engineer-in-charge.

154 Washbasin Below Cupboard : 65.00 Each 4536.45

Providing and fixing an under-counter washbasin

below a cupboard as per the specified design and

dimensions, including all necessary materials, fittings,

and labor. The integrated cupboard will be constructed

from waterproof MDF with a water-resistant coating.

double doors or drawers with smooth-opening

mechanisms for convenient storage. The cupboard

will be finished in specify finish, laminate or wood

veneer. The installation includes cupboard using

appropriate brackets, wall anchors, and screws, with

waterproof sealing at all joints. as/instruction of

Architect & Engineer-in-charge. (Size 900 x 500 x

450(H) mm overall).

Schedule - B 35 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

155 Soft Board : 4.00 Each 2657.67

Providing and fixing on wall 12mm thick approved

quality soft board with cotton cloth/fabric of approved

make and shade on 12mm thick IS 710 ply 50 mm th

approved Glass wool sheet with PVC grip , as

approved sample and as directed by EIC. All the work

complete as per the detailed drawing , mockup sample

and instruction of Architect/EIC.

(Size 1200 x 900mm overall).

156 Pantry below storage : 1.99 Smt 4545.00

Providing, and fixing under-counter pantry storage

constructed from 19mm IS 710 BWP grade plywood,

with both sides finished in 1mm laminate of an

approved make and shade, in accordance with the

detailed drawings. All exposed edges of the plywood

will be finished with laminate to ensure a seamless

and polished appearance. The unit will include high-

quality brass satin-finish nickel-plated or SS 304-

grade hardware, such as heavy-duty hinges, locks, 6"

handles, 75mm tower bolts, and ball catches or

magnetic catches, ensuring smooth functionality and

durability. The storage system will feature shelves,

both sides laminated, with adjustable settings for

flexible storage options. A drawer unit will be

incorporated, fitted with SS 304-grade kitchen baskets

as per the selection made by the architect, ensuring

both functionality and aesthetic appeal. Additionally,

the laminate will be securely fixed and polished for a

smooth, professional finish, with attention to detail in

every aspect of installation and alignment.

as/instruction of Architect & Engineer-in-charge.

157 Visitor Chair : 6.00 Each 5863.13

Medium back chair Providing &supllying Medium

back chair (980mm x 750mm) as per selection. This

item to the satisfaction of the engineer-in charge and

consultant. complete as per instruction as directed by

site in-charge or architect.

Schedule - B 36 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

158 Toughen Glass Partition : 2.63 Smt 5555.00

Providing and fixing toughened glass with side

paneling, the glass will be made from high-quality

toughened (tempered) glass, ensuring strength, impact

resistance, and safety, with a thickness of 12mm and

clear, polished edges. The glass dimensions will be

customized to fit the space. The side paneling will be

constructed from ply with a finish of laminate or

veneer with all necessary nut, bolt, anchor & fastner.

as/instruction of Architect & Engineer-in-charge.

159 Cupboard Locker : 3.00 Each 15655.00

Providing and fixing MIECLC-001 metal locker unit,

comprising 6 compartments arranged in 2 columns

and 3 rows, fabricated from high-quality CRCA steel

of minimum 0.8 mm thickness. Each compartment

shall be provided with individual hinged doors fitted

with ventilation louvers, label holders, and secure cam

locks with keys. The locker unit shall be mounted on

welded steel legs with a minimum height of 100 mm

for ground clearance and ease of cleaning. All

external and internal surfaces shall be treated with anti-

corrosive pre-treatment and finished with a durable,

scratch-resistant, powder-coated paint in standard grey

shade. The complete unit shall be rigid, factory-

assembled or knockdown type, and installed at site

including all necessary fittings, fasteners, and supports

to ensure proper alignment and stability as per

approved drawings and site requirements as

instruction ny Enginner in Charge.

160 Photo Frame : 18.00 Each 3838.00

Providing and fixing of Photo Frames/ Customized

Paintings of average size of length is 900 x 1200, with

synthetic framing wood frames, side edges with 3 mm

thick mount board(of desired colour shade), with front

cover of 4 mm thick of float glass; and backing of 5/6

thk MDF board and with necessary taping and fixing

with screws / aluminium hooks; all complete in all

respect. The images/ photographs /paintings have to

be approved by Engineer In charge as/instruction of

Architect & Engineer-in-charge. (Size - 1200 x

Schedule - B 37 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

161 Fluted Panel + Ply Wall Panelling : 101.46 Each 6060.00

Providing & Fixing wall paneling made from 12mm

thk Marine plywood ( IS:710 ) grade with back

cladding of 8 mm ply sheet fixed level on wall with

necessary hardware & Facia / Front Cladding with

to 12 mm Thick Fluted Panel Patta of approved make

finished with groove with color & pattern With TOP

& Side Edges Covered with Teak Wood Beading Patti

as per detailed Drawings and design completed finish

as directed by EIC / Architect as per the sample

approved by the Architect.

162 Domestic Mugs - Bathroom : Natural HDPE Round 100.00 Each 25.25

Cylinder Domestic Bathroom Mug Multi 1001-1250

ml, Weight of Mug (Grams): 51-75,

163 HDPE Bucket : HDPE Bucket of Capacity 10 liter 100.00 Each 196.95

Liters, HDPE Handle Grade - 45 MA (as per IS:

7328), Mass of the Bucket 200 gm, General

Conformity to Indian Standard as per IS

164 Furniture Moulded Plastic : circle Shaped Red 11-12 100.00 Each 303.00

Inch of Height, width ;11-12 inch, Depth: 13-14 Inch.

Weight - 650 gram.

165 Double Bed Sheet : Water Proof Terry Cotton 110.00 Each 1060.50

Mattress Protector, Machine Washable, Super Soft,

Protector Feel- Soft and textured, Features- Elastic for

tucking in the corners, Material Type- Top layer -

200gsm Terry Cotton, Bottom Layer - Thermoplastic

Polyurethane (TPU film lamination), King(Double

bed) -78" x 72", Cotton,1.98m x 1.83m, Product color

and texture may as per Approved By engineer

166 Single Bed Sheet : Water Proof Terry Cotton Mattress 104.00 Each 747.40

Protector, Machine Washable, Super Soft, Protector

Feel- Soft and textured, Features- Elastic for tucking

in the corners, Material Type- Top layer - 200gsm

Terry Cotton, Bottom Layer - Thermoplastic

Polyurethane (TPU film lamination), Single bed - 72"

x 36", Cotton, 1.83m x 91.4cm, Product color and

texture may as per Approved By engineer incharge.

167 Double Bed Blankets : All Season Double (90 x 82 70.00 Each 1646.30

Inch), 110 GSM, 100% Cotton,| Reversible Design,

AC Blanket: Fabric Feel - Super-soft printed fabric,

made with 100% cotton, Filling- 110gsm cotton

flannel filling, Product Dimensions-L 2.28 m x W

2.08m (90 x 82 Inch), Weight-1380g, Product color

and texture may as per Approved By engineer

Schedule - B 38 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

168 Single Bed Blankets : All Season Single(90 x 56 67.00 Each 1060.50

Inch), 110 GSM, 100% Cotton,| Reversible Design,

AC Blanket: Fabric Feel - Super-soft printed fabric,

made with 100% cotton, Filling- 110gsm cotton

flannel filling, Product Dimensions-L 2.28 m x W

1.42m (90 x 56 inches), Weight-930g, Product color

and texture may as per Approved By engineer

169 Providing and fixing Lock Organiser of overall size 2.00 Each 5050.00

600mm (Width) x 1200mm (Height), fabricated from

premium quality plywood. The external surfaces shall

be finished with 0.8mm thick outdoor-grade laminate

to provide durability and aesthetic appeal. The internal

surfaces shall be finished with natural veneer for an

elegant interior look. The organiser shall be fitted with

a heavy-duty locking shutter system, complete with a

key-operated lock mechanism, ensuring secure and

smooth operation. All edges shall be machine-pressed

and sealed to prevent moisture ingress and to ensure

long-term durability. The unit shall be provided and

fixed firmly at site using necessary brackets, fasteners,

screws, and adhesives, complete in all respects,

finished properly, and handed over to the satisfaction

of the Engineer-in-Charge.

170 Supply, Installation, Testing, and Commissioning 4.00 Each 19258.48

(SITC) of Stainless Steel Dining Table with fixed

Chairs/Benches for six (6) persons. Table top,

chair/bench seat, legs, and support structure fabricated

from Stainless Steel Grade 304, galvanized, with a

material thickness of 1.0 mm. Table design:

Rectangular; Chair/Bench design: Round. Table top

and chair/bench seat edges to be double folded after

cutting. Table fitted with four (4) legs (25 mm

diameter) and three (3) widthwise supports (25 mm x

25 mm). Chair/bench with single pole legs (25 mm x

25 mm) and one (1) widthwise support (25 mm x

mm). Dimensions: Table width 1800 mm (±10 mm),

depth 915 mm (±10 mm), height 750 mm (±10 mm).

Chair/bench seat width and depth 300 mm (±10 mm),

seat height 500 mm (±5 mm), overall height including

backrest 500 mm (±10 mm). Footrests provided on

two sides along width for both table and chair/bench.

Surface finish to be free from cracks and distortions.

Schedule - B 39 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

171 Supply, installation, testing, and commissioning of 32- 8.00 Nos 15321.18

inch Smart LED Television with HD resolution

(1280x720 pixels), LED display technology, Android

operating system, minimum brightness of 280 nits,

static contrast ratio of 1900:1, and audio output of

10W x 2 inbuilt speakers. The TV shall support

minimum 96 RF channels, include smart features such

as HDR, screen mirroring, built-in Wi-Fi, Wi-Fi

Direct, and Bluetooth. It shall have 1 HDMI port,

USB port, RF input, composite input, and an Ethernet

port, with accessories including remote control, wall

mounting bracket, and stand. The power supply shall

be 230V ±10%, 50Hz with a maximum power

consumption of 55W and standby consumption of

172 Supply, installation, testing, and commissioning of 8.00 Nos 12120.00

compact mini refrigerator with a gross capacity of

to 60 liters. The refrigerator shall be single-door type,

energy-efficient with a minimum 3-star BEE rating,

and operate on 230V, 50Hz AC power supply. It shall

include direct cool technology, a mechanical

temperature control knob, removable shelves, door

racks for bottles, and a compact freezer compartment.

The unit must be CFC-free, operate silently with low

power consumption, and conform to IS:1476

standards with BIS certification. Supplied complete

with power cord, user manual, and standard

accessories, and shall be backed by a comprehensive 1-

year onsite warranty including installation and

173 SWING: 2.00 Each 28280.00

Providing, supplying, and installing an outdoor 2-

seater swing without roof, having a seat with

integrated backrest made of 5 mm thick Fibre

Reinforced Plastic (FRP) in red colour, supported on

both sides by 25 NB medium class corrosion-resistant

GI pipes conforming to IS 1239 (Part 1)/latest. The

total width of the swing is 1870 mm with a seat width

of 1400 mm, seat height from ground 450 mm, leg

pipe length 2950 mm, and distance between leg pipes

2310 mm. The swing is suspended using stainless

steel chains with a wire diameter of 4.7 mm, chain

length 1250 mm at the backrest and 1600 mm at the

seat. It has a weight-bearing capacity of 136 kg,

suitable for two persons. All pipes used are corrosion

Schedule - B 40 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

174 SLIDE: 1.00 Each 20200.00

Providing, supplying, and installing an outdoor slide

suitable for children aged 6 to 12 years, fabricated

with a high-strength, UV-stabilized, and weather-

resistant Fibre Reinforced Plastic (FRP) sliding chute

with a smooth finish to ensure safety and comfort

during use. The slide chute shall be minimum

meters in length with a width not less than 500 mm,

and thickness of FRP not less than 4 mm. The

supporting frame shall be made of 40 NB medium

class GI pipe conforming to IS 1239 (Part 1)/latest,

treated for corrosion resistance with powder-coated

finish in colours as per buyer’s choice. The slide shall

be mounted at a safe platform height of approximately

1800 mm with anti-skid steps made of FRP or MS

with proper grip, and side safety handrails. The base

structure shall be secured firmly in concrete

foundation blocks as per manufacturer’s design for

structural stability. The equipment shall have a weight-

bearing capacity suitable for multiple users, and must

be free of sharp edges and toxic materials.

175 SPRING BIKE RIDER: 3.00 Each 20200.00

Supply and installation of an outdoor spring bike rider

suitable for children aged 3 to 6 years, manufactured

using a rotational moulding process with seamless

finishing for uniform thickness and durability. The

rider is made of UV-stabilized, food-grade LLDPE

(Linear Low-Density Polyethylene), RoHS compliant

and non-hazardous, with a wall thickness of 6 mm.

The spring assembly consists of a top plate, EN

heavy-duty spring, footrest, and square base plate

fixed using galvanized U bolts. The structure includes

handles and footrests, with all metallic components

made of hot-dip galvanized 40 NB pipes and MS

plates conforming to IS 1239 (Part 1), with a GI

thickness up to 60 microns and safety PVC caps on

open ends. Dimensions of the rider are 1030 mm (L) x

240 mm (W) x 910 mm (H) with a foundation

concrete block of 460 x 460 x 460 mm. All metal

components are powder-coated with pure polyester,

maintaining a dry film thickness of 50–70 microns and

high color stability; spring is Komaxit coated. Product

is surface mounted using concrete bolts, packed with

gutta material, and offered with 1-year warranty.

Schedule - B 41 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

176 PLATFORM MERRY GO ROUND: 1.00 Each 34190.52

Supply and installation of Playground Merry-Go-

Round – Platform Type, The equipment shall

comprise a circular rotating platform with an overall

diameter ranging from 2.6 m to 3.0 m, fabricated using

3 mm thick MS (mild steel) sheet with anti-skid

surface treatment. The platform shall be supported by

a heavy-duty central axis and precision-engineered

ball or roller bearings enclosed in a weather-sealed

housing to ensure smooth and maintenance-free 360-

degree rotation. The unit shall be designed to

accommodate up to 6 children simultaneously, with a

minimum total load-bearing capacity of 250 kg.

Platform height from finished ground level shall be

between 0.5 m and 0.8 m. The structure shall include

ergonomically designed tubular MS handrails

(minimum 25 mm diameter and 2 mm thickness)

around the perimeter, securely welded or bolted to the

platform for user safety. The base frame shall be

fabricated from heavy-duty structural steel members,

hot-dip galvanized or powder coated for corrosion

resistance. All fasteners shall be stainless steel or hot-

dip galvanized to withstand outdoor weather

conditions. The entire unit shall be finished in vibrant,

UV-resistant, child-safe, lead-free paint, with design

and color scheme as per the approved by Engineer in

177 Providing and fixing Red/Pink sand stone ( Bansi 96.74 Smt. 8585.00

paharpur ) post (Mataga) having size 100x100mm

heights 600 to 750 mm of even shade as per

ornamental design such as like flower octagonal head

border etc. to fixed with white cement/epoxy mortar

and Stone jali 40mm thick Red/Pink sand stone as per

engraving up to the depth of 10 mm ornamental design

with cut out as per drawings to fixed with white

cement/epoxy mortar including pointing in white

cement mortar 1:2 (1 white cement : 2 stone dust) with

an admixture of pigment and filling the engraved

depth with approved shade colour as according to the

design and matching the stone shade and clear coat of

silicon sealant paint of 60 micron thickness.

Schedule - B 42 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

178 Providing and fixing Red/Pink sand stone ( Bansi 16.39 Smt. 8585.00

paharpur ) post (Mataga) having size 100x100mm

heights 600 to 750 mm of even shade as per

ornamental design such as like flower octagonal head

border etc. to fixed with white cement/epoxy mortar

and Stone jali 40mm thick Red/Pink sand stone as per

engraving up to the depth of 10 mm ornamental design

with cut out as per drawings to fixed with white

cement/epoxy mortar including pointing in white

cement mortar 1:2 (1 white cement : 2 stone dust) with

an admixture of pigment and filling the engraved

depth with approved shade colour as according to the

design and matching the stone shade and clear coat of

silicon sealant paint of 60 micron thickness.

179 Stone work (machine cut edges) for Wall cladding/ 7.48 Smt. 8585.00

Veneering work up to 15 m height with 20 to 30 mm

thick Pink Sand stone (Bansi Paharpur) and backing

filled with a grout of 12mm thick cement mortar 1:3 (1

cement : 3 coarse sand) and engraving designs as

according to the drawings with an admixture of

pigment and filling the engraved depth with approved

shade colour including pointing in white cement

mortar 1:2 (1 white cement : 2 stone dust) with clear

coat of silicon sealant paint of 60 micron thickness an

admixture of pigment matching the stone shade and to

be secured to the backing by means of cramps and

edge rendering / moulding as according to the

180 Stone work (machine cut edges) for Wall cladding/ 38.43 Smt. 8585.00

Veneering work up to 15 m height with 20 to 30 mm

thick Pink Sand stone (Bansi Paharpur) and backing

filled with a grout of 12mm thick cement mortar 1:3 (1

cement : 3 coarse sand) and engraving designs as

according to the drawings with an admixture of

pigment and filling the engraved depth with approved

shade colour including pointing in white cement

mortar 1:2 (1 white cement : 2 stone dust) with clear

coat of silicon sealant paint of 60 micron thickness an

admixture of pigment matching the stone shade and to

be secured to the backing by means of cramps and

edge rendering / moulding as according to the

Schedule - B 43 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

181 Providing and fixing Red/Pink sand stone ( Bansi 75.94 Smt. 8585.00

paharpur ) post (Mataga) having size 100x100mm

heights 600 to 750 mm of even shade as per

ornamental design such as like flower octagonal head

border etc. to fixed with white cement/epoxy mortar

and Stone jali 40mm thick Red/Pink sand stone as per

engraving up to the depth of 10 mm ornamental design

with cut out as per drawings to fixed with white

cement/epoxy mortar including pointing in white

cement mortar 1:2 (1 white cement : 2 stone dust) with

an admixture of pigment and filling the engraved

depth with approved shade colour as according to the

design and matching the stone shade and clear coat of

silicon sealant paint of 60 micron thickness. SOR

182 Providing and fixing stone canopy of size 1.15 X 1.15 8.00 Nos 95950.00

x 2.15 on the base of 1.1 X 1.1 of height 1 mt with

engraving of floral pattern in all directions as shown

in drawing with having top 1 mt with all the moulded

edges, 4 nos of columns of dimension 100 mm X

Mm with arch connection and rounded canopy with

dasa / with ornamental shape canopy and 30mm red

sand stone sun-shade (chisel-dressed) supported on

red sand stone brackets with "PAN Shape" engraving

as per required pattern with engraving depth of 5 mm

(average) in single piece including pointing with

admixture of pigment and clear coat of silicon sealant

paint of 60 micron thickness matching with the stone

shade as shown in drawing

183 Stone work (machine cut edges) for Wall cladding/ 278.57 Smt. 3838.00

Veneering work up to 15 m height with 20 to 30 mm

thick Pink Sand stone (Bansi Paharpur) and backing

filled with a grout of 12mm thick cement mortar 1:3 (1

cement : 3 coarse sand) and engraving designs as

according to the drawings with an admixture of

pigment and filling the engraved depth with approved

shade colour including pointing in white cement

mortar 1:2 (1 white cement : 2 stone dust) with clear

coat of silicon sealant paint of 60 micron thickness an

admixture of pigment matching the stone shade and to

be secured to the backing by means of cramps and

edge rendering / moulding as according to the

Schedule - B 44 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

184 Providing and fixing red sand stone brackets 38 to 43 68.00 Nos 4848.00

x 10 x 32 cm sunk and moulded including providing

and fixing with 4 Nos. gun metal cramp 25x6mm

cm long and dowel bars 7.5 cm long 6 mm dia as per

185 Providing and fixing Stone Jharokha on wall for 9.24 Nos 44541.00

elevation, crafted from Red/Pink sandstone (Bansi

Paharpur or equivalent), matching in shade and

quality. The Jharokha shall be carved as per approved

ornamental designs including floral motifs, arches,

columns, and detailed borders, as per architectural

drawings. All carving shall be up to a depth of 10mm

minimum with precision workmanship. Stone

thickness shall be 40mm minimum for panels, with

additional thickness for carved elements as required.

The Jharokha shall be fixed securely with white

cement/epoxy mortar, including necessary anchoring

supports. The joints shall be properly pointed using

white cement mortar (1 part white cement: 2 parts

stone dust) with pigment admixture matching the

stone shade, and all engraved portions shall be filled

with colour-matched pigment. A protective clear coat

of silicon-based sealant (minimum 60-micron

thickness) shall be applied to the entire exposed

surface to prevent weathering and enhance durability.

The work shall be completed as per the drawing,

specifications, and to the satisfaction of the Engineer-

Schedule - B 45 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

186 Providing and fixing Red/Pink Sandstone (Bansi 2.59 Cmt 30287.88

Paharpur or equivalent) cornice piece over compound

wall top, carved and shaped as per approved

ornamental design and architectural drawings. The

cornice shall be of uniform section, with carved

profiles ogee shapes, chamfers, and mouldings as

detailed, with a minimum carving depth of 10mm. The

stone used shall be of even shade, free from cracks

and defects. The cornice shall have a minimum

thickness of 40mm or more as required by design,

properly machine cut and hand-finished. Fixing shall

be done using white cement/epoxy mortar, with full

bedding and proper jointing. All joints shall be

pointed neatly with white cement mortar 1:2 (1 white

cement : 2 stone dust) admixed with approved pigment

matching the stone colour. After installation, a silicon-

based clear sealant coat of minimum 60-micron

thickness shall be applied to protect the surface from

weathering and stains. The work shall be completed

accurately to line and level, as per detailed drawings

and instructions of Engineer-in-Charge. Dasa / coping

/ lintel carved linear pieces.

187 Providing and fixing Red/Pink Sandstone (Bansi 9.24 Cmt 30287.88

Paharpur or equivalent) ornamental arch, carved as per

approved architectural design and detailed drawings.

The arch shall be constructed using precision-cut

stone pieces with ornamental carving including

keystone detailing, with a minimum carving depth of

10mm. The sandstone shall be of uniform shade, free

from defects, properly seasoned, and dressed to

required profiles. Stone thickness shall be minimum

40mm to ensure stability and detailing. All arch

components shall be fixed with white cement/epoxy

mortar, ensuring perfect alignment, curvature, and

joint tightness. Pointing of joints shall be done with

white cement mortar 1:2 (1 white cement : 2 stone

dust) mixed with pigment matching the stone colour.

Engraved and exposed surfaces shall be finished with

a clear silicon-based sealant coat of minimum 60-

micron thickness for protection against weathering.

Work shall be executed true to line, level, and radius

as per approved design and to the satisfaction of the

Engineer-in-Charge. For curved arch as according to

Schedule - B 46 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

188 Supplying and stacking at site dump manure from 44.42 Cmt 293.61

approved source, including carriage upto 5 km

complete (manure measured in stacks will be reduced

by 8% for payment) : (II)Screened through sieve of

I.S. designation 16 mm

189 Fine dressing of the ground. 493.49 Smt 3.74

190 Spreading of sludge, dump manure and/or good earth 44.42 Cmt 52.87

in required thickness as per direction of officer-in-

charge (cost of sludge, dump manure and/ or good

earth to be paid separately)

191 Mixing earth and sludge or manure in the required 44.42 Cmt 36.92

proportion specified or directed by the Officer-in-

192 Grassing with selection No. 1 grass including 493.49 Smt 15.15

watering and maintenance of the lawn for 60 days or

more till the grass forms a thick lawn, free from weeds

and fit for mowing including supplying good earth, if

193 Providing, stacking and planting of Shrubs of height 493.49 Smt 555.50

50-120 cm including making pit and other require

work realted to Planting, well branched, bushy in big

size HDPE bag as per direction of the officer-in

charge.(Tabebuia rosea,,alphimia glauca, Bauhinia

tomentosa pennisetum setaceum, pennisetum

setaceum, Allamanda cathartica, Ipomoea palmata,

Parijat, Tulsi, Cestrum diurnum - day jasmin.

194 Providing, stacking and planting of Different Types of 59.00 Nos 606.00

Trees of height 150 - 175 cm including making Pit

Size 600mm x 600mm x 900mm, Filling earth manure,

Planting, watring etc as per direction of engineer in

195 Providing upto floor two level precast cement 25.03 Smt 712.18

concrete jali or grill 1:2:4 mix (1- Cement : 2- coarse

sand : 4-graded stone aggregate 6mm nominal size)

reinforced with 1.6 mm dia. Mild steel wire including

roughening,cleaning, fixing and finishing in cement

mortar 1:3 and curing complete. (B) 40mm thick

196 providing and fixing special formwork for moulding / 185.00 Smt 313.10

edge / cronices as according to drawings at all level

and height a only front and molded edge shall be

Schedule - B 47 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

197 Point wiring for Light / Bell with 2-1.5 sq.mm & 738.00 Pts. 485.81

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type

of pipe erected with 6A Modular type switch / bell

push & accessories and earth continuity of following

type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete cat lll

198 Point wiring for FAN with 2-1.5 sq.mm & earth wire 126.00 Pts. 674.68

of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete CATlll

199 Point wiring for on board Looped Plug with 6A 433.00 Pts. 257.55

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories cat lll

200 Providing following type of Modular Type 20.00 Ea 25.25

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules erected

with necessary connections as per site situation

directed by Engineer In charge.

(7) Blank Plate Single Cat.III

Schedule - B 48 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

201 Providing following type of Modular Type 18.00 Ea 160.59

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules erected

with necessary connections as per site situation

directed by Engineer In charge.

(4) TV Co-axial Socket outlet CAT lll

202 Providing following type of Modular Type 5.00 Ea 160.59

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules erected

with necessary connections as per site situation

directed by Engineer In charge.

(8) Computer RJ-45 socket cat lll

203 Providing following type of Modular Type 131.00 Ea 180.79

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules erected

with necessary connections as per site situation

directed by Engineer In charge.

(9) 16 Amp. SP one way switch Cat.III

204 Providing following type of Modular Type 131.00 Ea 199.98

Accessories mounted with PVC / metallic/Wooden

box, single mounting base frame covered with

textured / metallic/white front plate , modules erected

with necessary connections as per site situation

directed by Engineer In charge.

(10) 6/16Amp. Universal socket Cat.III

205 Providing and erecting ISI mark Medium class RIGID 144.00 Mtr. 24.24

PVC PIPES of following size complete to be erected

on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution

& Clamps with following dia of pipes, in approved

manner as directed

Schedule - B 49 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

206 Providing and erecting Mains with 1.1 KV grade 3856.00 Mtr. 82.82

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm

copper conductor FRLS PVC insulated stranded wire

of green colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and

(b) 2 wire 2.5 sq. mm

207 providing and erecting Mains with 1.1 KV grade 3320.00 Mtr. 112.11

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

in / on wall / ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour

for earth continuity of following size Cat.III

(A) with medium class Rigid PVC pipe and

(a) 2 wire 4 sq. mm

208 providing and erecting Mains with 1.1 KV grade 750.00 Mtr. 260.58

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected

in / on wall / ceiling with 2.5 sq. mm copper conductor

FRLS PVC insulated stranded wire of green colour

for earth continuity of following size Cat.III

(A) with medium class Rigid PVC pipe and

(h) 4 wire 6 sq. mm

209 providing and erecting Mains with ISI marked, 1.5KV 24.00 Mtr. 17.17

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

(b) One wire 1.50 sq. mm

210 providing and erecting Mains with ISI marked, 1.5KV 276.00 Mtr. 91.91

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

(f) One wire 10.00 sq. mm

Schedule - B 50 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

211 providing and erecting Mains with ISI marked, 1.5KV 20.00 Mtr. 236.34

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

(h) One wire 25.00 sq. mm

212 providing and erecting Mains with ISI marked, 1.5KV 4.00 Mtr 300.98

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

(i) One wire 35.00 sq. mm

213 providing and erecting Mains with ISI marked, 1.5KV 4.00 Mtr 1178.67

grade electrolyte multi stranded, annealed copper

conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring)

with required size of copper lugs, nuts and bolts if

(m) One wire 120.00 sq. mm

214 Supplying and erecting Flexible PVC insulated multi 28.00 Mtr. 46.46

strand multi core 1.1 kv grade ISI marked copper

wires of following size to be erected as directed.

e) 1.50 Sq.mm 3 core round PVC sheathed

215 Providing & Erecting approved make following size 180.00 Mtr 62.62

of TV Co-axial flexible cable comprising inner

conductor of solid bare copper insulated with Foam

PE & Secondary conductor made of poly - Aluminium

film bonded Al. Braids @ suitable coverage overall

sheathed with black PVC insulation. (e) RG-11

Schedule - B 51 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

216 Providing & erecting Switch board for Computer or 5.00 Ea 1133.22

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type

Accessories cat lll

217 Decorative call bell Ting-tong box type 250 volts 56.00 Nos. 71.71

complete erected

218 Supplying and erecting LED indoor fittings with 54.00 Nos. 535.30

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and

high U.V. & corrosion resistance with diffuser with

company mark/name 160V to 270V, Power Factor

more than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED LED

driver efficiency > 85 % ( fitting required LM-79 &

LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Tube Light with

integral driver(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet CAT lll

219 Supplying and erecting led lamps with following 77.00 Nos. 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >=

(A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (A) LED Lamps integral

type, with PC diffuser suitable LAMP holder (ii)

to 8 watts cat lll

Schedule - B 52 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

220 Supplying and erecting LED indoor fittings with 478.00 Ea 758.51

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name 160V to 270V,Power Factor

more than 0.95, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt , LED

driver efficiency > 85 % ( fitting required LM-79 &

LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips

complete.IP20 (iv) 22-24 watts, Surge-2 KV cat lll

221 Supplying and erecting LED street light / Flood light 8.00 Ea 4997.48

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection. (ii) above 48 to

Schedule - B 53 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

222 Supplying and erecting LED street light / Flood light 6.00 Ea 10818.11

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection (vii) above 200 to

223 Pproviding and erecting Approved make Four pole 5.00 Ea 6173.12

moulded case circuit breaker having breaking capacity

ICU of 25 KA. at 415 V,having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic

release suitable to work on A.C. supply 50 c/s. with all

internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

224 Providing and erecting Approved make Four pole 1.00 Ea 8055.76

moulded case circuit breaker having breaking capacity

ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable

to work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

225 Providing and erecting Approved make Four pole 7.00 Ea 20946.39

moulded case circuit breaker having breaking capacity

ICU of 35 KA. and above at 415 V . having normal

current rating 250A. with variable thermal &

magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat

Schedule - B 54 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

226 Providing and erecting Approved make Four pole 2.00 Ea 25228.79

moulded case circuit breaker having breaking capacity

ICU of 50 KA and above at 415 V having Normal

current rating 400A. with variable Thermal &

magnetic release suitable to work on A.C.supply

c/s. With all internal connections, spreader tinned

copper & complete erected in existing 16 G.M.S.

227 Supplying & erecting approved make Four Pole 415V 1.00 Ea 22255.35

change over switch interior for panel mounting with

operating mechanism A.C.23 duty confirming to IS

for (F)400A cat lll

228 Supplying and erecting triple pole & neutral 440V / 2.40 Rn.Mtr 4909.61

500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not

more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape

for phase sequence of following current carrying

capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(C) Suitable for 300 Amp. capacity

229 Supplying and erecting triple pole & neutral 440V / 1.20 Rn.Mtr 7319.47

500V panel mounting Copper Busbars with four equal

Nos. of electrolyte bus having current density not

more than 1.6 Amp. / sq.mm (Rated current / cross

section area) duly wrapped with colour insulating tape

for phase sequence of following current carrying

capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(D) Suitable for 400 Amp. capacity

230 providing and erecting Miniature circuit breaker single 14.00 Ea 270.68

pole 0.5A to 2A system and having breaking capacity

10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark cat lll

231 providing and erecting Miniature circuit breaker single 270.00 Ea 112.11

pole 6A to 25A suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be

erected in existing box. confirming to IS 8828/1996

with ISI Mark cat lll

Schedule - B 55 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

232 Providing & erecting 240 V MCB double pole switch 90.00 Ea 330.27

for motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing

box having following capacity (B) 40 Amp.

233 Providing & erecting 415 V MCB Four Pole for 33.00 Ea 737.30

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in existing

box having following capacity (c)63 Amp.

234 Providing and erecting Sheet Steel powder coated 15.00 Ea 3412.79

MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without

MCB to house appropriate nos. of MCBs.(The DBs

should be used of same company of MCB to be used)

(B) three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI) (b) sheet

steel double door(iii)8 way

235 providing and erecting Approved make RCCBs 49.00 Ea 2235.13

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on single phase

V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating

erected as directed (ii) 40Amps. DP cat lll

236 Providing and erecting Approved make RCCBs 4.00 Ea 2637.11

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA

and suitable for operation on 3 phase and neutral

415V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate

any electronic component for following Max. rating

erected as directed. (ii) 40Amps. FP cat lll

237 Providing and erecting HOT deep Galvanised iron 12.00 Kg. 77.77

strip wire 8 to 16 SWG.

Schedule - B 56 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

238 Supplying & erecting in earthpit of minimum bore 4.00 Ea 5842.85

dia. 225mm size approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per

IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80 mm having 80-

200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection

terminal dia of 14 mm with constant ohmic value

surrounded by highly conductive compound with high

charge dissipation suitable for following type of

applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test

certificate including value of earth resistance of

installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing

resistane mentioned in test Certificate) & having back

filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as

per IEC 62561-2017, Voltage drop:- < 1 volt at no

load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable

to retain moisture for long time Necessary test report

must be submitted by Agency.

[A] For electrical installation up to 440 V Length of

Pipe - 1 MtrBack filling compound - 1 Nos. of Bag of

Schedule - B 57 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

239 Providing & erecting weather proof, dust & vermin 6.50 sq. mtr 10468.65

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge

made from 14 SWG thick CRC M.S. sheet for outer

body & doors, 16 SWG thick CRC M.S.sheet for

internal partitions with necessary accesories

supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal

partitions & cable alley as per requirements &

instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, suitable size of

inter connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus &

earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates

excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied

with following approved manufacturers with

following size. (A) locally fabricated panel board (i)

with 350 mm depth

240 Providing , erecting , fabricating the M.S. structure as 50.00 Kgs. 77.77

per requirement on site incorporating proper size of

M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding &

finishing duly painted with one coat of red oxide with

erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering &

finishing complete.

241 Providing and erecting XLPE(IS:7098)(I)-88 ISI 170.00 Mtr 540.35

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core)

Schedule - B 58 of

It. Description of Item Rate in

(with brief specification and reference to Detail Quantity Unit Amount

No specifications)

242 Providing and erecting XLPE(IS:7098)(I)-88 ISI 100.00 Mtr 1168.57

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or

in existing trench / pipe of following size of cables

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

243 Providing and erecting XLPE (IS:7098)(I)-88 ISI 300.00 Mtr 126.25

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

(B) 4 core 6 Sq. mm

244 Providing and erecting XLPE (IS:7098)(I)-88 ISI 60.00 Mtr 140.39

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables

(C) 4 core 10 Sq. mm

245 Making trench in soft soil of suitable width of 90 cm 270.00 Mtr. 55.55

deep for laying cable or locating the fault all over the

run and back filling the same and making the surface

as normal ground.

246 Making trench in Hard Murrum / Tar Road of suitable 10.00 Mtr. 74.74

width of 90 cm or required depth for laying any size

of cable or locating the fault all over the run and back

filling the same and making the surface as normal

247 Providing & laying. R.C.C. Hume pipe for cable to be 260.00 Mtr. 295.93

laid 90 cm. below ground across the road crossing or

on floor with necessary material in an approved

manner and making the ground as per original.

248 Providing & laying approved make ISI marked 72.00 Mtr. 108.07

HDPE 6Kg / cm2 (Class-3) as per IS:4984:1995 PE-

80 to be erected at road crossing on or floor as

directed for laying of cable. The pipes as following

size of dia & weight per 6 mtr.

(A) 40 mm inner Dia.

249 Providing and, fixing heavy duty flange type brass 28.00 Ea 38.38

cable gland with rubber ring for PVC insulated

armoured cable complete with out going tails,

insulating tape etc for following size of cables.

(b) 2 to 4 core 6 Sq. mm