REPAIR AND MAINT SEWAGE LINE SOAKAGE WELLS AND EXTERNAL FINISHES IN SOMNATH STADIUM UNDER AGE B R I AREA AT IMA DEHRADUN

Amount

Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:4) complete all as specified and directed.

M & L Brick work using sub class “B” bricks (except brick) straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 ( Old size brick) complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 12mm thick ready mix external plastering on brick or concrete surfaces mixed with water as per manufacturer's specifications including providing & mixing water proofing compound as per manufacturer's specifications, surface finished even & smooth, complete all as specified and directed. Make Ultertech(Raedyplast)/ ACC (Accoplast)/ Birla(Aerocon).

M&L PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in foundation of man hole incl demolition of existing cement concrete of any description complete all as specified and directed.

M&L for PCC 1:2:4 Type B-0 using 12.5mm graded crushed stone aggregate} as in coping/benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work incl demolition of existing cement concrete of any description complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains including demolition and taking out of existing cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel 30 Cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Cutting into exisiting manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching and forming channels and reforming benching etc complete in PCC 1:2:4 type B1 smooth finish complete 150mm dia & up to 300 mm dia complete all as specified and directed.

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed.

S&F PVC branch pieces single ordinary or inverted or with parallel branches 110mm dia fitted with oval access doors fixed in repair complete all as specified and directed.

S&F PVC branch pieces single ordinary or inverted or with parallel branches 75 mm dia fitted with oval access doors fixed in repair complete all as specified and directed.

S&F PVC bends fitted with oval access doors 75 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

S&F PVC bends fitted with oval access doors 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as directed.

Excavation in trenches not exc 1.5m wide and exc 1.5m and not exc 3.0 m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25cement mortar complete all as specified and directed.

Removal of surplus soil to distance exceeding 250 metre but n. exc. 500 metre and depositing as directed at a level n. exc. 1.50m above the starting point complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc and including demolition of existing old cement concrete complete all as specified and directed.

M&L for 25mm thick glossy finish pre-polished red color Chequered precast cement concrete tile 300mm x 300 mm of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula.

M&L for Construction of soakage well of size 1.20 M dia X 3.0 M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 concrete, including brick work in cement mortar 1:4, plaster where shown on drg shall be 15mm thick in cement mortar 1:6, bearing plaster 15mm thick in cement mortar 1:4, RCC cover slab In M-25, filling with brick bats of gauge 80 to 150mm including Demolition of existing old soakage well complete all as specified and shown in Drg TD-309 sheet 1/4 to 4/4.

M&L for Construction of soakage well of size 1.8 M dia X 3.0 M deep, excavation in any type of soil, foundation in PCC 1:3:6 type C-2, walls of honey combed and solid in M-25 concrete, including , brick work in cement mortar 1:4, plaster where shown on drg shall be 15mm thick in cement mortar 1:6, bearing plaster 15mm thick in cement mortar 1:4, RCC cover slab In M-25, filling with brick bats of gauge 80 to 150mm including Demolition of existing old soakage well complete all as specified and shown in Drg TD-309 sheet 1/4 to 4/4.

M&L for DWC(Double wall coruggated) HDPE pipes of size 100mm internal dia confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed.

M&L for DWC(Double wall coruggated) HDPE pipes of size 150mm internal dia confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed.

M&L for DWC(Double wall coruggated) HDPE pipes of size 200mm internal dia confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed.

S&F Factory made Medium duty precast RCC Manhole frame with 2 cover confirming to IS 12592 (Part -1 & II ) having clear opening 600mm x 600 mm x 100mm of M-30 Grade of concrete and suitably reinforced with strong vibrating compaction by vibratory table complete all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula.

S&F Factory made Medium duty precast RCC Manhole frame with cover confirming to IS 12592 (Part -1 & II ) having clear opening 450mm x 450 mm x 70mm of M-30 Grade of concrete and suitably reinforced with strong vibrating compaction by vibratory table complete all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula.

S&F Factory made Precast plain / perforated RCC Drain/ manhole cover size (900x 450 x 50 mm of M-30 grade of concrete reinforced with 8 mm dia TMT bar of Fe- 500 grade at 150 mm c/c spacing both way with strong vibrating compaction by vibratory table complete all as specified and directed. Make:- Tulip infrastructure saharanpur, Mehtab tiles, NTC tiles Panchkula.

Shifting / relocate existing manhole cover to distance exceeding 250 metre but n. exc. 500 metre complete all as specified and directed.

Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing , monkey proofing guard for water tank and similar work complete all as directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position, complete all as directed.

S&F Pre-painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as directed including dismantling existing AC sheets.

S&F Pre-painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheets.

S& F Steel work in hollow section and tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including dismantling existing timber scantling complete all as specified and directed.

S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of form work to edges of concrete flat slab and shelves,not exceeding 20cement mortar Thick for fair finish surface complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed.

RCC (design mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like including demolition of existing R.C.C complete all as specified and directed.

S&F in repairs vitreous china table top wash basin Snow white colour size 550 x 400 x 160mm including waste coupling complete all as specified & directed. Make: Cera Cat. No.S2020101 or equivalent of make Hindware/ Parryware.

S&F Chromium plated Angle valve 15mm dia (angle cock) cast fixed in repair complete all as directed. Make:-Jaquar Essco (Orbit series), Cera(Victor series),Prayag (7000 series Salasa).

S&F 15 mm dia pillar cock Super Delux with Aerator fixed in repair complete all as directed. Make:-Jaquar Essco (Orbit series), Cera(Victor series),Prayag (7000 series Salasa).

S& F Granite stone ( Z Black) 20 to 25 mm thick machine cut (table rubbed & polished), as in floors, cooking platforms and like over and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl fixing adhesive complete all as directed.

Cutting chases, pinning in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit and fixing of granite stone, etc and making good exceed 20 cement mortar girth in brick walls complete all as directed.

Providing edge moulding to 20-25mm thick Granite stone any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete.

S&F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F 18mm thick prelaminated colour WPC Board having base brown, minimum density of 600 kg/cum, for kitchen cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed.

S&F Chromium plated Angle valve 15mm dia (angle cock) cast fixed in repair complete all as directed. Make:-Jaquar Essco (Orbit series), Cera(Victor series),Prayag (7000 series Salasa).

S&F 15mm dia pillar cock Super Delux with Aerator fixed in repair complete all as directed. Make:-Jaquar Essco (Orbit series), Cera(Victor series),Prayag (7000 series Salasa).

S&F PVC conections 15mm size with brass nuts of 600 mm long fixed in repair complete all as specified and directed.

S&F Low density polyethylene (LDPE) 32mm dia pipes of pressure rating 6 kgf/sq. cement mortar

Supply and fixed in repairs CP grating 125 mm dia complete all as specified and directed.

M&L for complete removal of existing treatment of walls/ ceiling by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc, by skilled labour complete all as directed. Note:- Work shall be carried out upto 15 to 17 mtr height t and quated rates deemed to be inclusive of cost of scafolding, safety measure etc all as required.

M&L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for two coat of water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note for Item No 59 to 61 above (a.) The work shall be executed from authorized applicator only through manufacturer of which the materials i.e. Putty,Primer and exterior emulsion etc. is proposed to be used by the contractor and as approved by Garrison Engineer. (b.) The contractor shall submit ‘Memorandum of Understanding’ (MOU) on manufacturer'S ORIGINAL Letter Head with only one manufacturer mentioned in the contract and submit for approval before execution of work .(c) Work shall be carried out up to 15 to 17 mtr height and quated rates deemed to be inclusive of cost of scafolding, safety measure etc all as required. (d)Five years manufacturer's guarantee shall be given by the contractor and 2.5 % Guarranty money shall be submitted in form of FDR for 05 years. Make :- Asian Paint/Berger paint/Dulex weather shield.

M&L for preparation of old coloured/ painted concrete surfaces/ tiles, paver block, floor tiles etc of any description, cleaning with wire brushes, removing all dust & dirt from surfaces, washing with water and applying two coats of tile/floor paint of approved make and colour, complete all as specified and directed. Note:- Work shall be carried out upto 15 to 17 mtr height and quated rates deemed to be inclusive of cost of scafolding, safety measure etc all as required. Make :- Asian Paint/Berger paint/Dulex.

M&L for preparation of old painted steel surfaces of any description, over 10 cement mortar in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directe. Note :- Painting shall be carried out on training infrastuctures, obstacles and sport courts etc.

M&L for waterproofing treatement for internal/ external wall seepage surface clean by using wire brush scrapping with mechanical wall sander (having mechanical vacuum mechanism) after cleaning two coat of temp plast -2K chryso company or equivalent of Sikka and STP complete all as specified and directed. Note:- Work shall be carried out in patches 1 Sqm to 10 Sqm at different location.

Preparation of primed surfaces of wall / ceiling and applying two coats of Oil bound distemper including one coat of primer, complete all as specified and directed. (work to be carried upto 15 to 17 mtr height).

M/S S P BUILDERS

Sanjay Enterprises

Meher enterprises

M/s Himanshu Tyagi

G S CONSTRUCTIONS

M/s RAM RATAN AND SONS