Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.0 LAccepted-AOC | L1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L2₹46.8 L+₹1.0 L (2.19%)Rejected-Finance WARD NO 5 THIRIYA NIZAWAT KHAN BAREILLY 243123 UP | BAREILLY | BAREILLY | UTTAR PRADESH | 243123 | L2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L3₹49.0 L+₹3.2 L (7.03%)Rejected-Finance GE WEST BAREILLY | L3 | Rejected-Finance Over all rates are higher than L-1. |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
1 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST BAREILLY
GE WEST BAREILLY
SPECIAL REPAIR TO ROAD FURNITURE FOR ROAD OF RWA (ZONE - III), PROVISION OF BATHROOM AT BUNGALOW NO. T-06 PB MARG UNDER AGE B/R - II AND PROVISION OF CERTAIN MINOR WORKS UNDER AGE B/R - I OF GE (WEST) BAREILLY
2023_MES_630164_1
8160/C/E8
Open Tender
Civil Works
Item Rate
180 days
GE WEST BAREILLY
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE WEST BAREILLY
₹94,000
Yes
30 Jan 2024
28 Nov 2023
3 Jan 2024
28 Nov 2023
1 Jan 2024
14 Dec 2023
Amount
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for mild steel TMT bars 5 mm dia and over up to and including 10 mm dia as in stirrups, spacer and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed.
M & L for use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.
M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.
M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.
M & L for PCC M-15 type 1:2:4, using 20mm graded stone aggregate as in lintel upto 1.5m span in coping, floor finishes complete all as specified and directed.
M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster on other than fair faces of brick work or stone masonry surfaces with cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of white wash complete all as specified and directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed.
M & L for providing reinforced cement concrete 1:2:4 (Nominal Mix) type B-1, using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.
Material and labour for painting lines, dashes, arrows letter, marking etc of 3mm thick film on new surface or previously treated road surface with hot applied retro-reflective thermoplastic road marking paint (white/golden/yellow) confirming to MORT&H (clause 803.4) all as specified with 8% glass beads using special applicator machine with heating arregement upto 160 degree C including cleaning and drying the existing road surfaces to ensure dust, oil, grease and moisture free surfaces before applying the paint complete all as specified ans directed by Engring charge. Make- Automark/Asian paint/Berqer
S & F in repairs, delineator 1200mm long made of 2mm thick steel sheet rectangular OD size 75 mm x 100mm. Bottom plate 2mm thick of size 150 mm x 150mm for firm grip welded to base. Top end closed with 2mm steel sheet. At top in both sides diamond grade cube corner micro white reflector of size 75 mm x 125 mm laminated in 2mm deep cavity to make it scratch resistant. Post to have two bands all around of white/yellow/red reflective sheet of width 225 mm by keeping black coat as bands for greater night visibility. All coated with heat process and baked to 120 degree C or powder coated to make all weather resistant and fixing in cement concrete 1:2:4 with size of block 450mm x 450mm x 600mm deep including earthwork complete all as specified and directed. Note :- The rate of PCC & earth work is included in this item and nothing shall be paid extra. Make :- CAT part No. GPL-11-16 of Make :- Greenlite or equivalent make of 3M/ Dark eye.
S & F Two way reflective road studs (Cat eye) of dimensions 110mm x 128mm x 29.50mm (Model No:- DA 971) of impact resistance aluminium alloy body with Amber/ red/ white reflective panels and fixing the same on road surface by applying approximately 100 gm Epoxy mixture and placing the cat eye without applying excessive pressure and additional fixed with 12 mm dia and 120 mm long zinc plated steel hall at the centre of cat eye complete all as specified and directed by Engr-in-charge. Note :- (i) Model No DA - 971 of make Dark eye or equvalent model of 3 M (India Ltd) / Greenlite or any other make as approved by GE.
S & F Two way reflective Solar road studs (Cat eye) of dimensions 125mm x 125mm x 25mm (shank 60mm) (Model No:- DHRUV and make : Dark eye) of high efficiency mono -crystalline solar panel 2.4V / 0.30 Watt, one Ni-Mh or Ni-cd rechargable battery (1.2V / 1600MA), six super brit LEDs with 10000 to 18000 mcd (Millicandela), view distance upto 1000 meters, flash rate 2 Hz additional bearable weight of solar studs (10 Ton approx) with impact resistance aluminium alloy body with yellow/ red/ white/ green reflective panels and fixing the same on road surface by applying approximately 100 gm Epoxy mixture and placing the cat eye without applying excessive pressure and additional fixed with 12 mm dia and 120 mm long zinc plated steel nail at the centre of cat eye complete all as specified and directed by Engr-in-charge. Note :- (Model No.- DHRUV and Make : Dark eye)
Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out in soft / loose soil, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface complete all as specified and directed.
M & L for providing plain cement concrete, type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L for stainless steel framed work of pipes (Gde-304), hollow square/ rectanglar section, angle, tees, flat including gusset places etc and welding or riveting etc as required as in framed work foe sign board, railing, rills and other similar work etc complete all as specified and directed by Engr-in-charge.
M&L for 3 mm thick ACP sheet of any colour as approved one side covered with retro-reflective sheet & printing letters, number, comma, arrows etc with retro-reflective tape cut to size and with all necessary fixing rrangement complete all as specified and directed by Engr-in-charge.
Supply and fixing for speed raod bumps manufactured by HDPE/PE material highly resistant to serve impact and harsh weather condition including two way reflective studs are clearly visible to the motorists during night hours fiexd with appropriate epoxy and 4 or 6 Nos nails complete all as specified and directed. Note :- (Model NO.- DA1006, design ptent No. 206431 and Wt 2160gm, make : Dark eye or any other make as approved by GE.)
Supply and fixing for 1000mm dia convex mirror fixed with mild steel pipe with all necessary assoseries for clearly visible to the corner and curve or turning points of the road and fixing in cement concrete 1:2:4 with size of block 300mm x 300mm x 450mm deep including earthwork complete all as specified and directed.
Taking down chowkhats or frames area exc. 1.50 Sqm and n.exc 4.0 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
S & F of anodised powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators or partitions with one or more rebates including joining cleat etc. for fixing complete all as specified and directed.
S & F Aluminium Section Powder coated of colour as approved doors frame and shutters partly with 4.8mm thick reflective glass and partly closed with 5mm thick aluminium composite panel (alco panel) fixed with aluminium chamfered clip section no 4407 of aluminium door sections as under:- (a) frame (100 x 40 x 2) mm section No 2420 (b) Shutter style (85 x 44.45 x 1.7) mm thick section 4546 (i) Top Rail (14.30 x 44.45 x 1.7) mm thick section 4553 (ii) Middile Rail (83.50 x 44.45 x 1.7) mm thick section 4565 (iii) Bottom Rail (114.30 x 44.45 x 1.7) mm thick section 4529 (iv) Glazing clip powder coated 0.7mm thick section no 4407 (v) Handle Stainless steel 300mm long as approved (vi) Tower Bolt Powder Coated 9.90mm dia & 200mm long section No 4002 (vii) Mortice Lock 100mm 7 lever all as directed of Godrej Make (viii) rubber Gasket white PVC (ix) Namda Rope to be fixed in styles groove for proper air tightness (x) Top guide rail to be provided as per requirement to withstand adequate load of shutter to be installed at site for easy movement of shutter.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for sliding windows including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
S & F Aluminium Anodised grill (Anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 of approved design / pattern, with approved standard sectionand fixed to the existing window frame with CP brass / stainless steel screws @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, including Akuminium alloy wire cloth, 0.45mm nominal dia of wire and avergae width of aperture 1.40mm and fixed with aluminium wire staples all complete as per requiremnet and direction of engineer in charge.
S & F of double action heavy duty floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass and other parts made of mild steel complete all as specified and directed.
S & F Aluminium Composite Panel of approved colour fixed to frame work or door complete all as specified and directed.
S & F sheet glass black tinted / reflective 4.8mm thick (of any tint) or fixed and complete all as specified and directed.
S & F sheet glass 4 mm thick (of any tint) or fixed and complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.
M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6, including demolition of old brickwork complete all as specified and directed.
M & L for vitrified ceramic coloured tiles 10 mm thick (Square or Rectangular) polished, area of each tile not exc. 0.36 Sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough, including dismantling of floor / wall tile complete all as specified and directed.
M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.
M & L for preparation of new plastered or previously untreated surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and directed.
M & L for providing plain cement concrete, type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
S & F of 0.50 mm thick pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F of rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantry, rails, fastening, heavy bracket framing (Beam, tee, angle, channel or flat section), including distance pieces, cleats etc. confirming to Fe-410-S including cutting, welding etc. complete all as specified and directed.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.38 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile, including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.
M & L for 40 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.
Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. half brick but not exc. one brick thick wall complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.
M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in fair finished surface of concrete complete all as specified and directed
M & L for use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.
M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like complete all as specified and directed.
M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like complete all as specified and directed.
M & L for providing reinforced cement concrete M-25 (Design Mix), using 20 mm graded stone aggregate, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like complete all as specified and directed.
Removing surplus excavated material (SOIL) to distance exc. 250 m but not exc. 500 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.
M & L for hard core of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
M & L for providing 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed.
M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.
S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm thick wood grain printed PVC sheet and edges will be painted to match with printed sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2020) complete all as specified and directed.
S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed.
S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S & F of 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S & F of 150 mm long extruded anodised aluminium alloy handle, fabricated type complete all as specified and directed.
S & F of factory made steel window or ventilator fixed type with glazing bars complete all as specified and directed.
S & F of 4 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F of galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.
M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan and any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.
M & L for 40 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in damp proof course to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - WATER PROOFING COMPOUND WILL BE MEASURED AND PAID SEPARATELY.
M & L for rendering 5 mm thick cement plaster on surfaces of ceiling with cement mortar 1:3 finished even and fair without using extra cement complete all as specified and directed.
Supply only liquid water proofing compound complete all as specified.
M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.
M & L for glazed ceramic coloured tiles 350 mm X 250 mm X 7 mm thick or 450 mm X 350 mm X 7 mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar 1:4 finished even and fair complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls complete all as specified and directed.
S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S & F of 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
S & F of 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.
S & F of 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf per Sqcm and fixed to walls and ceilings or laid under floors complete all as specified and directed.
S & F of 15-18 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like, set in over and including 15 mm thick cement screed in cement mortar 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S & F of 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.
S & F of 15 mm bore fancy type, chromium plated stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F chromium plated brass wall mixer 3 in 1, 15mm for mixing both hot and cold water screwed both ends for iron pipe or for unions, complete all as specified and directed.
S & F in repair Vitreous china sensor enabled tap wsh basin with pedestal white, flat back, including waste coupling brass, waste pipe, chain and plug, and porcelain stopper barckets, complete all as specified and directed.
S & F in repairs vitreous china wash down water closet single piece-WC (cascade pattern) with UF seat cover, hinge, fixing accessories, cistern fittings, size 655 x 665 x 760mm, S-trap-300 white, including connection to drain pipe etc complete all as specified and directed. Make Jaquar Cat No LYS-WHT-38851S, CERA-S1013178, Parryware-C847K
S & F vitreous china bowl sensor enabled urinal flat back with grating and union for discharge pipe complete all as specified and directed.
S & F fancy type 15mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified and directed.
S & F fancy type glass corner 300mm radius of 10mm thick toughened glass with railing fixed with fancy type screws complete all as specified and directed.
S & F PVC waste pipe for urinal and wash basin complete all as specified and directed.
S & F of 15 mm bore fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S & F of 125 mm size brass chromium plated shower rose with or with out swivel joint including fixing to steel pipe or union complete all as specified and directed.
S & F of 20 mm dia brass chromium plated tubular towel rail ‘D’ type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.
M & L for 75 mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.
S & F of 500 Litre capacity rotational moulded polythene white in colour, triple layered water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part-I and hoisted, fixed in position complete all as specified and directed.
S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.
S & F of 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
M & L for 150 mm bore salt glazed stoneware drain pipes grade ‘A’ laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed.
M & L for cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.
M & L for cutting into existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia pipe complete all as specified and directed.
M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
M & L for preparation of newly plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M & L for preparation of new or previously untreated steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Supply and providing water proofing treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, Multiplas Standard, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL ltd having 10 years guarantee for water tightness complete all as specified and directed as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified 85/25 @ 1.2 Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/Sqm including cleaning surface, all as per manufacrers specifications. (b) Supply, Providing water proofing treatment with polymeric proofing membrane of 3Kg/Sqm HYPERPLAS STANDARD / MULTIPLAS STANDARD consisting of 100 micrn HMHDPE film centre core including coating the surface with the compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed. (c) Applying a coat of Aluminium Paint @0.20 litres per Sqm complete as per manufacrurers instructions.
M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.
S & F of 150 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.
S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
M & L for rendering 15 mm thick cement plaster on other than fair faces of brick work or stone masonry surfaces with cement mortar 1:4 finished even and smooth without using extra cement but using water proofing compound as per manufacturers instructions complete all as specified and directed.
S & F of 100 mm dia grating doom of PTMT (minimum weight 25 gram) complete all as specified and directed.
S & F fancy type brass chromium plated soap dish of size 160 x 160 x 90mm complete all as specified and directed.
M & L for 100 mm bore salt glazed stoneware drain pipes grade ‘A’ laid in trenches and jointed in cement sand mortar 1:1 with spun yarn complete all as specified and directed.
S & F vitreous chinaware white wash hand basin with pedestal of size 55 x 45 x 82 cm complete including fancy pillar tap, CP waste coupling, waste pipe, complete fixing arrangement and cutting for and pinning in wall and making good complete all as specified and directed.
S & F of 15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.
S & F of 15 mm bore concealed stop cock, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F Windows / Ventilators with pressed steel frame (size 95 x 45 x1.25mm) side hung shutter including box type hinges with steel handle and steel peg stay with glazed and openable shutter with glazing bar (open outside) dovetailed or welded complete all as specified and directed. Note:- (i) Two Shutters i.e, wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) Rate for filling PCC in frame deemed to be included in quoted rates. (iii) MS Grill shall be measured and paid seperately under relevant item)
S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with wooden beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S & F of point wiring for one light point / fan point / bell point / 5 Ampere socket outlet point (independent point), controlled by one, one way switch with 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded copper conductor cable (HR & FR) drawn into and including PVC conduit medium grade (not less than 20 mm dia) with and including its all necessary fittings and accessories fixed concealed with and including necessary chase cutting on brick / stone masonry walls and making good as per existing and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets, lamp holders, sketch fittings and covered with 3 mm thick plastic laminated sheet cover fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.50 sqmm size solid copper conductor cable as in earth wire and connecting all metal parts, to common earth dolly complete all as specified and directed.
All as per item No. 118 hereinbefore but wiring for one 3 pin 5 Ampere socket outlet point on the same board, controlled with other switches complete all as specified and directed.
All as per item No. 118 hereinbefore but wiring with using cable 2.50 Sqmm size and earth wire of PVC insulated (Green colour) 1.50 Sqmm size solid copper conductor cable for one 3 pin socket outlet, 15 Amperes on independent board complete all as specified and directed.
Supply and fixing of switch piano flush button single pole one-way 6 Ampere complete all as specified and directed.
Supply and fixing of shuttered socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), flush type 250 volts AC complete all as specified and directed.
Supply and fixing of switch piano flush button single pole one-way 15 Ampere complete all as specified and directed.
Supply and fixing of shuttered socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.
S & F of ceiling rose three phase, PVC / polycarbonate isolated body complete all as specified and directed.
S & F surface mounting LED light fitting aluminium extruded T-5 batten, 20 watt 4 feet, including all accessories prewired complete all as specified and directed.
M&L for sub main wiring with two single core 6.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. ( Note :- Two runs of 6.0 sqmm (FRLS), one run of 6.0 sqmm (FRLS) copper conductor and one run of PVC conduit shall be measured as one unit length)
S&F MCB SPN 63 Amp 415 volt, 10KA, 'C' curve suitable to fix in the DB complete all as specified and directed by the Engr-in-Charge.
S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.
Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv all as specified and directed.
Supply, fixing and testing of 300 mm sweep exhaust fan of sturdy engineering plastic single phase 230 volts complete with all accessories and self closing typed louvers including Making electric connection with two single core 0.50 Sqmm size stranded copper conductor cable of suitable length as per site requirement complete all as specified and directed.
Supply, fixing and testing of 400 mm sweep wall fan with copper wounded motor and oscilating mechanism 220 V 50 Hz AC complete all as specified and directed.
Supply and fixing AC Modular Box with top plug and MCB 32 Amps including modular box for mounting etc of capacity 32 Amp complete all as specified and directed.
S & F of lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.
S & F surface mounting LED light fitting aluminium extruded T-5 batten, 10 watt 2 feet, including all accessories prewired complete all as specified and directed.
S & F LED lamp, 12 watt 230 volt AC, integrated circuit rechargable type complete all as specified and directed.
S & F security light fitting, LED type, 20 watt, 6000K, pressure die cast housing with prismatic ploycarbonate diffuser & indivudual LED as light source with integrated electronic driver complete with GI Pipe mounting bracket of size 25/32mm dia and 1.20m long fixed to wall with and including nut, bolts, and GI clamps of size 50 x 6mm as required including two coats of synthertic enamel paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.
M&L for sub main wiring with two single core 4.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 4.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. ( Note :- Two runs of 4.0 sqmm (FRLS), one run of 4.0 sqmm (FRLS) copper conductor and one run of PVC conduit shall be measured as one unit length)
S&F MCB SPN 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.
Supply and fix flush sheet metal enclosure SPN DB 4 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv all as specified and directed.
Note :- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
RIYASAT ALI KHAN
Goel Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .