Supply of hand tools and machinary

Carpenter

Foot rule/steel tape Two ft. Four fold/6 mtrs. - Stainless Steel blade of length 300mmx width 25mmx18 gauge. Inch,cm & mm engraved on the scale

Steel Measuring Scale 12 inch

Marking Knife 200 mm length -Marking Knife 200 MM, material - High Carbon steel,(point end and chisel edge)

Trysquare, 200mm, - Carpenter Square 200 MM Length blade - 200mm Blade material- -tempered steel, stock 120 MM, material -cast iron steel

Bevel Square - 200mm Tempered steel Blade adjustable with fly nut, 200 mm blade length with Stock 100 mm

Carpenter marking gauge - Carpenter marking gauge.stem length 200mmx15mmx15mm - shisham wood & stock block 50 x 50 x 25 mm shisham woodThumb screw - steel point/pin - steel ,

Carpenter mortise gauge- Carpenter mortice gauge stem length200x 15x15mm - & Stock block 50mm x 50mm x25mm ,shisham woodwith Thumb screw , steel pin- one fixed andother movable in brass, pin adjustable

Hand Saw 450mm -open handle made of plastic ,length of blade -450mm taper blade material - high carbon steel

Tenon saw 300mm - Saw tenon 300 MM Wooden handle closed , length ofblade 300mm parallel , high carbon steel

Metal Jack plane 335mmX 50mm cutter - Plane jack metal 335 x50 mm cutter, stock length -335mm -carbon steel cutter, width 50mm,cast iron body, handle & knob wooden/plastic

Metal smoothing plane 200mm X 50mm cutter - Plane smoothing metal 200x50 mm cutter, stock length -200mm - cast steel cutter width .50mm high carbonsteel

Firmer Chisel Bevel edge 6mm. - Chisel Firmer(Bevel edged) seasoned hard sheesham Wooden handle with ferrule(top & bottom), blade - high carbon steel width of blade 6 mm

Firmer Chisel Bevel edge 10mm. -Chisel Firmer(Bevel edged) seasoned hard sheesham Wooden handle with ferrule(top & bottom), blade - high carbon steel width of blade 10 mm

Mortise chisel 06 mm -Chisel Mortice seasoned Wooden handle with ferrule (top & bottom), blade - high carbon steel width of blade 6 mm

Mortise chisel 10 mm - Chisel Mortice seasoned Wooden handle with ferrule (top & bottom), blade - high carbon steel width of blade 10 mm

Mortise chisel 15 mm - Chisel Mortice seasoned Wooden handle with ferrule (top & bottom), blade - high carbon steel width of blade 15 mm

Screw Driver, 300mm -Screw driver (Cabinet maker 300 MM ) Length of blade -300mm Handle made of plastic/Nylon,branded,Blade material - High carbon steel

Mallet, medium size - Mallet medium size, size - 6''( slight curved type)material - Hard shisham wood, handle - Taperedrectangle type

Claw hammer 500 gms- Claw hammer drop forged carbon steel with seasoned hard seesham wood handle, hardened and tempred ends, chorme plated Wt. 500 gm.

Oil stone Carborundum universal silicon carbide combination rough and fine. - Oil stone (Carborundum)(Universal silicon carbidecombination rough and fine) 200 x 50 x 25 mm, for sharpening

Contraction measuring scale as per standard size- Construction scale 1metre, Length - 1 meter x 25 mm x 16 gauge thicknessmaterial - stainless steel graduation in mm,cm andinches engraved on it.

Hand brush for cleaning 450mm Standard size

Measuring tape - Measuring Tape 3 Meter, blade material- spring steel, graduation in mm, cm & inches, casingplastic or metal

Construction scale - 1 meter Length - 1 meter x 25 mm x 16 gauge thicknessmaterial - stainless steel graduation in mm,cm andinches engraved on it.

Spring caliper- inside 150 mm, Length & leg - 150mmmaterial leg - medium carbon steel,heavy duty cast alloy body hardened steel point, fully polished

Spring caliper - outside 150 mm Length & leg - 150mmmaterial - medium carbon steel, heavy duty cast alloy body hardened steel point, fully polished

Wing Compus - Carbon steel 300 mm length, heavy duty cast alloy body hardened steel point, fully polished

Trammel - a pair of steel trammel point, length of point 100 mm, length of steel beam 450mm

Sprit Level, 300mm - body stainless steel, length 300 mm

Rip saw 600 mm -high carbon steel 600 mm, plastic handle

Cross cut saw 250 mm - high carbon steel, 600 mm, plastic handle

Key hole saw 250 mm - high carbon steel (250mm blade tapered)seasoned wooden handle

Fret saw frame 150 mm -Fret saw frame 150 mm, Depth of frame - 150mmmaterial frame - castiron, blade- H.S.steel

Compass saw 350 mm - high carbon steel (length 350mm, blade tapered)seasoned wooden handle

Adze 15 kg material- forged steel, handle - seasoned hard seeham wood.

Trying plane metal 450 mm X 60 mm Cutter

Plane rivet adjustable 250 mm X meters x 9 mm Cutters

Plough plane with set of 8 cutter up to 12 mm Width body metal, cutter width 3,4,5,6,8,10and 12 mmmaterial - high carbon steel

Spoke shaves- 50 mm Cutter body metal material - high carbon steel

Plane adjustable circular 250 mm - Body Metal - adjustable,stock size - 250mm, sole flexible, spring steel, cutter 45mm

Router plane 197 X 42 mm Body hard seasoned sheesham wood with cutter

Moulding plane set - Body hard seasoned sheesham hard wood with cutter

Cabinet scraper, 100mm - Cabinet scraper 100 mm Blade width - 100mm highcarbon steel, with handle wooden

Gauge chisel, firmer 10 mm- width of curvedblade,10mm, materialhigh carbon steel seasoned hard seesham wood handle

Gauge chisel, firmer 12 mm width of curved blade 12mm, material high carbon steel, seasoned hard seesham wood handle

Gauge chisel, firmer 16 mm - width of curved blade 16mm material high carbon steel, seasoned hard seesham wood handle

Gauge chisel, firmer 20 mm - width of curved blade 20mm material high carbon steel, seasoned hard seesham wood handle

Gauge chisel, firmer 6mm - width of curvedblade 6mm,10mm,12mm,16mm and 20mm materialhigh carbon steel seasoned hard seesham wood handle

Gauge chisel, scribing 6 mm - width of curved blade 6mm,material high carbon steel, seasoned hard seesham wood handle

Gauge chisel, scribing 10 mm- width of curved blade 10mm,material high carbon steel, seasoned hard seesham wood handle

Gauge chisel, scribing 12 mm - width of curved blade 12mm,material high carbon steel, seasoned hard seesham wood handle

Gauge chisel, scribing 16 mm - width of curved blade 6mm,16mm material high carbon steel, seasoned hard seesham wood handle

Gauge chisel, scribing 20 mm - width of curved blade 20mm material high carbon steel, seasoned hard seesham wood handle

Ball pin hammer, 600g - weight - 600gms Handle - hard shisham wood body - forged steel

Cross Pin Hammer, 600g- weight - 600gms,with wooden handle- forged steel

Screw driver 450 mm - cabinet type , length of blade -450mm, handle plastic/ nylon , blade - toughened steel

Screw driver 250 mm - cabinet type , length of blade -250mm, handle plastic/ nylon , blade - toughened steel

Screw driver 150 mm- cabinet type , length of blade -150mm, handle plastic/ nylon , blade - toughened steel

Pincer, 50mm - Drop forged from Carbon Steel. Body Hardened & tempered.Heads Polished, length 200 mm.

File half round 2nd cut 250 mm - material - high carbon steel with hard seesham wood handle

File half round Wood rasp bastard 250mm -material - high carbon steel with hard seesham wood handle, 250mm

File slim taper 100 mm - material - high carbon steel hard seesham wood handle, 100 mm

File slim taper 150 mm - material - high carbon steel hard seesham wood handle, 150 mm

Card file (steel) wire brush for file 200 mm -Card file (steel)wire brush for file size 200 mm with wooden body

Hands drill 6 mm Capacities - MAX DRIL DIA 6MM , RATED VOLTAGE- LAGGING 110-220VOLT, NO OF LOAD SPEED 0-3000RPM, WEIGHT 2KG FRQ. 50-60 HTZ, RATED INPUT VOLTAGE 550 WATT

Country drill with bow (ball bearing type) 620 X 726 mm -body hard shisham wood with ball bearing & bit chuck with bow

Ratchet brace 250 mm Swap- Ratchet brace 250 mm swap chuck size -up to 12mm capacity with handle

Hand auger 10 mm - material - high carbon steel handle - wooden

Hand auger 12mm - material - high carbon steel handle - wooden

Hand auger 14 mm - material - high carbon steel handle - wooden

Hand auger 16 mm - material - high carbon steel handle - wooden

Hand auger 18 mm - material - high carbon steel handle - wooden

Hand auger 22 mm - material - high carbon steel handle - wooden

Hand auger 25 mm - material - high carbon steel handle - wooden

Centre bits 6 - Centre bits 6 mm,material - high carbon steel.

Centre bits 8 - Centre bits 8 mm,material - high carbon steel.

Centre bits10 - Centre bits 10 mm,material - high carbon steel.

Centre bits 12 - Centre bits 12 mm,material - high carbon steel.

Expansion bit sets 218 X 171 mm - Expansion bit sets Range 1/2 '' to 2'' adjustablematerial - high carbon steel

Twist drill bits 6,8,10,12 mm -Drill bits 6,8,10,12 mmmaterial H.S steel

Counter sink bit rose type 12 mm - material H.S steel,12 mm

Breast drill 6 mm. Capacity -1. Cast Iron Body (Graded Casting)2. Wooden Handle for gripping 3. Heavy Duty Precision 3 Jaw Drill Chucks4.6mm capacity mannualy operated

Centre Punch, 5mm -H.C steel,5mm, Length 100 mm

Snip straight 200 mm - material-Carbon steel, 200 mm length

Oil cans 225 X 225 mm -

Combination side cutting pliers 200 mm length ,insulated grip

Plunger saw set/ pistol grip type. 300 X 300 mm - Plunger saw set / pistol grip type Length - 8'', opening3mm, body Carbon steel

Number punch 12 mm. - 10mm Letter Height, Easy to Read Font High carbon Hardened Steel w/ anti chip striking face, Plastic Case.

Slip stone 100 mm - Slip stone 100 mm carborundum . Silicon carbide size -100mm

Round crow bar with chisel and claw end 1070 x 25mm - material -high carbon steel

G' clamp 100 mm - size-100mm, frame - cast/ malleable bodyspindle - steel handle with swivel head

G' clamp 150 mm - size-150mm, frame - cast/ malleable bodyspindle - steel handle with swivel head

G' clamp 250 mm - size-250mm, frame - cast/ malleable bodyspindle - steel handle with swivel head

T' bar cramp 0.6 meter - size - 0.6meter , material - malleable/SG Iron jaws, fine thread spindle (jaws) rod - steel

T' bar cramp 1.25 meter - size - 1.25 meter , material - malleable/SG Iron jaws, fine thread spindle (jaws) rod - steel

T' bar cramp 1.75 meter - size - 1.75 meter , material - malleable/SG Iron jaws, fine thread spindle (jaws) rod - steel

Carpenter vice, 250mm jaw - Materials :-Body and sliding jaw : SG cast Iron of guaranteed strength.Slide Bars : Solid SteelMain Screw : High Quality SteelBody- SG Cast iron with steel spindle

Saw sharpening vice 250 jaws -Saw Sharpening Vice Materials :-Body and sliding jaw : SG CAST Iron of guaranteed strength.Slide Bars : Solid SteelMain Screw : High Quality SteelBody-SG Cast iron with steel spindle

Carving tools set - MaterialsBlades : High precision chrome vanadium alloy steelHandles : Seasoned hard wood, front end covered by steel Polished ferrule.

Goggles pair - good quality plane glass

Glass cutter - Glass cutter Diamond tip

Nail punch - Nail punch length - 100mm material - H.C. steel ,knurled center portion

Surface plate 600x 600 mm - cast iron, smooth surface 600 x 600 x 100 mm

Carpenter work bench - body cast iron , top seasoned shisham hard wood, two side planks 250mmx50mm,centred well top30mm,side thickness 100mm, (2400x920x800mm

Blower - Capacity 2.0 mm3/min , Watts input (full load) 750 watts Nozzle air Velocity 400 kmph , ,With accessory

Grease gun- Grease gun Hand operated capacity - 500ml

Spanner double ended , set of 14 -Carbon Steel Mat Finish Heads Short Pattern Drop Forged Chrome Plated set of 14 , 6-32 mm

Fire buckets - Standard Fire Buckets made of GI material,Red painted and round bottom with handle and must be of 9 Litre Capacity and stand have to arrangement for hanging of 4 Buckets.stand made of MS Angle 35mm x 35mm x 4 mm.

Steel locker, 8 compartment with individual locks 1980X910X480 mm

Steel almirah with self 1980X910X480 mm

Portable circular saw machine - 1150 W powerfull motor ,speed 5000 rpm, Max depth of cut : 65mm With accessory

Portable planning machine - 600 W powerful motor,speed 15000 rpm, max. depth of cut 2.5mm, Planer width 82mm, With accessory

Power drill machine- Portable power drill having hammering option capicty- 20 mmRPM- 2500, watt- 500, body aluminium,With accessory

Portable sander machine - 170 watt powerfull motor,orbits/strokes,13500/min,wt-1.2kg(approx)With accessory, body aluminium

Portable jig saw machine - Minimum 700 W powerful motor,Stroke length 26mm, capacity in mm metal 4 wood-130.,4stroke pendulum action,Stroke 0-3100/min, With accessory,body aluminium

Portable router machine - 800W powerful motor ,speed 27000rpm, collect size 6.35mm,plunge stroke 35mm, With accessory,body aluminium

Power screw driver - body aluminium 440 watt powerfull motor speed 0-1000 rpm maximum,With accessory

Combined surface and thickener - Combined Surface and thickner -maximum plaining with450mm,thicknessing capacity 9 inch,power 3HP,1440 rpm,3 ph,,With accessory

Circular saw machine, 300 mm dia - Circular saw machine, 300mm dia -circular saw - max. depth of cut - 4.5 inch, work tablesize- 36x30 inch, power - 3HP, 1440 RPM, 3 PHASE, with Motor and adjustable cutter,With accessory

Lathe, - Wood turning lathe, 150mm height of centers, 1.75 meter bed. -centre distance 150 mm, Bed length 1.75 meter, 3 hp motor, 3 phase

Set of turning tools for above (wood turning) lathe machine

Tenoning machine (single ended) - Tenoning machine (Single ended) -Working ht. 864 mm,cutter dia.200 mm, Power 2 HP, Tenening capacity 200 mm, weight. 300Kg(Appxt.), slide size 635 x 229 mm,, with accessory

Mortising machine (combine hollow chisel and chain) - 1)Mortising machine chisel type chain. Depth of cut 3 1/2", cross moment of table - 4'', longitudinal movement -9'' 1HP 2500 rpm 3ph ,2) Mortising machine chain type up down moment oftable - 3'' longitudinal movement - 12'' depthof cut (max) 5 1/2 '' 2HP, 1440 rpm 3phase motor 1/2 ''chain, with accessory.

Bench grinder, 200 mm hole D.Epedestral - Bench grinder double end pedestal, 200mm wheel -dia, 1 Hp single phase motor with rotary switch, 2800 RPM, wheel guard with rest for ,supporting,With accessory

Drill machine 12 mm - Piller type Drill machine with drill chuck, 12mm capacity -one HP single phase moter ,With adjustable table, With accessory

Portable electric drill ,6 mm capacity (Wolf type) - 500 watt powerful motor,speed 2400 RPM,capacity in MM,MS 10,wood 25

Drill Chuck, 12mm - drill chuck, 12mm capacity with sleves and key

Portable disc sander 200 mm. Dia - 1400 watt powerful motor,speed 10000 RPM,weight 2.5 kg(approx.),With accessory

Adjustable saw sharpener - Adjustable saw sharpener Automatic band sawsharpiner 0. 75 KW, 2880 rpm , width of blade 1'' to 2''with saw setting & sharpening,With accessory

Electric heater 1000/1500 W

Moisture meter - Moisture meter Digital type battery operated

Universal Wood working machine - Universal wood working machine - length of bed: 1155/45 inch, height centre: 8 inch, admit between centre: 48 inch, approx. spindle speed: 700/ 1400/2800 , power: 2 HP, 1440 RPM, SINGLE phase with motor function to be reqd

Electrical drying oven (small type) - digital temperature control providesprecise and accurate control of drying temperature,With accessory

Band saw machine with provision - Diameter of Saw Wheels 533 mm ,Maximum Cutting Cap. 315 mmThroat Depth 495 mm ,Table Size /610 x 610 mmWidth of Saw Wheels 40mm ,Table Height From Floor 915 mmApprox., Speed of Saw Wheels 700 RPM Power Required 3 HP with moter , Saw Blade Size 3985mm, With accessory

Sikdar Scientific Agency

ADVANCE INSTRUMENTS

UNITECH CORPORATION

DELTA TECHNOLOGIES

UNITECH CORPORATION

Sikdar Scientific Agency

ADVANCE INSTRUMENTS