CONSTRUCTION OF AYURVEDIC HEALTH CENTRE BUILDING AT LANDIAYARA TEHSIL DADA SIBA DISTT KANGRA H.P SUB HEAD C.O BUILDING PORTION I.C WATER SUPPLY AND SAINTERY INSTALLATION AND SEPTIC TANK

Amount

Excavation in foundation trenches etc. in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (one cement isto six sand isto twelve graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, excluding the cost of form work in foundation and plinth/under floors in all depths including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specifications or as directed by the Engineer-in-Charge and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (un coursed/brought to courses) with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and depths, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etcetera up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters)thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage materials of within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimeters) nominal size) including curing complete excluding the cost of form work in foundation and plinth up to all heights/depths including pumping or bailing out water, dewatering up to any depth and any quantum of water complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete, 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size), mix designed, so as to give a compressive strength corresponding to RCC grade M-20 (M-twenty ) with minimum cement contents of 320 Kg (three hundred twenty kilogrammes) per cubic meter including curing complete, as per HPPWD specifications or as directed by the Engineer-in-Charge excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/ thickness upto all floor level. including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete, 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size), mix designed, so as to give a compressive strength corresponding to RCC grade M-20 (M-twenty five) with minimum cement contents of 320 Kg (three hundred twenty kilogrammes) per cubic meter including curing complete, as per HPPWD specifications or as directed by the Engineer-in-Charge excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness upto all floor level, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete, 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size), mix designed, so as to give a compressive strength corresponding to RCC grade M-20 (M-twenty five) with minimum cement contents of 320 Kg (three hundred twenty kilogrammes) per cubic metre mechanically mixed and vibrated curing complete to give smooth and even surfaces including centering and shuttering etcetera in String courses coping bed plates, achor blocks plain window sills and the like etcetera in all girth where ever required as per drawing and design complete up to all heights up to all floor level but excluding the cost of reinforcement and as per HPPWD specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying damp proof course 38mm (Thirty eight millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (twelve decimal five millimeter) nominal size and curing complete including cost of form work and as required at site and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (eighty/hundred) or equivalent using 1.70 Kgs. (one decimal seven zero Kilogram’s) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads, lifts and other incidental and as per the direction of Engineer-in-Charge. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth upto all heights/depths including pumping or bailing out water/dewatering including racking out joints in cement mortar 1:5 (one cement isto five sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in foundation and plinth in mud mortar complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Second class half brick work using common burnt clay building bricks in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement isto four sand) shall be provided with hoop iron and curing complete including carriage of materials within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Stone filling dry hand packed tightly, under floors, complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and filling brick bats/crushed stone aggregate 40mm (forty millimetre) nominal size in soak pit complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying upto all floor level, 20mm (twenty millimeters) thick automatic hydraulically compressed and polished precast terrazzo tiles ISI marked number IS-1237 of approved brand/make and of approved shade, with marble chips of specified sizes laid in floors, treads of steps and landings, on a bed of 25mm (twenty five millimeters) average thickness of cement mortar 1:6 (one cement is to six sand) jointed with white/grey cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of medium shade as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying upto all floor level, 20mm (twenty millimeters) thick automatic hydraulically compressed and polished precast terrazzo tiles ISI marked number IS-1237 of approved brand/make (NTC/GTC Make) and of approved shade, with marble chips of specified sizes laid in skirting, risers of steps and dado upto any height, laid on 10mm (ten millimeters) average thickness of cement plaster 1:3 (one cement is to three sand) jointed with white/grey cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of medium shade as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying 30cmx30cm (Thirty centimetre into thirty centimatre) cement concrete chequred of approved brand and manufacture of required shade and colour in flooring treads and steps and landind laid over a bed of 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles as required complete as per specification as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/stone walls for interior plastering upto all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:3 (one cement isto three sand), upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:3 (one cement isto three sand) in single coat on fair side of brick/concrete/stone walls for interior plastering up to all floor levels, including arises, internal rounded angles, chamfers and/or rounded angles, in all girth and finished even and smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Applying priming coat on new concrete/masonry/ asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with ready mixed primer of approved brand and manufacture (Narolac/Asian paints) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Applying Birla White wall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final finish to the surface complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture (Nerolac/Asian or equivalent make) and of required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with distemper, primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth and carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture (Nerolac Surksha/Apex exterior) and of approved shade on undecorated wall surfaces (two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, other foreign matter and sand papered smooth including applying of putty as required for making the surface smooth complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

15mm (fifteen millimeter) thick plain cement mortar band in cement mortar 1:4 (One cement isto four sand) above 300mm (three hundred millimetre) width Flush Band complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying upto all floor level White glazed tiles of approve make (Kajaria/Nitco) 20x20cm (twenty into twenty centimeters) and 6mm (six millimeters) thick in skirting, risers of steps and dado for all heights, on 12mm (twelve millimeters) thick cement plaster 1:3 (one cement is to three sand) and jointed with white cement slurry complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing angle iron doors, windows, clerestory windows, frame manufactured from M.S. angle iron 40x40x6mm (forty into forty into six millimeters) thickness including hinges, jamb, lock jamb, beed and if required angles thrashold of mild steel angles 50x25mm (fifty into twenty five millimeter) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) thick with provision for locking arrangement and shock observe as specified and applying a coat of approved steel primer after pretreatment of the surface complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing angle iron door window, clerestory window frames (double rebate) manufactured from M.S angle iron section 40x40x6mm (forty into forty into six millimeters) and M.S flat 50x6mm (fifty into six millimeters) and M.S flat of 25x6mm (twenty five into six millimeters), combined together to make one frame as per design and drawing including hinges jamb, lock jamb, beed and if required angle thrash hold of mild steel angle 50x25mm (fifty into twenty five millimeters) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 40mm (forty millimeters) thick ISI marked phenol bonded (ALPRO/Kit ply or equivalent make) flush door shutters, Number IS 2202 factory made panels ISI marked No. IS:1003 decorative type core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including black enamelled M.S. butt hinges complete as per HPPWD specifications or as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing flush door shutters core of black board construction with frame of first class hard wood and well matched firtst class Indian teak ply veneering with vertical grains of cross band and face vaneers on one face and commercial ply veneering with vertical grains of cross band on other face of shutters 40mm (forty millimetre) thick including black enamelled M.S. butt hinges complete as per HPPWD specifications or as per the directions of the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 40mm (forty millimeter) thick second class Deodar Wood wire gauze shutters using galvanized MS wire gauze of IS gauge designation 85-G (eighty five-G) with wire of dia 0.56mm (zero point five six millimeters) for doors, windows and clerestory windows including bright finished black enamelled iron butt hinges, with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, fabricated of standard rolled steel sections joints, mitred, and welded with 16x3.15mm (sixteen into three decimal fifteen millimeters) lugs 10cm (ten centimeters) long embedded in cement concrete block 15x10x10cm ( fifteen into ten into ten centimeters) size of 1:3:6 ( one cement isto three sand isto six graded stone aggregate 20mm ( twenty millimeter) nominal size or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting including providing and fixing of glass panes with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. Side hung windows.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, fabricated of standard rolled steel sections joints, mitred, and welded with 16x3.15mm (sixteen into three decimal fifteen millimeters) lugs 10cm (ten centimeters) long embedded in cement concrete block 15x10x10cm ( fifteen into ten into ten centimeters) size of 1:3:6 ( one cement isto three sand isto six graded stone aggregate 20mm ( twenty millimeter) nominal size or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting including providing and fixing of glass panes with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. Fixed steel windows.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, fabricated of standard rolled steel sections joints, mitred, and welded with 16x3.15mm (sixteen into three decimal fifteen millimeters) lugs 10cm (ten centimeters) long embedded in cement concrete block 15x10x10cm (fifteen into ten into ten centimeters) size of 1:3:6 ( one cement isto three sand isto six graded stone aggregate 20mm ( twenty millimeter) nominal size or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting including providing and fixing of glass panes with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. Top hung ventilators.

Providing and fixing angle iron cup board frame manufactured from M.S. angle iron 25x25x5mm (twenty five into twenty five into five millimeters) thickness including hinges, jamb, lock jamb, beed and if required angle thrashold of mild steel angles 25x25mm (twenty five into twenty five millimeter) welded or rigidly fixed by mechanically means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five millimeters) each with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surfaces complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing M.S. fan clamps type-1 of 16mm (sixteen millimeters) dia M.S. bars bent to shape with hooked ends in RCC slab during laying including painting the exposed portion of loop, all as per standard design complete as per HPPWD Specification or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, royality, octroi, toll tax or any taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimeter) thick prepainted steel sheet in roofing over steel truss (kolermetal or equivalent make) with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (TWENTY) microns over 5 (five) microns of primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating incluing fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diametre with prepainted limpet and rubber washer complete with all accessories as required as per direction of Engineer-In-charge and as per HPPWD specifications, including carriage of materials within all leads, lifts, and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing ridges or hips 60cm (sixty centimeters) over all, with kolermetal or equivalent make 0.60mm (zero point six zero millimeters) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating incluing fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diametre and prepainted G.I limpet and bitumen washer complete with all accessories as required as per the direction of Engineer-In-charge and as per HPPWD specification, including carriage of materials within all leads, lifts, and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing valleys 60cm (sixty centimeters) overall with 0.60mm (Zero point six zero millimeter) thick pre painted steel sheet in roofing (kolermetal or equivalent make) with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diametre with prepainted G.I limpet and bitumen washer complete with all accessories as required as per direction of Engineer-In-charge and as per HPPWD specifications, including carriage of materials within all leads, lifts, and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 0.63mm (zero pint six three millimeters) thick plain GI (galvanized iron) sheet 15cm (fifteen centimeters) wide 45cm (forty five centimeters) deep over all semi-circular plain G-I sheet gutter with iron brackets 40x3mm (forty into three millimeters) size, bolts, nuts and washers etc. complete including making necessary connections with rain water pipe complete as per design/drawings complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing M.S. black plain sheet 1.66mm to 2.00mm (one point six six millimeter to two point zero zero millimeters) thick in facia/eaves boards/ soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per HPPWD specifications or as directed by the Engineer-in-Charge, (base members of steel work shall be measured and paid for separately), including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work, composed of beams, joists, channels, angles, tees, flats and connecting plates or angle cleats etc. as in trusses and trussed purlins, main and cross beams, hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.:- In trusses and trussed purlins in buildings.

Providing and fixing MS round holding down or anchor bolts with nuts and washers plates complete, as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing on wall faces Poly Vinyl Chloride (D-plast or equivalent) accessories for rain water pipes including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. PVC plain bend 100mm (one hundred millimeters) dia.

Providing and fixing on wall faces Poly Vinyl Chloride (D-plast or equivalent) accessories for rain water pipes including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. PVC plain shoes 100mm (one hundred millimeters) dia.

Providing and fixing on wall faces 100mm (One hundred millimeters) diameter Poly Vinyl Chloride (D-plast or equivalent) rain water pipes of working pressure not less than 4.5 Kg (four point five kilogramme) per square meter including filling the joints with approved adhesive complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals.The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 19mm (nineteen millimeter) thick water proof ISI marked commercial board shutters for cup boards, including fixing with nickel plated piano hinges and screws etcetera complete including 6mm (six millimeter) thick hard wood edging complete as per HPPWD specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing cabinet work made of 19mm (Nineteen millimetre) thick water proof termile proof commercial board with shutters of 19mm (Nineteen millimetre) thick commercial board including fixing with nickel plated piano hinges with screws etc complete as per HPPWD specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. 300x16mm (three hundred into sixteen millimeters).

Providing and fixing anodized aluminum sliding door bolts anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. 250x16mm (two hundred fifty into sixteen millimeters).

Providing and fixing aluminum tower bolts (Barrel type) anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. (a) 250x10mm (two hundred fifty into ten millimeters).

Providing and fixing 125mm (one hundred twenty five millimeters) aluminium handles make of pilot/sheel or equivalent transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) aluminium handles make of pilot/sheel or equivalent transparent or dyed to required colour and shade with necessary screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 65x35mm (sixty five into thirty five millimeters) special quality bright finished brass cup board locks or wardrobe locks of approved make (Harrison or equivalent make) with six levers including necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeters) bright finished brass floor door stoppers with rubber cushion and necessary screws etcetera to suit shutter thickness complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) oxidized M.S. double acting spring hinges with necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 200mm (two hundred millimeters) size oxidized mild steel hooks and eyes complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimetre) long bright finished brass finger plate 65x1.6mm (Sixty five into one point six millimetre) including necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 50cm (Fifty millimetre) long bright finished brass kicking plate 100x3.15mm (One hundred into three point one five millimetre) including necessary screws etcetera complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing bright finished brass ball catcher 10mm (Ten millimetre) dia complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing 40x3mm (forty into three millimetre) flat iron hold fast 40cm (Forty centimetre) long including fixing to frame with 10mm (Ten millimetre) diameter bolts and nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (Thirty into ten into fifteen millimetre) 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (Twenty millimetre) nominal size) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing ridges and hips in asbestos cement sheets roofing with G.I.J or L hooks, bolts and nuts 8mm (Eight millimetre) dia metres G.I. plain and bitumen washers complete complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing M.S. plain grills of required patterns in wooden/steel frames of window etc. with M.S. flat, square or round bars bolts and nuts or screws including welding with frame complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing railing with hand rial of square/retangular M.S flat complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying 20mm (twenty millimeters) thick white makrana marble work (table rubbed and polished) in flooring laid over 20mm (twenty millimeters) thick base in cement mortar 1:3 (one cement is to three sand) including jointing with cement mortar 1:2 (one white cement isto two marble dust) with an admixture of pigment to match the shade of marble complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with enamel paint of approved brand and manufacture (Narolac/Asian or equivalent paints) and of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint of approved brand and manufacture (Narolac/Asian or equivalent paints) and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing under layer for plinth protection of 75mm(Seventy five millimeters) thick (unconsolidated) bed of dry brick/stone aggregate 40mm(Forty millimeters) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing plinth protection 50mm (fifty millimeters) thick cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate ) 20mm (twenty millimeters) nominal size) including finishing the top surfaces of concrete smooth as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Constructing course rubble hammer dressed ‘U’-shape open surface drain with side wall 15x22cm (fifteen into twenty two centimeters) in cement mortar 1:6 (one cement is to six sand) and in side plastering with cement mortar 1:3 (one cement is to three sand) including earth work and laying 10cm (ten centimeters) cement concrete in 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeters) nominal size) and 7.5cm (seven point five centimeters) cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) and finished with a floating coat of neat cement complete as per standard design and drawings and HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying in trenches ISI marked 20mm (twenty millimeters) nominal bore galvanized mild steel tubes (medium grade) tube fittings of approved brand and manufacture (TATA/JINDAL make) complete as per HPPWD specifications. (Earth work in trenches to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 20mm (twenty millimeters) nominal bore galvanized mild steel tubes (medium grade) tube fittings and clamps of approved brand and manufacture (TATA/JINDAL make) including making good the walls, ceiling and floor, up to all floor levels complete as per HPPWD specifications including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing to wall ceiling and floor ISI marked 15mm (fifteen millimeters) nominal bore galvanized mild steel tubes (medium grade) tube fittings and clamps of approved brand and manufacture (TATA/JINDAL make) complete as per HPPWD specifications including making good the walls, ceiling and floor up to all floor levels and carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing P.V.C bend (D-Plast) or its equivalent plain bend of ISI marked including fixing with approved adhesive complete as er HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. Plain bend 110mm (One hundred ten millimeter) nominal bore/diameters.

Providing and fixing PVC (D-Plast) or its equivalent tees of ISI marked including fixing with approved adhesive etc complete as er HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. 110mm dia. (One hundred ten millimeter) nominal bore/diameters.

Providing and fixing IS marked Big size No.-20416 Hindware or its equivalents vitreous China wash down water closet (European type WC pan) having size 670x375x880mm (Six hundred seventy into three hundred seventy five into eight hundred eighty millimetre) confirming to BIS specification with itegral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one Sand) (Seat and cover to be measured and paid separately) Anglo Indian Universal closet complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE orrisa pattern vitreous china water closet squatting pan (Orrisa type W.C. pan Big size-2071 size 580mmx440mm (Five hundred eighty millimetre into four hundred forty millimetre) confirming to BIS specification (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing ISI marked sand cast iron 100mm ( one Hundred millimeters) size “P” or “S” trap for water closet (squatting pan) including jointing the trap with pan and soil pipe in cement mortar 1:1 (one cement: one sand), complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing HIND WARE/CERA or equivalent MAKE poly Venyl Chloride 5.00 (five liters) capacity low level flushing cistern item No. 2603 with a pair of CI or MS brackets complete with fittings such as lead valves less siphon, 15mm (fifteen millimeter) dia brass ball valve with polythene float, CP brass handles, unions and couplings for connection with inlet, outlet and over flow pipes 40mm (forty millimeters) dia PVC flush bend and cutting holes in walls and making good the same including connecting the flush bend with cistern and closet complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing HIND WARE/CERA MAKE flat back 630mmx450mm (six hundred thirty millimeter into four hundred fifty millimeter)vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding the cost of fittings including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing ISI marked, stainless steel kitchen sink 610x510mm (six hundred ten into five hundred ten millimeters) with bowl depth 200mm (two hundred millimete) diamond model Code No. WB-2116 complete with drain board and C.P waste with C.I or M.S brackets painted white including cutting holes and making good the wall but excluding fitting including carriage of materials with in all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters PVC waste pipe for wash basin or sink including brass check nut complete including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 600x20mm (six hundred into twenty millimeters) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing (Jaguar or equivalent make) 15mm (Fifteen millimeters) diameters C.P. brass bib tap with capstan head complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing (Jaguar or equivalent make) 15mm (Fifteen millimeters) diameters C.P. brass Pillar tap with capstan head complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing 15mm (fifteen millmeters) C.P. brass angle valve without nuts and pipes including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing (Jaguar or equivalent make) 15mm (fifteen millimeter) diameter CP brass stop cock complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore PVC connection pipe with brass unions complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and placing in position three layered PVC water storage tank, sintex or equivalent make and of 500 (five hundred) liters capacity complete in all respects, with G.I inlet and outlet connection, 15mm (fifteen millimetre) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including proving pads of sizes as required for inlet and outlet complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Constructing man hole with RCC top slab in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) mix foundation concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeters) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) finished smooth complete including curing and testing. Inside size 800x800mm (eight hundred into eight hundred millimeter) and upto any depth and including C.I. cover with frame (light duty single seal pattern-I) 455mmx610mm (four hundred fifty five millimeters into six hundred ten millimeters) internal dimensions total weight of cover and frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme (a) with 200mm (two hundred millimeter)thick walls of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement isto three sand) complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Constructing brick masonry chamber for under ground CI inspection chamber and bends with second class common burnt clay building brick in cement mortar 1:5 (one cement : five sand) CI cover with frame light duty 455x610mm (four hundred fifty five into six hundred ten millimeters) internal dimensions total weight of cover with frame to be not less than 38 kg (thirty eight kilogramme) (weight of cover 23 kg (twenty three kilogramme) and weight of frame 15 kgs (fifteen kilogramme) RCC top slab with 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size), foundation concrete 1:5:10 (one cement : five sand : ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) inside plastering 15mm (fifteen millimeter) thick with cement mortar 1:3 (one cement isto three sand) finished smooth with floating coat of neat cement on walls and bed concrete, inside dimensions 455x610x450mm (four hundred fifty five into six hundred ten into four hundred fifty millimeters) deep single pipe line complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing ISI marked 110x90mm (One hundred ten millimeters into ninety milimeters) P.V.C floor trap of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetara complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing ISI marked, 100mm (One hundred millimeters) diameter sand cast iron grating for gully, floor or Nahni trap complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and fixing ISI marked PVC cowl 100mm (one hundred millimeters) nominal diameter complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement isto four sand isto eight graded stone aggregate 40mm (Forty millimetre) nominal size bedding for PVC stone ware pipe of internal diameters necessary form work and curing complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Malkhana, Royality, Octroi, toll tax, Sale Tax, GST or any taxes imposed by the Government. 100mm (one hundred millimeters) nominal diameter

Pawan Kumar

Narsh Kumar Dogra

Lovish Bhardwaj

ROHIT KUMAR

rupinder Singh