GE/SMB/T-39/20-21

Amount

(Steel Furniture) Rack 3 Tire Steel

Welding fitting of old existing shelves size 65''X24''X33'' inches with screws of all three shelves including four legs, complete all as specified and shown on drawing.

Preparation of all frame painting with OG paint, complete all as specified and shown on drawing.

Composite Office Table with Pre-laminated veneered Particle board top size 1350x750x750mm

Replacement of unserviceable/ broken/ damaged old top of table office clerk steel with new top made of pre-laminated particle board, one side teak faced exterior and one side balancing white, grade BWR, 18mm thick including PVC beading all around the top, complete all as specified and shown in drawing. Make: Kit ply/ National/ Bhutan/ Nova pan.

Replacement of unserviceable/ broken/ damaged old drawer of Table office clerk steel with new drawer made out of 1.0mm plane galvanised iron sheet, complete all as specified and shown on drawing.

Adjustment to existing drawer for easy functioning including denting/ welding and repairing to bottom channel for drawer, complete all as specified and as directed.

Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm Square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing.

Replacement of unserviceable/ broken/ damaged rubber shoes from legs of Table office clerk steel with new rubber shoes of best quality matching with the existing shoes, complete all as specified and as directed.

Preparation of the existing, decorated/ undecorated surfaces of Table office clerk steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed.

Composite Office Table with Pre-laminated veneered Particle board top size 1500x900x750mm

Replacement of unserviceable/ broken/ damaged old top of table office officer steel with new top made of pre-laminated particle board, one side teak faced exterior and one side balancing white, grade BWR, 18mm thick including PVC beading all around the top, complete all as specified and shown in drawing and as directed. Make: Kit ply/ National/ Bhutan/ Nova pan.

Replacement of unserviceable/ broken/ damaged old drawer of Table office officer steel with new drawer made out of 1.0mm plane mild steel plain black sheet, complete all as specified and shown on drawing.

Adjustment to existing drawer for easy functioning including denting/ welding and repairing to bottom channel for drawer, complete all as specified and as directed.

Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm square mild steel pipe, 1.6mm thick including cutting and welding, complete all as specified and shown on drawing.

Replacement of unserviceable/ broken/ damaged rubber shoes from legs of Table office officer steel with new rubber shoes of best quality matching with the existing shoes, complete all as specified and as directed.

Preparation of the existing, decorated/ undecorated surfaces of Table office officer steel and spray painting with two coats of synthetic enamel OG paint of approved quality, complete all as specified and directed.

REPAIR TO CHAIR WRTITING WITH COUSHION (Steel)

Replacement of unserviceable/ broken/ damaged old seat and back seat made with foam cousion including cloth with new seat and back seat made with foam cousion including cloth , size 32mm and support with ms flat, complete all as specified and shown in drawing.

Replacement of old unserviceable/ broken/ damaged round conduit pipe base with new round conduit pipe base including welding, complete all as specified and shown on drawing.

Replacement of old unserviceable/ broken/ damaged existing arms with new arms, made of Ist class hard wood sheesham wood, well seasoned free from knots, complete all as specified and shown in the drawings.

Preparation of all frame welded and painting with black paint, complete all as specified and shown on drawing.

Metal Shalving Cabnet Size 1280 x 760 x 430 mm (Almirah med steel with shelves

Replacement of old existing broken/ unserviceable locks of any description and in any position with new locks with double keys, fixing with suitable screws/ nuts including repair of locking device, complete all as specified and shown in the drawings. Make :Harrison / Godrej / Link

Replacement of old existing broken/ unserviceable door handles of Almirah, size 100 mm long, mild steel chromium plated of approved make, ISI marked, best quality, complete with nuts and pins, complete all as specified and shown in the drawings.

Replacement of old unserviceable/ broken/ damaged existing hooks from almirah with new hook of best quality, fixed in vertical channel below of each shelves at equal space, complete all as specified and shown in the drawings.

Replacement of old unserviceable/ broken/ damaged shelves with new shelves made out of 1.0mm plain black sheet, complete all as specified and shown on drawing.

Replacement of old unserviceable/ broken/ damaged legs with new legs made out of 1.0mm plain black sheet, complete all as specified and shown on drawing including welding of legs.

Replacement of old unserviceable/ broken/ damaged hinges from shutters with new hinges, complete all as specified and as directed.

Replacement of old existing broken/ unserviceable locking devices of any description and in any position with new locking devices, three ways, fixing with suitable screws/ nuts complete all as specified and shown in the drawings.

Preparation of the existing decorated surfaces of the steel Almirah with shelves by removing of all dents and filling with putty and spray painting with two coats of synthetic enamel OG paint of approved quality on internal and external surface, complete all as specified and directed.

Chair CB Steel Padded

Replacement of unserviceable/ broken/ damaged old seat and back seat made with foam cousion including cloth with new seat and back seat made with foam cousion including cloth , size 32mm and support with ms flat, complete all as specified and shown in drawing.

Replacement of old unserviceable/ broken/ damaged round conduit pipe base with new round conduit pipe base including welding, complete all as specified and shown on drawing.

Preparation of all frame welded and painting with black paint, complete all as specified and shown on drawing.

Rack Steel 65''x24''x33''

Welding fitting of old existing shelves size 65''x24''x33'' with scrows of all three shelves including four legs, complete all as specified and shown on drawing.

Preparation of all frame painting with black paint, complete all as specified and shown on drawing.

Rack 6 tire Steel

Welding fitting of old existing shelves size 65''x24''x33' with scrows of all three shelves including four legs, complete all as specified and shown on drawing.

Preparation of all frame painting with black paint, complete all as specified and shown on drawing.

Rack Steel 50''x26''x66''

Welding fitting of old existing shelves size 50''x26''x66'' with scrows of all three shelves including four legs, complete all as specified and shown on drawing.

Preparation of all frame painting with black paint, complete all as specified and shown on drawing.

CONVERSION OF GI CHARPOY NEWAR TO GI CHAROPY PLY TOP

Conversion of GI Charpoy newar to plywood top GI Charpoy by welding two stiffeners(parallel) to short rails)each of medium grade 25mm bore GI tubing duly supported with MS flat of size 70x25x4mm including drilling/welding and providing 12mm thick commercial plywood (BWR)grade) fixed with nut,bolts &washer of appropriate size and taking out existing nylon newar and tightening of frame,etc complete all as specified and shown on drawings.Make : Green ply/Century/Kitply

Taking out existing one broken long rail of charpoy and fixing new long rail made out of 32mm bore medium grade GI tubing both ends threaded etc complete all specified, and shown on drawings. Make : Surya prakash/Jindal/TATA

Forming two short rails out of one unserviceable long rail retrieved from item No 1 including cutting and threading both ends and fixing into existing charpoy frame including taking out unserviceable short rails etc complete all as specified, and shown on drawings.

Forming two legs out of one unserviceable short rail retrieved from item No 2 including cutting and threading both ends and providing 32mm bore GI cap plugs and fixing into existing charpoy frame including taking out two unserviceable legs etc complete all as specified, and shown on drawings.

32mm bore , 65mm long GI three way elbow fixed in repair to charpoy including taking out unserviceable elbow etc complete all as specified,and shown on drawings.

32mm bore , GI check nut including taking out unserviceable check nut etc complete all as specified,and shown on drawings.

Form with back (FD-78)

Replacement of unserviceable/ broken/ damaged old top with new top made of sheesham wood, first class, seasoned, hardwood, size 1800x255x25mm, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

Replacement of unserviceable/ broken/ damaged old back with new back made of sheesham wood, first class, seasoned, hardwood, size 1800x200x25mm, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged legs, top long rails, top short rails, top stiffener and bottom stiffener with new legs, top long rails, top short rails, top stiffener and bottom stiffener, made out of 25mm steel angle including cutting and welding, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Preparation of old painted surfaces of form with back and apply two coats of synthetic enamel black paint, complete all as specified and shown in drawing and as directed by Engineer-In-Charge.

Preparation of old top wooden surfaces of form without back and polishing to surfaces with French polish, complete all as specified and as directed by Engineer-In-Charge.

Chair School W/Hand Board

Replacement of unserviceable/ broken/ damaged old plastic seat with new plastic seat with screw tight, complete all as specified and shown in drawing.

Replacement of unserviceable/broken/damaged hand rest with new hand rest made of partical board for various members indicated on drawing shall be one side pre-laminated, exterior grade with melamine faced veneers on one side and complete all as specified and shown in drawing.

Replacement of old unserviceable/ broken/ damaged round conduit pipe base with new round conduit pipe base size 25mm and 20mm including welding, complete all as specified and shown on drawing.

Preparation of all frame welded and painting with black paint, complete all as specified and shown on drawing.

(Wooden Furniture ) Rack Record of size 6'x2'x6'

Replacement of old unserviceable/ broken/ damaged planks size 1800 x 200 x 25 mm thick of three shelves with fitted hard wood planks with new planks size1800 x 200 x 25 mm thick of three shelves with fitted hard wood planks, complete all as specified and shown on drawing and as directed by Engineer-In-Charge

Replacement of old unserviceable/ broken/ damaged existing legs with new legs Ist class hard wood sheesham wood, complete all as specified and shown on drawing and as directed by Engineer-In-Charge

Preparation to wooden surfaces of Rack Record and polishing with french polish at wooden portion exposed to direct vision, complete all as specified and directed.

REPAIR TO SIDE BOARD (FD-241).

Replacement of old unserviceable/ broken/ damaged top form side board with new top made of 18/19mm thick particle board prelaminated, exterior grade, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged left side form side board with new left side made of 18/19mm thick particle board prelaminated, exterior grade, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged shutters form side board with new shutters made of 18/19mm thick particle board prelaminated, exterior grade including brass locks with locking assembly, piano hinges, anodized copper plated knob and required fittings i.e. nuts/ bolts/ screws, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged bottom form side board with new bottom made of 18/19mm thick particle board commercial type, BWR, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged inside shelves/ partition form side board with new shelves/ partition made of 18/19mm thick block board commercial type, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged back plywood form side board with new back plywood, 6mm thick, commercial type, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged drawer form side board with new drawer made of deodar wood except bottom and front face, bottom shall be made of plywood 6mm thick, commercial type, front face of drawer shall be made of prelaminated particle board, 18/19 mm, teak face including anodized copper plated knob, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing legs with new legs Ist class hard wood sheesham wood, well seasoned free from knots, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Preparation to wooden surfaces of side board and polishing with french polish, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO TEAPOY (FD-34 and FD-232).

Replacement of old unserviceable/ broken/ damaged top form teapoy with new top made of 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing legs with new legs Ist class hard wood sheesham wood, well seasoned free from knots, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing top long rail with new top long rail, Ist class hard wood sheesham wood, well seasoned free from knots complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing top short rail with new top short rail, made of sheesham wood, seasoned, hard wood, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing stiffener with new stiffener Ist class hard wood sheesham wood, well seasoned free from knots, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Preparation to wooden surfaces of teapoy and polishing with french polish at wooden portion exposed to direct vision, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO TABLE DRESSING LADIES (FD-230 & FD-379).

Replacement of old unserviceable/ broken/ damaged top form table dressing ladies with new top made of 18/19mm thick particle board prelaminated, exterior grade, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged bottom form table dressing ladies with new bottom made of 18/19mm thick particle board commercial type, BWR, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing legs with new legsIst class hard wood sheesham wood, well seasoned free from knots, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged drawer form table dressing ladies with new drawer made of deodar wood except bottom and front face, bottom shall be made of plywood 6mm thick, commercial type, front face of drawer shall be made of prelaminated particle board, 18/19 mm, teak face including anodized copper plated knob, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged mirror and wooden frame with new mirror, 5mm thick, electro-copper plated and wooden frame , complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged aluminium channel with aluminium channel, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged back plywood form table dressing ladies with new back plywood, 12mm thick, commercial type, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Preparation to wooden surfaces of table dressing ladies and polishing with french polish, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO TABLE DRESSING GENTS (FD-230 & FD-379).

Replacement of old unserviceable/ broken/ damaged top form table dressing gents with new top made of 18/19mm thick particle board prelaminated, exterior grade, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged left/ right sides form table dressing gents with new damaged left/ right sides made of 18/19mm thick particle board prelaminated, exterior grade, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged bottom form table dressing gents with new bottom made of 18/19mm thick particle board commercial type, BWR, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged mirror and wooden frame with new mirror, 5mm thick, electro-copper plated and wooden frame , complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged drawer form table dressing gents with new drawer made of deodar wood except bottom and front face, bottom shall be made of plywood 6mm thick, commercial type, front face of drawer shall be made of prelaminated particle board, 18/19 mm, teak face including anodized copper plated knob, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged back plywood form table dressing gents with new back plywood, 12mm thick, commercial type, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Preparation to wooden surfaces of table dressing gents and polishing with french polish, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO PEG TABLE (FD-236 and FD-277).

Replacement of old unserviceable/ broken/ damaged top form peg table with new top made of 18/19mm thick particle board prelaminated, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing legs with new legs made of sheesham wood, first class, seasoned, hardwood, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing top long rail with new top long rail, made of sheesham wood, seasoned, hard wood, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing top short rail with new top short rail, made of sheesham wood, seasoned, hard wood, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged existing stiffener with new stiffener made of sheesham wood, first class, seasoned, hardwood, complete all as specified and shown in the drawings and as directed by Engineer-In-Charge.

Preparation to wooden surfaces of peg table and polishing with french polish at wooden portion exposed to direct vision, complete all as specified and as directed by Engineer-In-Charge.

TRESTLE STORE ROOM

Replacement of old unserviceable/ broken/ damaged long rail with new long rail made of 1st class hard wood sheesham wood of size, shape and length as shown on drawing completed all as specified and directed by the Engineer-in-Charge.

Replacement of old unserviceable/ broken/ damaged Short rail with new Short rail made of 1st class hard wood sheesham wood of size, shape and length as shown on drawing completed all as specified and directed by the Engineer-in-Charge.

Replacement of old unserviceable/ broken/ damaged centre rail with new centre rail made of 1st class hard wood sheesham wood of size, shape and length as shown on drawing completed all as specified and directed by the Engineer-in-Charge.

Replacement of old unserviceable/ broken/ damaged legs with new legs made of 1st class hard wood sheesham wood of size, shape and length as shown on drawing completed all as specified and directed by the Engineer-in-Charge.

Replacement of old unserviceable/ broken/ damaged PGI Sheet 22 gauge on trestle wooden with PGI Sheet 22 gauge on trestle wooden as shown on drawing completed all as specified and directed by the Engineer-in-Charge.

Preservative of trestle store room wooden with creaosote oil and used engine oil mixed raito 50:50 complete all as specified and directed by the Engineer-in-Charge

REPAIR TO TABLE BED SIDE MAP. FD/E6/MAP/15 (R)

Replacement of old unserviceable/ broken/ damaged top form table bed side with new top made of partical board for various members indicated on drawing shall be one side pre-laminated, exterior grade with melamine faced veneers on one side and complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Replacement of old unserviceable/ broken/ damaged left/ right/back sides table bed side with new damaged left/ right sides made of partical board for various members indicated on drawing shall be one side pre-laminated, exterior grade with melamine faced veneers on one side and complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

MS pipe for various parts of table bedside shall be 18G (1.25mm) thick. External dimension as shown in drawings.

Replacement of old unserviceable/ broken/ damaged inside shelves/ drawer of table bed side with new shelves/ drawer made of partical board, complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Preparation to wooden surfaces of table bed side and polishing with french polish at wooden portion exposed to direct vision, complete all as specified and as directed by Engineer-In-Charge.

REPAIR TO TABLE WRITING MAP

Replacement of old unserviceable/ broken/ damaged back side with new back side with ply board 12mm of size 5 1/2ft x 4 ft, exterior grade, duly covered with 4mm thick teak wood beading all around, complete all as specified and shown in the drawings.

Replacement of old unserviceable/ broken/ damaged left right side with new left right side made of ply board 12mm of size 5 1/2ft x 1 1/2ft , complete all as specified and shown in the drawings.

Replacement of old unserviceable/ broken/ damaged old shelves made of 18mm ply board of size 4ft x 1ft with new shelves made of 18mm ply board of size 4ft x 1ft including 4mm thick teak wood beading all around, complete all as specified and shown in the drawings.

Replacement of old unserviceable/ broken/ damaged existing cupboard made with 12mm playboard of size 2ft x 1 1/2ft including steel chain on both left and right side with new existing cupboard made with 12mm playboard of size 2ft x 1 1/2ft including steel chain on both left and right side, complete all as specified and shown in the drawings.

Preparation to wooden surfaces of table writing map and polishing with french polish at wooden portion exposed to direct vision, complete all as specified and directed.

PARGAL CONSTRUCTION CO