J&K

To Be Opened

Works

Electrical Works

Installation of High mast lights at Devipora Anantnag

Public Works Department

DEVPORA ANANTNAG | Anantnag, Jammu And Kashmir

Amount: ₹2.4 LCloses: 7 Apr 2026Closed

Timeline

Published1 Apr 2026
Closed7 Apr 2026
Bid Opening8 Apr 2026

Tender Value

₹2.4 L

EMD Value

₹4,730

Closing Date

7 Apr 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

EXECUTIVE ENGINEER RNB ELECTRIC DIVISION KASHMIR

Address

ENGINEERING COMPLEX RAJBAGH NEAR SILK FACTORY SRINAGAR

Work Description

Installation of High mast lights at Devipora Anantnag

Tender Information

Tender ID

2026_PWDJK_307097_1

Reference Number

NIT No.332/2025-26 Dt/31/03/2026

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Period of Work

8 days

Location

DEVPORA ANANTNAG

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

4 documents required · 4 mandatory

Fee/PreQual/Technical/Finance

RequiredAll the documents as per NIT Clause 2.1a to 2.1d (.pdf)

RequiredScanned copy of TR as per NIT Clause 2.1e (.pdf)

RequiredScanned copy of EMD as per NIT Clause 2.1f (.pdf)

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹200

Tender Fee Payable To

EXECUTIVE ENGINEER RNB ELECTRIC DIVISION KASHMIR

EMD Fee Amount

₹4,730

Important Dates

Last Activity

1 Apr 2026

Published

1 Apr 2026

Bid Opening

8 Apr 2026

Download Starts

1 Apr 2026

Download Ends

7 Apr 2026

Submission Starts

1 Apr 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (12 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
-	Supply and erection of Mild Steel Swaged Tubular Pole confirming to IS: 2713-1980 ( Part I-II) with base plate. The pole shall be made from steel tube and pipe (IS : 1141, Fe 410)including excavation of the pit and filling up the same with cement concrete of M15 Grade (1:2:4 mix) from base plate to 50 cm above ground level, earthing terminal, cable entry with 32mm dia B- class GI cable sleeves. The pole shall be painted with 2 coats of red oxide primer and 2 coats of enamel paint of silver. The job also includes the cost of form work and carriage of all required materials. (9 mtr. 410 SP-28)	3	No.	-	-
-	Providing and fixing of detachable type round or square bracket (suitable for 4 lights) of 35-40 mm dia. GI pipe as per requirement.	3	No.	-	-
-	Supply, laying, connecting and commissioning of 10 sq. mm 2 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable , incl. cost of required al. thimbles duly crimped.	150	mtr.	-	-
-	Providing & Fixing of IKO8 IP-66 protected high power LED flood light system with single piece Pressure die cast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700k. Manufactures Word Mark/Name Engraved/Embossing/ Screen printing on die cast housing to allow traceability/ authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from.OEM shall be submitted. (100Watt ) (Havells/ Philips)	12	No.	-	-
-	Supplying and drawing FRLS PVC insulated copper conductor single core cable through pole up to light. A. 2 x 2.5 sq. mm (P + N)	108	mtr.	-	-
-	B. 1 x 2.5 sq. mm (Loop/ Common earth)	40	mtr.	-	-
-	Providing and fixing/ laying of earthing station by way of placing GI electrode rod in a pit connected through GI strip. (complete job)	3	No.	-	-
-	Providing and fixing of sheet steel enclosure box ( suitable size for housing of voltage stabilizer , 40A DP MCB 01 no, 5-32A SP MCBs 2 nos. and a suitable connector) with knock out for cable entry / out including fixing with nut bolt fastener etc required and to be fixed on the pole at a height of at least 8 feet from ground level.	3	No.	-	-
-	Supply, installation, testing and commissioning of 40 A DP rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the enclosure box complete with necessary connections.	3	No.	-	-
-	Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the enclosure box complete with necessary connections.	6	No.	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.83 MB

Work Item Documents

BOQ_996546.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Supply and erection of Mild Steel Swaged Tubular Pole confirming to IS: 2713-1980 ( Part I-II) with base plate. The pole shall be made from steel tube and pipe (IS : 1141, Fe 410)including excavation of the pit and filling up the same with cement concrete of M15 Grade (1:2:4 mix) from base plate to 50 cm above ground level, earthing terminal, cable entry with 32mm dia B- class GI cable sleeves. The pole shall be painted with 2 coats of red oxide primer and 2 coats of enamel paint of silver. The job also includes the cost of form work and carriage of all required materials. (9 mtr. 410 SP-28)

No.

Providing and fixing of detachable type round or square bracket (suitable for 4 lights) of 35-40 mm dia. GI pipe as per requirement.

No.

Supply, laying, connecting and commissioning of 10 sq. mm 2 core PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade Aluminum LT cable , incl. cost of required al. thimbles duly crimped.

150

mtr.

Providing & Fixing of IKO8 IP-66 protected high power LED flood light system with single piece Pressure die cast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to 5 watt each. System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700k. Manufactures Word Mark/Name Engraved/Embossing/ Screen printing on die cast housing to allow traceability/ authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from.OEM shall be submitted. (100Watt ) (Havells/ Philips)

No.

Supplying and drawing FRLS PVC insulated copper conductor single core cable through pole up to light. A. 2 x 2.5 sq. mm (P + N)

108

mtr.

B. 1 x 2.5 sq. mm (Loop/ Common earth)

mtr.

Providing and fixing/ laying of earthing station by way of placing GI electrode rod in a pit connected through GI strip. (complete job)

No.

Providing and fixing of sheet steel enclosure box ( suitable size for housing of voltage stabilizer , 40A DP MCB 01 no, 5-32A SP MCBs 2 nos. and a suitable connector) with knock out for cable entry / out including fixing with nut bolt fastener etc required and to be fixed on the pole at a height of at least 8 feet from ground level.

No.

Supply, installation, testing and commissioning of 40 A DP rating 240V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the enclosure box complete with necessary connections.

No.

Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB of Legrand/ Havells/ L&T suitable for inductive load in the enclosure box complete with necessary connections.

No.