PROVISION OF SPORTS COMPLEX AND SWIMMING POOL AT NSTL VISAKHAPATNAM

Amount

Schedule 'A' Part - I (BUILDINGS AND STRUCTURES) This Schedule (contains under mentioned Sl. item No. 1.01 and 1.02) is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6.

Lumpsum price worked out by the contractor for "Construction of block of Sports Complex comprising of Gymnasium and Badminton Court" complete all as shown on drawings and as specified.

Lumpsum price worked out by the contractor for "Construction of block of Swimming Pool consisting of Swimming pool, Plant room, change room area with entrace hall, balancing tank including swimming pool tiling, water proofing treatment to swimming pool & balancing tank, side walk, compound wall (Around Swimming Pool & Balancing Tank all as shown in drawing No. WD/VSP/88-02/2020, Sheet No. 1/8 & 6R/8 and drawing No. SMITCONE/CE/R&D/S-01/2020 sHEET nO. 14/15), surface drain, ramp and connected / related items" complete all as shown on drawings and as specified. NOTE:- Bath, EWC, dressing area shall be of PVC partition as per details shown in drawing No. WD/VSP/88-02/2020, Sheet No. 4/8.

Lump sum price worked out by the Contractor for "EXCAVATION, EARTHWORK, DEMOLITION AND SITE CLEARANCE” as listed in Schedule ‘A’ Part - II representing ___________ % ________________ percent Above / Below the lumpsum price of `13,90,238.21, inserted by the MES in Schedule ‘A’ Part - II

Lump sum price worked out by the Contractor for “ROAD / PATH / CULVERT” as listed in Schedule ‘A’ Part - III representing _______ % ______________ percent Above / Below the lump sum price of `21,46,958.62 inserted by the MES in Schedule ‘A’ Part - III

Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL” as listed in Schedule ‘A’ Part - IV representing __________ % ____________ percent Above / Below the lump sum price of `1,71,519.30 inserted by the MES in Schedule ‘A’ Part - IV

Lump sum price worked out by the Contractor for “AREA DRAINAGE” as listed in Schedule ‘A’ Part - V representing __________ % ____________ percent Above / Below the lump sum price of `10,34,134.90 inserted by the MES in Schedule ‘A’ Part - V

Lump sum price worked out by the Contractor for "COMPOUND WALL / CHAINLINK FENCING / GATE” as listed in Schedule ‘A’ Part - VI representing _______ % __________________ percent Above / Below the lump sum price of `27,39,289.90 inserted by the MES in Schedule ‘A’ Part - VI

Lump sum price worked out by the Contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - VII representing _______ % _________________ percent Above / Below the lump sum price of `31,961.50 inserted by the MES in Schedule ‘A’ Part - VII

Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATIOIN” as listed in Schedule ‘A’ Part - VIII representing ______ % _________________ percent Above / Below the lump sum price of `60,041.00 inserted by the MES in Schedule ‘A’ Part - VIII

Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part - IX representing ______ % _________________ percent Above / Below the lump sum price of `1,42,790.80 inserted by the MES in Schedule ‘A’ Part - IX

Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part - X representing ______ % _________________ percent Above / Below the lump sum price of `9,56,682.20 inserted by the MES in Schedule ‘A’ Part - X

Total amount of PROVISIONAL SUM of `5,00,000.00 in respect of following items: (a) Tennis Court NOTE:- Multilayer cushioned Synthetic Acrylic surface of tennins court shall be measured and paid under respective items of BOQ. (b) Practice wall and PCC hardstanding

Schedule 'A' Part - XI This Schedule is not prepriced by MES and the prepriced rate indicated in Col - 5 as `0.00 indicates this fact only.The tenderer is required to quote their rates in Column 6. This Schedule constitutes Sl. Item No. 12.01 to 12.73

Double wall corugated (DWC) HDPE pipe, 150mm internal diametre, laid in trenches and jointed with and including provision of collars, complete all as specified and directed.

Pre-cast SFRC manhole covers with and including provision of frame conforming to IS 12592, of size 600mm x 750mm, MD 10 grade, complete all as specified and directed.

Preparation of surfaces of walls incuding pilasters, cornices etc.,including removing existing loose particles etc., and applying two coats of weather-proof antifungal exterior emulsion paint over a self coat of primer, over two coats of external grade wall care putty (the total thickness shall not be less than 1.50mm), finished even and smooth, complete all as specified and directed.

PVC coated GI chain link mesh 40mm x 40mm, 4mm thick (including PVC coating), complete all as specified and directed.

Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn through and including provision of 20mm dia rigid PVC conduit medium grade ISI marked and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc, by means of saddles and clips etc, including provision of modular metal flush boxes (metal switch board of any type and size with GI metal box) with modular metal frame plate and white cover for housing switches, sockets, regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for one light point controlled by one 6 amps one way modular switch, complete all as specified and directed. NOTE: (i) The quoted rate shall deemed to include the cost of metal flush boxes, modular white cover plate, provision of blank plates as per requirement etc.

All as per Sl. Item No. 12.05 here-in-before, but for ceiling fan / exhaust fan point controlled one number one-way switch

All as per Sl. Item No. 12.05 here-in-before, but for one switch socket outlet point 5Amp on independent board

All as per Sl. Item No. 12.05 here-in-before, but for one switch socket outlet point 5Amp on same board

Point wiring complete with 2.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn through and including provision of 20mm dia rigid PVC conduit medium grade ISI marked and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc, by means of saddles and clips etc, including provision of modular metal flush boxes (metal switch board of any type and size with GI metal box) with modular metal frame plate and white cover for housing switches, sockets, regulators etc., including 2.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for one switch socket outlet point 15Amp on independent board, complete all as specified and directed. NOTE: (i) The quoted rate shall deemed to include the cost of metal flush boxes, modular white cover plate, provision of blank plates as per requirement etc.

Sub main wiring complete with two runs of of single core, 2.5 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of concealed non-metallic rigid PVC conduit of size not less than 25mm dia and its accessories and connecting terminal ends to DB's including providing one run of 2.5 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) Two runs of 2.5 sq.mm copper conductor, one run of 2.5 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sheet steel powder coated distribution board vertical type TPN 8 ways, 415 Volts, with 250 Amps rated fully insulated copper bus bar for each phase, 2 shrouded neutral bars, 2 earth bars, IP 43 protection and double door, with provision for FP MCCB as incommer and SP / TP MCBs as outgoing complete all as specified and directed. MAKE:- Cat No. 5077 47 of Legrand or equivalent in Schneider / L&T.

MCB DB TPN 4 way metallic Double door IP 54 protection, 415 V AC 50Hz with for MCBs Four Pole as incomer and Double Pole / Single Pole MCBs as out going with tinned copper bus bar of rated 250Amp neutral link earth link, complete all as specified and directed. MAKE:- Cat No-DSSDBX0220 of HAVELLS or techno-commercially equivalent model in SIEMENS / LEGRAND / C&S

MCB DB SPN 12 way metallic Double door IP 54 protection, 240 V AC 50Hz with for MCBs double pole as incomer and Double Pole / Single Pole MCBs as out going with tinned copper bus bar of rated 200Amp neutral link earth link, complete all as specified and directed. MAKE:- Cat No-DSSDBX0182 of HAVELLS or techno-commercially equivalent model in SIEMENS / LEGRAND / C&S

MCB DB SPN 8 way metallic Double door IP 54 protection, 240 V AC 50Hz with for MCBs double pole as incomer and Double Pole / Single Pole MCBs as out going with tinned copper bus bar of rated 200Amp neutral link earth link, complete all as specified and directed. MAKE:- Cat No-DSSDBX0181 of HAVELLS or techno-commercially equivalent model in SIEMENS / LEGRAND / C&S

Supply, install and testing of static energy meter of capacity 60 Amp suitable to measure KWH, AC three phase, accuracy class1.0, 3 x 240 Volt,50Hz with back lite LCD display with transparent high hinged box, complete all as specified and directed. MAKE:- Cat No-Cat part No-TPPL1510000002OCNO of HPL or techno-commercially equivalent model in L&T / SECURE

Sub main wiring complete with two runs of of single core, 10 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of concealed non-metallic rigid PVC conduit of size not less than 25mm dia and its accessories and connecting terminal ends to DB's including providing one run of 10 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) Two runs of 10 sq.mm copper conductor, one run of 10 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with two runs of of single core, 16 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of concealed non-metallic rigid PVC conduit of size not less than 32mm dia and its accessories and connecting terminal ends to DB's including providing one run of 16 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) Two runs of 16 sq.mm copper conductor, one run of 16 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

MCCB 4 pole 415V, 160 Amps, 50 Hz with thermal magnetic release and Ics=100%Icu with rupturing capacity 25 KA, adjustable overload min 70-100%, complete all as specified and directed. MAKE:- ABB (T-Max) / Siemens(3VT) / L&T(D-Sine) / Legrand(DPX)

MCB SPN 240V, 80 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity, complete all as specified and directed. MAKE:- Cat No. DHMJCDPF080 of HAVELLS or techno-commercially equivalent model in SIEMENS / LEGRAND / C&S

MCB SPN 240V, 63 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity, complete all as specified and directed. MAKE:- Cat No. DHMGCSNF063 of HAVELLS or techno-commercially equivalent model in SIEMENS / LEGRAND / C&S

MCB SP 240V, 32 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity, complete all as specified and directed. MAKE:- Cat No. DHMGCSPF006-032 of HAVELLS or techno-commercially equivalent model in SIEMENS / LEGRAND / C&S

MCB SP 240V, 20 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity, complete all as specified and directed. MAKE:- Cat No. DHMGCSPF006-032 of HAVELLS or techno-commercially equivalent model in SIEMENS / LEGRAND / C&S

MCB SP 240V, 16 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity, complete all as specified and directed. MAKE:- Cat No. DHMGCSPF006-032 of HAVELLS or techno-commercially equivalent model in SIEMENS / LEGRAND / C&S

MCB SP 240V, 10 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity, complete all as specified and directed. MAKE:- Cat No. DHMGCSPF006-032 of HAVELLS or techno-commercially equivalent model in SIEMENS / LEGRAND / C&S

MCB SP 240V, 6 Amp, 50 Hz, 'C' curve, 10 KA breaking capacity, complete all as specified and directed. MAKE:- Cat No. DHMGCSPF006-032 of HAVELLS or techno-commercially equivalent model in SIEMENS / LEGRAND / C&S

LED surface & wall mounted batten, 4 feet, LED luminaires, 20 W, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparallelled light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50 degree Celsius, CRI > 80, class-1, SDCM < 5, Driver efficiency > 85%, Power factor > 0.95, THD < 10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level < 60V DC as per IS-10322 / IEC-60598 standard, IP20 protected, 50000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5sq.mm copper conductor for connection, complete all as specified and directed. MAKE:- Cat No. ENDURALINEARNEOBS20WLED840SPCWH of Havells or Cat No. LHEYAFP79G1W020 of PHILIPS techno-commercially equivalent model in Wipro / Bajaj / CG

LED surface & wall mounted light fitting, 2 feet, LED batten luminaires, 10 W, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparalled light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50 degree Celsium, CRI > 80, class-1, SDCM < 5, Driver efficiency > 85%, Power factor > 0.95, THD < 10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3KV in CM, Safety Extra Low Voltage Safe level < 60V DC as per IS-10322 / IEC-60598 standard, IP20 protected, 50000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy > 100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 sq.mm copper conductor for connection, complete all as specified and directed. MAKE:- Cat No-ENDURALINEARNEOBS10WLED865SPCWH of Havells / Cat No. LHEYAFP7PG1W010 of Philips or techno-commercially equivalent model in Wipro / Bajaj / CG

High efficient LED security light fitting, 45 W, Aluminium pressure Die cast housing parts for longlife, Pure polyester powder coated Dark Gray housing, High purity PMMA lenses for superior performance, Toughened glass with silicon gaskets for IP65 protection, Driver cover designed to suit top maintenance, Suitable for external pole dia.Up to 50 mm, Power factor>0.95, Lumianire lumen output- 6440 lm, CCCV driver with Voltage range 150-270V AC, Temperature range- 0 to 50 degree Centigrade, Driver efficiency > 85%, Power factor > 0.95, THD<10%, CRI >70, Colour Temperature- 5700K, Surge protection from overvoltages- 4.0kV in CM, 50000 burning hours, Luminaire efficacy >92lm/W including supply and fixing three runs of of FRLS Copper conductor of size 1.5 Sq.mm single core with fixing accessories from junctioin box to light fitting including GI pipe light grade 40 mm, GI clamps, complete all as specified and directed.. MAKE:- Cat No BRTFG45WLEDWW of Bajar or techno-commercially equivalent model in WIPRO / CROMPTON / PHILIPS

LED luminaires, 120 Watts, with latest LED technology and efficient optics ensuring perfectly uniform illumination and unparallelleled light distribution high optically efficient serrated diffuser, Isolated Multistage CCCV driver with voltage range 150-270V AC, temperature range- 0 to 50 degree Centigrade, CRI >80, class-1, SDCM <5, Driver efficiency>85%, Power factor >0.95, THD<10%, Colour temperature-6500K, short circuit and over circuit protection, Surge protection- 3kV in CM, Safety Extra Low Voltage Safe level<60V DC as per IS-10322/IEC-60598 standard, IP 65 protected, 50000 burning hours, with 70% of its initial lumen maintained, Lumianire efficacy>100lm/W fixed complete including all accessories and provision of PVC sheathed 3 core 1.5 Sqmm copper conductor, complete all as specified and directed.. MAKE:- Cat No SAUCERNEOP120WLED75760DLTG of Havells or Cat No. LHELAQU71G6W120 of Philips or techno-commercially equivalent model in WIPRO / CROMPTON / Bajaj

Ceiling fan BEE 5 star rated complete 1200mm sweep, energy efficient suitable to function on 230V, single phase, AC supply, white colour, with down rod 300mm long, capacitor 2.5mF, canopies, nuts, bolts and washers and connecting with and including provision of 3 core 1.5 sq.mm PVC sheathed flexible copper conductor from ceiling, writing MES number 20mm height on ceiling fan motor complete all as specified and directed.

Heavy duty exhaust fan 300mm sweep 1400RPM, and blades with louvers and shutters without regulator suitable for 230V single phase AC supply with all fixing arrangments to fix on wall, including making holes on brick / stone walls and making good disturbed surfaces to match with the existing, including provision of 3-way PVC connector, copper bunched flexible three core 1.5sq.mm PVC insulated cable from connection point to fan, writing MES number 20mm height on exhaust fan motor, complete all as specified and directed MAKE:- Model: TURBO of Havells or techno-commercially equivalent model in any one of the makes specified in list of makes here-in-after.

Air Circulator wall mounted fans 230 volts single phase oscillating 400mm sweep suitable for wall mounting ,oscillation up to 90 degrees and metal body poweder coated complete with all fixing accessories on wall, including provision of 3-way PVC connector, copper bunched flexible three core 1.5sq.mm PVC insulated cable from connection point to fan, writing MES number 20mm height on fan motor, complete all as specified and directed

Earthing complete with GI earth plate electrode 600mm x 600mm x 6.3mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth strip 32mm x 6mm by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 50mm dia GI pipe 'medium grade', watering pipe 20mm dia GI pipe 'light grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover (1:2:4) mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- (a) Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. (b) Earth continuity conductor beyond 7.5metre shall be measured and paid under respective item of this Schedule.

Design, Supply, Installation, Testing and Commissioning of water Filtration cum recycle plant for Swimming Pool plus diving pool having total water capacity of 8,00,000 litre suitable for 7 hrs turn over period, flow rate -120 cu.m/hr complete with and including provision of the following, complete all as specified and directed. (a) Multi Grade Sand Filter- Vessel Dia -2800 mm , Vessel HOS -1875 mm, Filtration Flow Rate- 120cu.m/hr, Dish thickness -8mm, Shell Thickness-6 mm , Made of MS internal epoxy painted with collector arms and distributers made MS heavy duty pipe, frontal piping with 150 mm valve for filtration, backwash & rinse process. working pressure 2.5 Kg/sq.cm, desgn pressure-3.5 kg/sq.cm, Test Pressure 5.0 Kg/sq.cm,.Filter to be supplied with manhole, handhole, pressure gauge, inclusive of Multi Grade sand media -total 8950 kgs with media depth 915 mm confirm to IS-2062 suitable for 8,00,000 litre MAKE:- ION-EXCHANGE / DRA-TECH / M/s SATHYA SAI AQUAPURA SERVICES / M/s OPTIMUS ENVIROPRO PVT LTD NOTE:- (i) Treated water parameters of swimming pool shall be maintained as per HQ E-in-C technical Instruction No. T1 03/2010. (ii): All the consumable chemicals and materials shall be supplied by contractor for defect liability period and rates on this account shall deemed to be included in the unit rate quoted.

SL. ITEM NO. 12.34 CONTD… (i) Quartz Pebbles of 1" to 3/4" not less than 100 mm thick layer (ii) Quartz Pebbles of 3/4" to 1/2" not less than 100 mm thick layer (iii) Quartz Pebbles of 1/2" to 1/4" not less than 100 mm thick layer (iv) Quartz Pebbles of 1/4" to 1/10" not less than 100 mm thick layer (v) Quartz sand of assorted sizes not less than 900 mm thick layer. (vi) Back wash arragement shall be made to facilitate the back washing system (vii) Pressure gauges -02 Nos suitable rating (viii) Air vent system with 25 mm pipe with gun metal valve (ix) Pressure relief valve ,nut and bolt and gasket for filter (x) suitable size of manhole and hand hole.

Supply. Installation testing and commissioning of circulating Pumps 1450 RPM, Mechanical Seal in Stainless Steel IP-54 motor protection. Stainless steel AISI-420 shaft, Stainless steel AISI-316 strainer basket, Conn PN-16 according to DIN2501, Flowrate : 120 cu.m/hr at 30m head including electric motor of capacity 5 HP having operating Voltage 400V, 3 phase, 50Hz, vibtration pad delivery side including PCC foundation, complete all as specified and directed. NOTE:- 2 Nos working + 1 No stand by Make: - Kirloskar / ITT / Grundfos

Supply. Installation testing and commissioning of Alum Dosing & Soda ash dosing plant including electronic dosing pumps with fittings etc. including chemical compound material complete with 200 litre poly-urethane moulded tank and stirrer, complete all as specified and directed. Electrical : 230 V.A.C. 50 HZ Suction/Discharge Tubing : 4/6mm Material Of Construction :- Pump Head : 16metre Diaphragm : Glass filed Polyproplene with teflon Connectors Suction tubing : HDPE Discharge tubing : HDPE Flow :12 lph which shall be injected into pump delivery header Make: - Ion Exchange / Milton Roy / E-Dose

Supply, Install, test and commissioning of High pressure single head gear motorised adjustable high pressure up to 100PSI chlorine dosing pump for injecting Calcium Hypo Chlorine consisting of motor driven reciprocating chemical pump with output varying between 02US GPD to 40 US GPD operate on Phase AC system 230V, 50Hz with fractional HP complete with all the foliowing non-metallic accessories and parameters, complete all as specified and directed. (a) Lead tubing (b) Connecting nuts (c) Injection check valve (d) Clay weight (e) Ferrules Make :- DELLIBAL Technologies Pvt. Ltd / Grundfos / Optima Water Solutions / Unique Dosing Systems / Ion Exchange / Altoch

Supply only pH test set, Chlorine test set for swimming pool, complete all as specified and directed. Make: - Any ISI approved

Supply, Installation testing and commissioning of Trolley mounted Suction Sweeper with Pump of following accessories, complete all as specified and directed.: (i) Trolley mounted self priming suction pump of 2 HP capacity with rope and starter. (ii) Semi type Pool cleaner with trolley (iii) Automatic vacuum head in stainless steel material size 600mm X 900mm each fitted with nylon brush 9 mtr long telescopic type handle 20mm size and Vacuum hose pipe PVC branded transparent flexible pipe of 30 metre length and 4 core flexible cable with industrial plug along with deep bag net and curved brushes and other maintenance acessories like handle wih 06 Nos float valves complete and including PP rope & vacuum point with ABS material-10 Nos and Piping with 50mm grade ISI mark - 01 No (iv) Vacuum head 60mm size - 02 Nos (v) 100 feet length of Vacuum hose with cuffs and sun light resistance complete - 02 Nos. Make: - Ion Exchange/Thermax/Astral/Aquapac/Kripsol

Main Drain Arrangement made out of stainless steel frame of size 500 mm x 500 mm includind with nut bolts, PVC drain piping from deepest end of pool to the suction of pump with valves as per specifications, complete all as specified and directed.

Pool Piping inside pool floor for fixing inlet nozzles, Circulating pipes, UPVC piping from filter to shallow end of pool, complete all as specified and directed. Water distribution piping network shall consisting of the following :- (a) From Balancing tank to pump (b) From pump to filtration system (c) From Filtration plant to swimming pool and with necessary valves and accessories (d) From Swimming pool to balancing tank and System shall also include 50 Nos UPVC inlet nozzles inside the pool.

Ladder Overflow model stainless steel AISI-316 ladder, width 500mm, handrails dia 43mm, stainless steel non slip steps-3 & 4 and anchoring fixtures, complete all as specified and directed.

Life Buoy with SS Supports of size 400mm dia in orange hard plastic with rope and life buoys support, complete all as specified and directed.

Life Buoy holder made from aluminium, complies with EN 12145 for attaching to wall or rail including cuffs for attaching to rails, complete all as specified and directed.

Life guard loop made of Aluminium T which can be connected the telescopic handle, complete all as specified and directed.

Stainless Steel Hand Rail SS 304 Grade rail 40mm dia duly buffed and mirror polished alongwith supports, complete all as specified and directed.

ABS grating of size 300mm wide for overflow channel, complete all as specified and directed.

Floor inlet Pool Jets of 100 mm x 35mm size horizontal type, flow design and flow rate of 5000 litre per minute, adjustable type with end connection of 50 mm BSP for uniformity spreading of water and chemical along with the pool floor, complete all as specified and directed.

Valve chamber of internal dimension of 750mm x 750mm x 750mm with 200mm thick flyash brick masonry in CM 1:6 including necessary earth work and excavation in any type of strata, RFR and removal of surplus soil to a distance not exceeding 50metre, foundation in PCC 1:4:8 type D2 (using 40mm graded stone aggregate), internal and external platering 15mm thick and in CM 1:4, PCC 1:2:4 type B1 (20mm graded stone aggregate) coping 40mm thick including MS chamber cover with 3.15mm thick sheet fixed with angle iron frame 40mm x 40mm x 6mm duly fixed with split type old fasts 04 Nos and locking arrangements with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. NOTE:- Excavation & earth work in any strata, RFR and removal shall deemed to be included in the quoted rate.

Valve chamber of internal dimension of 600mm x 600mm x 900mm with 200mm thick flyash brick masonry in CM 1:6 including necessary earth work and excavation in any type of strata, RFR and removal of surplus soil to a distance not exceeding 50metre, foundation in PCC 1:4:8 type D2 (using 40mm graded stone aggregate), internal and external platering 15mm thick and in CM 1:4, PCC 1:2:4 type B1 (20mm graded stone aggregate) coping 40mm thick including MS chamber cover with 3.15mm thick sheet fixed with angle iron frame 40mm x 40mm x 6mm duly fixed with split type old fasts 04 Nos and locking arrangements with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. NOTE:- Excavation & earth work in any strata, RFR and removal shall deemed to be included in the quoted rate.

Algae brush 10" (10 inch) long with stainless steel bristle, complete all as specified and directed..

Algae brush, curved 18" (18 inch) long with nylon bristle, complete all as specified and directed..

Telescopic pole 4.8metre long extendable upto 9metre, made out of aluminium tubing, complete all as specified and directed..

Wiring with Submersible water proof electric cable, 3 runs of 2.5sq.mm, PVC insulated, Unsheathed, multistranded copper conductor cable, 1100 Volts, FRLS grade, ISI marked, drawing through and including heavy duty PVC conduit of suitable size with all accessories concealed for pool lighting system with and including provision of all fittings, Junction box etc., complete all as specified and directed.

Standard underwater light of IP-66 Protection,18 W niche in Polypropylene body and glass fiber with 3 metre length copper cable of 1.5 sq.mm in ABS rim including water proofing jointing connection and testing, complete all as specified and directed. MAKE:- Fortune Arrt or techno-commercially equivalent make as approved by AGE(I).

ABS plastic junction box, pole mounted or surface mounted, square type, with hinged door, of size 180mm x 180mm x 150mm (outside dimensions) for 3 phase & neutral comprising of aluminium bus bar 200 Amp capacity mounted on hygroscopic insulators, 01 No MCB SP 6 Amp, with locking arrangement, water proof covering and making all required electrical connections, complete all as specified and directed.

Supply, fixing, jointing, testing and commissioning of centrifugally cast ductile iron pipe line ISI marked IS No 8329:2000, laying under ground of nominal diameter (DN) 100 mm, class K-7, with internal cement mortar lining and external bitumen coating, socketed and spigot end, including ISI marked PUSH-ON JOINTS (Rubber ring) of EPDM material, confirming to MS 672:1999, as 1646 :1992,.suitalbe for DI pipe of 100 mm nominal diameterl etc., complete all as specified and directed. MAKE:- Electrosteel /TATA DUCTURAL / LANCO / SRI PIPES NOTE:- (i) DI pipe shall be laid below the ground level in standard or short lengths as per site requirement and as directed.

DI specials such as bends any type, radius and angle, tapers any type, (straight, bend, increasing, decreasing or double sockets etc) tee pipes, tail piece,single branch, Y junction, double branch cross etc as per IS, complete all as specified and directed.

Cutting in position existing 150 mm bore CI water mains and tapping in position for taking the branch connection of size 100 mm. supply and installation of suitable CI 'Tee' including all ends, suitable size of reducer, flanges complete as required as per site condition, run lead joints, rubber gaskets, nuts & bolts, washers etc., for tapping out branch connection including excavation and earth work in any type of strata, complete all as specified and directed.

Cutting in position existing 150mm bore CI water mains and tapping in position for taking the branch connection of size 80 mm. supply and installation of suitable CI 'Tee' including all ends, suitable size of reducer, flanges complete as required as per site condition, run lead joints, rubber gaskets, nuts & bolts, washers etc., for tapping out branch connection including excavation and earth work in any type of strata, complete all as specified and directed.

Cutting of existing bituminous road or PCC hardstanding upto 900mm deep and 250mm wide for laying of pipe line making good of the top surface upto 150mm depth and making good disturbed surfaces to match with the existing using PCC 1:2:4 type B1 (20mm graded stone aggregate), complete all as specified and directed. NOTE:- GI pipe light grade 80mm dia shall be measured and paid under respective item of this Schedule.

SL. ITEM NO. 12.63 CONTD... (a) MCCB 4 pole 415V, 200 Amps, 50 Hz with thermal magnetic release and Ics=100%Icu with rupturing capacity 36 KA, adjustable overload min 70-100% -1 No. (Incoming) (b) MCCB 4 pole 415V, 150 Amps, 50 Hz with thermal magnetic release and Ics=100%Icu with rupturing capacity 25 KA, adjustable overload min 70-100% -1 No.(Out going for filteration plant) (c) MCCB 4 pole 415V, 40 Amps, 50 Hz with thermal magnetic release and Ics=100%Icu with rupturing capacity 25 KA, adjustable overload min 70-100% -2 Nos.(Out going for ozonation plant) (d) MCCB 4 pole 415V, 25 Amps, 50 Hz with thermal magnetic release and Ics=100%Icu with rupturing capacity 16 KA, adjustable overload min 70-100% -1No (Alum & soda dosing palnt) (e) Panel mounted type digital multifunctional energy meter A, V, Z, KW, PF, CT operated, LT 3 phase, 4 wire, including ct ratio 250/5-01 No (f) LED Indicating lamps set RYB …. 01 set (g) Automatic DOL starter with over load, no load, single phasing suitable for 5 HP pump cum motor assembly, AC, 415V, 3 Phase, 50 Hz, along with push buttons start and stop onsurface duly colour coaded set in to the panel box including connecting by PVC copper conductor cable of size 4 sq.mm x 4core. Cable shall be measured and paid separately under respective items.-03 Nos MAKE:- ABB / Siemens / Havells MAKE:- (MCCB): ABB(T-Max), Siemens (3VT), L&T (D-Sine), Legrand (DPX).

Earthing complete with GI earth plate electrode 600mm x 600mm x 6.3mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth wire 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15 mm bore dia GI pipe 'medium grade', watering pipe 20mm dia GI pipe 'light grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover (1:2:4) mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- (a) Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. (b) Earth continuity conductor beyond 7.5metre shall be measured and paid under respective item of this Schedule.

PVC / fiber junction box pole mounted type with hinged door of size 180mm x 180mm x 150mm (outside dimensions) for 3 phase & neutral comprising of aluminium bus bar 200 Amp capacity mounted on hygroscopic insulators, 01 No MCB SP 6 Amp, PVC / fibre glass for incoming / outgoing cable with locking arrangement including fixing on street light poles with two Nos of MS flat iron clamps made by 25mm x 3mm fixed with nuts, bolts, with and including provision of painting with two coat of black bitumen paint over a coat of red oxide primer and making all required electrical connections, complete all as specified and directed.

High efficient LED street light fitting 45 W, Aluminium pressure Die cast housing parts for longlife, Pure polyester powder coated Dark Gray housing, High purity PMMA lenses for superior performance, Toughened glass with silicon gaskets for IP65 protection, Driver cover designed to suit top maintenance, Suitable for external pole dia up to 50 mm, Power factor>0.95, Lumianire lumen output-6440 lm, CCCV driver with Voltage range 150-270 V AC, Temperature range-0 to 50 degree Centigrade, Driver efficiency > 85%, Power factor > 0.95, THD<10%, CRI >70, Colour Temperature- 5700K, Surge protection from over voltages-4.0kV in CM, 50000 burning hours, Luminaire efficacy >92lm/W including supply and fixing three runs of of FRLS Copper conductor of size 1.5 Sq.mm single core with fixing accessories from junctioin box to light fitting, complete all as specified and directed. MAKE:- Cat. No. VEGA-LSTV-45-CDL of Crompton or techno-commercially equivalent model in WIPRO / HAVELLS / PHILLIPS.

High efficient LED street light fitting 150 W, Aluminium pressure Die cast housing parts for longlife, Pure polyester powder coated Dark Gray housing, High purity PMMA lenses for superior performance, Toughened glass with silicon gaskets for IP65 protection, Driver cover designed to suit top maintenance, suitable for external pole dia. up to 50 mm, Power factor>0.95, Lumianire lumen output- 6440 lm, CCCV driver with Voltage range 150-270 V AC, Temperature range- 0 to 50 degree Centigrade, Driver efficiency > 85%, Power factor > 0.95, THD<10%, CRI >70, Colour Temperature- 5700K, Surge protection from over voltages- 4.0kV in CM, 50000 burning hours, Luminaire efficacy >92lm/W including supply and fixing three runs of of FRLS Copper conductor of size 1.5 Sq.mm single core with fixing accessories from junctioin box to light fitting including provision of fixing brackets, complete all as specified and directed. MAKE:- Cat. No. PLUTO NEO-LFLN-150-CDL-60-M of Crompton or techno-commercially equivalent model in WIPRO / HAVELLS / PHILLIPS.

New generation, post-top latern 40W LED 5700K, energy saving, environment friendly, long life aesthetically designed die-cast aluminium landscape luminaire for downward lighting with high power LED as light souce complete with all accessories including provision of three runs of of FRLS Copper conductor of size 1.5 sq.mm single core with fixing accessories from junctioin box to light fitting, complete all as specified and directed. MAKE:- Cat. No. MAPLE-LPTO-40-CDL of Crompton or techno-commercially equivalent model in WIPRO / HAVELLS / PHILLIPS

Street light bracket made out of 40mm dia GI tubing medium grade, of 1.5 metre long including bending, welding, drilling holes as required and fixing with flat iron clamps 50mm x 6 mm (02 Nos) with suitable nuts, bolts and washers to steel tubular / concrete poles complete, including preparation of steel and iron surfaces and applying two coat of aluminium paint, first quality, over a coat of primer, complete all as specified and directed.

SL. ITEM NO. 12.71 CONTD... (a) MCCB 4 pole 415V, 200 Amps, 50 Hz with thermal magnetic release and Ics=100%Icu with rupturing capacity 36 KA, adjustable overload min 70-100% -1 No.(Incoming) (b) MCCB 4 pole 415V, 150 Amps, 50 Hz with thermal magnetic release and Ics=100%Icu with rupturing capacity 25 KA, adjustable overload min 70-100% -1 No (c) MCCB 4 pole 415V, 40 Amps, 50 Hz with thermal magnetic release and Ics=100%Icu with rupturing capacity 25 KA, adjustable overload min 70-100% -2 Nos. (d) MCCB 4 pole 415V, 25 Amps, 50 Hz with thermal magnetic release and Ics=100%Icu with rupturing capacity 16 KA, adjustable overload min 70-100% -3 Nos. (e) Panel mounted type digital multifunctional energy meter A, V, Z, KW, PF , CT operated, LT 3 phase, 4 wire, including ct ratio 250/5---01 Nos (f) LED Indicating lamps set RYB …. 01 set (g) Timer switch with contactor and MCB TPN 430Volts 32 Amp MAKE;- (of MCCBs);-: ABB (T-Max) / Siemens (3VT) / L&T (D-Sine) / Legrand(DPX)

MCB TPN 415 Volts, 63 Amps, 50 Hz, 'C' curve, 10 KA breaking capacity, complete all as specified and directed. Make:- Cat No. DHMGCTNF063 of Havells or technoc commercially equivalent model in Legrand / Siemens / C&S

Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of anti-corrosive paint (double compound) over a coat of anti-corrosive primer, complete all as specified and directed.

Providing and spreading of high quality weedicide containing parquet dichloride (24%SL) chemical, Gramoxone by Syngeta India Ltd or equivalent over the prepared surface to prevent the growth of the weeds in the top surface, complete all as specified and directed.

WMM (Wet Mix Macadam),100mm compacted thickness using clean crushed graded aggregates, conforming to table 400-11 of MOTRH Specificatin for roads and granular material, premixed with water at optimum moisture content in mechanical mix plant, arriage of mixed material by tipper to site, laying in uniform layers with pavers on prepared base, rolling with 8 to 12 tonne vibratory roller to desired thicness, camber etc., till the density achieved is at least 98 percent of the maximum dry density of the material determined as per IS 2720 (Part 8) complete all as per clause 406 of MORTH specification for road all specified and directed.

Supply and installation of ITF (International Tennis Federation) certified 8 layers acrylic system with thickness upto 2mm. The flooring should be certified by International Tennis Federation (ITF) and should have application as first layer of primer (% 100 acrylic latex based emulsion to improve bond of acrylic court system to the asphalt surface having consumption ratio of 0.014kg/sqft), second layer of acrylic Resurfacer (Filling and smoothing asphalt or concrete surfaces in preparation for Acryflex Tennis court system and also fills the surface chips, voids and conceals repairs while providing a smooth for colour coating. It should have a consumption ratio of 0.046kg/sqft), third, fourth & fifth layer of liquid rubber cushion with a total consumption ratio of 0.11 kg per sqft, sixth & seventh layer of pre-coat (Quartz filled %100 acrylic latex based textured tennis top coat with a total consumption ratio of 0.078kg/sqft) and eighth layer of top coat (100% acrylic latex polymer & colour coat for the finished surface to protect from UV. It should have consumption ratio of 0.023kg/sqft). On top of these 8 layers, the line marking should be done with overline paint (%100 acrylic latex based high hiding line paints. It should have consumption ratio of 4kg/court). The acrylic resurfacer must have silica sand infill to be embedded into it with consumption ratio of 0.065kg/sqft complete all as specified and directed. Make for Synthetic Acrylic surface: Pacecourt pro of M/s Balaji Sports Co, Ultra SporTurf of Sports Concepts & Syestems or any other ITF approved Category-3 Medium category Acrylic surface make. Note:-The work for synthetic acrylic surface for tennis court including Asphaltic Sub-Base must be executed by ITF approved Specialist Agency.

Supply and installation of removable tennis poles of height 3.5 feet with MS pipe 2.5 - 3.2mm thick, square shape of size 80 x 80mm with ratchet system for net tightening and trolley system to carry extra PVC weights, total weight 150 kg on each side, epoxy green poles and black trolley paint including all civil works for erection, accessories, freight, shifting complete all as specified and directed.

Supply and installation of standard Lawn Tennis Net NET as per ITF guidelines, complete all as specified and directed.

Shifting of Transformer from substations to variours substation / transformers locations at NSTL area by road and removing the under Rated 400 KVA transformer by fxing / errecting of the healthy 630 KVA transformer with the hydra / crane support making the necessary HT / LT cable connections earth connections and restoration of power supply, complete all as specified and directed.

S V S ENTERPRISES

SVS PROJECTS

Venkateswara Electricals

VENKATA SAI SRINIVASA CONSTRUCTIONS PRIVATE LIMITED

BALAJI MATRIX HOLDINGS