Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.6 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹52.7 L+₹1.9 L (3.78%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest | |
| 3 | L3₹54.6 L+₹3.8 L (7.51%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest | |
| 4 | L4₹54.7 L+₹3.9 L (7.69%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest | |
| 5 | L5₹54.7 L+₹4.0 L (7.78%)Rejected-AOC | L5 | Rejected-AOC Other than Lowest |
Tender Value
₹45.1 L
EMD Value
₹90,200
Closing Date
11 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 969 EWS
GE 969 EWS C/O 56 APO
SPL REPAIR TO BLDG NO P-2, MINOR WORK AND REVENUE WORK AT HAWS GULMARG UNDER GE 969 EWS
2024_MES_661077_1
CA NO 969 WS - /2024-25
Open Tender
Civil Works
Item Rate
270 days
GULMARG
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 969 EWS
₹90,200
Yes
5 Sept 2024
21 Jun 2024
18 Jul 2024
21 Jun 2024
11 Jul 2024
5 Jul 2024
Amount
Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced complete all as specified and as directed.
M&L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.
M&L 75 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub base of flooring, complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.
M&L machine cut Kota stone slab flooring 20-25mm thick per sample kept in GE's office, laid over and incl 15mm thick cement screed bed in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and polishing to achive mirror finish complete all as specified and as directed.
M&L non skid ceramic Coloured tiles (joint free tile) area of each tile (sqr/rectangle) exc 0.06 Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer with CM (1:4) 15mm thick for laying floor finishes complete all as specified and as directed.
S&F Glazed coloured ceremic tiles 350x350x8mm/450x350x8mm thick , in dado / skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.
Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit, complete all as specified and as directed.
All as per above item No. 8 here in before but not exc 1.5 Sqm each, complete all as specified and as directed.
Taking down shutters of any description area exc 1.00 Sqm and not exc 2 Sqm each, complete all as specified and as directed.
Taking down shutters of any description n.exc 1.00 Sqm each, complete all as specified and as directed.
Taking down shutters of any description area exc 2 Sqm each and refixing in same opening after necessary repairs/re-size, complete all as specified and as directed.
Taking down shutters of any description or type area exc 1.00 Sqm but n exc 2 sqm and refixing in same opening after necessary repairs/re size, complete all as specified and as directed.
Forming jambs, etc., to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing. jointing and pointing to match existing work, complete with CM (1:4) complete all as specified and as directed.
S&F Powder coated Anodised aluminums frame for sliding windows , ventilators and with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc. complete all as specified and directed.
S&F Powder coated Anodized Aluminium window and ventilators shutters, without sash bar, aluminum section weighting 0.55kg / m including necessary joining cleats,glazing clips, rubber packing, anodized aluminum snap beading, screws, locking arragement, Handles etc complete all as specified and as directed.
S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows, complete all as specified and as directed.
Supply and fixed 2nd class hard wood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed.
M&L Prelaminated particle board interior grade, 18/19 mm thick with both faces white base, fixed with screws to timber frame work as in shelves/ Cupboard shutters and partitions Add fixed and repairs, complete all as specified and as directed.
M&L 6mm thick teak wood lipping for external of 18/19 mm thickness of board, complete all as specified and as directed.
S&F 100mm Hasp & staple, safety type, Brass hinges pin including bolt to hinges plate & fixed with screw, complete all as specified and as directed.
S&F Continuous (piano) hinges,40mm wide mild steel, bright finish or electrogalvanised, complete all as specified and as directed.
S&F 150mm Extruded brass handies, fabricated type polished complete all as specified and as directed.
S&F Butt hinges, 100mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed.
S&F Brass, sliding door bolt 250mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed.
Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads, complete all as specified and as directed.
S&F Sheet glass 5 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and as directed.
Taking down Gl water tubing and connections and taken in to schedule of credit for 20mm bore complete all as specified and as directed.
S&F tubing, medium grade, galvanised, 20 mm bore with all fittings: fixed to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old 20mm bore GI tubing and connections in new or old position (wall, ceiling,floor etc) complete all as specified and as directed.
M&L for lagging on 15 mm internal dia pipe all round with 50 mm thick bonded mineral wool pre-formed 'SNAP ON' pipe section of density of 144 Kg/Sgcm confirm to IS 9842 including providing with chicken mesh wire netting 25 gauge 20 mm mesh and 0.01 mm aluminium foil etc complete all as specified and as directed.
M&L for lagging on 20mm internal dia pipe all round with 50 mm thick bonded mineral wool pre-formed 'SNAP ON' pipe section of density of 144 Kg/Sqcm confirm to IS 9842 including providing with chicken mesh wire netting 25 gauge 20 mm mesh and 0.01 mm aluminium foil etc complete all as specified and as directed.
S&F 20mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wal, celings or in floors, complete all as specified and as directed.
Supply and fixing stop cock gunmetal gate valve, brass ball valve, gunmetal non-returning valve in PP-R pipe line (cost of male sockets included) complete all as specified and as directed.
Supply and fixing 20mm PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and as directed.
Supply and fixing 20mm PP-R Ball valves (brass insert) as per requirement of the site complete all as specified and as directed.
Dismantling PVC water tanks, 1000 liters capacity & removing credit to contractor, complete all as specified and as directed.
S&F FRP Rotex PUF insulation tank 1000 ltr capacity consists of outer layer of tank white in colour made up of virgin FRP, inner layer of tank white in colour made up of virgin LLDP/HDPE, in middle of both the layers polyurethane fome (PUF) of 50 mm thick, including inlet along with float valve, outlet, overflow provision and tank lid with a sutable locking system complete all as specified and as directed.
S&F in repairs vitreous Counter top wash basin , white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.
M&L For Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.
S&F vitreous china wash down water closet (Single unit) including flushing cistern white/coloured match to the tiles fixed to floor complete all as specified and as directed.
S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S&F in repairs 15mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.
S&F in repairs bib cock long body with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed complete all as specified and as directed.
S&F in repairs Tall Basin Mixer pillar Tap Type fancy type chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore, complete all as specified and as directed.
S&F in repairs CP wall mixer with for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe, complete all as specified and as directed.
S&F in repair Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S&F toilet paper holder premium quality, stainless steel or brass chromium plated, complete all as specified and as directed.
S & F Corner glass Shelves (with brackets) for bath room, complete all as specified and as directed.
S&F in repairs PVC gully trap with cover of size 125mm including PCC bed complete all as specified and as directed.
S&F 75mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement etc, complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.
S&F PVC (SWR) bends 75mm bore, complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.
S&F PVC (SWR) bends 110mm bore, complete all as specified and as directed.
S&F 110mm PVC (SWR) junction single (single T) equal or unequal, complete all as specified and as directed.
Dismantling of plain or corrugated steel sheeting ,any gauge, thickness, including Nainital or similar pattern roof coverings in any position, complete all as specified and as directed.
S&F 0.63mm thick grade with 120gm per sqm zinc coating corrugated galvanised iron steel sheeting with two corrugaion side lap (Horizontal distance of side and end lap shall not be less than 145mm and 150mm respecively fixed with L Type or J Type or cranked hook bolts in roof, complete all as specified and as directed.
All as per above item No. 60 but except sheeting
S&F 0.80mm thick grade Plain with 120gm per sqm zinc coating, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings, complete all as specified and as directed.
Preparing new zinc (or galvanized) surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of etch primer complete all as specified and as directed.
Preparation of old painted zinc or galvanised surface of any description and in position and applying one coat of synthetic enamel paint all as specified. Note :-(a) The surface of corrugated steel sheeting shall be measured flat (not girth) without any extra allowance for laps and the area obtain shall be increased by 14%). (b) The surface of plain steel sheeting as in ridge, hips, velley gutters, flashings etc, shall be measured flat alongwith girth (length and firth as fixed) and the area obtained shall be added to the area of corrugated steel sheeting, complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed.
M&L for 6 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work on wall etc. complete all as specified and directed.
M&L for second class softwood 12 mm thick planed on both side and edges tongued and grooved or rebated and joints are chamfered one side and the boardind is matched, wixed with nails in walls including preparing the surface and applying french polish over a coat of wood filler in new work with two or more coats complete all as specified and as directed.
M&L for 12 mm thick plywood, grade BWR type BB, fixed with nails to timber frame work in ceiling etc. complete all as specified and directed.
S&F Decorative wooden tiles of size 300x300x10mm thick of second class softwood, with fixing on ceiling of nails and glue/ fevicole over a 12 mm Plywood, design and shade as approved by Engr-in-Charge.
S&F 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on Ceiling, complete all as specified and as directed.
S&F 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on wall, complete all as specified and as directed.
M&L for 5 mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partions & Ceiling etc inclusive of solvent cement & fixing at site, complete all as specified and as directed.
M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer, complete all as specified and as directed.
M&L preparation of old painted surface of wood and wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and as directed.
M&L painting old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint incl preparation of surfaces, complete all as specified and as directed.
Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and directed.
Dismantling timber scantling under 40 sq cm in section in any position as in unframed/framed work, complete all as specified and directed.
M&L 2nd Class soft wood (Kail) as in scantling, clean swan timber fixed, complete all as specified and as directed.
M&L 2nd class soft wood Plain fillets exc 13 Sq.cm , n exc 25 Sq.cm rectangular in section, clean sawn screwed with nails or brads complete all as specified and as directed.
M&L 2nd class soft wood Plain fillets exc 3 Sq.cm but n.exc 6 Sq cm ,rectangular in section, clean sawn screwed with nails or brads complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cm incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed.
M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in in CM (1:4) complete all as specified and as directed.
M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar (1:4) and finished even and smooth without using extra cement, complete all as specified and as directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4), complete all as specified and as directed.
All as above item No. 84 but except Stone
Taking down cement or cement lime plaster, on brick or stone walls,/ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.any description complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement mixing with integral water proofing compound complete all as specified and as directed.
M&L rendering 10mm thick on fair faces of brick work or concrete surfaces on wall in CM 1:4 finished even and smooth without using extra cement mixed with water proofing compound Note : WPC shall be measured and paid separately.
Supply only Liquid water proofing compound
M&L for preparing newly plastered surfaces of walls , applying two coats of distemper oil emultion, white tinted, complete all as specified and as directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.
M&L Plain Cement concrete 1:4:8 type D-2 (40 mm graded aggregate) in foundation, filling and masss concrete, complete all as specified and as directed.
M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed.
M&L new steel or iron surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide/zinc chrome primer incl prepation of surfaces, complete all as specified and as directed.
M&L Granite (of any type)18-20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.
Rounding to edges of Granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided.
Per- cast reinforced cement concrete M-15 (1:2:4 nominal mix ) type B-I, (Using 20mm grade stone agg) set in cement mortar (1:4) as in manhole cover complete all as specified and as directed.
TMT MS bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips all as specified and as directed by Engr-in-Charge.
Complete removal of existing treatment on external wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and surfaces and applying two coats of exterior emulsion weather proof paint Apex over one coat of external wall primer and all as specified and as directed.
Supply and fix air termination single pointed copper rod not less than 12mm dia and 300mm long including fixing of GI base on epoxy insulators of suitable size to isolate from the roof and fixing of insulators on roof over the purlin using self tapping screws of suitable length or other means to make the roof leakage proof for fixing of air terminal rod and connecting with down/ roof conductors complete all as specified and as directed.
S&F copper strip of size 20x3mm including epoxy/porcelain insulators of suitable size, distance between insulators not more than 1 mtr including fixing screws washers etc complete for PCC block of size 200x200x200mm including cost of PCC block for RCC roof, using screws, washers, gutti/rawal plugs etc complete all as specified and as directed.
M&L for test point terminal block made of gqun metal or B142 phosphorus bronze size 75 x 75 x 25 mm drilled and screw end connected to exisiting Aluminium/GI strips complete including 3 nos. 8 mm dia 25 mm long hex. head screw complete and including fixing of test point with sheet metal enclosure on insulators to isolate from the walls, fixing of of insulators on wall using suitable size of screws, washers, gutti/rawal plugs etc, including making good to disturbed surfaces, complete all as specified and as directed.
Earthing complete with copper earth plate electrode of size 600 mm x 600 x 3.15 mm thick buried directly to ground vertically to a depth not less than 2.25 Mtr below the ground level with top edge of earth plate not less than 1.65 Mtr below normal ground level connected to 20x 3mm copper strip and earthing strip protected with 50 mm dia Gl pipe light grade filling around with charcoal dust and salt including excavation, returning, filling of earth and disposal of surplus soil to a a distance not exceeding 50 mtr and connected to Copper strip by means of GI nuts bolts and washers strip connected to earth plate including chamber PCC (1:3:6) type C1,using 20 mm graded stone aggregate in concrete pit pre-cast RCC 40 mm thick reinforced with 6 mm dia round at the rate of 75 mm C/C both way with 12 mm dia mild steel plain bar lifting handle 2 Nos funnel with wire mesh 20 mm dia GI pipe light grade watering pipe and frame work complete all as shown in electrical plate No. 3 of SSR Part-1 2009 including testing complete. (20x3mm copper earth strip upto 7.5 m length in included in unit rate quoted by contractor and beyond this length the same shall be measured & paid separately.
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out hard dense soil, complete all as specified and as directed.
M&L for 75 mm thick Cement concrete 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) in sub base complete all as specified and as directed.
M&L Hard core of gauge n. exc 63mm deposited, spread of stone boulders, complete all as specified and as directed.
M&L Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar (1:3), joints 20mm thick grouted in cement mortar (1:2) with an admixture of metallic floor hardner 5% by weight of cement and struck flush as directed by Engr-in-Charge.
M&L Precast cement concrete block masonary with hollow blocks type C1, 1:3:6 (using 20mm graded stone aggregate) masonary exc. 10cm in width and setting in cement mortar (1:6) complete all as specified and as directed.
M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, ridge, facia etc, fixed with self tapping screws complete all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welding tubes confirm to IS 1161 - 1979 grade ST-240, complete all as specified and as directed.
S&F Roof trusses (framed) trussed, Purlis, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W (Gde- E-250) quality-A, complete all as specified and as directed.
Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc.
M&L for point wiring in PVC casing caping with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.
(a) One light point/fan point/ex fan point controlled by one 5 Amps switch one way
(b) One 3 pin 5 Amp switch socket outlet on independent board
(c) One 3 pin 5 Amp switch socket outlet on same board
M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sqmm as earth continuity conductor.
S&F switch flush type , single pole, one way 6 amp 240 volts, complete all as specified and as directed. Note : Taking down of swithches included in taking down point wiring
S&F Flush type Socket outlet 6 Amps, complete all as specified and as directed. Note : Taking down of socket outlet included in taking down point wiring
Switch socket combination 5 pin 15A flush Type complete all as specified and as directed.
S&F ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed.
S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed.
S&F Distribution Board SPN 8 Way,Single door complete all as specified and as directed.
S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of capacity SPN 32 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning.
S&F 240V, 10 KA 'B' curve (MCBs) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
S&F LED Lamp 15 W, complete all as specified and as directed.
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose. complete all as specified and as specified and as directed.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.
M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR 2020 part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 6 mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc
Note:- Schedule of credit Rs. 1,18,845.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
M/S ESS EMM ENTERPRISES
M/S HAJI MOHD ASHRAF SUMJI
M/S BILAL CONSTRUCTION AND CO
M/S KULWANT SINGH RAINA AND CO
M/S NISAR AND CO
M/S SUMJI BROTHERS
ALI MOHD NAJAR
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .