SPECIAL REPAIR WORK IN BLDG NO P-78/45, 145 AND CERTAIN E/M SANCTIONED WORK IN ARMY AREA JODHPUR

Amount

Taking down carefully old unsv aluminum/copper point wiring (light/fan/ socket/ power) complete including fittings such as switch, socket, ceiling roses, light fittings etc. and making good disturbed surface of wall all as specified and directed.

Material and labour for point wiring (concealed) for one light / exhaust fan complete with two run of 1.5 sq mm single core multi stranded copper conductor PVC FRLS insulated unsheathed 1100 Volt grade cable in and incl PVC FRLS CONCEALED CONDUIT PIPE medium grade (ISI Marked) with all accessories including new pressed steel terminal boxes (sunk in wall ) with 3.00 mm thick plastic laminated sheet top cover or PVC board including PVC top cover with 1.50 sq mm insulated unsheathed PVC FRLS multistranded copper conductor for common earth and connecting to earth dolly and making good disturbed surface of wall incl matching the colour of wall/ceiling with extisting wall/ceiling colour all as specified and directed

All as per Ser Item No 02 above but for One socket out let 5 Amps 5 Pin on same board with other switch

All as per Ser Item No 02 above but for One socket out let 5 Amps 5 pin on independent board

All as per Ser Item No 02 above but with single core multistranded cable of size 2.5 Sqmm for one 15 Amps socket outlet on independent board and multistanded insulated copper earth continuity conductor of size 2.5 Sqmm complete all as specified and directed.

Supply and fixing switch piano flush type 5 Amps single pole one way complete all as specified and directed.

Supply and fixing socket out let 2 in 1 multi pin 5 Amps flush type universal complete all as specified and directed.

Supply and fixing switch piano15/16 Amps one way 240 volts complete all as specified and directed.

Supply and fixing socket outlet in repair 2 in 1, 3 pin, 5 and 15 Amps socket outlet flush type 240 volts SP complete all as specified and directed.

Supply and fixing Ceiling rose on PVC FRLS board size 65 X 50 mm three terminal complete all as specified and directed.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 20 Amps complete all as specified and directed.

Supply and fixing Lamp Holder, PVC FRLS/polycarbonate type with back plate suitable for batten fittings incl emergency LED bulb 12 watt complete all as specified and directed.

Supply and fixing LED emergency batten lights fitting 10 watt, 220 V AC with high quality polycarbonate and translucent serrated milky white diffuser to get glare free, smooth light distribution, thermoplastic/aluminium housing enhances safety and luminaire is pre-wired with high efficiency electronic driver and LED lamp, power backup of 3 to 4 hrs including up with three core flexible copper conductor cable suitable sze complete with all accessories and necessary connection complete all as specified and directed.

Supply and fixing LED emergency batten lights fitting 20 watt, 220 V AC with high quality polycarbonate and translucent serrated milky white diffuser to get glare free, smooth light distribution, thermoplastic/alluminium housing enhances safety and luminaire is pre-wired with high efficiency electronic driver and LED lamp power backup of 3 to 4 hrs including up with three core flexible copper conductor cable suitable sze complete with all accessories and necessary connection complete all as specified and directed.

Supply and fixing LED street light fitting 35 watt (High power SMD LED's) 230 V AC outdoor type with high pressure die cast aluminium housing powder coated in Silver grey and toughened glass and heat resistant complete with driver, lamp, bracket with impact and corrosion resistant incl thermal magagement in multiple optics (Luminaire efficacy of > 110 lm/W ) complete with IP 65/66 LED protection with all accessories and make necessary electric connection, GI bracket of suitable size, nuts and bolts incl black colour complete all as specified and directed.

Supply & fix exhaust fans steel body front guard protection for bird, Powder-coated for long life, AC single phase 230/ 240 V of size 300 mm sweep with louver, air delivery 1290 cmh including opening round hole on brick/stone/ PCC block wall for exhaust fan mounting, plaster finishing, colour as matching with existing surface & colour and grout bolts/fastner etc. at any hight of bldgs complete all as specified and directed..

M&L for sub main wiring with 2 run of 10 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc incl connection to street light as required complete all as specified and directed.

S&F Distribution board sheet encloser powder coated for MCBs with fully insulated busbar 200 Amps rated & shrouded Neutral bars and earthing stud and degree of protection - IP 43 - #IK 09 With Metal Door/ mechanical resistance, SPN DB 12 way 230 volts double door with Neutral bar, Earthbar and Cable ties for Cable management concealed flush on wall including taking down old unsv DB complete all as specified and directed.

Supply and fix electric water heater (geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection pipe for hot/cold water etc complete all as directed.

Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2..25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below the normal ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts, washers of galvanised iron, thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore medium grade GI pipe with funnel and wire mesh for watering all as shown in electrc plate No 5 connected to earth test point. 40mm thick pre cast RCC M-15 ( Nominal mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40X40X3mm frame for cover, PCC chamber in cement concrete M-15 ( Nominal mix) , excavation and earth work in any type of soil and connected all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of 16 sq mm 2 core complete all as spefied and directed.

Excavating in trenches in soft/loose soil, n. exc. 1.5 m wide and n. exc. 1.5 m in depth, cable laying in tench and n.exc 1.5 m in depth and getting out complete all as specified and directed.

M&L for dry clean fine river sand as in sand cushioning to underground cable including punning down of sand with layer of sand 8cm thick before laying of cable and 15cm after laying of cable in trenches all as specified and directed. Note :- Punned thickness shall only be measured and paid.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm under ground cables for protection

M&L for galvanised steel tubing, light grade, for protection of cable, laid in trenches/road crossing/floor or fixed to pole/wall with all fittings, of size 40 mm bore.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Supply, installation, commissioning and testing of Inclined Curved Glass top design with Internal LED Light for superior aesthetic & merchandising Deep Freezer of capacity 320 ltr with CFC-free refrigerant, swing door, auto defrost single, Lock facility phase 240 volt, 50 Hz AC incl electric cable with plug top and heavy duty lockable wheels stand (roller type) complete all as specified and directed.

Supply and fixing ABC Dry Powder Fire Extinguishers, 6 Kg (EN3 certified) PT6A with a fire rating of 27A 183B C (Portable Dry Powder fire extinguisher stored pressure) complete all as specified and directed.

Supply and fixing voltage stabilizer for automatic operation, single phase, naturally air cooled, indoor type, designed for input variation between having input voltage 170 V to 280 V with output voltage stabilized at 230 V with accuracy of (+/-) 2.5%, with time delay and digital display with auth scroll input and output voltage complete of capacity 4 KVA complete all as specified and directed.

Supply, install and testing Split Air Conditioner, hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating and EER 3.2 of capacity 2.0 TR including stand for outdoor/indoor unit, copper pipe if extra reqd, cable and suitable drain out pipe etc. complete all as specified and directed.

Supply install and testing Split Air Conditioner, hi wall units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating and EER 3.2.of capacity 1.5 TR including stand for outdoor/indoor unit, copper pipe if extra reqd, cable and suitable drain out pipe upto grund etc. complete all as specified and directed.

M&L for Anti static matting of thickness not less than 3 mm, staight laid on floor, insulated type rubber based, suitable for electronic component/ equipment/ communication equipment to eliminate static accunulation to prevent static hazard and accidents complete all as required and directed.

Supply & Fixing (concealed) flush in wall Single pole and neutral enclosure with a two pin and earth plug and socket complete with one SPN MCB 20/25Amp, 240 volts complete all as specified and directed.

S&F 15mm dia angle valve brass finish screwed down high pressure, suitable for GI pipe connection complete all as specified and as directed.

M&L for sub main wiring (concealed) with 2 run of 4 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to box, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 25 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note : Two run of 4 Sq.mm. and one run of 4 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.

M&L for Sub main wiring with PVC insulated but unsheathed 2x4 sqmm single core multi stranded copper conductor cable passing through and incl PVC casing caping on wall (by means of screw incl making good existing) ISI marked and casing capping accessries fixed on surface of wall, ceiling etc, making good the disturbed surface with and incl 1x4 sqmm single core copper conductor cable PVC insulated and unsheathed as earth wire (green colour). Note:- Two run of 4.0 Sq.mm. and one run of 4.0 Sq.mm (earth wire) cable incuding one run of PVC casing caping will be measured as one length including making good the disturbed surfaces.

M&L for Sub main wiring with PVC insulated but unsheathed 2x10 sqmm single core multi stranded copper conductor cable passing through and incl PVC casing caping on wall (by means of screw incl making good existing) ISI marked and casing capping accessries fixed on surface of wall, ceiling etc, making good the disturbed surface with and incl 1x10 sqmm single core copper conductor cable PVC insulated and unsheathed as earth wire (green colour). Note:- Two run of 10 Sq.mm. and one run of 10 Sq.mm (earth wire) cable incuding one run of PVC casing caping will be measured as one length including making good the disturbed surfaces.

S&F Distribution board sheet encloser powder coated for MCBs with bus bar 200 Amps rated and neutral link, earthing stud and degree of protection - IP43 with door / mechanical resistance IK 07, SPN 4 way 240 volts double door, concealed flush on wall incl plaster work, colouring matching with existing surface complete all as specified and directed.

S&F Distribution board sheet encloser powder coated for MCBs with bus bar 200 Amps rated and neutral link, earthing stud and degree of protection - IP43 with door / mechanical resistance IK 07, SPN 08 way 240 volts double door, concealed flush on wall incl plaster work, colouring matching with existing surface complete all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

All as per srl item No 39 above but for SPN 40 to 63 Amp 240 V 10 KA C cure

M&L for Point wiring (Concealed) for One fan point controlled by one switch one way with 1.5 Sqmm (nominal area) copper conductor Flame Retardant Low Smoke cable (multi-stranded) PVC insulated and unsheathed electric cable 1100 volts (ISI marked) incl drawn through PVC concealed conduit of suitable size (as per conductor run) with all fittings and accessories including PVC insulated unsheathed electric cable 1100 volts 1.5 Sqmm (multi-stranded) copper conductor single core (green colour) as continuous earth wire connected to common earth dolly including METAL FLUSH BOX made out of MS suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked, making good disturbed surface of wall incl matching the colour of wall/ceiling with existing wall/ceiling colour all as specified and directed. Note:- Screw/bolt used for fixing baords, ceiling rose, square blocks etc should be nickel cadmium screws.

S & F switch piano type 1 way 5A, 1 module 240 Volts complete all as specified and directed.

M&L for point wiring for one 15 Amps socket point on independent board complete with 2.5 sqmm single core multi stranded copper conductor PVC FRLS insulated and unsheathed 1100 Volt grade cable in and incl casing capping (ISI Marked) with all accessories including new pressed steel terminal boxes (flush in wall ) and 3.00 mm thick plastic laminated sheet top cover or PVC FRLS board including PVC FRLS top cover with 2.50 sq mm insulated unsheathed PVC FRLS multistranded copper conductor for common earth and connecting to earth dolly and including METAL FLUSH BOX made out of MS suitable size and shape and other boxes for mounting light fittings etc covered with 3mm thick plastic laminated Hylum ISI marked, making good disturbed surface of wall incl matching the colour of wall/ceiling with existing wall/ceiling colour all as specified and directed. Note:- Screw/bolt used for fixing baords, ceiling rose, square blocks etc should be nickel cadmium screws.

S & F Socket outlet 2 in 1, 3 pin 15 Amp flush type 240 volts SP

Supply and fix exhaust fan made of study Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as directed.

M&L for opening round hole on brick/stone/PCC block wall for exhaust fan mounting, plaster finishing, colour as matching with existing surface & colour and grout bolts/fastner etc. at any hight of bldgs complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc; overall thickness and removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed by Engineer in charge.

M&L for plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates as over roof for making good depression/ undulation to make the existing roof surfaces as filling in depression of roof slab/ floor padding/ roof kerbs rounded or chamfered on edges etc complete all as specified and as directed.

M&L for carrying out water proofing treatment for roofs in the following stages:- (i) Rendering 10mm thick in 1:4 mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement. Note : (WPC shell be measured and paid separately under respective item of schedule). (ii) First coat of bitumen primer confirming to IS 3384 @0.300 Kg/ Sqm over plastered surafces (iii) Second layer of 3.0 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcement and having weight 3 Kg/ Sqm with mineral gravel finish on top complete laid with blown type bitumen grade 85/25 @ 1.20 Kg/ Sqm complete all as specified and as directed. (iv) Finally applying two protective coats of bituminous aluminium based reflective paint to safeguard against UV, including preparing of surfaces of roof (second coat apply after 24 hrs or as per manufacturing instructions).

M&L for plain cement concrete 1:3:6 type C-1,using 20mm graded stone aggregates as in coping to parapet walls including necessary formwork complete all as specified and as directed.

Supply only integral water proofing liquid ISI marked

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.

Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide.

M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.

M&L for 16 -18mm thick granite (colour as approved) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 10mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20 mm (+ 2mm) thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

M&L for mirror polished machine cut Kota stone slab 15-16 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 and jointed complete all as specified and as directed.

M&L for Jodhpur stone slabs, machine cut (dressed face) 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted (vertical or horrizontal) and set, jointed and grouted cement mortar 1:3 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab making with cutting of groove as required etc; complete all as specified and as directed.

M&L for Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified.

Dismantling of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work, serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed.

M&L for squared rubble walling jodhpur type, brought upto course, well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

All as per ser item No 62 above but, except stone complete all as specified and as directed.

Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling,Jodhpur type, brought upto courses all as specified and as directed.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:6 over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), complete all as specified and as directed.

M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.

M&L for 10mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction complete all as specified and directed.

Dismantling cast iron work of any description and in any position complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 100mm bore pipe cast iron 'P' or 'S' trap complete all as specified.

S&F 75mm bore pipe cast iron 'P' or 'S' trap complete all as specified.

S&F 100mm bore pipe cast iron cowls complete all as specified.

S&F 75mm bore pipe cast iron cowls complete all as specified.

M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc complete all as specified and as directed.

M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions complete all as specified and as directed.

M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions complete all as specified and as directed.

S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc complete all as specified and as directed.

S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc complete all as specified and as directed.

M&L cement concrete type E-2, 1:5:10 (40mm graded crushed stone aggregate) as in sunken portion complete all as specified and as directed.

S&F in repair 40mm bore steel water tubing medium grade galvanised inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction as spout for sunken complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each and removing from site or to store as directed by Engineer incharge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store complete all as specified and as directed.

S&F of pressed steel framed made out of 1.25mm thick MS sheet, of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and cement concrete (1:3:6) type C-1 as in fillings and mass concrete, filling backs of chowkats etc. complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelars, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work complete all as specified and as directed.

S&F of factory made 35 mm thick plain framed, panelled shutters (two panel) with 2nd class hard wood rail and style with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F of Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer incharge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required) all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 fixed in repairs i.e, incl taking down and removal of old steel windows from site or to store complete all as specified and directed. Note:- Guard bar/ grill shall be measured and paid separately under respective item of Sch 'A'.

M&L for fabrication of aluminium powder coated window any pattern & design (openable with hinges, sliding, tilt and turn, casement , fixed type, villa type, ventilators) fabricated with anodized aluminium rectangular or any type section in frame with approved design & patterns including provn of fixing galvanised mild steel wire cloth on the outer side of frame etc; fixed in position all as specified and directed. Note:- Glass pane & galvanised mild steel wire cloth shall be measured and paid separately under respective Items of Sch 'A'.

S&F of sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane complete all as specified & as directed.

All as per srl item No 93 above but 4mm thick frosted glass complete all as specified and directed.

S&F of galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Mild steel round bars welded to steel windows or ventilators as in guard bars framed or unframed complete all as specified & as directed by Engineer incharge. Note:- Guard bars shall be factory welded & given one shop coat of red oxide or zinc chromate primer. Cost of factory welding & Shop coat of primer is deemed to be included in quoted rates.complete all as specified and as directed.

S&F of factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing S&F complete all as specified and as directed.

S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F of 100 mm size PVC/ Stainless Steel (as approved by Engineer incharge) butt hinges complete all as specified and as directed.

S&F mild steel door handles, stove enameled black, 150 mm long and fixed with steel screws complete all as specified and as directed.

S&F of mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified.

S&F of 300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified.

Dismantling wrought iron or mild steel work of any description and in any position not otherwise specifically provided for (framed/ unframed work) complete all as specified.

S&F of framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) complete all as specified and directed by Engineer-in-charge.

S&F of powder coated aluminium anodised deco grill weighing not less than 1.40 kg/ sqm and fixing necessary joining cleats/ frame etc; complete all as specified.

Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed.

Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed.

Taking down 25mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and as directed.

S&F of 15mm bore steel water tubing medium grade fixed on walls/floor/ceiling with and including necessary GI fittings such as sockets, bends, elbows, tees, short pieces etc complete all as specified and as directed.

S&F of 20mm bore steel water tubing medium grade galvanised fixed on walls/floor/ceiling with and including necessary GI fittings such as sockets, bends, elbows, tees, short pieces etc complete all as specified and as directed.

S&F of 25 mm bore steel water tubing medium grade galvanised fixed on walls/floor/ceiling with and including necessary GI fittings such as sockets, bends, elbows, tees, short pieces etc complete all as specified and as directed.

Fixing only 15mm bore old servisable steel water tubing any grade with all new fittings and fixed complete to walls and ceiling or laid in floor etccomplete all as specified and as directed.

Fixing only 20mm bore old servisable steel water tubing any grade with all new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

Fixing only 25mm bore old servisable steel water tubing any grade with all new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

S&F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white with integral foot rests and connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern and flush pipe) complete with provision of lime concrete bedding including taking down existing unserviceable WC of any discription and in any position & fixing new WC in repair and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

M&L vitreous china wash down water closet pan (pedestal pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube (Make of Jet 'Praayag' Cat Part No 5211 or Equivalent) incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed in repair complete and making good the disturbed portion etc. all as specified and directed.

S&F in repair PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. complete all as specified and as directed.

S&F in repair vitreous china wash basin, white/ coloured, flat back, size 550x400mm including PTMT waste fittings, 32mm bore size, waste pipe pvc 32mm bore and angle iron brackets of required size and length etc. and making good disturbed surfaces to match with the existing complete all as specified and as directed.

S&F in repair for Vitreous china urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections,complete all as specified and as directed.

S&F of low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and as directed.

Disconnecting existing PVC tank exc 500 Ltrs and not exc1000 Ltrs setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting refixing in position complete all as specified and directed.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered in whited colour hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and as directed.

S&F for 15mm bore chromium plated bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repair for pillar tap, brass, 15mm dia, with capston heads, chromium plated, fancy type screwed down, high pressure, with or without lettered hot or cold, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin all as specified and as directed.

S&F for 15mm bore stop valve/ angle stop cock chromium plated, fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified.

S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified.

S&F in repair chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union suitable for 15mm bore pipe etc; complete all as specified.

S&F in repair CP towel rail 450mm long fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified.

S&F in repair CP greating doom 100mm dia complete all as specified.

S&F 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight for 25mm ball valves-455gms) fixed in repairs i.e., incl taking down and removal of old unserviceable float valves complete all as specified and as directed.

S&F in repair PVC SWR type 'B' socketed rain water pipes 110mm dia conforming to IS: 4985/ IS: 13592 complete all as specified and as directed.

S&F in repair PVC SWR bend/shoe of PVC 110mm dia suitable for 110 mm bore / dia PVC SWR rain water pipes complete all as specified and as directed.

Preparing new or previously untreated surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and directed.

Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces complete all as specified and directed.

Preparation of new plastered surfaces of walls etc. & applying three coats of lime white wash complete all as specified.

Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash complete all as specified.

Preparing old surfaces incl brooming surfaces, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil or greasy spots incl washing rubbing down and stopping of distempered and painted surfaces and M&L for applying one coat of cement base paint on walls etc complete all as specified and directed.

Preparation of old decorated plastered surfaces of walls etc. & applying one coat of white wash complete all as specified and directed.

Preparation of old decorated plastered surfaces of ceiling etc. & applying one coat of white wash complete all as specified and directed.

Diva Infra

M/S KAUTILYA GARG

Surendra Singh

naveen enterprises

M/s Ajay kumar Garge