Supply, Installation, Testing and Commissioning of Street Lights from Mega Fruit Mandi Aglar Bridge towards Shopian Town Phase II

Supply, installation, testing and commissioning of 70W LED sensor based street light on existing brackets, having minimum system lumen output of 7700 lumens, minimum efficacy of 110 lumens/Watt, CCT 5700K with SDCM ≤ 5 and CRI ≥ 70, comprising non-corrosive high-pressure die-cast aluminium housing with toughened polycarbonate cover and separate driver compartment, IP66 ingress protection and IK07 impact resistance, power factor ≥ 0.95, fitted with integral isolated SMPS-based constant current LED driver with low THD, open/short-circuit protection, phase-to-phase protection up to 440V AC and surge protection up to 4 kV, having a rated life of 50,000 burning hours (L70) and suitable for dusk-to-dawn operation, complete with all accessories, installation, testing and commissioning, conforming to LM-79 and LM-80 standards with test reports from NABL/UL accredited laboratory, manufacturer having in-house NABL or Ministry of Science & Technology approved laboratory, of approved make (Havells / LT / Philips or as directed by the Engineer-in-Charge), The job including comprehensive replacement warranty of five (05) years, including free replacement of defective luminaire, driver or components during the warranty period, complete in all respects as per direction of Engineer-in-Charge.The documents must bear the original signature and official stamp of the OEM. Additionally, a pre-dispatch inspection of the lights shall be conducted, either in virtual mode or through physical inspection.

Providing and Fixing one-way arm bracket for mounting of luminaire on the top of pole, fabricated out of 50 mm diameter G.I. pipe, 0.9 metre long, complete with wall clamp, M.S. clamps, nuts, bolts and washers, including fabrication, drilling, welding and fixing on pole, complete in all respects as per direction of Engineer-in-Charge.Sample to be approved before fabrication.

Providing and Fixing M.S. junction box of approved make and suitable size, fabricated from 16 SWG sheet steel, powder-coated, complete with suitable clamps, fitted with 4-pole 32 Amp bakelite connector and 3–6 Amp MCB of Schneider/Legrand or equivalent make, including all required hardware, accessories and proper fixing arrangements, complete in all respects as per site requirement and directions of Engineer-in-Charge.

Providing and Fixing service connection and earthing to luminaire from junction box using 3x1.5 sq.mm PVC insulated, multistrand copper conductor wire of approved make, drawn through suitable PVC conduit including all necessary connections, complete in all respects as per direction of Engineer-in-Charge.(Havells/Polycab/SSk/or as directed by EIC)

Supplying, Laying, Testing and Commissioning of 10 sq mm 2 core unarmoured AL cable,1.1 kV grade XLPE insulated, conforming to IS:7098 (Part-1), laid overhead between poles, supported on hot-dip galvanised (GI) bearer wire of 8 SWG, including supply and fixing of GI bearer wire, turnbuckles, eye bolts, clamps, nuts, bolts and washers, binding of cable with PVC ties / GI binding wire at suitable intervals, proper tensioning and alignment, and making of end terminations with suitable aluminium lugs and brass compression glands, complete in all respects as per direction of Engineer-in-Charge. (Havells/Polycab/KEI/or as directed by EIC)