STRUCTURAL REPAIR SPECIAL REPAIR RENOVATION OF SCHOOL BUILDING WATER SUPPLY SEWAGE DISPOSAL REWIRING OF SCHOOL BLDG INCLUDING REPLACEMENT OF ELECTRICAL FITTING FIXTURE AT KV OKHA UNDER GE NAVY PORBANDAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding, and rubbish off the premisess complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified and as directed.

Demolition of RCC Jallies, built in cement mortar etc complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. and rubbishing off the premises, etc. complete all as specified and as directed.

Demolition of cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Taking up or down PVC/ steel tubing of 20/ 25 mm bore and connections complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5sqm but not exc 4sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified and as directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing to store complete all as specified and as directed.

Taking down aluminium windows/ door frames incl shutters (without taking off shutter) complete of size exc 2.0 sqm but n exc 4.5 Sqm area complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise described for of any description complete all as specified and as directed.

Dismantling of brick work /stone boulders built in cement mortar including all quins, arches, pillars etc incl coping etc complete all as specified and as directed.

S&F 2nd class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm not exc 2 Sqm each complete all as specified and as directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 30mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F 300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 150mm long (Length of Bolt in mm) Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type,anodised complete all as specified and as directed.

S&F 100mm Butt hinges(Size of hinges in mm), medium weight, cold rolled, stainless steel, and fixed complete all as specified and as directed.

S&F double body door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring complete all as specified and as directed.

S&F in repairs Aluminium (Extruded Section Body) Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 exc. half brick but not exc one brick as required complete all as specified and as directed.

S&F of mild steel hold fast for fixing wooden frame etc complete complete all as specified and as directed.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint incl Sanding newly tarred or painted surfaces with clean sharp sand complete all as specified and as directed.

S&F standard aluminium section powder coated (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE ) as in frame, shutters for doors, window / ventilators, fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes/wire cloth shall be measured and paid separately under respective item.

S&F aluminium alloy wire cloth , 0.45mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples/ wooden beading complete all as specified and as directed.

S&F 4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square exc 0.5 sq. m in each pane complete all as specified and as directed.

All as above item No 28 but 5.5mm thick sheet glass complete all as specified and as directed.

S&F 4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square n exc 0.5 sq. m in each pane all as specified and as directed

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

M&L for preparing of new wooden surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Pink primer, as approved complete all as specified and as directed.

S&F in repairs 25mm dia stainless steel curtain rod etc. complete all as specified and as directed.

S&F in repairs stainless steel bracket for curtain ord of 25mm dia for fixing in walls etc. complete all as specified and as directed.

S&F in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104 or equivatent 6.5 mm thick all as specified and as directed.

M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on ceiling of concrete surface and finishing the surface even and smooth without usingextra cement complete all as specified and as directed.

M & L for Rendering 15 mm thick in CM (1:4) on stone/concrete surface of external walls finished even & smooth with using extra cement incl using integral WPC etc complete all as specified and as directed. (Note : Integral WPC will be measured separately.)

M&L for preparation of newly plastered surfaces of walls and applying one coat of wall care white putty, 2mm thick and applying two coats of oil emulsion distemper over a coat of wall priming paint complete all as specified and as directed

Preparation of new plastered surfaces and applying two coat of white wash on ceiling complete all as specified and as directed.

M&L peparation of new surfaces of walls soffits, facia roof and applying two coat of Exterior weather proof acrylic based paint over a coat of self primer (100% acrylic) etc all as specified.

Preparation of old plastered surfaces in walls soffits, facia roof and applying one coats of anti fungal weather proof acrylic based paint 100% acrylic all as specified and directed.

M&L for complete removal of existing treatment on walls and applying one coat of wall care white putty, 2mm thick and applying two coats of oil emulsion distemper over a coat of wall priming paint complete all as specified and as directed

M&L for preparation of old painted surface on walls and applying two coats of synthetic oil paint complete all as specified and as directed

M&L preparation of old plastered / unplastered surfaces and applying two coats of white wash on ceiling complete all as specified and as directed

M&L for preparing of old wooden surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint, as approved complete all as specified and as directed

M&L for Preparation of old steel suraces and applying one coat of Epoxy Paint over 10cm width or girth Complete all as specified and directed by Engineer in Charge.

M&L for Machine cut kota stone slab in flooring and window cills any design or pattern 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over & including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado, and pillar laid with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishingover and including 10mm thick plaster in CM (1:4) complete all as specified and directed.

M&L for non-skid ceramic tiles, coloured (of approved shade and design), 7to8mm thick, of superior quality, square / rectangular (area exceeding 0.06 Sqm but not exceeding 0.11 Sqm) joint free, as in floors, etc.set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match shade of tiles laid over & including 15mm thick screed bed in CM (1:4) complete all as specified and as directed

M&L for coloured Glazed ceramic tiles,of size 450x300x 7 to 8mm thick of superior quality fixed on vertical surfaces such as skirting / dado / risers of step etc.,set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles fixed over & including backing coat of 10mm thick plaster in CM (1:4) complete all as specified and as directed.

M&L for Light shade vitrified ceramic tiles, premium quality, coloured (of approved shade and design) area of each tiles not exceeding 0.36sqm, joint free, as in floors and skirtng, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles ,laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for Light shade vitrified ceramic tiles, premium quality, coloured (of approved shade and design) area of each tiles not exceeding 0.36sqm, joint free, skirtng, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles ,laid over and including 10mm thick plaster in CM (1:4) complete all as specified and as directed.

M&L for Outdoor paving tiles of size 300mm x 300mm x 20mm thick , scratch resistant, stain resistant, impact resistant & acid/alkali resistant , to withstand heavy loads and neutral to sun up effect, complete all as specified and as directed. ( Make - 'Endura' series of Johnson or equivalent series of makes approved by GE.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Granite (of any type) tiles 20mm thick in flooring machine cut, bedded and jointed with grey cement slurry over 20 mm thick screed bed or bedding layer in cement mortar (1:4) and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed bed 15mm CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed.

M&L providing precast cement concrete type B0 1:2:4 (12.5mm graded aggregate) and set in CM 1:4, louvres and jallies, 25 mm thick (measured solid), including all mouldings complete all as specified and as directed.

Dismantling water tanks exc 500 but n exc 1000 litres capacity complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Disconnecting existing tanks, exc 500 & n exc 1000 litre capacity setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc and hoisting if required reconnecting and re-fixing in position all as directed.

S&F gun metal globe or gate valves, with iron wheeled head screwed both ends of iron pipes for 25 mm bore pipe fixing in CPVC pipeline by cutting of pipeline and fixing with necessary fitting and solvent complete all as specified and directed.

Supplying and laying of bore 25mm of CPVC pipes SDR 11 including plain CPVC SDR 11 fittings in trenches/walls/ceiling etc complete all as specified and as directed.

Supplying and laying of bore 20mm of CPVC pipes SDR 11 including plain CPVC SDR 11 fittings in trenches/walls/ceiling etc complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed for 25mm bore pipe (Minimum weight-455gms), fixing in repairs, complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (European type) with P or S trap, white colour, fixing bolts, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and as directed.

S & F in repairs Vitreous china wash basin, min size 550 x 400 mm including waste pipe and waste coupling of chromium plated , brackets and cutting for and pinning in ends of brackets or errecting stand but excluding taps, chain and plug complete all as specified and as directed.

S&F in repairs 10litres capacity PVC flushing tank, syphonic action type, high / low level, valveless, with PVC inlet ball valve, PVC flush pipe, float, including taking down / dismantling old unserviceable flush tank (any type) and disposing off complete all as specified and as directed.

S&F in repairs fancy type stainless steel soap dish,fixed to plugs with chromium plated brass screw complete all as specified and as directed.

S&F in repairs PVC connections 15mm size 600mm long with PTMT nuts of length 600mm complete all as specified and as directed.

S&F in repairs toilet paper holder, brass chromium plated fixed to walls with brass screws complete all as specified and as directed.

S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for European / Anglo indian type WC all as specified and directed. Make:- Cera or equivalent

S&F in repairs fancy type Chromium plated towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

S&F in repairs Health faucet (ABS chrome plated) with 1 mtr long flexiable tube & wall hook complete all as specified and as directed.

S&F in repairs 15mm dia stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch , screwed at both ends for iron pipe or for unions complete all as specified and as directed

S&F in repairs Fancy type bib taps, long shank chromium plated cast copper alloy 15mm bore with crutch screwed down and fixed complete all as specified and as directed.

S&F in repairs long shank CP Pillar taps 15 mm dia but fancy type, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for pvc pipe and fixed complete all as specified and as directed.

Taking down/ Demolition of old textile covering form roof (old WPT) complete all as specified and directed.

M&L PCC type B-0. 1:2:4 (12.5mm graded aggregate) as in Padding concrete to over roof slab 40 mm thick mixed with WPC 3% by weight of cement, finished even and smooth with using extra cement complete all as specified and as directed. (WPC shall be measured and paid separately).

Forming Construction joint 30mm deep x 10mm wide filled with non bituminous filler and sealed with PU sealant compound complete all as specified and as directed.

M&L for PCC 1:2:4, type B-1 (20mm graded aggregate) as in coping and kerbs etc mixed with WPC 3% by weight of cement, finished even and smooth with using extra cement complete all as specified and as directed. (WPC shall be measured and paid separately).

M&L for providing water proofing treatment with 4 mm thick APP (Atactic poly propylene) modified bituminous membrane reinforced with non woven polyester mat of weight 180 gm/Sqm as centre core and without multiply layers of polyethylene finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer@ 0.25 Kg/ Sqm over roof an overlap of 100mm & 150 mm shall be provided on side and ends respectievely surface finished complete all as specified and as directed.

Preparation of New/ previously untreated surface of APP membrane and painted with two coat of aluminium paint all as specified and directed.

Supply only integral waterproofing compound complete all as specified and as directed.

Cutting channels, grooves or rebates with or without reinforcement n exc 15cm girth, and trimming surface complete all as specified and as directed.

S&F of non woven geotextile fabric 150gsm over APP membrane with necessary fixing arrangement all as specified and directed.

M&L for 20 mm thick machine pressed PCC tiles 20 x 20cm laid over & including cement mortar screed mortar 15mm thick in CM 1:4 mixed with water proofing compound and jointed, pointed in CM 1:3 mixed and all as per directed.

M&L for mineral fibre false ceiling made out of 600x600x15 mm thick ceiling board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63 mm and cross tee of size 23.50 x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending, bolts, necessary washers, nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr- in- Charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern (Make: Armstrong/Dalken/Chanakya or equivalent)

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation, etc. n.exc 10 sqm on plan and getting out in soft/disintegrated rock complete all as specified and directed.

M/L for hardcore of broken stone or boulders of guage n exc 63 mm , deposited, spread and levelled in layers n exc 15 cm thick and watered and rolled/rammed to true surfaces all as specified and directed.

M & L cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete to be laid in required slope complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even and fair without using extra cement complete all as specified and as directed.

Use of forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' in plinth protection complete all as specified and as directed.

M&L for Reinforced cement concrete type B1 1:2:4 (20mm graded aggregate) in foundation incl rafts,footings,foundation beam plinth beams, roof beams bases for columns etc. basement slabs,under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced cement concrete type B1 1:2:4 (20mm graded aggregate) in columns, pillars piers, posts and struts complete all as specified and as directed.

Formwork to sides of pillars,posts, struts, piers, columns and stanchions for rough finish flat surface of concrete columns square/ rectangular on plan complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/disintegrated rock complete all as specified and as directed.

Removing excavated materials (rock) from the site to a distance exc 250 m but n exc 500m and depositing where directed complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to I.S.1161-1998 grade St-240 complete all as specified and as directed.

S&F Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and as directed.

S&F Plate (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment Gde Fe- 410-w (Gde-E-250) quality-A complete all as specified and as directed.

S&F Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or diameter of neck 16 to 20mm square nut bolt exc 10 cm but n exc 15 cm long complete all as specified and as directed.

M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer complete all as specified and as directed.

S&F of Solid core polycarbonate sheet of extruded finish 10mm thickness as in roof covering in approved color fixed with necessary screw and washer complete all as specified and as directed.

M&L for walling of Porbandar stone masonry well bonded and solidly hearted built in CM 1:6 complete complete all as specified and as directed.

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise area exc 100 sqcm but not exc 250 sqcm etc complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints and suitable size clip fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed.

S&F PVC (SWR) couplers 110mm dia for fixing in PVC SWR pipe complete all as specified and as directed.

S & F CRS steel deformed or twisted bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips Fe 500 complete all as specified and as directed.

M&L CRS TMT bars 6 to 8 mm dia and over cut to length, bent to shape required incl cranking, bending, spirally for hooping for column hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. confirming to Fe500 complete all as specified and as directed.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts/scaffolding complete all as specified and as directed.

Providing and applying two component epoxy resin based moisture intensive "Sikadur-53UF" /BASF /Fosroc for high pressure injection grout with drilling& fixing nozzle at 500 mm centre to centre and as per manufacturer'sspecification including labour, tools, machines etc. all complete. Approx nipple @ 500mm distance & Approx Epoxy injection grout @300g / nipple complete all as specified and as directed.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-in-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20sqm/kg of approved make.

Providing & applying of three component moisture insensitive epoxy mortar "Sikadur-53 UF (Mortar)" / BASF / Fosroc for repair of honey combs, damaged chipped area etc. as per manufacturer's specification including labour,tools, tackles etc complete all as specified and as directed.

Providing and applying polymer based bonding coat of pagel U10 of PIDILITE/BASF/SIKA/FOSROC or Equivalent make on cleaned / washed surface of concrete and applying pre -packed polymer modified repair mortar pagel U10/U40 of PIDILITE / BASF / SIKA / FOSROC or Equivalant as per ASTM / BS standards having comp. strength of 45 MPa. min at 28 days, Adhesive bond not less than 02 MPa, Chloride content less than 0.05% & Flexuural Strength of 8mpa min at 28 days in all respect as per manufacturer's recomendations and relevant codes, including the required material, manpower, Application and tools & tackles complete all as specified and as directed.

Chipping and removal of spalled concrete, cracked, porous and weak concrete up to a depth of the reinforcement rods or depth of carbonation whichever is deeper and cleaning of the reinforcement bars and exposed concrete to remove scales by chipping, wire brushing, emery sheets etc to enable the measurement of reduced dia of the bar, application of zinc primer to the reinforcement on all sides of the reinforcement and application of epoxy bonding agent to exposed old concrete surfaces. The job shall be carried with contractors own pneumatic chipper / manually with all required resources, tools and tackels up to the satisfaction of EIC. payment towards application of zinc primer and epoxy bonding agent shall be paid in respective item rate of contract complete all as specified and as directed.

Providing and fixing hard drawn steel wire fabric of size 25x25mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge.

Providing and plaing in position Micro - Concrete as per relevant ASTM / BS / IS having comp. strength of min 45 mpa at 2 days of make PIDILITE/ BASF/SIKA/FOSROC or equivalent in columns and beams, which shall be pre-packed single component, chloride free, non shrink, free flow, self compacting and mixed as per manufacturere spacification, including required leak proof shuttering, pre - soaking of substrate, manual application or pumping, manpower and tools & tackles complete all as specified and as directed.

Demolition and breaking up drain pipes 150mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

Construction of RCC Septic tank conventional type designed to carry sewage and sullage water, excavation in soft rock ,PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 100 Users as per TD Drg No TD/2007/10 Sheet No 1/4 to 4/4 complete all as specified and directed.

Construction of Soakage well complete including excavation in soft/disintegrated rock, foundation in PCC 1:3:6, wall of honey combed and solid in M-30 (Design mix) concrete incl. intercepting chamber, screen chamber, brickwork in CM 1:4, RCC cover slab in M-25/RR masonry / filling with bricks bats, complete of size 2.4 m dia and 4.5 m effective depth as per TD Drg No TD/94007 Sheet No 1/1 complete all as specified and directed.

M&L for Plain Cement Concrete1:3:6 (type C-2) using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for precast RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in cover slab set in CM 1:4 and finishing all exposed surfaces of concrete even and fair without using extra cement including necessary form work complete all as specified and directed.

M&L for plain cement concrete PCC 1:3:6, (type C2) using 40mm graded stone aggregate for bed to drain pipes including packing under and haunching against the sides of pipes with concrete after they are laid and tested for 150mm dia drain pipe complete all as specified and directed.

M&L for reinforced concrete pipe of 150mm bore of pipe, class NP-3, laid and jointed with collars complete all as specified and directed.

Supply and fixing of Split AC 2 ton 5 STERwI -Fi Twin cool Inverter Copper,PM 2.5 filter,2020 model completed all as specified and as directed.Make :- Panasonic Cat No - CS/CU-NU24WKYW/Carrier/Blue star or equivalent make approved by GE.

Supply and fixing of water cooler electric driven (single phase), having approx storage capacity of 120 litre and nominal cooling capacity of 60 Litres per hour Make :- Voltas Cat No - 60/120 FSS-SPC/Blue star/LG or equivalent make approved by GE.

Supply and fixing of voltage stabilizer 4A capacity 150-285V working range complete all as specified and as directed.Make :- V-Guard Cat No - VND 500 or equivalent make approved by GE.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down main switch /DB with MCCBs/MCBs of any capacity/size etc and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down Unserviceable sub main wiring of any Size and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M/L and Repair/Replacement for Sub Main Wiring with 2x4 Sqmm PVC insulated copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVC conduit with all fittings and accessories including PVC box (IS-14772) and 1x4 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly complete all as specified and directed.

M/L and Repair/Replacement for Sub Main Wiring with 2x6 Sqmm PVC insulated copper cable 1100 volts grade stranded copper conductor cable drawn through and including PVCconduit with all fittings and accessories including PVC box (IS-14772) and 1x6 Sqmm stranded PVC unsheathed copper cable for earth continuity connected to common earth dolly complete all as specified and directed.

M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn with PVC conduit with all accessorie and PVC Box of suitable size including 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity connected to common earth dolly for mounting of fittings such as switch, socket all as specified and directed.

(a) One light point/bell point controlled by one switch complete all as specified and directed.

(b) One ceiling fan /Exhaust fan controlled by one switch & regulator complete all as specified and directed.

(c) One 3 pin socket point 5 Amps on independent board complete all as specified and directed.

(d) One 3 pin socket point 5 Amps on same board complete all as specified and directed.

All as per srl item no 138 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed (FRLS) wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified & as directed.

Supply and Repair/Replacement of ceiling rose surface backelite 65x50 mm having 3 terminal complete all as specified and directed.

Supply and Repair/Replacement of Modular white cover plate with frame 3 modules complete all as specified and directed.

Supply and Repair/Replacement of Modular white cover plate with frame 8 modules complete all as specified and directed.

Supply and Repair/Replacement of white cover plate with frame 12 modules Combined Plate - Coral complete all as specified and directed.

Supply and Repair/Replacement of for Modular switch 1 way 6 Amps, 1 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of for Modular switch 1 way 16 Amps, 1 modules 230 volts Complete all as specified and directed.

Supply and Repair/Replacement of Modular socket 6A, 2/3 pin combined, 2 modules 230 volts complete all as specified and directed.

Supply and Repair/Replacement of Modular socket 6A/16A, 2/3 pin combined, 2 modules 230 volts complee all as specified and directed.

Supply and fixing of DBOXx MCB Protected Socket With sheet steel Enclosure single pole 20 Amp with 3 pin plug top for AC connection from Socket point to stabilizer complete all as specified and as directed. Make :- Havells Cat No- 20 A MCB DBOXX COMBO or equivalent make approved by GE.

Supply and Repair/Replacement of five step fan Modular regulator 2 module 230 volts complete all as specified and directed. Make : Havells Cat No :- AHLRFHW005 or equivalent make approved by GE.

S&Fof ceiling fan high speed 1200mm sweep, Ivory in colour and connecting up including provision of 3 core flexible copper wire of size 1.5sqmm from ceiling rose to ceiling fan complete all as specified and as directed Make: Polar / Bajaj / Crompton Greaves/Usha or equivalent make approved by GE.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 450 mm sweep with louver complete all as specified and as directed.Make :- CG/Bajaj/Usha or equivalent make approved by GE.

Supply and Repair/Replacement of batten LED luminaire, 20W integral, sleek extruded polycarbonate LED channel, with inbuilt electronic driver / control gear, bi-pin holders, connector blocks, etc. with all connected accessories internally pre-wired, including 20W LED bulb connecting lead of 3 core 1.5sqmm flexible copper wire 1.5sqmm from ceiling rose to fitting complete all as specified and as directed Make: Bajaj Cat Part No. BCLSB 20WH or equivalent make approved by GE.

Supply and Repair/Replacement of Building street light fitting Endura pearl 20W LED lamp new genaration energy saving & environmental friendly long life made up of pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP65 protection and impect resistance of IK07,with suitable of GI pipe (light grade) bracket and clamps,nut bolts are fixed on wall/post and all as required and directed Make Havells cat no ENDURAPEARLSL20WLED757SASYTOPC or equivalent make approved by GE.

M&L and Repair/Replacement of fabrication of Wooden Box as suitable for SPN 12 way DB to be covered as per existing including suitable mason work,surface finishing as per original and locking system complete all all as specified and as directed.

M&L and Repair/Replacement of fabrication of Wooden Box as suitable for TPN DB to be covered as per existing including suitable mason work,surface finishing as per original and locking system complete all all as specified and as directed.

Supply and Repair/Replacement TPN and vertical loadline 4 way double door suitable for G frame MCCB DBs are fitted with Bus Bars, Neutral Links, Blanking Plates, IP-43,230V having earthing terminal,concealed in wall including making electrical incoming and outgoing connection with lugs/thimbles and finishing as per original,painting existing colour complete all as specified and as directed.Make :- Havells Cat No :- DHDLVDRWGOFO04 or equivalent make approved by GE.

Supply and Repair/Replacement of MCB DB Single pole and neutral 12 way double door IP-43,230V having earthing terminal,concealed in wall including making electrical incoming and outgoing connection with lugs/thimbles and finishing as per original,painting existing colour complete all as specified and as directed.

Supply and Repair/Replacement for 100 AMP, MCCB 4 pole 415 volt, AC 50 Hz, 4 pole, 10 KA with adjustable thermal and fixed magnetic setting system against over load and short circuit conditions incl neutral adjustment (Ics=100% of Icu) of capacity suitable of Existing panel board for replace of unserviseble MCCB complete all as specified and directed. Make : Havells Cat No :- IHLE1ABF0100# or its equivalent of Legrand/L&T or equivalent make approved by GE.

Supply and Repair/Replacement of MCB TPN 40 Amps, 10 KA breaking capacity , C Curve suitable for 230 V, 50 Hz AC Supply complete all as specified and directed by Engineer - in - Charge.Make:- Anchor Cat No- 98039 or equivalent make approved by GE.

Supply and Repair/Replacement of MCB TPN 63 Amps, 10 KA breaking capacity , C Curve suitable for 230 V, 50 Hz AC Supply complete all as specified and directed by Engineer - in - Charge.Make:- Anchor Cat No- 98040 or equivalent make approved by GE.

Supply and Repair/Replacement of RCCB 63 Amp FP 100 mA,Four pole,240V,50Hz,IP-20,protection against earth fault/leakge current conforming IS-12640-12000,IEC 61008-1 complete all as specified and directed by Engineer - in - Charge.Make:- Anchor Cat No- 98207 or its equivalent of L&T/Havells/Legrand or equivalent make approved by GE.

Supply and Repair/Replacement of MCB SP 6-32 Amps,10 KA breaking capacity 'B' Curve suitable 230 V,50 Hz for lighting and other domestic load complete all as specified and directed by Engineer - in - Charge. Make:- Havells Cat No- DHMGBSPF006-032 or equivalent make approved by GE.

Supply and Repair/Replacement of MCB SPN 40 Amps,10 KA breaking capacity 'B' Curve suitable 230 V,50 Hz for lighting and other domestic load complete all as specified and directed by Engineer - in - Charge.Make:- Havells Cat No- DHMGCSNF040 or equivalent make approved by GE.

Supply and fixing of (SKYLUX LED) 30 Watt natural white Efficient LED recessed 2x2 luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free soft illumination, White powder coated CRCA housing with LEDs. Seamless front frame with at white high transmission acrylic cover. fixing on fall ceiling with wiring to light fitting complete all as specified and as directed. Make :- Bajaj Cat No -BZRSQL 30W GZi WH or equivalent make approved by GE.

Supply, Installation, Testing and Commissioning of Electric driven Fire pump suitable for automatic operation and consisting of following: complete in all respect as required. a) Horizontal, centrifugal, end suction pump to ensure a minimum pressure of sq.cm. at highest and farthest outlet at specified flow . head conforming to IS standards. b) Squirrel cage induction motor with suitable HP with synchronous speed 3000 RPM, Suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, Conforming to IS standards. c) Common Base plat for Pump and motor and coupling, coupling guard and other accessories as required for complete installation of pump set. d) Suitable cement concrete foundation with cement concrete plaster complete with anti-vibration arrangement.

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / FIRE PIPE MS C CLASS including accessories such as MS bracket, U clamps with Anchor fasteners, tees / elbows / reducers / couplings / unions / bends / flanges / Wrapping coating / excavation backfilling etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing after Installation etc. as per specifications complete as required.

a) 110 mm dia

b) 80 mm dia

Supply, installation, testing and commissioning of Butterfly valve (PN 1.6) with flanges, nut bolts, gaskets complete as required.

a) 100 mm dia

Supply, Installation, Testing and Commissioning of Dual plate Check valve (PN 1.6)

a) 100 mm dia.

Supply, installation, testing and commissioning S.S. Single Headed Fire Hydrant Valve with 80 mm N.B. flanged inlet, 63 mm dia female instantaneous outlet type complete all all as specified and as directed.

Supply, Installation, Testing and Commissioning of Weather proof Standard FRP Fire Hose Cabinet wall mounting type complete all all as specified and as directed.

Supply, installation, testing and commissioning non-percolating rubber reinforced lined fire Hose pipe 63 mm dia and15 mtrs long. The hose shall be rated for burst pressure with male & female coupling bound & riveted to hose pipe with wire complete all all as specified and as directed.

Supply, Installation, Testing and commissioning of 63 mm dia instantaneous pattern SS short branch pipe, 20 mm dia nozzle complete all all as specified and as directed.

Supply, installation, testing and commissioning of First Aid Hose Reel equipment conforming to IS:884 comprising of hose reel drum, shut off nozzle, Rubber hose reel tubing as pe painting, Manual fix type with fixing bracket, anchor fastener, bolts & nuts etc. complete all all as specified and as directed.

Supply, installation, testing and commissioning of SS Ball Valve 25mm dia complete all all as specified and as directed.

Supply, installation, testing and commissioning of Two Way Fire Brigade Inlethaving 63 mm dia inlet with blank cap and chain with necessary fittings, flanges, nut bolts etc. complete as required.

Supply, installation, testing and commissioning of 6kg powder fire extingusher with ISI marked / TAC approved fitted with required accessories including wall suspension brackets complete all all as specified and as directed.

Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets complete all all as specified and as directed.

Providing, fixing AUTO GLOW photo luminescent Signage's as per IS standard in Block / Small Letters on rigid sheet with necessary wall or Ceiling fittings as Specified Sizes -Fire lift: size: 4" X 12" complete all all as specified and as directed.

Supply, installation, testing and commissioning of fire alarm syestem with penal ,callpoint, hoooter,cabling complete all all as specified and as directed.

Auto system pump and supply in installation complete all all as specified and as directed.

NOC Charge for Fire Fighting System complete all all as specified and as directed.

Supply and fix GI pipes medium grade 25 mm bore with all fittings /GI bends complete fixed to wall /ducts and ceiling or laid in floors as specified and directed

All as per item No 183 above but 50 mm bore complete all all as specified and as directed.

All as per item No 183 above but 80 mm bore complete all all as specified and as directed.

Supply and fix in repairs Gun metal globe or gate valve 25 mm bore with iron wheel head screwed both end for iron pipe and fixed all as directed.

All as per item No 186 above but 50 mm bore.

Construction of valve pit 600 mmX600 mmx600 mm internal dia mensions including PCC foundation 1:3:6,brick work in class B bricks,coping in PCC 1:2:4,cover and frame in angle iron 40X40X6 mm with 2mm thick cover etc complete with locking arrangement all as specified and directed at site.

Construction of valve pit 1000 mmX1000 mmx1000 mm internal dia mensions including PCC foundation 1:3:6,brick work in class B bricks,coping in PCC 1:2:4,cover and frame in angle iron 40X40X6 mm with 2mm thick cover etc complete with locking arrangement all as specified and directed at site.

Supply and fix Sluice valve 80 mm bore confirming to IS 13095 CI body PN 1.6 ISI mark complete with nut, bolt and flange reqd for fixing of valve including dismantling/taking out old, unserviceable items for taking credit complete all as specified and directed.

Excavation in trenches in Hard/ dense soil n exc 1.5 m wide and n exc 1.5 m deep and getting out, required to repair the leakage of CI pipes & fittings,including demolition of PCC/road cutting and making good to match the existing surface after repair works complete all as specified and directed.

Returning, filling in including spreading levelling, watering and well ramming in layers n exc 25 cm using hard dense soil obtained from excavation, complete all as specified and directed

Removing surplus hard dense soil obtained from excavation/ demolition exc 250m but not n exc 500m and depositing at places allowed by BMC all as specified and directed.

Taking down Old unserviceable GI pipe at in any position for repairs and taking credit all as directed for 25 mm bore size pipes/fitings etc :-

All as per item No 194 above but 50mm bore

All as per item No 194 above but 80mm bore

J J ENTERPRISES

Harsh Infrastructure