COMPLETION OF KANNAMBRA SHORT STAY HOME - INTERIOR WORKS ,PALAKKAD

Amount

Short Stay Home

od8948/2021_2022 : Providing fixed partition:- Providing fixed partition made with marine plywood 12mm & 18 mm thick as structure, both side paneled with 4mm veneer including exposed area finished with wood filler, sanding sealer and final coat with MRF poly weather mat all cost of materials and labour charges.

od9118/2021_2022 : Door with Outer frame : The doors with 19 mm marine plywoods as structure,both sides with 12 mm marine plywood and panalled with 4mm thick 4mm veneer including exposed area finished with wood filler,sanding sealer and final coat with MRF poly weather mat all cost of materials and labour charges.

od8976/2021_2022 : Providing counter :-Providing counter with marine plywood as structure, exposed area finished with 4 mm veneer, sained with wood staainers, wood filler, Sanding sealer and final 1 coat with MRF polymat finish . The counter contain utility drawer. Key board and storage shelter including provision for CPU stand, The drawer with lock SS handles the inner side painted with putty, wood primer and finally satin enamel including all cost of materials and labour charges etc complete.

od8978/2021_2022 : Wall Panneling :- Wall Panneling with 19mm marine plywoods as structure,both sides with 9mm marine plywood and panalled with 4mm thick venesian, the edges finished with wooden reapers. The exposed areas stained with wood stainers, sealer and final coat with PU mat.the door contains mortice lock, ss handles automatic door closer, door stopper and lower bolts including all cost of materials and labour.

12.45.1 : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

od8984/2021_2022 : Providing file storage :-Providing File storage made with marine plywood as structure,backwith pre laminated MDF and exposed area finished with 4mm veneer.The doors with auto close hinges,licks and handles.The exposed areas sained with wood stainers,wood fillers,and sanding sealer and final coat with MRF poly mat finish including all cost of materials and labour charges

od8985/2021_2022 : PLAT FORM :_Providing Plat form :-Providing plat form made with 18 mm marine plywood as structure and exposed area finished with suitable carpet including all cost of materials and labour charges

od8987/2021_2022 : Venesian blinds: The venesian blinds for windows made with aluminium channel fixtures, canvas leaf with fiber chair bottom and nylon string for leaf sliding including all cost of materials and labour (per sqm).

od9359/2021_2022 : Sofa set :_Providing sofa set :-Providing plat form made with 18 mm marine plywood as structure and exposed area finished with suitable carpet including all cost of materials and labour charges

od9356/2021_2022 : Supplying and fixing good quality wall paper etc. complete

13.47.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). Make: Asian, Berger, Nerolac or eq. in the order of pref.

13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

od9126/2021_2022 : Providing Wall rack :-Providing wall rack made with tubular structural pipe 50mm X 25 mm as structure, exposed area finished with good quality Bamboo Beadings, platform made with 12 mm glass The exposed areas sained with wood stainers,wood fillers,and sanding sealer and final coat with MRF poly mat finish including all cost of materials and labour charges

6 nos of TV 32''

Note :1 All materials, Items, Equipment shall be best branded items with IS and approved by client/KEL

2:Rate should be inclusive of installation, testing and commissioning cost for all items

3.Rate should be Exclusive of GST.

4.Work should be executed as per DSR/PWD/Irrigation Dept. specification and direction of Engineer at site.

P MOHAMMED