Providing Paintings and Replacement of Damaged doors for Experimental Lab, ANRF - PAIR Project Central facility at DST - PURSE Centre in SVU Campus, Tirupati

Removal of teak wood joinery / steel door , window , ventilator etc., carefully, stacking the materials usefull for reuse and clearing away all the debris to the low level areas around the building / site with initial lead and lift etc., complete for finished item of work and as directed during execution.

A) Area Not Exceeding 3.00 Sq mtr

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with smooth finishing including cost and conveyance of all materials like cement, sand, water etc., to site and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work (APSS No. 901 & 904) for internal surfaces of brick walls and contigeous RCC surfaces.

Supplying and fixing in position of best - Indian teak wood framed and flush type shutter door of size 1.05 x 2.05mts without ventilator head in Single leaves using main frame of section 125x100mm alround without threshold plate and shutters using 35mm thick flush door shutter, solid bond wood block board type with commercial ply on both faces confirming to IS:2202, including cost of 6nos of M.S 'Z' hold fasts - 300mm long of 40x40x5mm size, 3 nos of P.C butt hinges of 125mm size, 1No of aluminium aldrop of 300mm size, 1No of Al-latch of 250mm size, 2nos of aluminum handle of 150mm size, 1 Nos of heavey duty door stopper, 1 nos of Al-tower bolts of 200mm size, providing chauket painting for door frames & face of wall, including cost & conveyance of all materials, labour charges, incidental charges, H.O.M of T & P, sales & other taxes etc., complete for finished item of work as per approved design and as directed during execution.

Throughly removing the white wash or colour wash wall surfaces by steel wire brushing and /or scraping, sand papering, and preparing the wall surface smooth ;inlcuding necessary repairs to scraches , providing and applying synthetic plaster of putty or cement based putty of average 1-2mm thickness over plasted wall surfaces to prepare the surface even and smooth after throughly brushing the surface to remove all dirt and remains of loose powdered materials, appliane memory paper , sanding the surface, clean and wipe off loose dust, applying / knifing paste filler by putty knife / muslin pad, Air dry for 2 - 3 hours , sand with 180& 320 No. sand paper for the surface preparation, Painting with 2 coats of plastic emulsion paint of approved brand and shade over one coat of interior grade cement primer ( total 3 coats ) after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls.

Providing painting for old Iron work two coats using first class synthetic enamel paint of approved manufacture and desired shade, including cost and conveyance of all materials , brushes, sand papers, labour charges, incidental charges etc., complete for finished item of work confirming to APSS and as directed during execution.

Providing painting for new teak wood joinery two coats over one coat of wood primer using first class synthetic enamel paint of approved manufacture and desired shade, including cost and conveyance of all materials , brushes, sand papers, labour charges, incidental charges etc., complete for finished item of work confirming to APSS and as directed during execution.

Painting to existing old plastic emulsion painted walls with 2 coats of plastic emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls.