SPECIAL REPAIR TO BLDG NO T 557 OFFICE BLDG IN ZONE L AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Dismantling of AC sheet corrugated / CGI corrugated sheets in roofing any gauge and any thickness including ridge, valley/gutter etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding,(but not backing) removing serviceable tiles to store and rubbish off the premises.

Demolition of brick work built in cement mortar.

Dismantling timber boarding of any description fixed in any position.

Dismantling wall / ceiling board (fibre pulp insulation) or insulation boards any thickness including cover fillets

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with, water etc.

Taking down chowkat with shutter/without taking off shutter from the frame n exe 1.50 each

All as per item No 9 above but exe 1.50 sqm & n exe 4 sqm each -ditto-

S&F Plain, solid, straight chowkats in 2nd class hard wood and framed rebates on the solid rounded or chamfered put together with glue pinned at joints including making rebate for fixing second shutter as per site requirement.

S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides

M&L mild steel work such as hold fasts, hooks, clamps etc and similar work conforming to Fe 290. Gde-165

Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brick.

M & L for Painting in wooden surfaces with two coats synthetic enamel paint over a coat of pink primer incl preparations over 10 cm width or girth.

S&F 125 mm size Butt hinges, heavy weight, cold rolled mild steel with galvanised MS sheet hinges pin anodised.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized.

S&F 200mm long aluminium anodized barrel tower bolts of extruded section.

S&F Mild steel sliding door bolts of size 300mm length of bolt, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate & two on staple plate.

M&L mild steel work such as grills, guard bars etc and similar work conforming to Fe290 GDE E-165

S&F aluminium anodised two/three track sliding window frames of size 92 X 45.50 X 1.50mm thick and shutter frame of size 40 X 18 X 1.55 mm with rubber gasket, beading and locking arrangement including making good to the disturbed portion complete stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless wire staple and fixed 5.5mm thick tinted glass with necessary rubber beading gasket etc all as specified and directed by Engr-in-charge

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified.

M&L for providing 25mm thick cement concrete type B-1, 1:2:4 using (12.50 mm graded stone aggregate) as in flooring finished rough without using extra cement and mix with water proofing compound complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L 15 mm thick screed bed or bedding layer of mortar in cm(1:4) for laying floor tiles.

Material & Labour 10mm thick screed bed to wall in cm (1:4)

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors, set & jointed in neat cement slurry & pointed with white/coloured cement to match

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm but in skirting, set & jointed in neat cement slurry & pointed with white/coloured cement to match

M&L non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.06sqm but not exc 0.11sqm in floors, set & jointed in neat cement slurry & pointed with white/coloured cement to match

M&L for glazed and coloured ceramic (Joint free) tiles (300X200mm) 7mm thick, finish as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in cement mortar 1:3 all as specified and directed.

M&L Rendering 15mm (cm 1:4) thick on fair faces of brick work or concrete surfaces with using extra cement complete all as specified and directed.

M&L 10 mm thick rendering in cm (1:6) on other than fair faces of brick work finished even & smooth without using extra cement complete all as specified and directed.

M&L for 2 coats of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces n.exe 10cm width or girth including preparation or new surfaces.

M&L for 2 coats of synthetic enamelled paint over coat of red oxide zinc chrome on steel surfaces n.exe 10cm width or girth including preparation old painted surfaces.

M & L complete removal of internal wall finishes by scrapping down and preparation of plastered or unplastered surfaces by applying 3mm wall care putty and applying two coats of oil bound distemper over a coat of primer on new/old plastered surfaces .

M&L applying two coats of weather coat on old / new plastered surfaces of wall over a coat of primer after applying a thin layer of wall care putty including removal of existing treatment and preparation of old decorated surfaces to receive paint complete all as specified and directed Make Asian(Royal), Berger (luxol silk splender), ICI (dulux velvet touch)

M&L for 4mm thick asbestos cement plain building boards, fixed to MS framework with screws including preparation of new surfaces and applying three coats of white wash in ceiling complete all as specified and directed.

S&F joist, channel, angle or tee section fixed independently without connecting plates etc (cut to ordinary lengths i.e within 20 mm of the length indicated) conforming to Fe-410 Gde E-250

M&L for 2 coats of synthetic enamelled paint over a coat of red oxide primer on steel surfaces n.exc 10cm width or girth including preparation of new surfaces.

S&F 2nd class Hard wood 20 mm thick boarding planed both side with butt joints fixed with nails in any situation

M&L 15mm thick rendering in cement mortar (1:3) on concrete surfaces with integral water proofing compound @ 3% by wt of cement, (Note: Water proofing compound measured & paid separately) finished even and fair.

S&F Fe-410-W(Gde-E-250) quality-B roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,chanel or flat sections) including distance pieces, cleats etc.

M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:6

M&L Brick work with sub class B bricks straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 1000 Ltr capacity,ISI Marked complete all as specified.

S&F 20mm Gun - metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for unions and fixed .

S&F 25mm for ball valve brass high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed.

Taking up or down steel tubing 20mm and connection, including cleaning for re-fixing or removal to store all as specified and directed.

Taking up or down steel tubing 15mm and connection, including cleaning for re-fixing or removal to store all as specified and directed.

S& F GI Tubing medium grade fixed to wall,15mm bore all as specified and directed.

S&F 20mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

S&F in repair oval type decorative WHB with pedestal including 450 mm length PVC connection pipe 15mm size with PTMT nuts capstan heads, 15 mm bore pillar tap fancy type cast copper alloy capstan head , CP grating etc, complete all as specified and directed . Make : Hindware/Parryware/Somany

S&F 20mm angular stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed .

S&F for flexible PVC waste pipe for using wash basin/kitchen sink 32mm size length N.Exc 1.0Mtr fixed with waste coupling all as specified and directed.

S&F for CP waste coupling in wash hand basin all as specified and directed.

S&F CP Soap dish complete all as specified and directed.

Supply & Fix in repairs vitreous china squatting pan " Orissa Pattern" size 580 x 440 mm white with integral foot rest including provision of lime concrete bedding (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device.

S&F in repairs 10 Ltr capacity PVC valve less, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes

S&F in repairs tubular towel rail brass chromium plated, 20mm dia, D type 60 cm long between flanges.

S&F 15mm bore fancy type chromium plated angle valve one way all as specified and directed. (Make - Cera/Prayag )

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. ( minimum weight 105 gms)

S&F 15mm bore health faucet chromium plated incl all accessories as specified and directed ( Make - Cera/Prayag )

S&F in repairs brass CP two way bib tap of 15mm dia.

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. ( Minimum weight 60 gms )

S & F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe ) urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement ; flush pipe, grating and union for discharge pipe complete all as specified and directed. ( Make - Cera/Prayag/Parryware/Hindware )

S&F in repair vitreous china urinal, full stall type, size 315x375x620 against wall in cement mortar (1:2) securing urinal to plugs with screws complete fittings all as specified and directed. ( Make - Jaquar/Cera/Prayag/Parryware/Hindware )

S&F in repair chromium plated valve auto closing system with built-in control cock & wall flange with Spreader for urinal with CP pipe of suitable length and dia complete all as specified and directed. ( Make - Jaquar/Cera/Prayag/Parryware /Hindware )

S&F in repair chromium plated toilet paper holder complete all as specified and directed. ( Make - Jaquar/Cera/Prayag/Parryware /Hindware )

S&F pvc connector 15mm size with PTMT nuts of length 600 mm .

S&F 15mm bore stop valve fancy type, chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. (Make - Cera/Prayag )

S&F 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes

S&F towel ring chromium plated complete all as specified and directed. Make : - CERA; Prayag; Hindware; Parryware or equivalent make.

Schedule'A' Part-II: E&M works

Taking down carefully to existing copper/Aluminium point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified.

Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 1.5 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping (ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated Bakelite sheet(HYLEM ) top cover along with copper earth wire PVC insulated & unsheathed multistranded(FRLSH) copper conductor cable of size 1.5sqmm as continuous earth wire connected to common earth and earth dolly complete all as specified for the following type:-

One light / Fan / Exhaust fan / Bell point controlled by one way switch 6 Amp .

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin 5 Amp socket out let controlled by one switch on independent board

Point wiring for Power point controlled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl PVC casing and capping(ISI Mark) with all accessories including providing sunk cast pressed steel terminal boxes off size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated Bakelite sheet(HYLUM BRAND) top cover along with copper earth wire PVC insulated & unsheathed multistranded(FRLS) copper conductor cable of size 2.5 Sam as continuous earth wire connected to common earth and earth dolly complete all as specified and as directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amps, 240 Volts complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing socket outlet 2 in 1, 3 pin, 6 Amp piano complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing socket outlet, 2 in 1, 3 pin 16/15 Amp, piano flush type complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Material & labour for lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing fan regulator 100/120 watt step type AC 220 volts complete all as specified and as directed Make : Anchor cat no 14501 or equivalent approved make of Havells.Legrand /Schneider

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

S&F as in replacement LED building security light 30 watt, 230V, 3000 lumen output complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl dismantling taking down unsv fitting any type all as specified and directed. Make- Havells cat part No.ENDURACITYLITEPLATPLUSSL30WLED757SASYBOPC or equivalent approved make of Crompton/Philips/Halonix/Bajaj

S&F MAXOLED (TUBE) 20 Watt LED tube with single side connection, 20 Watt LED 6500K, 2000 lumen output and MAXOLED BATTEN - for T8 Retro Lamp (G13) ultra bright glass sheet glare free, wide angle, single side connection retrofit LED tube with G13 lamp suitable for maxoled LED tube , 230 Volts, 4 feet long , complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos all as specified and directed. Make-Havells cat part No. Tube :- LHLDEFXD5L8R020 and BATTEN Cat Part- LHFXCEP1TNNW020 or equivalent approved make of CG/Philips/ Bajaj

S&F wall mounted LED mirror light fitting 1x09 Watt,240 volt, 900 lumen output, white polycarbonate housing and integrated electronic driver, prewired complete in all aspect all as specified and directed. Make Havells cat part No LUMILNEBS9WLED865SPCWH

S&F LED Adore 10 watt B-22 CDL Ball Lamp, 6500K ,1000 lumen output (Pin type), 230V, PF not less than 0.85 (min) incl . Make-Havells cat part No. LHLDERUEML8X010 or equivalent approved make of CG/Bajaj/ Philips .as specified and directed.

Supply and fixing bell push piano type one way 5/6 Amp,240 volt sinle pole complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fix bell AC 240 volt, single pole 50HZ complete all as specified & directed. Make : Havells/Anchor/Legrand/SSK

Supply and fixing MCB, single pole 'B' series having braking capacity 10 KA, 6 to 32 Amp, 240 volts, complete all as specified & directed. Make : Legrand/Schneider/Havells

Supply & Fixing MCB SPN having braking capacity 10 KA, 35-60 Amp, 240 Volt 'C' Curve complete all as specified and directed. Make : Legrand/Schneider/Havells

Supply & Fixing sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, 240 Volt . all as specified and directed. Make : Legrand/Schneider/Havells

Supply and fixing as in replacement MCB DB Vertical TPN 4 way (double door) incomer including bus bar neutral link, earth bar and din rail, recessed will wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. Make : Havells cat part No DHDLVDRWGOFO04 or equivalent approved make of Legrand/Schneider/L&T

M&L for making hole in brick masonry wall including cutting in wall and making good by plastering and distempering as per the existing internally and externally complete all as specified.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC casing capping/PVC conduit size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces all as specified and directed. Make of wire : Finolex/Havells/Polycab/Rallison/Plaza. NOTE: (a)Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Hanging or Refixing of Ceiling Fan any size Including provision of suitable flexible cable as required complete all as specified and directed.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete as specified and testing on completion complete ass as specified and directed .Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc complete all as specified and as directed.

M/s Amrit Gope

SHRI RAJESH DEY