1601001002/AV/281941

Amount

TAKE A BREAK

Portland cement

Coarse sand

Sundries

Laterite stone of size 35x20x20cm

Stone aggregate(single size): 40mm nominal size

stone aggregate(single size): 20mm nominal size

Hire charges of concrete mixer 0.25 to0.40 cum with hopper

Vibrator (Needle type 40 mm)

Structural steel such as tees, angles, channels and R.S. joists

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75)

Beam clamp 300-380 mm (450-1070 mm)

Wall from panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M. S. tube 40 mm dia

Wall from panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 m long

Column clamp 450x1070mm

Prop 2m (2-3.5m)

Average rate of mild steel rounds bars for reinforcements

Adjustable span ESO+SI (2.35-3.40)

Stone aggregate (single size) :10mm nominal size

Fine sand (zone IV)

Deharadun white lime

Plasic emulsion paint

Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement

Black plastic seat (solid) with lid C.P. Brass hinges and rubber buffers

Vitreous China pedestal type water closet

Flushing Cistern P.V.C 10lts capacity (low level) (white) (with fitting, accessories and flushing pipe)

White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS: 2556

P.V.C automatic flushing cistern 5 lts capacity

Flush pipe with union spreaders and clamps all in C. P. brass for double stall

C. I. trap for standard urinal with vent arm with operating and other couplings in C.P. brass: 50mm dia

Vitreous China flat back wash basin 630x450 mm

15mm C. P. brass tap

C. P. brass waste 32mm

C. I. bracket forwash basin and sinks

Rectangular shape 453x357 mm mirrorwith plasic moulded frame

Hard board 6 mm thick

Rawl plug 50 mm (designation 10 nos)

Chromium plated brass scews 25 mm

PTMT - Towel rail (600 mm)

Second class teak wood in scantling

P.V.C pipe 15 mm outer dia. 12kgf/cm2

PVC pipe 25 mm outer dia. 12kg cm2

PVC pipe 40 mm outer dia. 10kg cm2

PVC pipe 75 mm outer dia.6kgf/cm2

PVC pipe 110 mm outer dia.4kgf/cm2

PVC bend 75 mm dia

PVC elbow 110 mm dia

PVC 45 degree Elbow 110 mm doa

PVC Bend 110 mm dia

PVC vent cowl 110 mm dia

PVC end cap 110 mm dia

Vitrified floor tile 60x60 cm

High polymer modified quick set tile adhesive

48 mmx40 mmx1.50 mm thick factory made door frame of PVC extruded sections in white, grey or wooden finish

24 mm thick factory made shutters with styles, rails and panels of PVC extruded sections in white,grey or wooden finish

Second class teak wood in planks

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Bright finished or black enameled mild steel butt hinges 100x58x1.9mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50mm

Bright finished or black enameled mild steel screws 40mm

Bright finished or black enameled mild steel screws 20mm

Mild steel round bar above 12mm dia

Flats up to 10 mm in thickness

Polyethelene water storage tank with cover and suitable locking arrangement

Bright finished or black enameled mild steel butt hinges 125 x 65 x 2.12 mm

Bright finished or black enameled mild steel screws 50 mm

Oxidised mild steel tower bolt (barrel type) 250x10mm

Oxidised mild steel screws 30 mm

Anodised Aluminium handles 125 mm with plate 175 x 32 mm

Brass bib-cock-15 mm dia

Brass full way valve with C.I.wheel (screwed end)25 mm dia

C.P. Brass angle valave15mm

PTMT - Soapdish/holder 138x102x75 mm

G.I pipes 50mm dia

Stone aggregate (single size) :06mm nominal size

Interlocking C.C.paver block (60 mm thick, M-30)

Rolling shutter made of 80x1.25 nn machine rolled laths

Top cover for rolling shutters 1.25 mm thick

27.5 cm long wire spring grade no 2 for rolling shutters

Mild steel tubes hot finished welded type

Welding by electric plant

Mangalore tiles 20 mm thick

Mangalore ridge tiles 20 mm thick

SHANITH KV

Bidder Name

CHANDU K

SHANITH KV