REPAIR TO ROOF TREATMENT, CONNECTED ITEMS, SUNKEN FLOORING, SANITARY AND PLUMBING ITEMS TO CERTAIN BLDGS AT K AREA AND SF ACCN AT SEC 28/29D UNDER GE CHANDIGARH

Amount

Dismantling the entire roof covering including brick tiles, mud puska , mud plaster and water proofing treatment any number of layers or thickness etc of any description upto RCC roof slab and cleaning the surface including flashings and junction of parapets, etc with wire brushes and water to the entire satisfaction of Engineer-in-charge including removing soil (mud phuska) from the site to a distance not exc. 500m and depositing where directed, complete all as specified and as directed.

Cutting out cracks to 'V' section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen of 85/25 and clean dry sand 1 : 1 (by wt) complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate average thickness 50mm as in roof padding mixed with water proofing compound complete all as specified mixing directed. Note:- Water proofing liquid shall be paid seperately

M&L for rendering 10mm thick in cm 1 : 3 mixed with liquid water proofing compound as per manufacturers instructions on concrete/brick surfaces finished even and smooth without using extra cement complete all as directed (WPC measured and paid separately) complete all as specified and as directed.

Providing roof treatment as under : - (a) Applying bitumenous primer @ 0.30 litre per sqm over cleaned and dry roof surface including parapet (b) Material and labour for providing and laying 3mm thick APP modified polyester reinforced water proofing membrane with minimum weight of 3.60 kg/sqm , as specified. The APP membrane shall be laid using torch-on application with minimum 10 cm side overlap and 15 cm end overlap. The APP memberane shall be fixed with termination bar and fasteners and end shall be properly sealed with sealant. The rain water gutter portion shall be finished with cement mortar 1:4 to provide requisite slope towards rain water pipe outlet.

M&L for 20mm thick grey coloured PCC tiles 20cm x 20cm, machine pressed laid over & including 20mm thick screed or bedding layer in cement mortar 1:4 mixed with and including waterproofing compound as per manufacturers instructions bag and joints grouted & pointed flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof kerb or mud stops mixed with acrylic base water proofing compound @ 1% by wt of cement including all necessary form work all as specified.

Supply only water proofing compound ISI marked complete all as specified.

Demolition of lime/cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including chaina mozaic, WC etc complete all as specified and as directed.

M&L providig protection layer applying 15 mm thick cement plaster in cement mortar 1:4 (cement :coarse sand) including waterproofing as per manufacturers instructions compound all as specified & directed directed.

M&L cement concrete 1:7:12 using 40mm graded brick aggregate in sunken floor all as specified and directed.

M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

M&L 25mm thick cement concrete as in screed bed in cement concrete type B0 1:2:4 using 12.5mm graded stone aggregate as in floor, finished fair and even (toilet & bathroom sunken portion) or any where as required, complete all as specified and as directed.

S&F 50mm dia GI spout pipe 600 mm long, light grade cembeded in cement concrete 1:2:4 type B-0 (using 12.5mm graded aggregate) complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F tubes 15 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.

Fixing only tubes, any grade, to walls and ceilings or laying in floors 15 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F Tubes 20 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.

Fixing only tubes, any grade, to walls and ceilings or laying in floors 20 mm, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including in short lengths standard clamps and screws fixed on rawal plugs Complete.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified.

S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20 mm bore dia complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 15 mm bore dia complete all as specified and directed.

Ball valves fixed of 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms ) complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls of any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M&L for rendering 15 mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:4) finished fair all as specified and directed.

M&L for rendering 15 mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of concrete surfaces as in ceiling complete all as specified and directed.

M&L two coats of cement base paint on walls on newly plastered surfaces including prepartion of surfaces complete all as specified and directed.

Material & labour for preparation of new plastered surface of wall and applying two coat of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

Material & labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall complete all as specified and directed

S&F 110 mm PVC (SWR) pipes PVC (SWR) bends any radius complete all as specified and directed

Demolition of brickwork or stone/boulder masonary, built in lime mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar

Brick work with sub class 'B' bricks, class Designation 10 straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Ditto all as above item no. 36 but except bricks.

M&L taking out roots of trees penetrated through valves/concrete surfaces etc upto a depth of 600mm by chieseling , demolition of brick work , concrete work and pouring concentrated acids/Dr fixit chemicals upto the depth of roots and making good the disturbed portion to match with the existing surface complete all as specified and directed.

Dismantling water tanks of capacity exc. 250 but not exc. 500 litres complete all as specified and directed.

Dismantling water tanks of capacity exc. 500 but not exc. 1000 litres complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks two layer ISI marked of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks two layer ISI marked of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Disconnecting existing tanks of capacity 500 ltrs setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt etc

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Glazed ceramic coloured,,tiles 450x300x 7mm / 300x200x 7mm thick in vertical surfaces such as skirting,dados and risers to steps over and including 10mm thick in cement mortar (1:4). in any pattern and shade/colour as directed by Engr-in-charge, complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floor/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and include 15 mm thick screed bed in cement mortar1:4, complete all as specified and directed.

S & F in repair vitreous china wash down water closet (pedestal pattern) white with ‘ and including CI P’ or ‘S’ trap, plastic seat cover white and connection to out going pipe & to flushing pipe, anti-syphonage pipe complete all as specified and as directed.

S&F vitreous china squatting pan Orissa pattern 580x440mm size mm white with integral foot rest (excluding flushing cistern and flush pipe) complete incl provision of lime concrete bedding, connection to trap and to flushing pipe, anti-syphoage pipe etc fixed as in repair complete all as specified and as directed.

S&F in repairs Vitreous China wash basin white flat back of size 550x400mm with CP waste coupling & pipe complete all as specified and directed by Engr-in-Charge.

S&F in repair 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketsPVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair complete all as specified.

S &F in repair chromium plated fancy type Bib taps long body cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore pipe complete all as specified and directed.

S &F in repair 15 mm bore Pillar taps cast copper alloy, fancy type with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair CP angle valves, cast copper alloy chromium plated fancy type screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed for 15 mm bore complete all as specified and directed.

PVC connections in repair 15mm size with PTMT nuts of length 450mmcomplete all as specified and directed.

S & F in repair CP Stop valves Concealed, cast copper alloy chromium plated fancy type screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed for 15 mm bore complete all as specified and directed.

Dismantling of cast iron/drain pipes, 100/75mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall 100 mm bore complete all as specified and directed.

Ditto all as above item no. 57 but 75mm bore

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors 100 mm bore complete all as specified and directed.

S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors 75 mm bore complete all as specified and directed.

S&F in rep 100mm dia CI bends with oval access door diminishing pieces or tapers (larger bore measured)

S&F in rep 75mm dia CI bends with oval access door diminishing pieces or tapers (larger bore measured)

M&L Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75 mm bore complete all as specified and directed.

S&F Cast iron repair Bends (any radius) with duck's foot or heel rest 100 mm bore complete all as specified and directed.

S&F Cast iron repair Bends (any radius) with duck's foot or heel rest 75mm bore complete all as specified and directed.

S&F Cast iron 100 mm bore branch junction single T equal or unequal with access door fixed in repair complete all as specified.

S&F Cast iron 75 mm bore junction single T equal or unequal with acess door fixed in repair complete all as specified.

S&F 75 mm Cast iron cowls fixed in repair complete all as specified.

S&F 100 mm Cast iron cowls fixed in repair complete all as specified.

Cutting into existing manholes for removing existing branch drain making good to walling and rendering cutting out branch channel and making good benching for 100mm/75 mm bore pipe

Taking down chowkats or frames with shutter (Without taking of shutter from the frame) n. exc 1.50Sqm each

Taking down shutter of any description exc 1 sq.m but n exc 2.00 sq.m and refixing in same opening after minor adujusting complete all as specified and directed

S&F factory made solid PVC single door frames of size 50 x 47mm made out of 5mm plain colour PVC Sheets reinforeced with MS Square tubbing in opening complete all as specified and directed.

Supply & fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck side with solvent cement for slice and plane colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap inserted for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MX frame welded/sealed to the style and rails with suitable PVC sheet beeding and joined together with solvent cement call as specified & directed.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S & F Aluminium anodised, barrel tower bolts of extruded section and fixed 200 mm long complete all as specifid and directed.

S & F 150 mm Extruded aluminium alloy handles powder coated, fabricated type.complete all as specified

S&F in repair Salt-glazed stoneware gully,traps, 100 X 100 mm square or round mouthed, tvpe 'P'including all excvation and earthwork comcrete in beds,surrounds,kerbs etc setting in cement mortar 1:1 complete all as specified and directed.

Satyadev Builders

M/S sanjay and co.

His Construction Company

AGGARWAL & CO

R D Bansal

dhiraaj construction company