8379 PROVN OF ELECTRO STATIC DISCHARGE MATTING AND MODULAR WORK AND 300 X CEILING FAN AND PPGI SHEETS REPLACE AT 606 EME AND 116 ENGR REGT UNDER GE (EAST) BAREILLY

Amount

S&F electrostatic Discharge Matting having conductive vinyl or rubber with minimum resistance of 106 to 108 ohms per square inch and minimum thicknesss of 3.2 mm on floors and work stations having integrate grounding clips or straps into the matting for reliable connection to the building's grounding complete all as specified and directed.

M&L for 18mm thick high Density PVC board both side decorative for modular work station including hinges, telescopic channels , handles, magnetic catchers and glass (minimum thickness of 3 mm) electrical fittings and fixtures as per Sketch No P. Note- Electricals fittings and fixtures will be paid separately

M&L for 18mm thick high Density PVC board both side decorative for modular work station including hinges, telescopic channels , handles, magnetic catchers and glass (minimum thickness of 3 mm) electrical fittings and fixtures as per sketch No Q Note- Electricals fittings and fixtures will be paid separately

M&L for 18mm thick high Density PVC board both side decorative for modular work station including hinges, telescopic channels , handles, magnetic catchers and glass (minimum thickness of 3 mm) electrical fittings and fixtures as per sketch No R. Note- Electricals fittings and fixtures will be paid separately

M&L for 18mm thick high Density PVC board both side decorative for modular work station including hinges, telescopic channels , handles, magnetic catchers and glass (minimum thickness of 3 mm) electrical fittings and fixtures as per sketch No S. Note- Electricals fittings and fixtures will be paid separately

M&L for 18mm thick high Density PVC board both side decorative for modular Table station including hinges, telescopic channels , handles, magnetic catchers and glass (minimum thickness of 3 mm) electrical fittings and fixtures as per sketch No T Note- Electricals fittings and fixtures will be paid separately

M&L for 18mm thick high Density PVC board both side decorative for modular work station including hinges, telescopic channels , handles, magnetic catchers and glass (minimum thickness of 3 mm) electrical fittings and fixtures as per sketch No U Note- Electricals fittings and fixtures will be paid separately

M&L for 18mm thick high Density PVC board both side decorative for modular work station including hinges, telescopic channels , handles, magnetic catchers and glass (minimum thickness of 3 mm) electrical fittings and fixtures as per sketch No V Note- Electricals fittings and fixtures will be paid separately

M&L for anti-static fabric dustproof curtains having minimum thickness of 0.5 mm for windows and doors including necessary fitting and fIxtures complete all as specified and directed.

Providing & fixing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the GE.

M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean ,free from dust ,loose paint etc by skilled labour and applying two coat oil bound distemper on wall with airless electric sprayers over a coat of primer applied using airless electric sprayer over one coat of wall care putty of 1mm thickness complete all as specified and directed. Note:-Application to be done through authorised applicator of manufacturer.

Dismantling wall/ ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling timber scantlings unframed work 40 sq. cm and over in section, in truss/ purlin rafter etc. complete all as specified and directed.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410-W (Gde E- 250) quality A complete all as specified and directed.

S&F pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/ cladding to wall, fixed with 5 Nos self tapping screws on each sheet/ each support rubber lining and filling of gap with cement mortar in CM 1:4 with wall and sheet up to 6 mtr height complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for fly ash brick work with old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on brick work surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation newly plastered walls surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper any colour using roller, brushes including in patches over a coat of alkali resistant primer and including 1.5 mm thick wall care putty in two layers with making smooth surface by rubbing with minimum 6 hr interval between any two coats complete all as specified and directed.

M&L for complete removal of existing treatment of wall by vacuum based sanding machine, scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc and applying two coats of exterior acrylic emulsion of any colour over a coat of exterior water based wall priming and including provision of scaffolding required for the treatment to external surface of building with required safety measures complete all as specified and directed.

S&F horizontal level suspended ceiling of GI clip-in micro perforated 600 x 600 mm (nominal size) tile of 120 mm galvanised steel as per IS 277 (2003) suitable for architectural finishes in 0.5mm thickness as per in IS : 513 (1994) Global white colour with concealed suspension system having a beveled edge on 3x3mm and height of 33 mm on one side and 18mm on other side. Tile shall have perforated of hole diameter 2.5mm and open area 16% with linear and diagonal pitch of 5.5mm and 7.7mm respectively along with a border of 10mm. The tile shall be electro-statically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80microns. Back side of the tile shall have soundtex fleece hot pressed mechanically for uniform bonding to achieve NRC up to 0.7 all as per manufactures instructions complete all as specified and directed. Note : If electrical cables are running at site and required to be relocated electric fittings on walls are required to be shifted including re-fixing of fan/ light fittings and other light accessory including making good the wall surface shall be deemed to be included in quoted rates.

Taking down carefully existing Aluminum/Copper point wiring (light/ Fan/ Ind Socket/Ind Same socket/ Power Point) complete fittings etc. making good to disturbed surface of wall/Floor etc to match the existing surface/ finishes complete all as specified and directed.

M&L for concealed point wiring for one light/ fan/ bell point controlled by one switch with 1.5 Sqmm (Nominal area) PVC insulated, unsheathed, stranded copper conductor cable FRLS (1100Volts grade) drawn in and including PVC conduits of 20 mm dia with all fittings and accessories alongwith PVC insulated cable with copper conductor of size 1.5 Sqmm FRLS as earth continuity conductor including fixing of 1. 2mm thick MS sunk terminal box duly flus complete all as specified and directed.

All as per item No 26 here in before but for socket outlet 3/5 pin 5 amp. on the same board.

All as per item No 26 here-in-before but for 5 Amps 3/5 Pin point on independent board

M&L for concealed point wiring with 2.5 Sqmm (Nominal area) PVC insulated,unsheathed, multi stranded copper conductor FRLS cable drawn in and including PVC rigid PVC conduit 25mm or higher size with all its fittngs and accessories for one 3 pin/6 pin 15 Amps socket out let point independent alongwith PVC insulated cable with solid copper conductor 1.5 Sqmm FRLS (nominal area) continuous earth wire, and connected to earth dolly including fixing of 1.20mm sunk pressed steel terminal box suitably flushed to wall with 3mm thick Hylum sheet cover fixed with screws & cup washers incl. making good complete all as specified and directed.

S&F modular switches 1 way, 6 A, 1 module complete all as specified and directed.

S&F modular switches 1 way, 16 A, 1 module complete all as specified and directed.

S&F modular sockets 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S&F switch piano flush type single pole one way 5 Amps complete all as specified and directed.

S&F switch Piano flush type single pole one way 15 Amps complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5 Amp flush type complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp complete all as specified and directed.

S&F lamp holder (batten/ angle) PVC/ polycorbonate type with back plate for batten/ angle fittings complete all as specified and directed.

S&F ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F LED tube light fittings 1x 20 watt (T-8 ), 4' long, 220 Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED building security light fitting 25 Watt,230 Volts, AC outdoor type with high pressure die cast aluminium housing and heat resistant polycarbonate cover complete with driver, lamp & IP 65/66 protection complete all as specified and directed.

Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan including Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and remarking the serial MES fan nos complete all as specified and directed.

Taking dowm sub main wiring/ service cable including earth wire and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.

M&L for sub main wiring concealed type with two single core FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including rigid PVC conduits of 25 mm dia medium grade size and making good the disturbed surfaces complete all as specified and directed.

M&L for sub main wiring concealed type with two single core FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through in & including rigid PVC conduits of 25 mm dia medium grade size and making good the disturbed surfaces complete all as specified and directed.

S&F in repair double door MCB distribution boards steel sheet, powder coated DBs suitable for MCBs fitted with 200 Amps rated bus bar neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 8 ways 240 Volt complete all as specified and directed.

S&F in repair MCB single phase and neutral 32 to 40 A, 230V 10KA. C' curve type complete all as specified and directed.

S&F in repair MCB SP 6A-32A, 230V 10kA 'B' curve type complete all as specified and directed.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60×60cm × 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicatedincluding testing on completion complete all as specified and directed.

S&F in repair sheet metal enclousers DB's 415 volts, IP-42, vertical suitable for MCCBs, TPN, 8 way with 200 Amps rated copper bus bar complete all as specified and directed.

S&F in repair MCCB TPN 100 Apms, 415V, 16kA, 4 pole complete all as specified and directed.

Supplying, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core complete all as specified and directed.

Supply and laying GI tubing light grade 40 mm bore dia with all fittings for cable protection complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in any type of soil completed all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.50M above the starting point complete all as specified and directed.

M&L for dry sand cusioning for UG cable in trenches including spreading levelling and hand panning and consolidating complete all as specified and directed.

S&F old size bricks; common burnt clay building bricks, sub-class ‘B’ designation 75 complete all as specified and directed.

S&F stepped, electronic fan regulator flush type, 180 Watt, 240 Volts on the existing phenolic laminated sheet complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F LED mirror light fixture 9W LED 6000K complete all as specified and directed.

S&F modular function unit box with MCB 25A complete all as specified and directed.

Supply and install hi wall mounted split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity as shown complete all as specified and directed.

S&F 2'x 2' LED recess/ surface mounted fitting 36 Watt, 230V, with integrated electronic driver high transcluent frosted diffuser, connector block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

NOORI ENTERPRISES (BID ID -3139012)

M M CONSTRUCTIONS (BID ID -3137465)