752798 A ADDN ALTN CUM SPL REPAIRS OF CERTAIN MD ACCN AT RAMGARH

Amount

SCHEDULE "A" :

Item No. 01 :- Taking down chowkats or frames with shutters (without taking off shutters from the frames)exc 1.5 Sqm & n. exc 4.00 sqm each and removing from site and making good disturbed surface of wall in CM(1:3), complete all as specified and directed.

Item No 02 :- Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each and removing from site and making good disturbed surface of wall in CM(1:3), complete all as specified and directed.

Item No 03 :- Taking down shutters of any description exc 1.00 sqm and n exc 2.00 Sqm each and removing from site complete all as specified and directed.

Item No 04 : M&L Pressed steel frames for doors with one with one or more rebates size of frame (105 x 60 mm x1.25 mm ) including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

Item No 05 : M&L Pressed steel frames for doors with one with one or more rebates size of frame (125 x 60 mm x 1.25 mm) including necessary fixing lugs, hinges, lock strike plate, etc. complete all as directed and specified.

Item No 06 : S&F Second class hard wood 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed.

Item No 07 : S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Item No 08 : - S & F solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2020 Part-II complete all as specified and directed

Item No 09 : - S&F Factory made solid PVC Moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm prelam PVC sheet on back face,with particle board core supplying and fixing in the frame as shown on drawing in section 8 of SSR-2020 Part-II complete all as specified and directed

Item No 10 : - S&F aluminium,anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

Item No. 11 :- S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

Item No 12 :- S&F 100 mm size Butt hinges, medium weight cold rolled mild steel complete door etc complete all as specified and directed.

Item No 13 :- S&F Extruded aluminium alloy handles fabricated type anodized 150mm size complete all as specified and directed.

Item No 14 : M&L for PVC floor trap with grating including jointing to waste pipe 100 mm diameter of outlet fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

Item No 15 : S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

Item No 16 : S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded with & including flat iron for securing wire mesh complete all as specified and directed.

Item No 17 : M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Item No 18 : - S&F steel windows or ventilators fixed type with glazing bars complete all as specified and directed.

Item No 19 : - S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -410 O or 310 O. complete all as specified and directed.

Item No 20 : - S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

Item No. 21:- S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Item No. 22:- S&F 25 mm dia stainless steel curtain rods wall thickness 1.25mm with fixing brackets, steps, rollers etc and like as approved & directed etc fixed in repairs

Item No. 23:- M&L for welding in repairs not exceeding 2.5 cm in length, thickness of metal to be welded not exceeding 6 mm complete all as specified and directed.

Item No 24 : - Demolition of stone slabs and tiles of any description or thickness, laid bedded and pointed in any mortar in floor, apron etc complete all as specified and directed

Item No. 25 :- M&L for machine cut kota stone slab 22-25mm thick in steps laid over and including 20mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and polishing with bees wax polish complete all as specified and directed.

Item No. 26 :- -ditto- as as per item No25 but 15-20mm thick for skirting over 10 mm thick rendering in CM (1:4) etc complete all as specified and directed.

Item No 27:- M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matched including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge

Item No 28 :- -ditto- as per item No 27 but for skirting /dado over 10mm thick in CM 1:4 etc complete all as specified and as directed by Engr-in-Charge

Item No 29 :- M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matched including 15 mm thick screed base in CM 1:4 complete all as specified and as directed by Engr-in-Charge

Item No. 30 :- M & L for glazed coloured ceramic tiles on vertical surfaces of walls as in skirtings/dado using size (450 x 300mm) x 7mm thick coloured tiles of approved design, set and jointed in neat cement slurry and pointed in white or approved design, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 10mm thick screed in CM(1:4) complete all as specified and directed.

Item No 31 : - M&L for granite (of approved colour) tiles 18 to 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20 mm thick screed base in CM (1:4)complete all as specified and directed.

Item No 32 : - M&L for vitrified ceramic tiles, doubly charged, 10 mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

Item No 33 :- Ditto but in skirting/dado over & incl 10 mm thick screed in CM 1:4 etc complete all as specified and directed.

Item No 34 :- S&F in repair Vitreous china squatting pan of Orissa pattern size 580 x 440 mm white integral foot rest complete all as specified and directed.

Item No 35 :- S&F in repair Vitreous china wash basin, flat black size 450 x300 mm size including brackets complete all as specified and directed.

Item No 36 : S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm

Item No 37 : S&F in repair stainless steel sink with drainage board made out of 1.0 mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm imaking good complete all as specified and as directed.

Item No 38 : S&F in repairs vitreous china wash down water closet pan (Pedestal Pattern) white incl 'P' or 'S' trap (Make : Hindware/Cera-Ist quality) and making good the disturbed surface to match with the existing complete all as specified and as directed.

Item No 39 : - S&F in repair plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Item No 40 : - Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Item No 41 : - S&F GI tubes medium grade with all fittings laid in trenches of 15 mm bore of pipe complete all as specified and directed.

Item No. 42:- Refixing old 15 mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc) including new GI fittings complete all as specified and directed.

Item No. 43:- S&F in repair 15mm dia bib taps cast copper alloy with crutch or butterfly handle fancy type, screwed down, screwed for iron pipe or for brass ferrule of pipe complete all as specified and directed.

Item No. 44 :- S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layered 1000 litre capacity hoisted and fixed in position including dismantling of existing tank complete all as specified and directed

Item No. 45 :- S&F in repair 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of pipe complete all as specified and directed.

Item No. 46 :- S&F in repair brass chromium plated shower rose 125 mm size fancy type with or without swivel joint fixed to iron pipe etc complete all as specified and directed.

Item No. 47:- S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 750 x 600 x 250 mm size fixing with wooden plug with suitable size of screws of approved makes complete all as specified and directed.

Item No 48 :.Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Item No 49 : - M&L for rendering 15 mm thick in cement mortar 1:4 in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, both layers mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Item No 50 :-M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick or concrete surface finished even and smooth w/o using extra cement, complete all as specified and directed.

Item No 51 : - M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed .

Item No. 52 :- M&L for preparing newly plaster surface of wall and applying two coats of oil bound distemper over a coat of primer and 1 mm thick wall care putty including preparation complete all as specified and directed.

Item No. 53 :- M&L applying three coats of white wash on newly plaster surface Ceiling including preparation of surface complete all as specified and directed.

Item No. 54 :- M & L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, and evenly applying one coat of white wash complete all as specified and as directed.

Item No 55 : - M&L for preparation of old plastered surfaces of ceilings and apply one coat of white wash complete all as specified and directed.

Item No 56 : - Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali primer complete all as specified and directed.

Item No. 57 :- S&F in repair 15mm bore dia pillar taps chromium plated with capston head, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

Item No 57A : - S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm bore dia of pipe complete all as specified and directed.

Item No 58:- Taking down carefully existing bituminous felt including plastered lime or cement concrete of any thickness and cleaning of the surface of roof treanches including flushing and junction parapets kerb walls PCC fillets benching etc with wire brushes and removing of the rubbish to a distance not exc 500 mtrs and depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified and directed.

Item No. 59 :-M&L for 10 mm thick Screed bed or bedding layer in CM 1:4 using WPC @ 3% by weight of cement over concrete roof surface finished fair and even to maintain the proper slope to roof surface complete all as specified and directed. Note: - WPC shall be measured and paid separately under respective items.

Item No 60: - M & L 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyester non woven fabric (wt. not less than 150 gms/sqm) over and incl bituminus primer conforming to IS 3384-1965 @ 0.3 Kg per SQM complete all as specified and directed.

Item No 60 A : - M&L for applying a coat of hot blown bitumen @ 1.2 kg/ Sqm complete all as specified and directed.

Item No 60 B : - M&L for applying two coats of bituminous aluminum paint @ 100grams/SQM per coat over polymeric membrane on non approachable roofs complete all as specified and directed.

Item No 61 : - M&L for cement concrete tiles (machine cut and polished) 25cm x 25 cm x 22mm thick conforming to IS-1237, with size of chips upto 6mm set in neat cement slurry and joint filled with chemical like tile grout in floors over & including 20 mm screed bed in CM 1:4 complete all as specified and directed.

Item No 62 : - M&L for providing 1:2:4 type B1 as in cills, seismic and other similar bands plinth courses, coping, bed plates, bond stones etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Item No 63 : - Supply only liquid water proofing compound complete all as specified and directed.

Item No 64 :- Treatment to sunken portion as under :-

(a) M&L for rendering 15mm thick in CM 1:4 on wall using WPC as per manufacturers instructions finish even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid seperately.

(b) M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates using WPC as per manufacturers instructions as in sunken portion and making adequate slope towards spout pipe finish even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid seperately.

(c) M&L for applying two coats of hot blown bitumen 85/25 grade @ 1.5 kg/ Sqm per coat complete all as specified and directed. Note:- One coat over plaster/PCC floor and other coat shall be on polythene film.

(d) M&L for black polythene film 200 micron laid in floor and fixed on vertical surface complete all as specified and directed.

(e) M&L for PCC 1:3:6 type C-2 using 40mm graded brick aggregates as in filling in sunken portion complete all as specified and directed.

Item No 65 : - Complete removal of existing treatment from old decorated plastered or unplastered wall surfaces including cornices, pillars etc, scraping washing rubbing, brooming down all as specified and directed.

Item No 66 - M&L for preparing old painted wooden surface over 10cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed.

Item No 67 - M&L for preparing old painted steel surface over 10cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed.

Item No 68 :- M & L for Cement concrete 1:3:6 Type C1 (using 20mm graded stone aggregate) in surface channels and drains all as specified and directed.

Item No 69 : - Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitered/stopped end etc complete all as specified and directed.

Item No 70 : S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Item No 71 : S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Item No 72 : S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

Item No 73 : S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

Item No. 74 :- S&F 15mm bore dia of pipe brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Item No. 75 :- S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed.

Item No. 76 :- S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed.

Item No. 77 :- PVC (SWR) junction of 75 mm bore single, (single T) equal or unequal with access door, fixed in repairs, complete all as specified and directed.

Item No. 78 :- PVC (SWR) junction of 110 mm bore single, (single T) equal or unequal with access door, fixed in repairs, complete all as specified and directed.

Item No. 79 :- PVC (SWR) branch piece of 75 mm bore, double (double Y) equal or unequal fixed in repairs, complete all as specified and directed.

Item No.80 :- PVC (SWR) branch piece of 110 mm bore, double (double Y) equal or unequal fixed in repairs, complete all as specified and directed.

Item No 81 : S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

Item No 82 : S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

Item No 83 : S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.

Item No 84 : - S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed.

Item No 84A : - S&F Angle stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed.

Item No 84B: - S&F stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for 15 mm bore dia of pipe complete all as specified and directed.

Item No 85 : - S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

Item No 86 : - M&L for 100 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

Item No. 87:- S&F machine pressed precast concrete interlocking paver of 60 mm thick, hydraulically pressed cemented tiles of grey colour with pigments, (glossy finish/ rubber mat finish) factory made M-35 grade conforming to IS-15658-2006, as in floor laid over & including 50 mm thick sand cushion and including filling of interstices with fine sand complete all as specified and directed.

Item No. 88:- M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Item No. 89:- Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

Item No 90 : - S&F GI tubes medium grade with all fittings laid in trenches of 20 mm bore of pipe complete all as specified and directed.

Item No. 91 :- Refixing old GI steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 bore of pipe complete all as specified and directed.

Item No 93:- S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Item No. 94 :- Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames or including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Item No 95 : - 10 ltr capacity PVC coloured flushing cistern high/low including ball valve, bracket inlet, outlet PVC pipe, fixed in repairs complete all as specified and directed.

Item No 96 : - Dismantling loose/disintegrated portion of RCC chajjas, bands, shelves, beams and similar works incl provison of supports if reqd and dubbing with PCC 1:1.5:3 using 6 to 12.5mm thick graded stone aggregate in any portion of 15 mm to 50mm thick and finshing to desired shapes. complete all as specified and directed.

Item No 97 :.S&F mild steel cupboard shutter with frame, made out 22 gauge mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock, verticle type size 65mm, 4 livers with escutche on plates & two keys) with and including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing 6 Nos 12mm dia bolts 150 mm long grouted in brick wall / concrete including making good the distrubed surface as orignal complete all as specified and directed. (Make of lock :Godrej/Harrison/Link or equivalent as approved by GE).

Item No 98 : - Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

Item No 99 : - Toilet paper holder, vitreous China, box type complete all as specified and directed.

Item No 100 : - S & F hand health faucets with 1200mm long connecting pipe and holder complete all as specified and directed . Make:- Parryware

Item No 101: -S&F in repairs corner piece of acrylic sheet, 30 cm radius fixed with screwed colour and design as approved.

Item No 102 - S & F, in repair, factory brand, cabinet mirror, PVC box type, of size 45cm x 30cm, of best quality and of standard make, approved by GE.

Item No 103 - M & L for prelaminated particle board 18/19 mm interior grade prlaminated oneside with decorative choice lamination and other sidebalancing white lamination fixed with screw timber frame work etc complete all as specified and directed.

Item No 104 :- Dismantling of AC corrugated / CGI corrugated, semi corrugated sheet as in roof coverings complete all as specified and directed.

Item No 105 : - Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Item No 106 : Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs/ blankets any thickness including cover fillets complete all as specified and directed.

Item No. 107 :- M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centr complete all as specified and directed.

Item No 108 : - M&L Seamless calcium silicate ceiling made out of 1800 x 1200mm x12mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws havingphillipshead with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seamless finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed.

Item No. 109 :- S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified and directed.

Item No. 110 :- S&F rolled mild steel section in roof trusses (framed), trussed, purlins, crane gantries,rail and fastenings and heavy bracket framing (beam, tee, angle,channel or flat sections) including distance pieces, cleat etc of grade Fe- 290 (Gde E-165) complete all as specified and directed.

Item No. 111 :- S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as complete all as specified and directed.

Item No. 112 :- S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.

Item No. 113:- M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. (Note : 10 mm wide and 75 mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.)

Item No. 114 :- Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Item No. 115 :- M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Item No 116 : M&L Brick work using old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

INTERNAL ELECTRIFICATION

Item No. 117 :- Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Item No. 118 :- Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Item No. 119 :- Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Item No. 120 :- Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M complete all as specified and as directed.

Item No. 121 :- Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.

Item No. 122 :- Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M complete all as specified and as directed.

Item No. 123 :- M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by two, two way switch 5 Amps

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(f) One bell point controlled by one, bell switch 5 Amps

Item No. 124 :- Description all as per item No 123 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No.125 :- M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 Amps

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(f) One bell point controlled by one, bell switch 5 Amps

Item No. 126 :- Description all as per item No 125 here in before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 127 :- Description all as per item No.125 here in before but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

Item No. 128 :- S & F Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 129 :- S & F Switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed at site.

Item No. 130 :- S & F Switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 131 :- S & F switch bell push piano type 5 amp, 230 Volts Complete all as specified and directed at site.

Item No. 132 :- S & F socket outlet 2 in 1 , 5 pin, 5 amp, 230 Volts complete all as specified and directed at site.

Item No. 133 :- S & F socket outlet 2 in 1 , 5 pin, 5/15 amp, 230 Volts complete all as specified and directed at site.

Item No. 134 :- S & F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

Item No. 135 :- S & F stepped type electronic fan regulator flushType complete all as specified and directed at site.

Item No. 136 :- S & F Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

Item No. 137 :- S & F Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

Item No. 138 :- S & F Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified.

Item No. 139 :- S & F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

Item No. 140 :- S & F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

Item No. 141 :- S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Item No. 142 :- S & F Bell push modular 6 Amps single module complete all as specified.

Item No. 143 :- S & F lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed.

Item No. 144 :- S & F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Item No. 145 :- S & F Modular type TV Socket out let complete all as specified and as directed.

Item No. 146 :- M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit

Item No. 147 :- M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

Item No. 148 :- S & F sheet metal enclosure MCB DB TPN 6 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 149 :- S & F sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 150 :- S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 151 :- S & F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 152 :- S & F MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 153 :- S & F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

Item No. 154 :- S & F metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed

Item No. 155 :- S & F water heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner container of capacity 25 ltrs, electrically operated, AC 230 Volts,BEE 5 star rated, ISI marked including 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold for Officers JCO's and OR Md Accn incliding writting the MES Number with synthetic enamel paint complete all as specied and as directed

Item No. 156 :- S & F ceiling fan, 230 Volts, 1200 mm sweep with mian air delivary 210 CFM, service value of the fan shall be greater than 6.1 as per BIS with blades, down rod & other necessary accessories with brushless direct current motor (BLDC) with out remote system and electrical connections from ceiling rose to fan teriminal complete all as specified and as directed.

Item No. 157 :- S & F energy efficient exhaust fan of 230/300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Item No. 158 :- Labour only for refixing the celing fan/ Exhaust fan obtained from taking down with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc and writting the MES Number with synthetic enamel paint complete all as specified and as directed.

Item No. 159 :- S & F for Highly efficient LED Bulbs, 10 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed

Item No. 160 :- S & F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 10 watts complete all as specified and as directed. Make Havells Cat No LHDLO6160099 or its equvalent in Philips, Bajaj.

Item No. 161 :- S & F LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 NW or its equivallent model in Wipro, Philips.

Item No. 162 :- S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :- Bajaj Cat No BIBWP 10W LED or its equvalent in Philips, Wipro.

Item No. 163 :- S & F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

Item No. 164 :- S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 24L WH CR PC SD (Edge plus series) or its equvalent in Philips, Wipro.

Item No. 165 :- S & F PVC non-metallic rigid conduit ISI marked heavy duty white/ Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed.

Item No. 166 :- labour only for fixing KWH meter single phase of any capacity including all necessary electrical connections obtained from item No 6 above complete all as specified and as directed. (Civilian Md type II Accn)

Item No. 167 :- Supply, installation, commissioning and testing indoor type LT wall mounting Panel Board of minimum size 1.50 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of four Nos Three phase KWH meter, one No single phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/ sleeves with maintained the colour code and copper strip/ wire busbar of suitable size to MCCB input and MCCB/ MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 10 sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as directed by Engineer-in-Charge. (For Officers G+1 Md Accn )

OUTGOING (a) MCB, Tripple pole & neutral, 40 amps, 415 volts, ‘C’ curve, 10 KA all complete as specified and as directed - 4 Nos (Officers Accn) (b) MCB, single pole & neutral, 10 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed - 1 No (Stair case lighting) (c) Three Phase smart Meter, AC, Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 415 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt 865-867 MHz Radio Frequency communication facility with self healing Mesh network with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. Meter Should support the following data : 30 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, 30 load survey data for energy, monthly billing survey for Cumulative Energy and Max Demand. Meter should have connect / disconnect functionality operable compactable system from prepaid billing software in future. The meter should support open communication protocol DLMS with the software- 04 Nos. Make:- Secure, L&T, Schneider.

Item No. 168 :- Supply, installation, commissioning and testing indoor type LT wall mounting Panel Board of minimum size 1.20 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four comparment for fixing of five Nos single phase meter and MCB and porviding glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 sqmm copper wire and connection of all outgoing/incoming existing cables of any size complete all as specified and directed by Engineer-in-charge. (For G+1 JCOs, OR Md Accn)

OUTGOING (a) MCB, SPN, 40 amps, 240 volts, ‘C’ curve, 10 KA - 06 Nos (b) Fixing only serviceable existing electric meter- 04 Nos (obtained from taking down)

External Electric Supply

Item No. 169 :- Excavation in trenches not exc 1.5 mtr width and not exc 1.5 mtr in depth and getting out in soft / loose soil for laying /taking out of LT UG cable complete all as specified and directed.

Item No. 170 :- Returning, filling in including necessary spreading, leveling , watering and well ramming in layers not exc 25 cm thick in soils complete all as specified and directed.

Item No. 171 :- Removal of surplus soil to a distance not exc 50 mtr away and depositing where directed as a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Item No. 172 :- Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak of size 250 mm x 150 mm x 40 mm with minimum average breaking load 200 Kg as per IS 5820:1970, ISI marked all as specified and directed.

Item No. 173 :- Supply, spread and filling for clean dry river sand in trenches/ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified. Note :- Punned thickness only will be measured and paid.

Item No. 174 :- Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of following sizes complete all as specified and directed .

(a) 40 mm dia bore

(b) 25 mm dia bore

Item No. 175 :- Taking down existing old Extg unserviceable LT UG/ service cable of any description and size complete all as specified and directed.

Item No. 176 :- Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of size complete all as specified and directed

(a) 3.5 core x 35 Sqmm

(b) 4 core x 25 Sqmm

(c) 4 core x 16 Sqmm

(d) 2 core x 10 Sqmm

Item No. 177 : M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

SCHEDULE "A" (Schedule of credit) Schedule of Credit Rs 1391300.00 (Minus) inserted by the MES (Note : Credite amount shall be deducted manually to arrive net bid amount)

M/S SWASTIK HI-TECH BUILDERS PVT LTD

Nand Lal and Sons

SOOD ASSOCIATES PVT LTD