Special repairs to Bldg No. T-105 (VSK) and Roof treatment to Bldg No P-17, P-21, P-22, P-24 and Provn of Two wheeler MT shed at CG Complex under GE Ludhiana

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item No 02 above but in skirting/dado laid over and including 10mm thick cement screed in CM 1:4 complete all as specified and directed.

M&L for joint free non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick laid on screed bed 15 mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing and polishing complete all as specified and directed.

All as per item No 06 above but in skirting/dado laid over and including 10mm thick cement screed in CM 1:4 complete all as specified and directed.

M&L 50 mm thick PCC 1:4:8 type D-2 (with using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specfied and directed.

M&L chequerred cement concrete tiles 30cm x30 cm x 25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs& MS/Aluminium grid, any thickness including cover fillets complete all as specified and directed.

S&F GI frame work 605 X 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate chennel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fastener with and including ceiling section (not exc. 1.2m length) of 0.5mm thickness having kurled web of 50mm flange of 26 mm each with lips of 1050 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

S&F Non asbestos fibre cement building boards 7- 8mm fixed or laid/ inserted to GI framework with screws in ceiling flat or sloping complete all as specified and directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing complete all as specified and directed.

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottomrails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welde/ sealed to the styles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing.

Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed.

Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed.

S&F for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and directed. Sheet thickness 1.25mm.

M&L cement concrete 1:3:6 type Co (using 12.5 mm graded crushed stone aggregate) as filled in door frame chamfered angles, Hold Fast and throating, complete all as specified and directed.

S&F of factory made plain framed pannelled door shutters 35mm thick (two layer panel) with lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces. The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated complete all as specified and directed. Type of wood as approved.

M&L for preparation of newly or previously untreated wooden surface of any description and applying two coats of synthetic enamel paint over a coat of pink primer including preparation to new wooden surfaces exc.10cm in width or girth complete all as specified and directed.

S&F Anodised aluminium powder coated frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles -2 Nos in each door, hinges 100 mm -3 nos, tower bolt 150mm -2 nos , anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F Aluminium (Die cast body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

S&F Sheet glass ordinary quality, 5.5 mm thick in squares exc 0.5 sqm each pane complete all as specified and directed.

S&F floor door stopper of aluminium of 140 mm alloy body and tongue, anodised, with hard drawn steel spring fixed in floor etc complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed.

S&F 150mm aluminium anodised tower bolts of extruded section fixed with screw complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified and directed.

S&F three track powder coated aluminium sliding type window with frame without shash bars,aluminium section weighing not less than 0.55kg/RM including necessary jointing cleats,glazing clips,rubber packing anodised aluminium snap beading screws,etc,Two shutter to be fitted with 5 to 6 mm thick tinted glass & one shutter to be fitted with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aprture 1040mm guide channel at top and bottom with suitable roller including necessary aluminium builders hardware( locking arrangement), complete all as specified and directed.

Supply & fixing in repair curtain rod made out of 25mm dia (outer dia) pipe having thickness 0.63mm, PVC coated and colour / Pattern over all dia 28 to 29mm including taking down curtain rod along with wooden pallmate laid on wall complete all as specified and directed.

Supply & fixing in repair plastic finial of 29mm bore decorated type of any colour /Patern best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed.

Supply & fixing in repair mild steel prepainting bracket to hold the curtain rod and fixed to wall (concrete /brick masonary) with the help of 2 Nos, 50mm long steel screws and rawl plug included drilling with electric drill and making good the distrubed surfaces complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) triple layer hoisted and fixed in position including nipple suitable for water tank including dismantling water tanks of capacity 250 to 500 ltr and removing to store and S&F Brass ball valves 20 mm bore, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F Gun-metal, globe or gate valves of bore 20 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L Mild steel GI tubing 15 mm bore medium grade with all fittings fixed to walls including taking down steel water tubing of 15 mm bore including connection & removal to store complete all as specified and directed.

M&L Mild steel GI tubing 20 mm bore medium grade with all fittings fixed to walls including taking down steel water tubing of 20 mm bore including connection & removal to store complete all as specified and directed.

S&F tubular towel rail 20mm dia D type, Brass Chromium Plated 60 cm long between flanges complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing joint pipe, flushing pipe or Cistern, antisyphonage pipe complete including making goood to floor etc complete all as specified and directed.

S&F in repair plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete all as specified and directed.

S&F in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity etc complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat, back of size 580mm x 450mm including 32mm waste coupling and PVC waste down pipe complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed.

S&F in repair PVC bathroom cabinet mirror size 350mm x 450mm complete all as specified and directed.

S&F in repair pillar tap, cast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipe etc complete all as specified and directed.

S&F in repairs Bib taps 15mm bore, cast copper alloy with crutch or butterfly handle fency type, screwed down , screwed for iron pipe or for brass ferrule and fixed in iron pipe complete all as specified and directed.

S&F in repiar CP health faucet suitable for Europian western commode (EWC) including PVC connection 15mm size with PTMT nuts and washer, of length 900mm complete all as specified and directed.

S&F in repair stop valves/angle valve 15mm bore , cast copper alloy fency type, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F vitreous china Urinal, Half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. complete all as specified and directed.

S&F urinal spreader of CP any colour for fixing with 15 mm dia pipe complete all as specified and directed.

S&F vitreous china Urinal partition white of size 310 x 700 complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) 110mm dia bend of any radius complete all as specified and directed.

Supply & fixing 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement and fixed with cement concrete type B-1 (1:2:4) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified and directed.

M/L 75 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing surface even and smooth without using extra cement complete all as specified and directed.

S&F Soap dish fixed to walls with chromium plated brass screws complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid over and including 40mm thick sand layer, including necessary cutting and waste as per site requirement complete all as specified and directed.

Dismantling Asbestos cement corrugated or semi corrugated sheet in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling unframed fillets, rails, posts, rafters, purlins, etc. over 40 sq. cm in section complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 complete all as specified and directed.

M&L two coats of synthetic enamel paint to untreated surfaces of steel over 10cm width or girth not otherwise described over a coat of red oxide primer after preparation complete all as specified and directed.

S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar including all quoins, arches, pillars, etc but excl ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

All as per item No 69 above but except bricks complete all as specified and directed. (Old bricks shall be reused).

Taking down cement plaster of any description on brick or concrete surfaces etc. including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L rendering 12mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L two coats of cement base paint including preparation of newly plastered surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls of any description and applying two coats of distempering of wall over 3mm putty complete all as specified and directed.

S&F PVC (SWR) 75 dia bend of any radius complete all as specified and directed.

S&F glass self assembly stainless steel frame corner glass shelf etc complete all as specified and directed.

S&F toilet paper holder of CP with SS Flap fixed to walls with chromium plated brass screws complete all as specified and directed.

Excavation in trenches n. exc 1.5 metre wide for foundations etc. and not exceeding 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.

M&L, cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in bed to 150mm bore drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L, 150mm bore reinforced concrete pipe class NP3 laid in trenches including jointing & testing complete with collars complete all as specified and directed including demolition and breaking up 150mm bore drain pipes (salt glazed stoneware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

Returning filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removal of excavated surplus soil to a distance n.exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified and directed.

Supply only Integral water proofing compound ISI marked as approved complete all as specified and directed.

M&L for TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or secuiring with clips equality conforming to TMT bars complete all as specified and directed.

M&L precast reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in manhole covers and the like set in cement mortar (1:4) duly placed on manholes including demolition of reinforcement cement concrete as in manhole cover (reinforcement cut as reqd to facilitate demolition) complete all as specified and directed.

M&L PCC (1:2:4) type B-2 using 20 mm graded crushed stone aggregate as in surface channels and drains complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified & directed.

Dismantling brick tiles or terracing tiles sinlge layer including any treatment on roofs complete all as specified & directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part there of) and removing from outside of defence land complete all as specified & directed.

M&L for Plain cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate average thickness 50mm mixed with water proofing compound as in roof padding complete all as specified & directed.

M&L for screed bed or bedding layer of mortar 10mm thick on roof surface in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule) .

M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) laid on primed surfaces by forced application including applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm including cleaning surfaces complete all as specified and directed.

M&L 40mm thick brick tiles laid on Screed bed of cement mortar (1:3) 15mm thick finished even and fair and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed.

All as per item No 94 above but except tiles including removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed.

PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

S&F for 110 mm PVC (SWR) Rain water pipes in any length fixed to walls including Taking down eaves gutter and rain water pipes (of any size and patern), incl all fittings and, heads, shoes, bends, swan-necks, etc incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accesaries)

S&F rotational moulded polyethylene water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) triple layer hoisted and fixed in position including nipple suitable for water tank including dismantling of existing water tanks and S&F Brass ball valves 20 mm bore, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L 5mm thick rendering on concrete surfaces in cement mortar 1:3 as in ceiling, finsihed the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L three coats white wash on ceiling surfaces inclduing prepration of newly plastered surfaces complete all as specified and directed.

M&L 25mm thick Cement concrete 1:2:4 type B-0 using 20 mm graded crushed stone aggregate as in sub base rough finished surface complete all as specified and directed.

M&L Endura chequered cement concrete tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed in cement mortar 1:6 complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out in soft soil complete all as specified & directed.

M&L providing cement concrete type B-1 1:2:4 (20mm graded crushed stone aggregate) in pedestal, bed plates etc. complete all as specified & directed.

Supply and fixing tubular steel work in vertical posts, rafters, purlins, etc including special shaped washer and structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor's workshop, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F Roof truss/Framed works as in purlins, crane grantries, rails and fastening and heavy brackets framing Beam( of tee,angle, pipes of flat section , base plates etc) incluidng distence pieces complete all as specified & directed.

M&L for 100 mm PCC 1:2:4 type B-1 in flooring using 20mm graded crushed stone aggregates and finish surface even & fair including necessary formwork using extra cement complete all as specified and directed

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified & directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified & directed for the following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One bell point controlled by one, bell switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 109 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly.

All as per item No 109 above but with stranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly.

S & F for Modular switch one way 6 Amps, 1 module complete all as specified & directed.

S & F for Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified & directed.

S & F for celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified & directed..

S & F for modular step type fan regulator 120 watt two module suitable for operation on 230 volt 50 HZ AC supply complete all as specified & directed.

S & F for Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified & directed.

S & F for Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified & directed.

S & F for modular Bell push modular 6 Amps single module complete all as specified & directed.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified & directed.

S & F for for lamp holder, PVC body of brass suitable for batten fitting including removal of old unserviceable one complete all as specified & directed.

S & F for Highly efficient LED 9W bulb B22 CDL, used as a ready replacement for existing LED direct fit lamp complete all as specified & directed.

S & F for Decorative hanging luminaire with decorative glass shade with suitable holder for LED bulb and provosion of LED inverter bulb 10 watts complete all as specified & directed.

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified & directed.

S & F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified & directed.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA complete all as specified & directed.

S & F for MCB Single pole and neutral rated capacity 40 amps, 240 Volts breaking capacity 10 KA complete all as specified & directed.

S & F for MCB Single pole rated capacity 5 to 32 amps, 240 Volts breaking capacity 10 KA complete all as specified & directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 2.5 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified & directed. Note:- Two runs of 2.5 sqmm cable, one run of 2.5 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc three runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable wire complete all as specified & directed. Note:- Three runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit

Supply and fixing LED lights fitting 1x 20W, 230V, AC decorative box type with driver, holder including LED tube light CRCA housing battens are equipped with specially designed Extruded aluminium heat sink, Milky white PC diffuser and Elegantly designed white colored ABS endcaps to enhance the aesthethetics of the luminaire. with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified & directed.

S & F for recess mounted 2' x 2' square LED panel 36 watts, Ultra morden designed Modular High Efficancy LED luminaire with specialized High transmittance duel/multi layer prismatic optics for glare free symmetric light distribution offering excellent visual comfort with UGR levels of less than 19. luminaires suitable for Armstrong/Grid ceiling and most wide range of applications having multiple driver options like CISPR 15 compliance, Flicker-free operation, <5% THD complete all as specified & directed.

S & F for Decorative wall light fixture made up of Polycarbonate, suitable for 9 W LED lamp B22 base with unbreakable globe suitable for LED bulb and including provosion of inverter LED bulb 9/10 watts complete all as specified and directed.

S & F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and directed.

Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m Make- Bajaj or equivalent Make- of crompton/Havells) including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan deposited to E/M store complete all as specified and as directed

Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) old ceiling fan deposited to E/M store complete all as specified & directed.

S & F for New generation energy saving and environmental friendly long life LED street light capacity 25 watts made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom Opening seperate driver compartment with IP 66 protection and impact resistance of IK08 and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.0 mtr long bend to required shape with clamps, nut, bolts complete all as specified & directed.

M &L Earthing including earth work complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

Supply, laying, jointing, testing and commissioning in replacement of cable XLPE insulated , armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, laid in trenches, fixed by means of MS saddles on or fixed on poles including connection with proper lugs of size 35 Sqmm 3.5 Core including taking out old one. complete all as specified & directed.

Supplying and laying bricks common burnt clay building bricks sub class 'B' including removing of old bricks complete all as specified & directed.

Material and labour for sand cushioing with a layer of fine sand 8cm thick before laying of cable and 15cm thick after laying of cable in trenches complete all as specified & directed. Notes-:(i) Excavation and earth work to be measured and paid for separately. (ii)Thickness of 18cms after punning shall be considered for payment.

Boring of holes under road, pavement, hard standing by trenchless technique and necessary T&P for passing of LT/HT cables complete all as specified & directed.

Supply and fixing in replacement GI pipe light grade 40 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah including taking up old GI pipe complete all as specified & directed.

ANUJ ABROL CONTRACTOR (BID ID -3326132)

PK ENTERPRISES (BID ID -3318114)

PREM CONSTRUCTION COMPANY (BID ID -3338294)