SPECIAL REPAIR TO DM 01, 02, 07 AND 08 AND COOK HOUSE OF BUILDING NO 01/06/18 OF JAK RIF UNDER GE (NORTH) BINNAGURI

Amount

Dismantling floor, hearth or wall tilling including cement mortar being (but not backing) and rubbish off the premises complete all as specified and as directed.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick (square/ rectangular) area of each tile exc 0.18 sqm but not exc 0.36 sqm, as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15 mm thick screeding in CM 1:6 complete all as specified and as directed. Note:- (a) Design and pattern shall be approved by Engr-in-charge /GE at the time of execution of work. (b) Screed bed shall not be measured and paid separately.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15 mm thick screeding in CM 1:6 complete all as specified and as directed. Note : Screed bed shall not be measured and paid separately.

Material and labour for glazed ceramic coloured/digital printed of size 300 x 450 mm x 7 mm thick ) as in vertical surfaces of walls such as skirting/dado / riser to steps etc conforming to IS - 13712 grade IB-III set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including cement screed bed / backing layer of 10mm thick in cement mortar (1:4) complete all as specified and as directed. Note: Screed bed shall also deemed to be included in the quoted rate by the contractor.

Material and labour for Vitrified Ceramic joint free tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm to 1.00 sqm, vertical surfaces of walls such as skirting/dado / riser to steps etc over and including 10 mm thick screed bed/backing bed in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for water proofing treatment to sunken floor with the following course of treatment / specification :- (i) Cleaning top surface of floors / slabs and laying 50mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufacturer's instruction laid in slope 1:20 towards spouts including coveting corners. (ii) 15mm thick plastering in CM (1:4) on sides mixed with WPC as per manufacturers instruction. (iii) Applying 1st layer of slurry @ 0.488 kg/ sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg / sqm , this layer shall be allowed to air cured for 4 hrs . ( iv) Applying 2nd layer of slurry @ 0.242 kg/ sqm mixed with acrylic based polymer modified cementious compound @ 0.126 kg / sqm , this layer shall be allowed to air cured for 4 hrs followed with water curring for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces. (vi) Providing 150 micron thick polyutethene paint in two coats ( each of 75 micron measured dry surface over a coat of PU primer including preparation. (Make of PU primer- Dek guard EP - 302 of m/s Fosroc or equivalent approved brand . Make of PU paint- Dek guard PU or equivalent approved brand. (vii) Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage / seepage exists. (ix) Sunken portion shall be filled with lean concrete of grade M 7.5 stone aggregate. Note : Treatment shall be carried out by authorized applicator approved by the manufacturer.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 as in sub base using 40mm graded mechanically crushed stone aggregate complete all as specified and as directed.

M&L for 25mm thick pre-polished and chemically treated smooth finish exterior grade coloured chequered tile (300X300)as in path including 15 mm thick Screed bed in CM 1:6 complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. bedded and pointed in any mortar including removing of demolished material from work site complete all as specified and as directed.

Material and labour 15-18 mm thick Granite work ( table rubbed and polished) in steps , jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screeding in CM 1:4 including full rounding the exposed surfaces and provn of holes for gass pipe etc, complete all as specified. Note : Screed bed shall not be measured and paid separately. Note:- Granite colour shall be approved by Engr-in-charge /GE at the time of execution of work.

M & L for Diamond cut kota stone slab (Factory made polished) in flooring 18 to 20 mm thick area of each tile exceeding 0.18sqm over and including 20mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for kota stone slab 18 to 20mm thick in riser or steps, skirting, dado and pillar laid over 10 mm thick backing coat cement screed (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L for Mirror polishing on marble/ granite/ kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

M&L for double nosing and stepping stone 15 mm thick (in one piece per step) of colour as approved as in treads of stair case set and jointed in neat cement slurry over and including 10 mm thick screed bed for laying floor finishes in cement mortar 1:4 complete all as specified and as directed.

M&L for rolled mild steel framed work such as post, grills, gratings, etc. in repairs with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; and similar work of ornamental stainless steel of grade 304 as approved design/drawing etc complete all as specified and as directed.

Demolition of brickwork built in cement mortar including complete all as specified and as directed.

M&L for brickwork with fly ash bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete all as specified and as directed.

Demolition of Roofs, floors (as in RCC water tank) beams staircases, landing, chajjas, & similar suspended work Cement concrete (reinforced) complete all as specified and as directed.

M&L for RCC 1:1.5:3 Type A1 (using 20 mm graded stone aggregate) as in slab supported on walls chajjas complete all as specified and as directed.

M&L for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Dismantling trellis work (jafery), including taking it as under of battens in trellis (posts and rails measured separately) complete all as specified and as directed.

Taking down chowkat or frame n.exc 1.5 sqm each with shutters (without taking off shutters from the frames) including Builder's Hardware complete all as specified and as directed.

Taking down chowkat or frame exc 1.5 sqm but n.exc 4 sqm with shutters (without taking off shutters from the frame) including Builder's Hardware complete all as specified and as directed.

M & L for mild steel framed work as in doors frame of angle or other section conforming to Fe 410-W(Gde-E- 250)quality-A with gusset plates, rails, braces, etc. and including fixing of steel hinges or other door fittings complete all as specified and directed. Note: Door fittings like hinges, tower bolt etc shall be measured and paid separately.

S&F of pressed steel framed for door with one or more rebates including necessary fixing lugs, hinges, lock strike plates, size of frame 105 X 60 mm and thickness 1.25mm and making good disturbed surface of wall complete all as specified and as directed.

S&F in repairs 35 mm thick Flush shutters, solid core, construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

M&L for new surfaces of any description, not otherwise described, over 10cm width or girth with two coats of synthetic enamel paint over one coat of pink primer to wooden surfaces complete all as specified and as directed.

M&L for preparation of old painted to wooden and wooden based surfaces of any description not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint on the same complete all as specified and as directed.

M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Notes: (a) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. (b) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately.

M&L for Aluminium alloy anodised sliding door bolt 300mm long complete all as specified and as directed.

M&L for Aluminium alloy anodised handle fabricated 150mm long complete all as specified and as directed.

M&L for Aluminium alloy anodised barrel tower bolts 150 mm long complete all as specified and as directed.

S&F Butt hinges 100mm size, medium weight, cold rolled stainless steel complete all as specified and as directed.

S&F factory made pressed steel windows of standard size and section as shown on HQ CE Siliguri Zone Drawing No CESZ/2018/TD-07, Sheet 1/3 to 3/3 with glazing bars including all fittings like MS hold fast, box hinges, Handles , MS Tower Bolts, Stoppers, hinges, MS stay with long screw, MS spring latch, MS Guard Bar/ grill etc complete with glazing bars including one shop coat of zinc chrome primer and taking down old one complete all as specified and as directed. Notes:- (a) Rate quoted shall be deemed to be including of all fittings & fixtures. (b) Glass, wire mesh, MS Guard Bar/grill and painting shall be measured and paid separately under relevant items of Sch. (c) The Drawings referred above are available in the office of Engr-in-Charge and can be referred in the office working hours if required.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

M&L for preparation of old painted to steel surfaces of any description not otherwise described, over 10 Cm width or girth and applying one coat of synthetic enamel paint on the same complete all as specified and as directed.

S&F in repair aluminum anodized louvered ventilators with glass louvers, without sash bars, of aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down old complete all as specified and as directed.

S&F in repair anodised aluminium frame powder coated of size 100x44x1.5 mm thick made of square tubular coated aluminium section for doors with one or more rebates, jointing cleats for fixing etc and provision of aluminium door shutters (single/double) including jointing cleats, glazing clips, rubber gasket aluminium anodised snap beading, nylon wool pile weather strip, locking arrangement, handle of size not less than 200 mm,12 mm thick prelaminated partical board fixed in panels with Pivot stainless steel floor door closer for one shutter etc complete all as specified and as directed

S&F in repair powder coated aluminium window sliding type three track (one gauge and two glazed shutter) aluminium sections weighing not less than 0.55 Kg per mtr for shutter and aluminium sections weighing not less than 1.67 Kg per mtr for frame including necessary jointing cleats, glazing cleats, rubber packing, screws, handle, locking arrangement etc complete and 4 mm thick tinted glass and stainless steel mosquito proof gauge complete all as specified and as directed. Note: Standard size and section as shown on HQ CE Siliguri Zone Drg No CESZ/2018/TD-09 Sheet 1/8 to 8/8.

M&L for MS work framed work as in doors or gates of angle or other section with gusset plate, rails, brasses etc, complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including other hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete all as specified and directed conforming to Fe -290 (Gde - E-165) complete all as specified and as directed.

S&F of Curtain rod of stainless steel 25 mm dia chromium plated with fixing brackets, stop, rollers etc, clamps etc complete all as specified and as directed.

S&F in repair stainless steel curtain rod holding brackets heavy duty fixed to wall with stainless steel screws etc complete all as specified and as directed.

S&F in repair stainless steel finial type fancy stop and suitable for curtain rod 25mm dia etc complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5sqm in each pane complete all as specified and as directed.

S&F Mild steel framed work such as grills, gratings, guard bar etc with ends of bars shouldered or riveted or for forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290. Gde -E- 165 complete all as specified and as directed.

M&L for repairs to existing steel window such as repair to handles, left/right stove enamelled black with nut bolt & washers etc easing out complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm complete all as specified and as directed.

M&L for preparation of previously treated steel surfaces any description over 10 Cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410mm x 330 mm x 160 mm complete all as specified and as directed.

S&F in repairs chrome plated 15mm sink cock (wall mounted) with 165mm long swivel spout and wall flange, complete all as specified and directed. Make: CERA Cat No. F1017251 or techno commercially equivalent makes as listed in List of Maks as approved by the GE.

Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for Rendering 15mm thick in CM (1:6) on concrete/brick wall surfaces finished even and fair without using extra cement complete all as specified and as directed.

M&L for 5mm thick plaster rendering on fair faces of concrete surfaces as in ceiling in CM(1:3) finished even and fair (without using extra cement) complete all as specified and as directed.

M&L for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work with water proofing compound @200 ml per bag of cement or as per manufacturer's instructions finishing the surface even & fair without using extra cement complete all as specified and as directed. Note : Supply of liquid Water Proofing Compound shall be measured and paid separately under relevant item of this Schedule 'A'.

Supply only liquid water proofing compound conforming to IS: 2645 - 2003 complete all as specified and as directed.

M&L for preparation of newly plastered surface applying two coats of oil bound distemper over a coat wall care putty over plastered surfaces including priming the surface complete all as specified and as directed.

All as per item No 60 above but on ceiling complete all as specified and as directed.

M&L for applying two coats of exterior emulsion paint (weather coat) over a coat of exterior primer on a new plastered surfaces of walls including projection, RCC jalies & post etc including necessary preparation of surfaces complete all as specified and as directed.

M&L for preparation of old plastered or unplastered surfaces, oil bound distemper surfaces of walls including cornices, pilasters and other wall features etyc by washing rubbing down and stopping and applying and finishing the walls with premium acrylic smooth exterior paint with silicone additives of required shade (luster paint) applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @2.2kg/10 sqm complete all as specified and as directed.

Material and labour for preparation of old decorated distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying two coat of acrylic based distemper of any tint/shade over a coat of wall care putty to get a even and smooth surfaces of walls complete all as specified and as directed.

All as per item No 64 herein above but on ceiling complete all as specified and as directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest complete including provision of lime concrete bedding complete all as specified and as directed. Make: CERA Cat Part No. S3020105 or techno commercially equivalent makes as listed in List of Makes as approved by the GE.

Supply and fixed in repairs white vitreous china wash down water closet pan (pedestal pattern) EWC with ‘P’ or `S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device, including making all necessary connections complete all as specified and as directed.

S&F in repairs 15mm dia fancy type Bib taps, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixed 15 mm bore fancy type bib taps long body (two in one) cast copper alloy single handle and wall flange chromium plated screwed down complete all as specified and as directed. Make:- CERA Cat part No. F-1015163 or techno commercially equivalent makes as listed in List of Makes as approved by the GE.

Supply and fixed in repair CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.20 m long flexible tube and ABS wall hook complete all as specified and as directed. Make: CERA, Cat Part No. F-8030401AB or techno commercially equivalent makes as listed in List of Makes as approved by the GE.

S&F in repair 10 ltr capacity PVC flushing cistern low level white colour including PVC connection PVC flush pipe of required length CI brackets nin lieu of old unserviceable push button flushing Cistern all as specified and directed.

Supply & fixed in repair, Vitreous china half stall urinal, bowl type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing utomatic flushing cistern with brackets, with flush pipe, grating and union for discharge pipe (excel flushing cistern, flush pipe and waste pipe) complete as specified and as directed.

S&F in repair 100mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4), type B1 complete all as specified and as directed.

S & F in repairs vitreous China Ware counter sunk Wash hand basin white, flat back, size 550 x 400 mm size including CP waste coupling, PVC connection 450 mm long, waste pipe removing the existing basin, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.

S&F in repairs15 mm bore pillar taps, capstan head, cast Copper alloy, chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

Supply & fixed in repairs angular CP Stop valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed in repair complete all as specified and as directed.

S&F in repair MS CP towel rail 600 mm long complete all as specified and as directed

S&F in repairs fancy type Chromium plated Stop valves long shank and cup(concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in iron pipe 15mm bore complete all as specified and as directed.

S&F in repair 15mm bore chromium plated shower rose with arm (size of arm 195mm long with bend to 45 degree) complete all as specified and as directed.

Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed.

Refixing old 15mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and as directed. Note: The serviceable GI tubing obtained from taking down shall be reused.

S & F 15mm bore medium grade galvanized tube with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site complete all as specified and as directed.

Refixing old 20mm bore steel tubing and connections in new or old position (walls, ceiling, floors etc.) complete all as specified and as directed. Note: The serviceable GI tubing obtained from taking down shall be reused.

S & F 20mm bore medium grade galvanized tube with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Taking down PVC/AC soil pipe including fittings as in wall of any dia complete all as specified and as directed.

S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and as directed.

All as per item No 87 above but for 75 mm complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

Supply and fixed rolled mild steel work in hollow tubular / square / rectangle section as in roof trusses, (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to IS 1161-1979 grade St-240 complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling existing PVC water tanks exc. 500ltrs and n. exc. 1000 ltrs complete all as specified and as directed.

S & F 1000 ltrs rotational moulded polyethelene water storage tanks triple layer (cyclindrical vertical with closed top) including connecting up pipes securing access covers etc complete all as specified and as directed.

S&F in repairs 25mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and as directed.

S&F in repairs gun metal, globe or gate valve with iron wheel head, screwed both ends for 20mm bore GI pipe complete all as specified and as directed.

Taking down existing roof treatment (water proofing membrane etc) including screed bed complete from roof surfaces including parapets and lowering and removing the same to a distance exc. 50 m and n. exc. 100 m including roughening of old concrete surface of roof by wire brushing and cleaning the surface to remove all loose dust, etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces with cement mortar (1:4) mixed with liquid water proofing compound @200 ml per bag of cement or as per manufacturer's instructions order to maintain proper slope over existing roof surfaces, rendering is to be finished even and smooth (without using extra lime or cement) for laying brush bond waterproofing coating complete all as specified and as directed. Note:- Water proofing treatment shall be paid and measured separately.

M&L for providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Roof Guard or techno commercially equivalent makes as listed in List of Makes as approve by the GE in 4 coats of application (a) applying primer coat with Primer @ 0.3 kg /sqm (b) over priming coat applying roof guard as specified below or manufacturer instructions with fibre reinforcement a width of approx. 1m @ 0.75kg/sqm on the flat or vertical surfaces over parapet wall and ensure that there are no bubbles of creases. Overlapping of the fibre is a minimum of 50mm and allow this coat to dry for a period of 2-6 hrs depending on the atmospheric condition. (c) Applying second coat of roof guard or techno commercially equivalent makes as listed in List of Makes as approve by the GE @0.75Kg/sqm. (d) Applying final coat of primer @ 0.08kg/sqm after 2nd coat has dried properly. Note : Water Proofing treatment shall be carried out by authorized applicator approved by the manufacturer.

INTERNAL ELECTRIFICATION Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L for point wiring complete for one power point for one metal plug & socket for AC/Geyser point on independent board with 4.0 sqmm multistranded copper conductor single core PVC insulated unsheathed FR LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non metallic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.00 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for metal plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) with proper colour coding as earth continuity conductor connected to common earth dolly, MS sunken terminal box of appropriate size suitable for piano type switch/fittings concealed in walls, with sheet back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles complete all as specified and as directed. for the following :-

One light point controlled by one way switch 5/6 amps complete all as specified and as directed.

One ceiling fan/Exhaust fan/Wall Fan point controlled by one way switch 5/6 amps complete all as specified and as directed.

One socket out let 5/6 amps point on the independent board complete all as specified and as directed.

One socket out let 5/6 amps point on the same board complete all as specified and as directed.

All as per item No 103 above but wiring with 2.5 sq mm single core multistranded copper conductor including provision of 2.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) with proper colour coding as earth continuity conductor connected to common earth dolly , for one socket out let 15/16 amps point on the independent board complete all as specified and as directed.

S&F switch piano flush type 5/6 amps single pole one way complete all as specified and as directed.

S&F Switch socket combination 2 and 3 Pin, 5/15 amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and as directed.

S&F socket 2 in 1, 5 Pin, 5/6 amps, white ivory finish flash type complete all as specified and as directed.

S&F Switch socket combination 2 and 3 Pin, 5/6 amps, multipurpose flush non shutter, non inter locking type white ivory finish with, complete all as specified and as directed.

S & F in deluxe fan Electronic regulator 120/280 volts AC 50 Hzs rotary step white/ivory finish complete all as specified and as directed.

S & F lamp holder, insulated body, with back plate suitable for batten/angle fittings complete all as specified and as directed.

S&F LED white glass Lamp 1x9 Watt 230V Base-22 complete all as specified and as directed.

S&F in ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and as directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S&F IP 20, Class I, LED Mirror light fitting 1 x 9 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser, integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed.

S & F Energy saving new generation environmental friendly long life versatile pressure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete including removal of old unserviceable fitting complete all as specified and as directed.

Taking down carefully ceiling fan from its original position and refixing / hanging after plaster work including painting of ceiling fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc complete all as specified and as directed.

Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 6.0 sq. mm + 1 x6.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unserviceable aluminium submain wiring all as specified and as directed. Note: Two runs of 4 sqmm conductor for main and one run of 6 sqmm conductor as earth wire with proper colour coding including one run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB"S/lsolators with and including taking down old one complete all as specified and as directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 8 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including taking down old one complete all as specified and as directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 4 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, earth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface including taking down old one complete all as specified and as directed.

S&F MCB, Triple pole & neutral 63 amps, 240 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unserviceable one complete all as specified and as directed.

M & L for sheet metal enclosure fabricated out of 2.0 mm thick CRCA sheet, totally enclosed type, dust & vermin proof, with suitable sized supporting MS angles & suitable openings at top & bottom for entry of outgoing / incoming cables, fixed with nuts & bolts & front side openable with hinged shutter with suitable locking arrangement duly painted with 2 coats of powder coated paint over a coat of red oxide primer (spray paint) with minimum dimensions (90 x 75 x 20 cm ) flush to wall for incorporating 01 No TPN DB, 04 Nos electronic meters etc complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, including necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel complete all as shown in electrical plate No 3 of SSR Part- I including testing on completion all as directed and as specified.

S & F for SPN enclosure with two pin and earth plug and socket with 240 volts 32 Amp SPN MCB including removal old unserviceable one complete all as specified and as directed.

M/s. RAMPHAL GARG (BID ID -3132519)

M/S ALOKE CHAKRABORTY and CO (BID ID -3132692)

SS SHARMA (BID ID -3132949)

SINGH & CO (BID ID -3132490)

M/S SINHA ENTERPRISE (BID ID -3132244)

M/S RATNESH KUMAR SINGH (BID ID -3132757)