SR of Street Light Work in near Trauma Center Road, B. J. Medical Road, OPD Building Road, T.B Hospital Road, Nursing College Road, Dental Campus Road, Paraplegia Road, 1200bed Hospital etc at Civil Hospital Campus Asarwa Ahmedabad

Name Of Work :-

Dental Campus Road, Paraplegiya Road, 1200bed Hospital etc at Civil Hospital Campus Asarwa Ahmedabad.

Memorandum showing items of works to be carried out

Quantities Estimated Total Amount

Quantities Estimated Total Amount

It estimated but Rates According to

Item of Work Unit

No. may be more In Figure estimated quantities

or less Rs. Ps. Rs.

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI

Rupees Forty Six Paise Forty Six

1 500.00 marked copper wires of following size to be erected as directed.(e) 1.50 Sq.mm 3 core round 46.46 Mtr.

(h) 2.50 Sq.mm 3 core round PVC sheathed Rupees Seventy Seven Paise

Seventy Seven Only

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire Rupees Six Thousand Five

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 hundred Sixty Six Paise One Only

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (iv) 120 wattsCat-lll

Supplying and erecting LED street light / Flood light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or embossed 160 to 270 V,Power

Rupees Seven Thousand Two

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

4 10.00 7266.95 hundred Sixty Six Paise Ninety Five Ea.

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line

supply with over-voltage protection. (iv) 120 wattsCat-lll

(vii) 250 watts Cat-lll

Rupees Ten Thousand Eight

hundred Eighteen Paise Eleven Only

Repairing of existing indoor LED light fixture(flood light/street light/bollard lights/decorative

wall lights/landscape light etc as per sample )by suitable driver 4 kv,IP65 according to LED

PCB as per requirement of following rating wattage capacity .

(H) 90-250 watt capacity Rupees One Thousand Three

200.00 1344.31 hundred Forty Four Paise Thirty Ea.

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on

Rupees One hundred Twelve Paise

6 170.00 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. 112.11 Ea.

confirming to IS 8828/1996 with ISI Mark Cat III

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA

Rupees Six hundred Thirty Eight

7 6.00 breaking capacity & confirms to IS :8828 in existing box having following capacity (b)40 Amp 638.32 Ea.

Paise Thirty Two Only

Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. Rupees Seventy Seven Paise

Seventy Seven Only

Providing and erecting Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

Rupees Eight hundred Twenty

9 12.00 necessary coupling buch buried in specially prepared earth pit & G.I. earth wire of 8 SWG 823.15 Ea.

Three Paise Fifteen Only

erected & connected as directed (For panel)

For using salt and charcoal / coke as required for pipe type earthing. Rupees One hundred Seventy One

Paise Seventy Only

Painting the number and words for inventory Identification on erected fittings / equipment’s or

11 Such accessories as may required with good quality of enamelled paint as directed by

engineer in charge.

(i) up to 20 characters, up to 50 mm height. Rupees Twenty Two Paise Twenty

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of Rupees One hundred Fifteen Paise

following size of cables including Cable Gland & Lugs Fourteen Only

(A) 4 core 4 Sq. mm

(C) 4 core 10 Sq. mm Rupees One hundred Forty Paise

Thirty Nine Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium

14 conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of

following size of cables including Cable Gland & Lugs

(B) 4 core 25 Sq. mm Rupees One hundred Ninety Paise

Eighty Nine Only

Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the fault

Rupees Fifty Five Paise Fifty Five

15 100 all over the run and back filling the same and making the surface as normal ground. 55.55 Mtr.

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for

Rupees Seventy Four Paise

16 70 laying any size of cable or locating the fault all over the run and back filling the same and 74.74 Mtr.

Seventy Four Only

making the surface as normal ground.

(B) If additional machinery like hammer driller or JCB use [Add] Rupees Three hundred Fifty Seven

Paise Fifty Four Only

Drilling the road without breaking the road surface (Asphalt) for laying of cable for feeding

power supply by making up to following size of holes at both ends complete.

(A) Up to 100 mm bore dia Rupees Four hundred Ninety Two

Paise Eighty Eight Only

Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of cable. below ground / road surface

for enclosing cable

(A)50 mm outer dia Rupees Sixty Two Paise Sixty Two

Providing and erecting street light pole bracket comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B Class G.I sleeve tubing of approx.

45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient

fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per Rupees Seven hundred Ninety Five

site condition & suitable welded stiffener reducer and nipple with check nut complete painted Paise Eighty Eight Only

with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint

with following nos of arms. [a] Single Arm bracket 2 Mtr

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for

mounting mob & hinged doors as per requirement having locking arrangements with Rupees Five hundred Forty Three

mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& Paise Thirty Eight Only

earth bolt of following size of box. (F) 200mm x 180mm x 100mm [deep]

(A) 300mm x 200mm x 100mm [deep] Rupees Eight hundred Ninety Eight

Paise Ninety Only

Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel of

following capacity for switch On-Off street lights on time scheduling basis made from 16G

CRCA sheet duly epoxy power painted inside and outside with hinged doors and locking

arrangement consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat-III)with

analog time switch, auto manual switch of same make and suitable input and output Bakelite

terminals and with door earthing approved by Engineer in charge.

Rupees Thirteen Thousand Three

hundred Fifty Paise Eighteen Only

(C) 63 Amp Rupees Seventeen Thousand Fifty

Nine Paise Ninety One Only

Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S.

Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be buried in

23 ground to have appropriate erection to work uniform until erected with cement concrete

foundation and 45 cm high bricks work finishing with plaster etc. hinged double door

internally supported on both side,

with internal and outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm

M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet.

Painting the Section Pillar inside and out side with three tank powder coated paint. section

pillar roof should be without joint with water leakage proof & tested as per IP 55 test &

followed by IS 2147 of

(A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron legs Rupees Sixteen Thousand Six

2 95 cm long made from 40 X 40 X 6 mm thick MS angle. 16691.26 hundred Ninety One Paise Twenty Ea

(B) 75 X 60 X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs 45 Rupees Three Thousand Five

24 1 cm long made from 35 X 35 X 5 mm thick MS angle. 3595.60 hundred Ninety Five Paise Sixty Ea

Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness

(D) 8mm Rupees One Thousand Five

3 1541.26 hundred Forty One Paise Twenty sq.mtr

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S.

sheet, dust & vermin proof having hinged door with rubber gasket and necessary busbar

supports with Aluminium busbar having current density not more than 0.8 Amp. / sq.mm

26 (Rated current / cross section area) duly wrapped with colour insulation tape for phase

sequence, three phase & neutral each Suitable for following current capacity with necessary

painting mounted on wall or pedestal frame of required size with necessary connections.

(A) Suitable for 63/ 100 Amp. Capacity Rupees Two Thousand Six

2 2602.77 hundred Two Paise Seventy Seven Rn.Mtr

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA

27 breaking capacity & confirms to IS : 8828 in existing box having following capacity 0.00 Rupees Only

(A) 6 to 32 Amp. Cat III Rupees Two hundred Seventy Eight

Paise Seventy Six Only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Rupees Seven hundred Thirty

(c)63 Amp. Seven Paise Thirty Only

I/We am / are willing to carry out the work at …………………………………………………………………………………………………………………………………………. % above / / below percent (should

Estimated Amount Estimated Amount

Put to tender Rs. …………………………………………. Put to tender Rs. ………………………………

Deduct …………… % below Rs. …………………………………………. Add …………… % above Rs. …………………………

(* Plase strike out whichever is not applicable.)

Note - 1 All works shall be carried out as per public works department handbook and other specification of division or as Directed

Note - 2 All the columns in Schedule should be filled in ink and the total of the entries in the last column should be struck by the contractor under his singature.

Note - 3 Rate quoted include clearance of site( prior commencement of work and at its close) in all respects and hold good for work under all condition, site, moisture, weather etc.

Note - 4 To be continued on additional sheets, if found necessary.

Deputy Executive Engineer (Elect.) Executive Engineer (Elect.)

PIU, Ahmedabad PIU, Ahmedabad