Zpgf 2026-27

Name of the work:-Completion of incomplete DWCRA Building at Palangi(V) of Undrajavaram (M), Est.Rs. 12.00 Lakhs,15%W&CW ZPGF 2025-26 Funds Earthwork excavation and depositing on bank with initial lead and lift etc complete for Entrance Steps

Plain Cement Concrete in (1:4:8) proportion nominal mix (Cement : fine aggregate;Coarse aggregate) using 40 mm size HBG SS5 machine crushed metal with concrete mixer including cost and conveyance of all materials like cement,sand 9unscreened),coarce aggregate,water etc.to site,all operational.incidental,and labour charges such as mixing,laying and ramming concrete in layers in position not exceeding 15 cm ,finishing top surface,curing concrete,complete for Flooring Bed (APSS NO.402)

Brick masonry for panel walls in Basement with CM (1:6) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).Ground Floor

OrnamentalPlastering with CM (1:3) 8mm thick including cost and conveyance of all materials and all labour charges etc., complete for ceilings

Brick masonry for panel walls in Basement with CM (1:8) prop: (Cement : Sand) using common burnt clay bricks of class as per Table- I of IS:1077-1992, Non- Modular or traditional size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, screened sand, bricks, water etc., to site, labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 501 & 504).

Plastering with CM (1:5), 12 mm thick including cost and conveyance of all materials and all labour charges etc., complete for Inside and Outside of Building Ground Floo

Providing and applying Wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, over heads and contractors profit etc., complete for finished item of work in all floors for internal walls

Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 12mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance charges of all materials excluding seigniorage charges and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Cost,and supply&fixing of R.C.C Ventilators of 25 mm thick including cost and conveyance of all materials and labour charges etc complete.

Cost and supply of MS Grills with MS flats and squares including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete.

Supply &fixing of Flush Door Double shutter of size 1.2 x2.1mt with block board type with commercial ply on both faces 30mm thick with frame made of well seasoned sal wood scantling of size 10 x75 mm including cost & conveyance of all matearial and labour charges as per specification (APSS NO.1001&1002)

Flooring with virtified polished Floor Tiles of ! St quality and make as approved by Engineer in charge of size not less than 598 mm x 598 mm, 8 mm thickness regular finish and normal colours with borders and design as per the approved flooring pattern as directed by the Engineer-in-charge,laying tiles using spacers of 2mm thick set over a base coat of CM (1:8) prop,12 mm thick using screened sand over CC bed already laid on RR roof slab,including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed neatly with white cement paste to full depth mixed with pigment of matchingshade including cost and conveyance of aa materials like cement,sand,water,tiles,white cement etc.to site (excluding cost of CC bed) including cost of all materials,cost of base coat and all labour charges for mixing of cement mortar,laying tiles to required slope as directed by the Engineer-in-charge etc.and over heads & contractors profit but excluding seignorage charges & VAT complete for finished item of work (APSS NO.701 & 707) Ground Floor

Providing Skirting to internal walls to 10 cms height with Virtrified Tiles 8 mm thick regular finish and normal colour,length equal to flooring tiles set over base coat of CM (1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth including cost of all materials like tiles,cement,sand and water etc and over heads & contractors profit but excluding seignorage charges & VAT complete for finished item of work (APSS NO.701 & 707).Ground Floor

Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for internal walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors.

Supply & application of one coat water based cement primer of exterior grade II and two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads anduPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge.Three track three panels sliding window with fly proof SSwire mesh (Two nos. glazed & one no.wire mesh panels) made of (small series) frame 92 x 44mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriated imension (Area of window up to 1.75 sqm) MAT -05448Ground Floor

Supply and Fixing of 25mm dia 1.80mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Make : Sudhakar/ Maco Plast / Modi

Supply and Fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned TW box including all labour charges etc., complete. Make : Sudhakar/ Maco Plast / Modi

Supply and run of 2 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Supply and run of 2 of 14 /0.3mm (1.0 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for earth continuity and invertor including all labour charges etc., complete.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm)Finolex F.R P.V.C. insulated flexible copper cable in existing pipe from mains to MSB's inlcuding all labour charges etc.,

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose excluding modular cover frames including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

Supply and errecting Modular type Electronic stepped type regulators for Ceiling fans complete errected on existing board(single modular)

Supply and fixing of 6A 3 pin wall plug Modular socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete using Modular Switches and Sockets

Supply and Fixing of 16A or 20A, Modular socket with 16A or 20 A switch control modular type with front cover plate including all labour charges etc., complete.

Supply and fixing DP SPN Distribution board with IP-30 protection suitable for Single phase DP Isolator 40A as incomer and 10 kA - 6-32A range SP with MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., complete.

Supply & Fixing of 1200mm (48") sweep 230V, A.C 50 Hz. ceiling fan with 3 blades and double ball bearings with all standard accessories including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges without bulb (for new installation).

Supply and fixing of 18-20 W, not less than 1100mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with Earth Connection

Supply , Fixing & Transportation of 1.0 HP Single Phase Mono Block CI Body Motor Pumpset Supply and erecting approved make centrifugal water pump including all Labour charges for fixing complete for finished item of work. 1.00 HP SP Motor Makes (ELEC-5.4.11 CATEGORY- I) : Crompton / Texmo / Havells Hi-flow V2