Establishment of New Rythu Bazaar in the Market Yard, Nagalapuram in Tirupathi District

Earth work excavation in foundation for Buildings and depositing the earth on bank with an initial lead of 10 M and lift of 2 M in loamy, clayee soils like Black Cotton, red earth, ordinary gravelly soils excluding rock, including shoring, strutting, sheet planking, and bailing out water etc., dressing the bottom of foundation with uniform surface in all directions and thoroughly rammed before laying of concrete etc., complete. for foundations

PCC (1:5:10) using 40mm nominal size HBG machine crushed metal as per SS108, machine mixing, concrete laying in position in layer not exceeding 150mm in thickness, including cost and conveyance of all materials and water to work site and all operational incidental labour charges such as mixing concrete, laying compacting by using vibrator, curring including all taxes etc., complete for finished item of work.

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Footings

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Pedestals upto GL Beam

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Ground level beam

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Plinth Beams

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work. For Columns

Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Providing High yield strength deformed bars of Fe 500 grade of different diametres, cuttings and bending to the required sizes and shapes, placing in position with cover blocks of approved materials and sizes tying firmly with MS binding wire forming grills for reinforcements work as per approved drawings to be supplied at the time of execution of work, including cost and conveyance of deformed bars, labourcharges such as cutting, bending, placing in position, etc., complete for finished item of work (payment will be made on the basis of weight of fabricated deformed bars only) as per standard specifications

Filling with carted gravel in foundations for bed and in basement in layers not exceeding 150mm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges all taxes etc., complete for finished item of work

Filling with stone dust 2.36mm in foundations for bed and in basement in layers not exceeding 150mm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges all taxes etc., complete for finished item of work

PCC M20 using 20 mm HBG / HBT machine crushed metal and screened sand including cost and conveyance of all materials to site from approved source, centering machine mixing, laying concrete in position vibrating curing for required period labour charges for all items of work but excluding cost of steel and its fabrication charges and including all other Incidental & operational charges etc., complete as per standard specifications

Brick Masonry work in CM(1:6) prop with fly ash with cement solid blocks of size 290x225x140 mm for manfacturing of fly ash of 75 kgs, cement of 15 kgs ,Gypsum of 5 kgs and stone dust including cost and covyance of all materials, labour charges , seiniorage charges ,scaffolding,curing charges with compressive strength not less than 50kg/Sqcm for walls for super strucure walls

Fabrication, Supply and fixing of 76 mm x 38 mm x 2.50 mm of Medium guage M.S.Rectangle pipe for bottom and top chords and 38mm x 38mm x 2.90mm thick medium guage inclineds with 10mm thick baseplate of size 0.23 x 0.23mm x 10mm thick and 6mm thick cleats of size 150mm x 60mm including welding fabrication fixing in position with necessary bolts, nuts washers, including cost of MS pipes with welding cutting and loading, unloading charges fabrication and erection and cleats including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work. At 3Nos new shops

Supply and Fixing of MS Rectangle Purlins of size 60mm x 40 mm x 2.90mm thick of 4.00 m long medium guage by welding of 6mm thick cleats of size 150mm x 65 mm on both sides of the pipes in position with necessary bolts and nuts washors including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

Plastering with CM (1:5) 12 mm thick including cost and conveyance of cement and all other materials and labour charges for mixing and making surface neatly to plumb, scaffolding charges, curing etc., complete including all incidental and operational charges and all water leads and lifts etc., complete for finished item of work and as directed by the Engineer – in – charge at site for external surface as per standard specifications.

Supply and fixing in position M.S Ornamental Grill Gates using M.S flats, square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in RCC or Masonry works and making good the same where ever necessary, including cost and conveyance of all materials, labour charges and all other incidental and operational charges etc., complete as directed by the departmental officers.

Supply and fixing of 12mm dia 0.60 m long mild steel foundation bolt with necessary thread, bolts, nuts and washers and placing them in position including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - acrylic emulsion paint - 2 Coats+1 coat primer

Painting with best Synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers.

Supply and fixing of 25mm dia 1.8mm thick P.V.C. Pipe (ISI MARK) outside in wall with all required accessorice including masonary work for light, fan and separate plug point with well seasone wooden deep box incluidng all labour charges etc., complete make:sudhakar/modi.ISI as per standard data.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Light point as per standard data.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Fan point as per standard data.

Supply and fixing of 6A 3 Pin wall plug socket with 6A switch control on a common switch board with earth continutity including wire leads, earth connections along with all labour charges etc., complete as per standard data.

Supply and run of 2 of 22/0.3mm (1.5 Sqmm) FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete as per standard data.

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete as per standard data.

Supply and fixing of Distributions board with 20A single phase plug and socket in sheet steel enclosure with 10/16A/20A SP MCB including internal connections and all labour charges for suface/monty etc., complete

Supply and fixing of Electrical fan regulator on existing common switch board, including all internal connections and labour charges etc., complete

Supply of 1200mm (48”) AC 230 V 50HZ ceiling fan with three blades and double bar bearings with standard accessories without regulator etc., complete.

Supply and fixing of 20W LED Tube light luminaire (on existing light point connection) including all labour charges etc., complete

Supply of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer’s specification