Provision for Electrical and Plumbing arrengements work at Puthur comercial complex in ward no.27

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

S/F in position of indian make white/ colour glazed earthen ware lipped mouth Flat back Urinal of size 430 x 260 x 350mm of best approved quality with G.I pipe connection suitable length, 32 mm bell mounte PVC connection, 15mm dia G.M.wheel valve, fixing the urinal to the wall in position with necesssary T.W.plugs, clamps, screws, shellac etc. including dismantling masonry if necessary and redoing the same to original condition, fixing the 15mm dia G.I.pipe connection and wheel valve, painting the pipes with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications- white colour

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Clay burnt Bricks of size 9” x 43/8” x 23/4” with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. - CLEAR SIZE 0.60 X 0.60

Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Paint specifications: Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Dimensions: The section should be of 37 x 53mm for frame vertical, 37 x 53mm for frame horizontal section and section for reinforcement should be of 31 x 55mm. glass holding section should be of 37 x 37mm for top and bottom grids in between should be of 37 x 18mm. sqm. Accessories: Brackets made of CRCA powder coated / electro plated should be used to fix vertical at top and bottom and vertical to slab as per site requirement. Polyurethane brackets should be used to connect horizontal section to vertical sections. Silicone: Natural cure, with good UV resistance to be used. The above frame should be fixed to brick / concrete masonry by using nylon self–expanding cap and driving MS electro plated 80mm long screws into the caps through frames. Glass: 5mm reflective Saint Gobain OR equivalent.SOR 2023-2024;(PAGE NO;68 & UNIQUE CODE ; M-0671 p.no;68

Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc (Manually Operated (up to 8 sqm. Area))M-0401

Supply of following water supply materials and specials with I.S.I mark etc., complete.

32mm dia UPVC pipe

25mm dia UPVC pipe

32mm dia UPVC Union

25mm dia UPVC Union

32mm dia UPVC Elbow

25mm dia UPVC Elbow

20mm dia UPVC Elbow

32mm dia UPVC Tee

25mm dia UPVC Tee

20mm dia UPVC Tee

32mm dia UPVC Coupling

25mm dia UPVC Coupling

20mm dia UPVC Coupling

UPVC Adhesives

Supplying and fixing of required capacity PVC tank of approved quality including cost of all materials like tank fittings, lead .lift, errection etc complete. Sor 2023-2024 unique code ;M-0540 p.no;54

Suppling and fixing in position 15mm.diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary

Supply and Fixing in position of 15mm diameter of Cp Angle Cock of approved make confirming bis specification and quality including cost of shellac ,thread etc.complying with standard specification and including cutting and threading wherever necessary etc., complete. (Unique code ;M-0529,p.no;54 pwd sor 2023-2024)

Supply & Fixing in position of 15mm Φ diameter brass cp two way bib cock with health facet approved make confirming bis specification and quality including cost of shellac ,thread etc.complying with standard specification and including cutting and threading wherever necessary etc., complete.approved make confirming bis specification and quality including cost of shellac ,thread etc.complying with standard specification and including cutting and threading wherever necessary etc., complete.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm dia PVC Pipe 6 Ksc

110mm dia PVC Pipe 6 Ksc

160mm dia PVC Pipe 6 Ksc

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

75mm dia PVC Tee 6 Ksc

110mm dia PVC Tee 6 Ksc

160mm dia PVC Tee 6 Ksc

75mm dia PVC Elbow 6 Ksc

110mm dia PVC Elbow 6 Ksc

160mm dia PVC Elbow 6 Ksc

PVC Adhcesvies

Colour washing two coats in all floors using best freshly burnt white shell lime and best quality of approved variety of colouring pigment including cost of lime, colouring pigments, fevicol type gum, brushes, scaffolding charges etc., complete complying with standard specification. Mineral colouring pigments not affected by lime should only be used (stainers and colour solutions should not be used.)

Wiring with 2 x 1.5 sq.mm.(22Nos/0.3mmDia) PVC insulated single core unsheathed copper conductor cable of 1100 Volt Grade in suitable PVC rigid pipes concelaed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with T.W. switch box and 5Amps Flush Type Switch and making good of the concealed portion with suitable colour for PVC concealed LIGHT / FAN point. (for electronic regulator) (% points per coil) (SD 24)

Wiring with 2 x 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade insuitable PVC rigid pipe concealed inwall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet for15A 3 pin non inter locking wall socket with 15A flush type switch with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed power plug point (SD 40)

Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V gradein suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A3pin non interlocking wall socket with 5A flush type switch with continuous earth wire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour for concealed PVC plug point ( SD-38)

Supply and fixing of 4Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting (SD - 442)

Supply and run of 3x4sqmm (56/0.3) PVC insulated SC unsheathed Cu. conductor cable of 1100 V grade in suitable heavy gauge MS conduit pipe concealed in wall and the celling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour - SD 47 page 30

Supply and fixing of Miniture circuit breakar 240v/415v 50hz Ac supply suitable for both lighting and motor circuit with 1 no. Higher end single pole 6A to 32A MCB as outgoing on wall with earth connection only -higher end 10KA

Supply and fixing of Miniture circuit breakar 240v/415v 50hz Ac supply suitable for both lighting and motor circuit with 1 no. Higher end single pole40 MCB as outgoing on wall with earth connection only -higher end 10KA

supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting .(sor 2023-2024 unique code; m-1285,p.no;121)

Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection sd-161 p.no ;167

Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection sd-161 p.no ;167

Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection sd-161 p.no ;167

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Lower End (SD-519)

supply and Laying of CABLE TRAY;Gi hot dip/powder coated 16swg cable tray with 150mm width and 50mm height (unique code ; m1644;p.no;136)

Supply and erection of 10 person carrying capacity of passenger lift of car inner size 1300 x 1350 for (G+3 Floors) (i.e) 12 m travel height with speed of 1.00 Mtr second with ARD, the entrance on each floor, with machine room and gear less operation and the lift well size is 2150 x 2100 mm and with 1 no of circular fan, LED Light Fitting. The landing entrance opening with sliding door and made up of Stainless Steel SS 304 grade Harilline Finish. the Litf Make will be of Johnson/ kone/ OTIS/Equivalent