Annual maintenance of buildings from PPV toll gate to Papavinasanam for the year 2026-27.

Demolishing and disposal of unserviceable materials within 100 meters lead - Unreinforced cement concrete up to 15cm thickness. -do- up to 15 cm thickness

Demolishing and disposal of unserviceable materials within 100 meters lead - Unreinforced cement concrete more than 15cm thickness

Demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres for Brick work

Dismantling, clearing away and carefully stacking materials useful for re-use, stone masonry in cement mortar

Dismantling doors, windows and clear storey windows, ventilators etc, (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., complete and stacking them within 100 metres lead. Not exceeding 3 sq.m in area. -do- Not exceeding 3 sq.m in area

Dismantling, clearing away and carefully stacking materials useful for re-use, through scraping of old plastered surface

Clean removal of cement plaster from walls and raking out joints 20 mm deep and removing debris.

Conveyance of excavated surplus earth/debris to a distance 2 kms from the site of work at the place specified by the Engineer-in-Charge including loading and unloading etc., complete as directed during execution.

Supply of machinery in desilting works guide lines for engaging Excavator - Loader (JCB) (Capacity / out put of machine 0.24/1 Cum) 1. The owner should transport the JCB to the work spot at his own costs 2. The Excavator - Loader (JCB) should excavate a minimum of 40 cubic meter of Earth per hour. 3. The Excavator - Loader (JCB) should load 20 tractor as per hour with quantum of 2.83 cubic meter of loose factor per each tractor. 4. The rate per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the Excavator - Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above. 6. The Excavator - Loader (JCB) should have the Tacho meter and it should function properly.

Hire charges for Tractor

Supply of quarry rubbish (35a) including cost and conveyance of all materials, incidental charges etc. complete.

Supply of Man / Woman Mazdoor required for maintenance work and other emergency works as and when entrusted by the department during execution.

Supply of Masons 2nd class required for maintenance work and other emergency works as and when entrusted by the department during execution.

Supply of Carpenters 2nd class required for maintenance work and other emergency works as and when entrusted by the department during execution.

Supply of Carpenters helpers (Mazdoor) required for maintenance work and other emergency works as and when entrusted by the department during execution.

Digital design, supply and erection of Flex sheet boards with back support of frame work made with 25mm x 25mm MS square pipe (light weight) to erect at the specified places as directed by the department. The cost is including all materials, Labour for printing, erection at specified place including cost and conveyance all materials, Labour charges etc., complete as directed by the department.

Hire charges for supply, erection and removal of digital design flex boards with frame work made with of 25mm x 25mm MS square pipe (light weight)with required back support to erect boards at specified places as directed by the department. The cost inclusive of materials, labour for printing, erection and removal square pipe (light weight) after completion of the function.

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work. -do- Ordinary soil-Manual means up to 3m depth

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm ( 0.54 cu.m), 20mm (0.27 cu.m) and 12 mm (0.09 cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete.

Cement Concrete (1:2.5:5) -Grade M15 using 20 mm ( 0.54 cu.m) and 12 mm (0.36cu.m) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cms thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Cement Concrete (1:3:6) using 20mm (0.54 cum) and 12mm (0.36 cum) nominal size Hard Broken Granite crushed metal from any source conforming to relevents ISI standards for foundations etc., laid in layers of not more than 15cm thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Construction of Brick Masonry in CM(1:6) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of 110 mm thick Brick partition walls in CM(1:4)using well burnt bricks 2nd class or ground moulded (Non modular or traditional size) bricks (230X110X70 mm) including curing, cost and conveyance of all materials etc,. complete

Plastering in Cement mortar in CM (1:3)12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Plastering in Cement mortar in CM (1:5)12 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Plastering in Cement mortar in CM (1:5) 20 mm thick using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete

Flooring with Double charged (with double layer pigment) / multi charged stain free full body (with homogeneous full body pigment for entire body thickness) porcelain vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over base coat of cement mortar (1:6) 20 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kg per sq.m & joints with spacer joints with 3 mm wide jointed neatly with filer material of cement/epoxy grout/white cement paste to full depth mixed with pigment of matching shade as directed during execution, including cost and conveyance of all materials, etc., complete - for finished item of work. (Note: Unless otherwise laying of flooring is finished, no pre-payment shall be made for the tiles against supply)

Supply and fixing of 30 mm thick Flush door shutters, solid bond wood block board type with commercial ply on both faces conforming to IS:2202 of standard make solid core flush doors , with Commercial facing both sides with hot pressed bonded with liquid phenol formaldehyde with rebate cutting, including cost of screws etc., complete ( excluding cost of other fixtures which will be paid separately, but including labour charges for fixing the fixtures).

Supply and fixing of 1.5 to 2 mm thickness PVC sheet for toilet doors including screws, Nails and etc., complete as directed during execution.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls. -do- For old work

Providing and applying wall putty of white cement or polymer or cement based putty of approved make with average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs. sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work, excluding scaffolding charges - for internal and external walls. -do- For New work

Painting priming coat with ready mixed Cement primer (Water Thinnable) for new plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution. -do- Cement primer for interior grade-1 -new work

Painting priming coat with ready mixed Cement primer (Water Thinnable) for new plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution. -do-Cement primer for interior grade-1 -old work

Painting priming coat with ready mixed Cement primer (Water Thinnable) for new plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution. -do-cement primer for exterior grade - 2 for New work

Painting priming coat with ready mixed Cement primer (Water Thinnable) for new plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution. -do-cement primer for exterior grade -2 for old work

Painting with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls. -do- Single coat for External walls - old work

Painting with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls. -do - Single coat internal walls - old work

Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete. -do- single coat for old iron work & old plastered surface

Painting with Ready mixed Synthetic Enamel paint in all shades Grade-I having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete. -do- single coat for old wood work

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Flooring with cement concrete floor tiles of 25mm thick of following sizes set over base coat of cement mortar (1:6) 20mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sq.m & jointed with neat cement to full depth mixed with pigment of matching shade including cost & conveyance of all materials, etc., complete for finished item of work. '-do- Chequered cement concrete heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300 X 300 x 25mm of any shades.

Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered UPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 x 55 mm with reinforcement of 1 mm thickness and Mullion with overall size of 74 x 60 mm with reinforcement of 1 mm thickness. Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.0 mm.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Providing and fixing precast concrete blocks (interlocking pavers) using not less than M40 grade paver blocks and thickness not less than 80 mm for medium traffic areas conforming to IS 15658-2006 in all shapes and designs as per the specification, over sand bed of 20 mm to 40 mm (30 mm average) thickness and compacting with vibrating plate compactor having 3 tone compaction force there by forcing part of sand underneath to come up in between joints. final compaction of paver surface to be done after spreading and brushing the fine sand into joints to its final level. The work includes cost of all materials such as inter lock pavers, sand etc., Labour and equipment's such as cutting machine, lift, loading & unloading to work site clearing, bringing required for the successful completion of work as per drawings and Technical Specification Clause 1504 MORD and as directed during execution by the Engineer-in- charge of the work.

Note: i. Thickness of interlocking pavers and underlaying sand bed shall be as per the Table 1 of IRC SP:63-2004 based on the traffic and type of road. The data can be worked out accordingly. i.e. 1.Cycle tracks and pedestrain footpaths, 2. Residential streets, 3. Industrial streets, bus and truck parkings areas and 4. Arterial streets, etc. ii. The base and sub-base over which interlocking pavers are to be laid shall also be as per the Table 1 of IRC SP:63-2004 based on the traffic and type of road/ground surfaces.

Labour charges for laying & fixing of precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading & unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc

Supplying and fixing in position M.S tubes & pipes of all diameters as per ISI 1161 of approved size design including necessary labour charges for fabricating all heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost , including cost of fixing in position, cuttings,bending fabrication, welding, grinding and finishing smooth including painting the same with two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., including labour charges for fabrication of all steel works including cost of welding rods, power charges, etc and erecting in position and fixing complete in position as directed during execution

Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 4mm ACP (Aluminum composite panel )sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of ACP sheet, vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution .

Supply, laying, fixing and commissioning the following PVC/SWR pipes and fittings (As per ISI standards) - 6 Kg/Sq.cm (Type-B) - including couplers/ bends/ tees etc. any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc. with solvent jointing as per standard practice. -do- 110mm dia single socket PVC pipe

Supply, laying, fixing and commissioning the following PVC/SWR pipes and fittings (As per ISI standards) - 6 Kg/Sq.cm (Type-B) - including couplers/ bends/ tees etc. any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc. with solvent jointing as per standard practice. -do- 75mm dia Single Socket PVC pipe

Supply, laying, fixing and commissioning the following PVC/SWR pipes and fittings (As per ISI standards) - 6 Kg/Sq.cm (Type-B) - including couplers/ bends/ tees etc. any diameter including fixing necessary fittings like bends, plugs, couplers, junctions, tees, etc. with solvent jointing as per standard practice. -do- 160 mm dia double Socket PVC pipe

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Flowgurard SDR 11 and SDR 13.5 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) -do- 15.90mm OD Pipe - SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Flowgurard SDR 11 and SDR 13.5 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) -do- 22.20mm OD Pipe - SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Flowgurard SDR 11 and SDR 13.5 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) -do- 28.60mm OD Pipe - SDR 13.5

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Flowgurard SDR 11 and SDR 13.5 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) -do- 34.90mm OD Pipe - SDR 13.5

Supply & fixing towel rod (CP) of 24'' long and 3/4'' dia

Supply & fixing NP soap dish heavy type with NP Screws

Supply of 110 mm dia Door Bend 87.5 Degree of U.V. resistant UPVC SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Plain Bend 87.5 Degree U.V. resistant UPVC SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Single Tee of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Single Tee (With Door) of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Single Y of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm x 75 mm dia Reducer of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Coupler of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia 45 degree Bend of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 110 mm dia Vent cowl of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Door Bend 87.5 Degree of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Plain Bend 87.5 Degree of U.V. resistant UPVC /SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Single Tee of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Single Y of U.V. resistant UPVC SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Single Tee (With Door) of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Single Y(With Door) of U.V. resistant UPVC SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia Coupler of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 75 mm dia 45 degree Bend of U.V. resistant UPVC/ SWR pipe fitting (as per BIS standards).

Supply of 4" (101.6 mm ) Nahany Trap ( Without Jali with inlet) of U.V. resistant UPVC / SWR pipe fitting (as per BIS standards).

Supply of Iron clamp of '18' G for 75 mm dia pipe

Supply of Iron clamp of '18' G for 110 mm dia pipe

Supply of Round Jali