T-07/EDCP/2024-25

Amount

Carriage of following line material from Store centre-Pilibhit to site including measuring, weighing, loading, unloading at both ends and proper stacking at safe site under EDD- Pilibhit (Distance up to 30 Km.)

ST Pole 11 mtr. Long

33 KV Top channel

11 KV Top channel

Earthing rod

33 KV Disc insulator

11 KV Disc insulator

33 KV Pin insulator

11 KV Poly Pin Insulator

Stey set

Stey wire

3 Phase distribution box

ACSR weasel conductor

AB Cable 3x120 SQMM

AB Cable 3x95 SQMM

33 KV XLPE Cable of size (3x300) SQMM

33 KV Jointing Kit (3x300) O/D

11 KV XLPE Cable of size (3x120) SQMM

11 KV Jointing Kit (3x120) O/D

Erection of the following supports including cutting, making holes, fixing of all types of accessories digging of pits complete in all respect, as per RESSPO drawing.

Single ST Pole 11 mtr. Long.

33 and 11 KV double pole structure ST Pole 11 mtr. Long complete

Concreting of supports at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. Brick, ballast, sand etc would be provided by the contractor.

Earthing of ST Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15Mtr.above from the plinth of the support. All type nut & bolt would be given by the contractor.

Laying and sagging of 3 phase ACSR Weasel conductor from double pole at tapping point of 11 KV feeder line including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc in all respect.

Laying of LT ABC (3x95) SQMM complete work in all respect.

Laying of LT ABC (3x120) SQMM complete work in all respect.

Laying of 33 KV XLPE Cable of size (3x300) Sq.MM by drill method complete work in all respect.

Laying of 11 KV XLPE Cable of size (3x120) Sq.MM by drill method complete work in all respect.

Construction of 250 KVA T/Fs plinth for 250 KVA T/F of size 5 fit x5 fit x5 fit with the help of first class bricks, cement & coarse sand as per norms. Filling the structure completely by brick blast & plastering work of walls Including CC work on top in ratio 1:2:4 by cement, stone grit & sand and grouting of 2 nos. M.S. channel of size 50x50x5 mm on the top of T/Fs plinth whole work should be done as per RESSPO norms complete in all respect. (All Material will be provided by Contractor own his cost).

Mounting of 250 and 400 KVA T/F on newly constructed plinth, laying of cable jumpering and making all HT/LT connections complete work in all respect.

Fabrication and grouting of wire mesh fencing of 28 fit running length in rectangular shape height 2 meter with M.S. angle of size 50x50x06 mm. including gate at one side as per norms complete work and painting of same with 2 coats of red oxide and 2 coats of synthetic enamale paint. (All Material will be provided by Contractor own his cost).

Earthing of T/Fs by boaring type up to water level as per norms of UPPCL by providing GI pipe and making connection from boaring site to body and neutral of T/F. (All Material will be provided by Contractor on his own cost).

Fixing of 3 Phase distribution box on pole including proper clamping. All material would be provided by firm except distribution box.

Opening and Shifting of distribution transformer 25/63/100 KVA on D/P with jumpering and making all HT/LT connections complete work in all respect.

Hosting cable on pole by providing MS Pipe 6"x3 mtr long required clamped. complete work in all respect. For 33 KV XLPE cable 3x300

Hosting cable on pole by providing MS Pipe 4"x3 mtr long required clamped. complete work in all respect. For 11 KV XLPE cable 3x120

Termination of 33 KV Jointing kit

Termination of 11 KV Jointing kit

Providing and fixing of GI Pipe 4"

Providing and fixing of stay clamp with nut and bolt

Providing and fixing of holding clamp with nut and bolt

Providing and fixing of X-arm with nut and bolt

Providing and fixing of F bracket with nut and bolt

Providing and fixing of I Hook with suspension clamp

Providing and fixing of stay insulator

Providing and fixing of danger board with clamp

Providing and fixing of number plate with clamp

Providing and fixing of PG clamp

Providing and fixing of barbed wire

Providing and fixing of M.S. Angle brazing set with clamp

Providing and fixing of Stone Pad

Providing and fixing of LT Clamp with nut and bolt

Dismantling of exixting cable/conducting of line & its related all accessaries etc. and received back material carriage from work site to store centre, Pilibhit with loading & unloading and proper stacking. (Distance up to 30 Km.) Complete work in all respect.

M/S MEGHA ENTERPRISES

M A ELECTRICALS

M/S R.S. ENGINEERING TRADERS