Spl repair to bldg No T-36 ECHS Dental Clinic and T-20 at MH, Bldg No P-16 of 314 Fd Wksp Coy EME, Provn of cemented road from main gate to wksp floor at 314 fd wksp coy, Anarwala, Anti-static and anti-skid flooring in 03 x OT of BLdg No P-91 New MH

Amount

Taking down Chowkats with shutter of any description exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed.

S & F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and directed.

S & F 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.

S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 65 mm x 100 mm made from wood plastic composite (single extruded process) material with density 750 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F in repairs 18 to 20 mm thick solid WPC board for cupboard shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet including fixed to MS guiding runners with all fittings including suitable PVC frame as per specification and drawing complete all as specified and directed.

S&F in repairs 6 mm thick solid PVC board for cupboard /shelves with one side laminated & other side plain PVC sheet complete all as specified and directed.

Taking down door shutter of any description exc 1.0 but n. exc. 2 sqm each complete all as specified and directed.

M&L for 30 mm thick, factory made flush shutters,BWR solid core construction, with block board core and plywood face, pannels, commercial type on both sides including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F 100 mm size stainless steel butt hinges Gde-304 and fixed with stainless steel screws, complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long, solid in one piece stainless steel barrel tower bolts Gde-304 of extruded section 10mm dia shoot complete all as specified and directed by Engr-in-charge.

S&F 125 mm size solid in one piece stainless steel handles, 304 grade and fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F 150 mm size solid in one piece stainless steel handles, 304 grade and fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size solid in one piece stainless steel handles, 304 grade and fixed in stainless steel screws all as directed complete all as specified and directed by Engr-in-Charge.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F stainless steel sliding door bolts 204 grade, with bright bolt not less than 16mm dia with and incl a minimum of 6 bolts and nuts,and fixed 250mm long complete all as specified and directed.

S&F in repair floor door stopper of stainless steel double legged and tongue, 304 grade anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed.

S & F in repair 300 mm mild steel, ordinary rat tail rod pattern spring welded to steel/fixed to wooden door frame including roller and roller plate complete all as specified and directed.

M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness), size quality or description from wooden/steel frames glazed with putty or fixed with beads .complete all as specified and directed.

S&F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm each pane.complete all as specified and directed.

M&L Framed work as in door or gate with angle or other section prepared for handing and sliding with and including hooks and hinges and steel gate doors fittings Fe-410-W E-250 quality 'B' including dismantling of old frame complete all as specified and directed.

M&L mild steel plain black sheet 1.60 mm in wall cladding steel gates and similar work cut to size, holes, punched .including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joint including dismantling old sheet complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of old AC sheet complete all as specified and as directed.

Dismantling of timber scantlings 40 Sqcm and over in section in any position and in any situation. (unframed work) complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws including dismantling old AC sheet as specified and directed.

S & F mild steel work as in main and cross beam, hip and jack rafters, purlins etc. fixed with angle cleat or other connecting plate complete confirming to Fe – 410-O or Fe – 310-O all as specified and as directed.

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed.

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded including taking down old existing windowcomplete all as specified and directed.

S&F steel window with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded including taking down old existing window complete all as specified and directed.

S & F factory made steel ventilator with top hung shutters including hinges with steel handle, steel peg stay, tower bolt etc including taking down old ventilator complete all as specified and directed.

S&F steel ventilators, fixed type, with glazing bars including taking down old existing window/ vent complete all as specified and directed.

S&F in repair aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed with stainless steel screw complete all as specified and directed.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

S&F in repair 1mm wall thickness stainless steel 202 Gde drapery rod 20 mm dia with incl brackets, decorative finials at both ends, complete all as specified and directed. (Note : Sample/ design approved by Engineer-in-charge)

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down existing tubing complete all as specified and directed.

Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors incl taking up or down existing tubing complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg) for sub base to receive the screed including demolition complete all as specified and directed.

M & L PCC 1:4:8 100 mm thick type D-2 using 40mm graded stone aggregate as in sub base or leveling course of floor etc. including demolition of existing old cement concrete (un-reinforced) complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified.

M&L non skid ceramic coloured tiles (300x 300mm) x 7 to 8mm thick as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed.

M&L Glazed ceramic tiles coloured size of size 450 x 300 x 6 to 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match on and including 15 mm thick rendering in CM 1:4 for receiving tiles as in backing and over and including dismantling of old tiles complete all as specified and directed.

M&L non skid ceramic coloured tiles (square / rectangular) 7 to 8mm thick area of each tile exceeding 0.11 sqm but n.exc 0.18 sqmas in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on and over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed.

M & L for Vitrified Ceramic tiles light shade polished (square / rectangular) of 10mm thick, area of each tile n.exc exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile on over and including screed bed or bedding layers of mortar 15 mm thick for laying floor finishes in CM 1:6 and including dismantling of old tiles complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over and including 15 mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over and including 15 mm thick rendering in CM 1:4 , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed.

Demolition of stone slabs and tiles of any description and thickness as in floor, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) using old size bricks complete all as specified and directed.

M&L brick work with sub class ’B’ bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) using old size bricks complete all as specified and directed.

Taking down of cement or cement lime plaster any description from brick or stone wall , ceiling etc. including raking out of joints, hacking for key, scrubbing down with water etc.complete all as specified and directed.

M&L rendering 15 mm thick cement plaster in CM 1:6 on brick & concrete surfaces and finished even and smooth (without using extra cement) all as specified and directed. rendering will be done in two layers, 1st layer will be 10-12 mm thick and 2nd layer will be 3-5 mm thick complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound, finished fair faces of brick/concrete surfaces even and fair without using extra cement . (WPC will be measured and paid separately, rendering will be done in two layers complete all as specified and directed.

M&L 10 mm thick plaster in CM (1:4) on fair faces of concrete surfaces as in ceiling etc finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound Dr. Fixit/fosroc @ 200ml per bag of cement. complete all as specified and directed.

M&L for tow coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L, preparation of new plastered/un plastered surfaces and providing two coats of cement base paint as in walls over a coat of suitable primer complete all as specified and directed.

M&L for two coats of oil bound destemper over prepared putty surfaces of wall etc complete all as specified and directed.

M&L for preparation of wall and applying wall care putty interior grade 1 to 1.5 mm thick to make the surface smooth as specified and directed by Engr-in-Charge. Make : Berger/Asian/JK/Birla

M&L, preparation of old plastered/un plastered surfaces and providing two coats of cement base paint as in walls complete all as specified and directed.

M&L, preparation of old plastered/un plastered surfaces and providing two coats of OBD as in walls complete all as specified and directed.

M & L preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as speciied and directed.

S&F in repair GI steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading complete all as specified and as directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets. complete all as specified and directed.

S& F 4 mm thick 'E' board (Classic ) in false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E boad with ceiling section & perimeter of angle 25x25x0.50 mm thick all a specified, and directed ..

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole & dismantling of old iron/rcc work complete.

S&F powder coated aluminium anodised door with frame and shutter, and glazing 5.0 mm thick plain glass and 12 mm thick prelaminated particle board exerior grade in bottom panel, rubber gasket, aluminium glazing clips, mortice lock, aluminium stopper cleat, iron mongary including taking down complete all as specified and directed. section of aluminium door shall be of following sizes: - Top;- 85x44.5x1.20 mm thick fixed with rawal plug width;- 85x44.5x1.20 mm thick Bottom;- 100x44.5x1.20 mm thick Style;- 85x44.5x1.20 mm thick Glazing beading;- 0.70 mm thick Aluminium handle 'D' type ;- 150mm Aluminium tower bolt 9.9 mm dia shoot 200 mm long Aluminium sliding door bolt 250 mm long Aluminium door stopper aluminium hinges 100 mm long Note;- (i) Making good of wall surface with matching to existing surface included in quoted rate. (ii) PCC shall be measured and paid seperatelly

S&F in repairs powder coated aluminium anodised partition with frame, (fixed type) shutter, and glazing 4.8 mm thick plain glass, and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading of following sizes;- Frame of vertical/horizontal section;- 44.5x44.5x1.22 mm thick Bottuom section;-100x44.5x1.22 mm thick Complete all as specified and directed by the Engr in charge

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) complete all as specified.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified.

M&L for Hardcore broken stone / boulder of guage exc63mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified.

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded agg) in sub base of floor, rough finished complete all as specified and directed.

M&L sand filing under floors including watering and consolidation complete all as specifide and directed by Engr-in-charge.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

M&L pre polished coloured machine pressed precast concrete interlocking paver block any shape and size fixed with gray cement and pigment confirming to IS15658-2006 of 60mm thickness M-35 grade over compacted sand complete all as specified and directed. (Note : Sand filling shall be measured and paid separately under respective items of schedule)

M & L for Filleting in any position and to any shape in over sand filling cement mortar 1:4 including all mitres, stops, etc.complete all as spfd and directed.

M&L150 mm thick soiling (or sub base) with brocken boulders or quarries stone, inter itices filled surface formed and rolled and consolidated to required gradient and camber complete all as specified and directed.

M&L 75 mm thick (compacted thickness) WBM, with coarse aggregate sand stone, flint or quartzite (63 to 40mm size) of grading 2, spread and rolled with 8 to 10 ton power roller to required gradient, camber, level, super elevation complete all as specified and directed.

M& L for Cement concrete (1:1.5::3) type A1 (20mm graded stone agg) as in, hardstanding, floor etc finished even and fair including brooming on top surface of concrete including necessary formwork (thickness of concrete is not less 1000mm) complete all as specified and directed.

M&L Forming 12mm thick 250 mm deep Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

M&L for Forming construction joint 65 mm deep x 10 mm wide filled with sealing compound, Grade ‘A’ complete all as specified and directed.

Preaparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line of road marking of 150/100 mm width using 'HOT MARK' thermoplastic paint (Hot apllication) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of most specification including spraying of glass beads etc complete all as per manufacture instructions and as directed by Engr-in-Charge.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel consisting of super bright LED completed as per manufactures instructions etc.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Supply and laying 450 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

S & F of 2 mm thick conductive coloured flooring with self leveling, fixing by approved adhesive, cord welding, joint seal & copper strip 0.05 microns welding including earthing all as specified and directed.

M&L hard core of broken brick of gauge n.exc 63mm, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified and as directed.

M&L 75 mm thick PCC 1:2 :4 type B-2 using 40mm graded stone aggregate finished surface even and fair without using extra cement as in finish floor complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws as specified.

S&F 8 mm thick plates (plain or chequred channels, squares cut or notched (ordinary and counter sunk forming holes, without any attachment complete all as specified and directed.

M&L mild steel plain black sheet 1.60 mm in wall cladding steel gates and similar work cut to size, holes, punched .including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joint complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum in soft/loose soil, getting out, and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in mud stops,top of fencing foundation, rounded or chamfered on edges complete all as specified and directed.

S&F PVC (SWR) pipes 100 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

Taking down carefully existing aluminium/copper point wiring (light, fan,socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting,ceiling fan with regulator, sockets, wooden boards, laminated sheets from sunken boxes boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (Nominal area) PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including PVC casing and caping including accessories along with continuous earth wire 1.5 Sqmm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch.

One light/fan point controlled by one switch.

One 5 pin socket outlet 5 Amps controlled with one switch on the same board.

One 5 pin socket outlet 5 Amp controlled by one switch on independent board.

All as per item No 99 here-in-above but with 2.5 sqmm multistrand copper conductor cable for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire complete.

S&F Switch piano flush button single pole one way 5 Amp complete all as specified.

S&F Socket outlet, 5 Pin, 6 Amp 2 in 1, flush type, universal complete complete all as specified.

S&F Socket outlet 2 in 1, 5 pin, 5 and 15 Amp flush type complete complete all as specified.

S&F Switch piano flush button single pole one way 15 Amp complete complete all as specified.

S&F Ceiling rose 3 terminal/pvc/polycarbonate, isolated body complete all as specified.

S&F stepped type electronic fan regulator flush type AC, 230V complete all as specified and directed.

S&F angular Lamp holder including 9W/12W, PVC/polycarbonate type with back plate suitable for angular fittings complete complete all as specified.

S&F Ultra bright LED Tubelight fitting of 20 watt including reqd length of 1.5 Sqmm PVC multistranded copper conductor ro electrical connection from ceiling rose to connector of LED fitting including testing complete all as specified and directed.

Supply, fixing, connecting and testing of 35 watt LED building security light luminaries with min 10 KV surge protector die cast alluminium housing and incl bracket 32 mm GI pipe bend to shape incl clamp fastener, bolts, nuts & washers of min 1.2 Mtr incl grouting etc and 3 core 1 sqmm PVC insulated cable from ceiling rose to light fitting complete all as specified.

S & F False ceiling light 2x2 feet (600 x 600 x 70 mm) 28 Watt suitable for Armstrong/ Grid Ceiling complete all as specified.

M&L for Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s complete all as specified. Note:- DB and MCCB/MCB shall be of same make

S&F MCCB 63 Amps 3 pole 415 volts thermal magnetic release ICU=100% ICS having breaking capacity 16 KA including connection to terminal strip, complete all as specified & directed

S&F sheet metal enclosure MCB DB, double door , 08 way SPN, 240 volts with 200 Amps rated bus bar with blanking plates wherever required and I.P. 20 degree protection complete all as specified.

S&F Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20 Amp 240 volts with 'C' curve complete all as specified.

S&F MCB single pole and neutral 240 volts, 25 to 40 Amps B Curve complete all as specified.

S&F MCB single pole 240 volts, 6 to 32 Amps B Curve complete all as specified.

M&L in replacement for sub main wiring with 2 runx 6 Sqmm + 6 sqmm earth wire single core PVC insulated cable unseathed multistranded copper conductor LT 1100 volts grade FRLS cable IS-694 (ISI marked with valid CML No ) drawn in & icluding PVC conduit of dia not less than 25mm in concealed (ISI marked with valide CML No ) including its all fittings/accessoreis with one run single core copper cable 4 sqmm multistranded conductor (ISI marked with valide CML No) colour code as a earth continuity and connecting upto DB with suitable lugs all as specifed and directed.

S&F Earthing complete with galvanised steel earthplate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connecting to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (0.5 metre beyond pit to main switch), PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work, complete all as specified.

M& L for taking down ceiling fan and cable, dismantling blades and removing fan and blades to store complete all as specified and directed

M&L hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan complete all specified.

Supplying, laying, testing and commissioning of XLPE cable insulated screened PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 25 Sqmm 4 Core, in replacement complete all as specified and directed.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in any type of soil for foundation, cable laying etc complete all as specified and directed.

Returning, filling in excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified.

M&L Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified.

M&L for well burnt Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified.

S&F steel tubing 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection, complete all as specified and directed.