Proposed Sub Centre At Godsamba Village Ta.Mandvi Di.Surat

PROPOSED SUB CENTER AT GODSAMBA VILLAGE,TA. MANDVI, DIST.SURAT

BILL OF QUANTITIES

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

1 Excavation for foundation upto 1.5 m depth including sorting out and stacking of 171.00 CMT. 122.93

useful materials and disposing off the excavated stuff upto 50 Meter lead. (A) Loose

or soft soil ( I ) 0 To 1.5 mt. Depth

2 Excavation for foundation upto 1.5 m to 3.0 m depth including sorting out and 144.50 CMT. 136.47

stacking of useful materials and disposing off the excavated stuff upto 50 Meter

lead. (A) Loose or soft soil ( II ) 1.5 To 3.0 MT Depth

3 Filling available excavated earth (Including rock in trenches plinth, sides of foundations 257.00 CMT. 136.91

etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by

ramming and watering)

4 Providing & filling in plinth with murrum or yellow soil or selected soil in layers of 20 20.50 CMT. 301.77

cm. Thickness. Incl. watering, ramming & consolidation etc. complete.

5 Filling in plinth with sand under floors including watering ramming, consolidating 10.50 CMT. 481.80

and dressing complete (A) Foundation and plinth

6 Providing and filling rubbles including hand packing and filling interstices with quarry 28.00 CMT. 1094.11

spalls behind abutments and between returns as directed.

7 Providing and laying cement concrete 1:2:4 (1-Cement : 2- coarse sand : 4- hand 27.50 CMT. 3923.85

Machine crushed stone aggregates 40 mmnominal size) and curing complete including

cost of formwork in (A) PCC

8 Providing and laying controlled cement concrete M.250 and curing complete inculding 42.00 CMT. 4494.50

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in foundation, footings base of column and mass concrete. (A) Footing

9 Providing and laying controlled cement concrete M.250 and curing complete inculding 5.00 CMT. 8226.45

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Types of Column D) Column, Pillers, posts and struts , upto Plinth

10 Providing and laying controlled cement concrete M.200 and curing complete inculding 6.00 CMT. 8191.10

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Types of Column D) Column, Pillers, posts and struts, upto Ground Floor

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

11 Providing and laying controlled cement concrete M.200 and curing complete inculding 6.00 CMT. 8232.05

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Types of Column D) Column, Pillers, posts and struts, upto First Floor

12 Providing and laying controlled cement concrete M.200 and curing complete inculding 4.00 CMT. 8308.36

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Types of Column D) Column, Pillers, posts and struts, upto Terrace Floor

13 Providing and laying controlled cement concrete M.250 and curing complete inculding 8.00 CMT. 6440.77

the cost of formwork but Excluding the cost of the cost of reinforcement for reinforced

concrete work in Beams. (E) Beam, upto Plinth

14 Providing and laying controlled cement concrete M.200 and curing complete inculding 6.50 CMT. 6406.43

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Types of Beams,(E) Beam, Ground Floor

15 Providing and laying controlled cement concrete M.200 and curing complete inculding 6.50 CMT. 6447.38

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Types of Beams,(E) Beam, First Floor

16 Providing and laying controlled cement concrete M.200 and curing complete inculding 2.50 CMT. 6488.34

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Types of Beams,(E) Beam, Terrace Floor

17 Providing and laying controlled cement concrete M.200 and curing complete inculding 8.50 CMT. 6351.89

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Types of Slab,All Thickness (C) Slab upto Plinth and Ground Floor

18 Providing and laying controlled cement concrete M.200 and curing complete inculding 7.50 CMT. 6392.84

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Types of Slab,All Thickness (C) Slab for First Floor

19 Providing and laying controlled cement concrete M.200 and curing complete inculding 1.50 CMT. 6433.80

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Types of Slab,All Thickness (C) Slab for Terrace Floor

20 Providing and laying controlled cement concrete M.200 and curing complete inculding 0.50 CMT. 6758.92

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in All Thickness in Walls PARDI Ground Floor

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

21 Providing and laying controlled cement concrete M.200 and curing complete inculding 2.00 CMT. 5951.93

the cost of formwork and Excluding reinforcement for reinforced concrete work in All

Types of Stair case upto Ground Floor

22 Providing and laying controlled cement concrete M.200 and curing complete inculding 2.00 CMT. 5992.88

the cost of formwork and Excluding reinforcement for reinforced concrete work in All

Types of Stair case upto First Floor

23 Providing and laying controlled cement concrete M.200 and curing complete inculding 1.50 CMT. 5949.91

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in Lintel upto Ground Floor

24 Providing and laying controlled cement concrete M.200 and curing complete inculding 1.50 CMT. 5990.86

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in Lintel upto First Floor

25 Providing and laying controlled cement concrete M.200 and curing complete inculding 0.50 CMT. 6031.82

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in Lintel upto terrace Floor

26 Providing and laying controlled cement concrete M.200 and curing complete inculding 2.00 CMT. 5738.82

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in Chajja. Upto Ground Floor

27 Providing and laying controlled cement concrete M.200 and curing complete inculding 2.00 CMT. 5779.77

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in Chajja. Upto First Floor

28 Providing and laying controlled cement concrete M.200 and curing complete inculding 0.50 CMT. 5820.73

the cost of formwork but Excluding the cost of reinforcement for reinforced concrete

work in Chajja. Upto Terrace Floor

29 Providing and fixing TMT bars Fe-500D steel reinforcement for R.C.C. work including 14966.00 Kg . 77.80

binding, bending and placing in position complete upto floor two level ,Ground Floor,

First Floor , Second Floor, Third Floor, Terrace Floor (all floor).

30 Applying general insecticide pest control treatment to floors, cupboards etc including 68.00 SMT. 91.62

labour material etc. complete. Using Heptachloride 20 EC. As Per 6113_pests

Consentration Weight 0.50 percent is recommended one litre chemical emulsion dillute

31 Brick work using common brunt clay building bricks having crushing strength not less 13.00 CMT. 4214.32

than 35 kg/sqcm. in foundation and plinth in cement mortar 1:6 (1 cement :6 fine sand)

etc.comp. (B) Conventional Ground floor upto Plinth

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

32 Brick work using common brunt clay building bricks having crushing strength not less 23.00 CMT. 4503.04

than 35 kg/sqcm. in superstructure above plinth level upto floor two level in cement

mortar 1:6 (1 cement :6 fine sand) etc.comp. (B) Conventional Ground Floor

33 Brick work using common brunt clay building bricks having crushing strength not less 22.00 CMT. 4545.16

than 35 kg/sqcm. in superstructure above plinth level upto floor two level in cement

mortar 1:6 (1 cement :6 fine sand) etc.comp. (B) Conventional First Floor

34 Brick work using common brunt clay building bricks having crushing strength not less 13.50 CMT. 4587.27

than 35 kg/sqcm. in superstructure above plinth level upto floor two level in cement

mortar 1:6 (1 cement :6 fine sand) etc.comp. (B) Conventional Terrace Floor

35 Half brick masonry in common brunt clay building bricks having crushing strength not 19.00 SMT. 685.65

less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in (B)

Conventional Ground Floor

36 Half brick masonry in common brunt clay building bricks having crushing strength not 29.50 SMT. 741.48

less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in (B)

Conventional First Floor

37 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or 186.00 SMT. 161.19

Full/half brick walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Ground Floor

38 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or 195.50 SMT. 185.75

Full/half brick walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) First Floor

39 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or 60.50 SMT. 210.32

Full/half brick walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Terrace Floor

40 Providing & laying10 mm. thick cement plaster in single coat on fair side of ceilings 54.00 SMT. 148.31

for interior plastering upto floor two level and finishing with smooth mala plaster.(i)

Cement mortar 1:4 (1 cement : 4 sand) Ground Floor

41 Providing & laying10 mm. thick cement plaster in single coat on fair side of ceilings 54.00 SMT. 171.24

for interior plastering upto floor two level and finishing with smooth mala plaster.(i)

Cement mortar 1:4 (1 cement : 4 sand) First Floor

42 Providing & laying10 mm. thick cement plaster in single coat on fair side of ceilings 9.00 SMT. 194.17

for interior plastering upto floor two level and finishing with smooth mala plaster.(i)

Cement mortar 1:4 (1 cement : 4 sand) Terrace Floor

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

43 20mm thick sand faced cement plaster on walls upto height 10 metres above ground 241.00 SMT. 315.68

level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Upto Ground Floor

44 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 60.00 RMT. 44.27

45 Providing and laying polished Granite Slab 18mm thick in Flooring laid 20mm thick 18.00 SMT. 2377.54

Cement Mortar 1:4 (1-Cement : 4-Coarse Sand) and jointed with Grey Cement Slurry

including full molded round front edges , rubbing and polishing etc. complete.

46 Providing and laying polished Granite Slab 18mm thick in Risers of steps Dedo, 56.50 SMT. 2408.85

window sill, jembs and pillars laid 10 mm thick Cement Mortar 1:4 (1-Cement : 4-

Coarse Sand) and jointed with Grey Cement Slurry including full molded round edges

47 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of 94.50 SMT. 1120.36

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse

sand ) finishing with flush pointing in white cement.Soluble Salt PVT. Tiles in All

48 Providing and laying Vitrified tiles 8 mm thick , 24'' x 24'' in skrting risers of steps and 76.50 SMT. 1195.02

dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with

white cement slurry Soluble Salt PVT. Tiles in All Rooms.

49 Providing and fixing 37 mm thick flush door both sides laminated andshutter fabricated 16.50 SMT. 3767.30

from 35 mm thick solid core malemine faced three layered pre laminated flat pressed

wood based exterior grade bonded BWP/BWR synthetic resin having stamped IS

50 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter having 8.50 SMT. 2615.04

extra reinforcement on sides & edges in polish finish. The core of the shutter & frame is

to be filed up with injected polyurethene foam done in situ alongwith embedded wooden

pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with necessary screws & alluminium S.S fixtures &

fastenings & fastener sleeve.

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

51 Providing and fixing window having extruded aluminum Colour anodized section frame 14.04 SMT. 1583.95

main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track

member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size

92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with two sliding shutters of horizontal

member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size

40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/ with one mosquito net with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details etc

52 Providing and fixing standared extruded of alluminium section of size 63mm x 3.00 SMT. 1175.55

38.10mm x 1.2mm (Wt. 0.643 Kg/mt) with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc complete for Ventilation

53 Providing and fixing M.S. grill of required pattern of windows etc. with M.S.. flats at 340.00 Kg. 117.16

required spacing and frame alround square or round headed bolts and nuts or by

screws.including applying a priming coat of red lead paint and two coats of oil painting

54 Applying two coats of Birla (white cement based) or (acrylic lapy- putty) or equivalent 442.00 SMT. 130.64

& two coats of primer of approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth. with Wall painting (three coats) with

plastic emulsion paint of approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

55 Applying two coats of Birla (white cement based) or (acrylic lapy- putty) or equivalent 117.00 SMT. 173.19

& two coats of primer of approved brand and manufacture on new Ceiling surface to

give an even shade including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth. Ceiling painting (three coats) with

plastic emulsion paint of approved brand and manufacture on undecorated Ceiling

surface to give an even shade including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth.

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

56 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to 240.95 SMT. 166.65

give an required shape even shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc complete. Priming: Apply a liberal

coat of exterior acrylic primer and allow it to dry for 4-5 hours. Application of putty is

not recommended. Minimum 4-6 hours duration is required between each coat of

weather shield max paint

57 Applying priming coat over new steel and other metel surface after and including 6.50 SMT. 128.62

preparing the surface by throughly cleaning, oil,grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand paper with ready mixed priming

paint brushing red lead. and Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including cleanicn the surface of all dirt,

dust and other foreign matter.

58 Steel work welded in built up sections, framed work including cutting, hoisting, fixing 0.50 Quintal 9108.48

in position and applying a priming coat of red lead paint :-

(A) In beams and joints channels angles, column, tees, flats with connecting plates or

angle cleats as in

59 Providing and laying integral cement based water proofing treatment including 54.00 SMT. 880.72

preparation of surface as required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement u,brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added with special water proofing

compound confirming to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is carried along

60 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 54.00 SMT. 779.69

20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto surface using

61 Providing and fixing Stainless Steel railing having 50 mm dia hollow stainless steel pipe 37.50 RMT. 3101.71

as hand rail and 32 mm dia hollow stainless steel pipe with combination of 10 cm long

16mm dia pipe as per virtical supports 20 mm dia hollow stainless steel pipes H

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

62 Providing and fixing Teak Wood Frame 50 x 75 x 35 mm with 19mm thick ply shuttur 5.00 SMT. 8083.03

with both sides laminated and shutter fabricated from 19 mm thick including three coats

of lacquer polishing to exposed wooden surfaces and Stainless steel decorative ty

63 Providing and constructing sandwitch type Granite stone top & bottom Kota Stone 3.53 RMT. 3589.54

platform 0.6 mt. wide & 0.75 mt. height, including front granite stone patti of 10 cm

wide, vertical partitions of Kota stone with cement Mortar(1:1) as required comp as per

64 Providing and fixing kitchen platform trolley having three drawers of SS (IS 304) of 3.53 SMT. 19250.60

required size like thali, katleri, perforated, partition, cupsosar type in kitchen platform

having drawer front side and backside by using 19mm thick all proof plywood of ( IS

710 ) quality all side laminated etc. as directed. The size of SS (IS 304) basket of size 4"

to 18" for thali, dish, katleri, perforated, partition, cupsosar type as directed including

necessary S.S. fittings, handles, nobs, telescopic channels, etc. as directed

65 Providing and fixing in position 300mm high,150mm wide English/Gujarati Letters 2.00 SMT. 707.00

made from 1.0mm thick stainless steel sheet as directed by engineer in charge. With all

tools & plants etc. comp.

66 Providing and fixing wash down water closet (European type, W.C. Pan) with integral P 4.00 No 4327.52

or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-

fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China

Pattern :(i) in white colour, Providing and fixing 12.5 Litres low level flushing cistern

with a pair, of C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P brass handle

unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm

dia.porcelain enamelled flush bend including cutting holes in walls and making good the

same connecting the flush bend with cistern and closet (overflow pipe to be measured

and paid for separately)(A) Vitreous China (I) In white colour, Providing and fixing

plastic seat and cover for wash down water closer with C.P. brass hinges and rubber

buffers. (B) Black plastic seal and cover, With Jet spray heavy duty with S.S. Braided

hose 60 cm long.

67 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets 4.00 No 2461.70

painted white including sutting holes and making good the Providing and fixing C.P.

brass waste for washbasin or sink. (A) 32mmdia.,Providing and fixing pillar tap,

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

68 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with 6.00 No 599.63

jali of the following nominal diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making good the walls.

69 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib 8.00 No 186.82

tap polished bright. (i) 15mm dia.

70 Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow with Overhead 3.00 No 1151.87

Shower arm 200 mm with wall flange complete (i) 15mm dia.,Providing and fixing brass

screw down stop tap.(A) 15mm dia. (900 + 240.47 = 1140.47)

71 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including 1.00 No 3204.92

cutting holes in walls and making good the same (C) S.S. & Sink.(i) 600mm x 450mm

x 150mm size with Providing and fixing C.P. brass waste for washbasin or sink. (A)

72 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted 4.00 No 859.40

on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass

screws and washers.

73 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to 3.00 No 616.42

wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.

74 Providing and fixing 600mm x 120mm glass shelf with C.P.brass bracket and guard rail 3.00 No 544.51

complete mixed to wooden plug with C.P. brass screws

75 Providing and fixing Gun metal check or non-return fullway wheel valve. 25mm. dia. 2.00 No 420.63

76 Providing and fixing Gun metal check or non-return fullway wheel valve. 40mm. dia. 2.00 No 663.42

77 Providing and fixing chromium plated brass half turn flush cock of approved quality 4.00 No 263.77

including fixing in pipe line etc. complete.(ii) 25mm dia.

78 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (A) 1.00 No 132.88

79 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) 45.00 RMT. 72.64

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

80 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) 46.00 RMT. 91.83

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

81 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) 10.00 RMT. 195.66

for cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

82 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) 57.00 RMT. 878.56

conforming to IS 13592-1992 with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system

pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of pipes and

joints and jointed with adhesive solvent cement including cost of all materials.

83 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water 2.00 No 1246.91

tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

84 Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 3.00 No. 2017.19

500mm x 450mm C.I. horizontal grating wih frame complete.

85 Constructing brick masonry chamber for underground C.I. Inspection chamber and 3.00 No 2932.92

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I.

cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover

with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

86 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non- 12.00 RMT. 257.18

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints including testing of joints complete. (B) 150 mm d

87 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non- 10.00 RMT. 359.84

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints including testing of joints complete.(C) 250 mm di

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

88 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non- 10.00 RMT. 678.02

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt

ends prepared for collar joints including testing of joints complete.(D) 300 mm di

89 Providing & fixing G.I. Rain water spout of 50 mm.dia & 30 cm length etc. 2.00 No. 101.90

90 Providing and fixing in position cowel went to pipes.(C) 100mm dia 2.00 No. 505.17

91 Providing erecting and fixing double coated PVC. (ISI) water tank of required 1000.00 Lit 3.94

capacity each with all necessary fittings and connection etc. complete on terrace.

92 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 37.00 Pt. 485.81

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell push

& accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured/ metallic/

white front plate modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ ceiling rose / H.D.Connector as directed. (f) with medium class

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

93 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of 7.00 Pt. 674.68

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/ Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete Cat. III

94 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket 8.00 Pt. 257.55

erected on PVC/ Metallic/ Wooden box, single mounting base frame covered with

textured / metallic/ white front plate modules erected on/ in wall/ ceiling with following

type accessories Cat. III

95 Providing following type of Modular Type Accessories mounted with PVC / 10.00 Nos 151.50

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (1)One No. SP 6 Amp. Cat.III

96 (2) One No 5 pin plug Cat.III 10.00 Nos 151.50

97 (3) Two Pin/RJ-11 Telephone Socket [A] For One Gang Cat.III 3.00 Nos 160.59

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

98 (8) Computer RJ-45 socket Cat.III 8.00 Nos 160.59

99 (9) 16 Amp. SP one way switch Cat.III 10.00 Nos 180.79

100 (10) 6/16Amp. Universal socket Cat.III 10.00 Nos 190.89

101 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size 165.00 Mtr. 24.24

complete to be erected on/in wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in

approved manner as directed (a)20 mm

102 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 360.00 Mtr. 82.82

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (A) With medium

class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

103 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 270.00 Mtr. 112.11

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm

106 providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, 12.00 Mtr. 56.56

annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC -

227 erected in existing pipe of following size (Specifically for control panel, relays,

power switchgears, motor starters & control wiring) with required size of copper lugs,

nuts and bolts if required. (e) One wire 6.00 sq. mm

107 (f) One wire 10.00 sq. mm 21.00 Mtr. 91.91

108 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI 12.00 Mtr. 46.46

marked copper wires of following size to be erected as directed.(e) 1.50 Sq.mm 3 core

round PVC sheathed

109 Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE 45.00 Mtr. 20.20

insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT

erected in existing pipe. of following size of conductors & nos.of pairs. With necessary

connections. [A] Conductor Size 0.5 mm (a) Unarmoured (2) Two Pairs

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

110 Supplying & erecting approved make LAN cable of following size in existing pipe as 120.00 Mtr. 47.47

per direction [C] CAT -

111 Providing & erecting Switch board for Computer or electric apparatus consisting of 8.00 Nos. 1133.22

following modular type accessories mounted with PVC/ Metallic concealed/ open box

with single mounting base frame covered with textured/ metallic/ white front

plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

112 Decorative call bell Ting-tong box type 250 volts complete erected 2.00 Nos. 71.71

113 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 15.00 Nos. 373.70

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/ CRCA/ aluminium die cast powder coated and high

U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%, CCT 3000 K to 6500K, Luminaire

efficacy> 85 lumens/ watt, LED driver efficiency > 85 % (fitting required LM-79 & LM-

80 Certificates) (NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges

shown.) (A) Tube Light with integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat.III

114 Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, 9.00 Nos. 112.11

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps

integral type, with PC diffuser suitable LAMP holder (ii) 5 to 8 watts

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

115 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt 7.00 Nos. 758.51

assembled on single MCPCB, with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/ CRCA/ aluminium pressure die cast powder coated

and high U.V. & corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED driver efficiency >

85 % ( fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A) Square/ Circular shaped

Surface/Recessed Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (iv) 22-24 watts, Surge-2 KV Cat-III

116 Supplying and erecting LED street light / Flood light fittings with High power White 4.00 Nos. 3345.12

LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than

130 lm/w and corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name engraved or embossed

160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver

efficiency > 85 %. (fittings required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.) (A) Street Light

(IP-65), Surge protection -4KV integral and ,Light must have 440VAC line supply with

over-voltage protection. (i) above 36 to 48 watts Cat.III

117 Providing and erecting Approved make Four pole moulded case circuit breaker having 1.00 Nos. 6173.12

breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to

100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s.

with all internal connections, spreader tinned copper & complete erected in existing

G.M.S. housing. ICS=100% of ICU only Cat III

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

118 Supplying and erecting triple pole & neutral 440V /500V panel mounting Copper 0.40 Rmt 1961.42

Busbars with four equal Nos. of electrolyte bus having current density not more than

Amp. / sq.mm (Rated current /cross section area) duly wrapped with colour insulating

tape for phase sequence of following current carrying capacity, erected with necessary

bus bar supports /insulators, main cable socket to each bar, erected in existing cubical

panel with necessary connections. (A) Suitable for 100 Amp. Capacity

119 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and 4.00 Nos. 270.68

having breaking capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III

120 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to 20.00 Nos. 112.11

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

121 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C 4.00 Nos. 330.27

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

following capacity (B) 40 Amp. Cat.III

122 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) 3.00 Nos. 668.62

having 10KA breaking capacity & confirms to IS :8828 in existing box having following

capacity (b)40 Amp. Cat.III

123 (c)63 Amp. Cat.III 4.00 Nos. 737.30

124 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / 1.00 Nos. 1492.78

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable for (A) single phase

incoming and horizontal single phase outgoing (b) sheet steel double door (IP-43) (iv)12

125 (B) three phase incoming and single phase horizontal type outgoing Per phase isolation 1.00 Nos. 2339.16

type (PPI) (b) sheet steel double door (i)4 way

126 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having 4.00 Nos. 2235.13

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action & tripping

with all advance feature & do not incorporate any electronic component. for following

Max. rating erected as directed (ii) 40Amps. DP Cat. III

127 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 2.00 Kg. 794.87

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

128 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. 2.00 Nos. 368.65

galvanised iron pipe with coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

129 For using salt and charcoal / coke as required for pipe type earthing. 2.00 Nos. 171.70

130 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 1.00 Nos. 4591.46

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of

corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following type of

applications with chamber and heavy duty cover. (A)(approved make OEM has to

submit test certificate including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the value of earthing resistane

mentioned in test Certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. (a) For Electrical Installation up to

440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

131 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated 1.00 Smt. 10468.65

indoor type cubical panel board necessary IP-42 and above protection as per approval

from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body &

doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per requirements & instruction of engineer-in-

charge with erection of supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite

control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation

flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking

arrangement and rubber gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall be painted with

epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall

be measured excluding base beams) The panel shall be supplied with following

approved manufacturers with following size. (A) locally fabricated panel board (i) with

132 Providing, erecting, fabricating the M.S. structure as per requirement on site 10.00 Kg. 77.77

incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections

complete with cutting, welding, grinding & finishing duly painted with one coat of red

oxide with erection on site as per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

133 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand 30.00 Mtr. 284.82

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2

134 Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand / Solid 80.00 Mtr. 126.25

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (B) 4 core 6 Sq. mm

135 Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating 50.00 Mtr. 55.55

the fault all over the run and back filling the same and making the surface as normal

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

136 Providing & laying approved make Double walled corrugated pipes (DWC) of 50.00 Mtr. 62.62

polyethylene (conforming to IS 14930 II) with necessary connecting accessories of

same material at required depth in existing trench for laying of cable. below ground /

road surface for enclosing cable (A)50 mm outer dia

137 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC 8.00 Nos. 38.38

insulated armoured cable complete with out going tails, insulating tape etc for following

size of cables.(B) 2 to 4 core 6 Sq. mm

138 Providing and, fixing heavy duty flange type brass double compression type cable 2.00 Nos. 75.75

gland with rubber ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(B) 3 & 1/2 core 35/50 Sq. mm

139 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 32.00 Nos. 0.00 -

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/ cadmium plated nut bolts in an approved manner.(A) 1.5/ 2.5/4/6

141 Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark 7.00 Nos. 1596.81

with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy erected on

existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

142 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod 7.00 Mtr. 108.07

erected duly painted for fan complete with proper insulation without leakage and

143 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars 7.00 Nos. 108.07

up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty

PVC box complete erected concealed in Ceiling with necessary finishing.

144 Supplying & erecting single phase approved make industrial exhaust fan suitable for 4.00 Nos. 2054.34

medium duty ring mounted low noise operation suitable for medium duty having

following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM Cat.II

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

145 Supplying and erecting approved make Octagonal pole made from HR sheet steel. The 4.00 Nos. 6874.06

pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable termination to be erected

With Suitable foundation (Included) as per details given by manufacturer considering

site requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness

with 200mmX200mmX12mm base plate, 4-M16 Bolts and 600mm long with necessary

G.I. J Bolts .Approx Pole weight 46 kg

146 Supplying and erecting Street light pole bracket comprising main B Class GI pipe of 4.2 4.00 Nos. 491.87

cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of approx.

45cms.length and suitable for 76.5mm/80mm/require size of pole top having nuts and

bolts for fixing the brackets and having spread of 0.5 mtr. Length with 110 deg.with

vertical plane and suitable welded stiffener reducer and nipple with check nut complete

painted with one coat.of Red oxide / PU base primer and two coats of Aluminium / PU

paint. paint with following nos of arms.[A] Single Arm bracket 0.5 Mtr

147 Supplying & erecting IP 55 grade following size section pillar fabricated from joint less 1.00 Nos. 3595.60

M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be

buried in ground to have appropriate erection to work uniform until erected with cement

concrete foundation and 45 cm high bricks work finishing with plaster etc. hinged

double door internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos.

one is welded and other with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder coated paint. section pillar

roof should be without joint with water leakage proof & tested as per IP 55 test &

followed by IS 2147 of 1962 (B) 75 X 60 X 45 cm section pillar fabricated from

Gauge MS Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

148 Supplying & erecting approved make Digital time switch having lithium cell 6 years 1.00 Nos. 3168.37

operative and operate battery backup 1 channel day clock with 14 memory programme,

suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching

setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed.

149 Supplying & erecting power contactor ,AC3 duty for time switch complete erected as 1.00 Nos. 2782.55

per direction Cat III (D) 4 pole 440V 40 Amp.

150 Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 1.00 Nos. 1275.63

digits LED display, 0 to 750 AC Volts range erected on existing panel board with all

connection, wiring etc .with manufacturers calibration certificate.

151 Supplying and erecting approved make panel mounting type Digital Ammeter having 3 1.00 Nos. 1558.43

digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to

operate on 500 Volt AC, erected on existing panel board with all connection, wiring etc

.with manufacturers calibration certificate.

152 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 2.00 Nos. 317.14

500 V on existing panel board with necessary connections.

153 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 3.00 Nos. 274.72

15 VA burden erected in existing CRCA box duly secured with insulating materials

connected to the meter

154 Supplying and erecting approved make suitable panel indicator LED type lamp, lens 3.00 Nos. 43.43

cover, complete erected with necessary connections.

SCHEDULE B Page

Item No. Description of Item (With brif Specification And Reference to Book of Specifications) Quantity Unit Amount

155 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity 1.00 Nos. 8671.86

with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall

complete. [B] For 5.5 / 6.5 KG Capacity

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C

Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate mentioned in all the tender.

SCHEDULE B Page