REPAIR WORK/MAINT OF INTERNAL WATER SUPPLY, PLUMBING WORK, SANITARY FITTINGS, CLEANING OF WATER TANKS AND OTHER MISC WORKS AT GULMARG UNDER GE 969 EWS.

Amount

Cleaning of Over Head water storage tanks of capacity exc 250 ltr but up to 1000 ltr, mechanised dewatering of water including sludge from the tanks, cleaning internal & external tank surfaces with high pressure water spray/gunny bags and apply anti bacterial spray/ bleaching powder including writing date of cleaning (with thick paint in capital bold letter "TANK CLEANED ON") on each tankwith stencil etc complete all as specified and directed by Engineer - in - Charge. Note : Rates deemed to inclusive for (i) Opening & closing of tank covers properly before & after execution of cleaning work. (ii) Removal & refixing of float valves of any size & description before & after execution of work. (iii) Removal of sludge where directed by the Engineer-in-Charge. (iv) User completion certificate shall be produced by the contractor. (v) If damage the tank during the cleaning will re-fitting the new tank with contractor's own risk. (vi) If damage the float valve during the removal for re-fitting will re-fitting the same with contractor's own risk.

S&F in repairs PVC lid for 250 to 1000 Ltrs capacity PVC water storage tanks with hinging and locking arrangement etc Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

S&F in repairs 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed.

S&F in repairs 15 mm ball valves high pressure of Brass rod & high desity plastec ball screwed for brass pipe and fixed. (Minimum weight 280 gms) etc complete.

S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for brass pipe and fixed. (Minimum weight 450 gms) etc complete.

S&F in repairs 15 mm ball valves high pressure of Brass with epoxy coated rod & high density plastic ball screwed for brass pipe and fixed etc complete.

S&F in repairs 20 mm ball valves high pressure of Brass with epoxy coated rod aluminium rod & high density plastic ball screwed for brass pipe and fixed etc complete.

S&F in replacement of 15mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe Complete all as specified and directed by Engineer-In-Charge.

S&F in replacement of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe all as specified.

S&F in repairs vitreous China wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets. Complete all as specified and directed by Engineer-In-Charge.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor. Complete all as specified and directed by Engineer-In-Charge.

S & F in repair vitreous ware wash down water closet (Pedestal), white including flush pipe and plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromoium plated amluminim hinging device etc. Complete all as specified and directed by Engineer-In-Charge.

S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make

S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality

S & F in repair 15 mm bore Angular stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed. Complete all as specified and directed by Engineer-In-Charge.

S&F in repair 15 mm dia bore Chromium plated fancy type Pillar tap screwed down high pressure with or without lettred Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete

S&F in repairs central hole basin mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15mm dia bore pipe. Complete all as specified and directed by Engineer-In-Charge.

S&F in repair 15 mm dia bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges.

S&F in repairs corner glass shelf assembly consisting of 5.5mm thick sheet glass with chromium plated bracket guard complete all as specified.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed.

S&F Fancy type CP towel ring complete all as specified

S&F in repair 15 mm dia bore chromium plated bib taps, screwed for iron pipe, or for brass ferrule Complete all as specified and directed by Engineer-In-Charge.

S&F 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms)

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc.

Refixing old 15mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc)

Refixing old 20mm bore GI tubing and connections in new or old position (wall, ceiling, floor etc)

S&F 20mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors.

S&F 25mm outer dia of 3- layer PPR Polypropylene random copolymer concealed pipes SDR 7.4 (PN-16) unstalised and antimicrobial fusion welded having thermal stability for hot or cold water supply including all PPR pain & brass threaded polypropylene random fittings fixed complete to wall, celings or in floors.

M&L for lagging on 15 mm internal dia pipe all round with 50 mm thick bonded mineral wool pre-formed 'SNAP ON' pipe section of density of 144 Kg/Sqcm confirm to IS 9842 including providing with chicken mesh wire netting 25 gauge 20 mm mesh and 0.01 mm aluminium foil etc Complete all as specified and directed by Engineer-In-Charge.

M&L for lagging on 20mm internal dia pipe all round with 50 mm thick bonded mineral wool pre-formed 'SNAP ON' pipe section of density of 144 Kg/Sqcm confirm to IS 9842 including providing with chicken mesh wire netting 25 gauge 20 mm mesh and 0.01 mm aluminium foil etc Complete all as specified and directed by Engineer-In-Charge.

M/S RASHID CONSTRUCTION