SPECIAL REPAIR TO BLDG NO. P-81 AT 24 CIVILIAN ACCOMODATION AT NHO UNDER GE CLEMENT TOWN DEHRADUN

Amount

M&L for cleaning of roof slab/AC sheet roof /CGI sheet/ steel sheet roofing / chajja including picking, sweeping clean and washing with water to remove dust and providing water proofing treatment as describe as under:- (a) Applying a coat of STAR PROOF -MB-602 with help of brushes on the cleaned RCC slab/chajja. (b) Laying a layer of fibre cloth on wet MB-602 coating and applying another coat of MB-602. (c) After drying of surface finally applying a coat of STAR -SP-600 manufactures instruction by SS PL STAR. (d) Fixing drying of surface finally applying a coat of ATAR PROOF SP-600(any colour) manufacture instruction by star coating. Note:- The work of above water proofing treatment shall be got executed as per manufacture instructions through expert team of manufactures or or authorised applicator of manufacturing. MS STAR, SSPL- UAE Make- APURVA INDIA, STP

M & L rendering 10 mm thick on fair faces of concrete roof/ fascia, fins surfaces etc. and the like in cement mortar 1:3 mixed with WPC, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid for seperately.

M&L for cleaning of old wall surfaces and applying a coat of STAR BASC-50 after coating a coat of STAR wall coat complete all as specified and directed.

M&L for framed work as in grills , grating etc with ends of bars shoulderd and reveted or forged into spike frameguard bars iron door etc conforming to Fe -410-0 or 310-0 complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of primer on new steel surface etc complete all as specified and directed.

S&F welded steel wire fabric weight n exc 4 Kg per square metre fixed complete to steel member complete all as specified and directed.

Demolition of ( reinforced) cement concrete (reinforcement cut as required to facilitate demolition) of any description in any position not otherwise specifically provided for and removing demolished materials to a distance exceeding 250 Mtr but n exc 500 Mtr complete all as specified and directed.

M&L RCC cast situ type B-1 , 1:2:4 (20 mm graded stone aggt) in slab supported walls, beam and columns in floors, roof, landings balconies, deck slab complete all as specified and directed.

S&F reinforcement of mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columms,hooking ends and binding with and including mild steel wire annealed not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Form work to soffits of suspended slab such as roof slab, floor slab landings and simillar work not exceeding 200 mm thick (horizontal and sloping) complete all as specified and directed.

M&L for brick work with subclass "B"bricks straight or curved on plan exc 6 M mean radius built in CM 1:4 all including demolition of brick work built in cment mortar complete all as specified and directed.

M & L 15mm thick rendering on brick work surfaces mixed with water proofing compound (liquid) as per manufacture instruction, finish the surface even and fair without using extra cement in CM 1:4 complete all as specified and directed. Note : The WPC shall be measured and paid separately. The Item shall be executed on 5 Storey high building.

M & L 15mm thick rendering on brick work surfaces mixed with water proofing compound (liquid) as per manufacture instruction, finish the surface even and fair without using extra cement in CM 1:4 including taking down cement plaster on bricks or concrete surface of any description including racking out joints hacking for key scrubbing dwon with water complete all as specified and directed. Note : The WPC shall be measured and paid separately. The Item shall be executed on 5 Storey high building.

M&L two coats of weather proof emulsion paint Apex in newly plastered surface over a coat of primer incl preparing the surface with 2mm thick wall putty complete all as specified and directed. Note : The Item shall be executed on 3 Storey high building.

M&L preperation of old painted plastered surfaces of any description including scraping, brushing, brooming down and repair surface applying two coat of exterior emulsion paint (Apex) any tint / shade over a coat of primer of asian paint or other equivelent as approved complete all as specified and directed. Note : The Item shall be executed on 3 Storey high building.

S & F in repair rotational moulded PVC water storage tank cylinderical, verticle with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20 mm dia, tank nipple for inlet and outlet & making connection for inlet and outlet complete all as specified & directed.

S&F in repairs PVC (SWR) pipe 110mm dia single socket in any length with rubber gasket cup washing ,jointed laying in trenches, wall or floor including dismantling complete all as specified and directed.

S&F in repair PVC (SWR) bends of 110mm dia one end fixed to pipes and another end fixed to pipes with solvant complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 20 mm graded crushed stone aggregate as in channel /drain including demolition of cement concrete as in ground floor and paving n exc 15Cm below or above ground floor complete all as specified and directed.

Extra for forming fair finishes drain or channels 30CM inner girth in cement concrete using extra cement including forms, moulds, mitred/Stopped ends etc complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for Non Skid ceramic coloured tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles of size 300x450x7 mm thick on walls set and jointed in neat cement slurry and pointed in white or colosured cement to match the shade of tile including 10mm thick rendering in CM 1:4 finish surface rough to recieve tile including Dismantling floor, hearth or wall tiling including bedding (but not backing) rubbish off the premises complete all as specified and directed.

M&L 16 to 18 mm thick granite stone slab in steps, jambs, pillars, jamb pillars, window-cills, cooking plateform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture og pigment to match with shade of granite thick complete all as specified and directed.

M & L for machine cut Kota stone slab 20-25 mm thick as in floor/ treads of steps laid over and including 15 mm thick screed in cement mortar (1:6), set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M & L for machine cut Kota stone slab 20-25 mm thick as in risers to steps, skiting/dado, pillars, window cills and the like, laid over and including 10 mm thick rendering in cement mortar (1:4), set & jointed with grey cement slurry and pointed in white cement mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete all as specified and directed.

M & L 15 mm thick rendering on brick work surfaces finish the surface even and fair without using extra cement in CM 1:6 including taking down of old plaster complete all as specified and directed.

M & L for 10 mm thick plaster in ceiling of CM (1:4) on brick walls finished even and smooth without using extra cement etc incl taking down cement plaster in brick work ceiling including racking ot joints hacking for key scrubbing down with water etc complete all as specified and directed.

M& L for Prepration of New plastered surface and applying three coat of white wash on Ceiling complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of 3 mm thick wall care putty on walls complete all as specified and directed.

M&L for preparation surface plastered or unplastered by washing down and scrapping old distempered surface and applying two coat of oil bound distemper over 3 mm thick wall putty on wall surfaces complete all as specified and directed.

M&L for preparation surface by brooming down or steel wire brushing , scraping down smoke shoot,moulds etc from old decorated of wall plaster and applying one coat of white wash on wall surface including salt, glue and blue etc. as required incl cleaning of glass panes, floor and plinth protection complete all as specified and directed .

All as per item No-32 above but one coat of white wash on ceiling complete all as specified and directed.

S&F in repair vitrous china wash basin half pedestal size 505x605x475 mm white dlat back size excluding tap but including bracket complete all as specified and directed. Jaquar cat part No-FNS-WHT-0606 or equivalent in parryware or cera approved make.

S&F bottle trap (with internal partition ) 32 mm dia size with 250 mm and 190 mm long wall connection pipe and wall flange make Jaquar cat part No-ALD-76L250 X 190 or equivalent in approved make.

S&F in repair vitreous china wash down water closet (padestal pattern) white (excluding flushing cisterns and flush pipe) complete all as specified and directed.

S & F in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F steel tubes medium grade in any size or length galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ,bore of pipe 15mm dia incl taking down and making hole in RCC slabs for vertical pipes and making good the same with cement concrete (1:2:4)etc complete.all as specified and directed.

All as per item No 38 above but 20mm bore complete all as specified and directed.

S&F in repair CP wall mixer 3 in one system with provision for both telephone shower and over head shower complete with 1:5 mm long bend pipe and wall flange complete of make parry ware or jaquar complete all as specified and directed.

S&F in repair central hole wash hand basin mixer w/o popup waste system with 450mm long coper pipes and brass nut complete of make parryware or jaguar complete all as specified and directed. MAKE-Jaquar, hindware, parryware

S&F in repairs 15 mm dia brass chromium plated pillar tap with fly nut capstan head screwed for 15 mm bore dia of pipe complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size with swivel joints, any size, including fixing to 15mm dia GI pipe or union complete all as specified and directed.

S&F C.P towel Ring 200mm dia complete all as specified and directed. Make-Jaquar

S&F brass CP sink mixer swan neck for mixing hot and cold water screwed down for iron pipe and fixed to 15mm dia GI tube complete all as specified and directed.

S&F health fauchet including fixing bracket complete all as specified and directed. Cat No. ALD-769 Cat No. ALD-769, Make : Jaquar

S&F long body bib cock 15mm bore with wall flange of complete all as specified and directed in repair Make-Jaquar

S & F in repair 15 mm dia CP stop valve fancy type with long shank and cup ( Concealed type ) complete all as specified and directed. Make-Jaquar

S&F Toilet paper holder stainless steel fixed to wall etc complete all as specified directed. Make-Jaquar

S&F soap dish, fancy type make ‘JAQUAR’. Cat part No 1131N complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nut of length 450 mm complete all as specified and directed.

S&F 100 mm bore Cast Iron ‘P’ or ‘S’ trap complete all as specified and directed.

S&F 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

S&F in rapair 10 Ltrs capacity PVC low level flushing cistern with inlet foat valve,handle ,including brackets,PVC bend of approved make complete all as specified and directed.

S&F kitchen sink with drainage board made out of stainless steel 1 mm thick with plugs , washer ,wastes overall size 495mm x 420 mm and bowl size 410mm x 330mm x 160mm fixed in repair etc complete all as specified and directed.

Dismantling of Cast iron drain pipe 75mm dia from floors /walls etc and taking out of trenches/floors complete all as speciffied and directed.

All as per item No 58 above but bore of pipe 100mm dia complete all as specified and directed.

S&f 75 mm bore cast iron soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and directed.

All as per item No 60 above but bore of pipe 100mm dia complete all as specified and directed.

S&F in repair cast iron bends(any radius )measured bore of pipe in 75mm fitted with oval acceess doors complete all as specified and directed.

All as per item 62 above but 100mm bore pipe complete all as specified and directed.

S&F in repairs PVC (SWR)pipe 110mm dia single socket in any length with rubber gasket cup washing ,jointed fixed to wall including dismantling complete all as specified and directed.

S&F in repair PVC (SWR)bends of 110mm dia one end fixed to pipes and another end fixed to walls/parapet with CM(1:4) or PCC 1:2:4 if required including dismentling complete all as specified and directed.

Supply only 32mm dia waste pipe of polythelene,flexible, for wash hand basin or urinals complete all as specified and directed.

S&F in repair 100mm dia CP greating fixed with coloured cement joint to match the existing surface of tile complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames of any size n.exc 1.5 sqm each complete all as specified and directed.

All as per item 68 above but exc 1.5 and n.exc 4 Sqm –each complete all as specified and directed.

Taking down shutter of any thickness area 1 Sqm and n exc. 2 Sqm each complete all as specified and directed

S & F solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with the prelam sheet reinforced with MS square tube supply & fixing in opening incl necessary fixing arrangements as per specification & drawing complete all as specified and directed.

S&F 105X60 MM Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 105X60 MM Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stylel)consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat molded plain colour PVC "C" channel having a VC sheet strip of 20mm width stuck inside with solvlent cement for stiles and plain colour,PVC sheet for top rail,lock rail & bottom rail ,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stlyles and rail with suitable PVC sheet beading and joined together with solvlent cement and fixing in the frame of site as per specification and drawing given in page No 146 of SSR Pt-II (2004)(make Raj shree or equivalent ) complete all as specified and directed.

M & L 35 mm thick 2nd class hard wood factory made lazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(a) complete all as specified and directed.

M&L 35 mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and directed.

M&L PCC 1:2:4 type B-O (using 12.5mm graded crushed stone agg) as in channel benching/padding and similar work over roof surfaces or drain complete all as specified & directed.

S&F powder coated aluminium window shutter sliding type with 3 track (one shutterwith aluminium jallie.sliding type and two shutters with glass pan) without sash bar with stile and rail of size 45x45x1.8 mm thick including 4mm glass andnecessary, galzing clip, rubber packing with and including following fittings complete all as specified and directed.(i) Aluminium handle 200mm - 02 Nos.(ii) Aluminium Tower bolt 200mm - 02 Nos.

S&F powder coated aluminium window partly louvered and partly fixed glazed including 4 mm thick frosted glass, stainless steel wire mess 0.50mm thick,glazing cleats, rubber packing complete all as specified & directed

S&F galvanized MS wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

S&F frosted glass pane and glazing with oil putty in Square n exc exc 0.5 Sqm in each pane 4 mm thick complete all as specified and directed.

S&F MS Butt Hinge 100mm long medium weight cold rolled complete all as specified and directed.

S & F Alu anodized barrel tower bolt 200mm long of extruded section and fixed complete all as specified and directed.

S & F Alu anodized sliding door bolt with hasp and staple (bolt type ) and fixing clips of sheets cast of extruded section and fixing bolts and sliding bolts of extruded section 300mm long complete all as specified and directed.

S &F Alu handle ‘D’ type anodized 150mm long

Dust/snake aluminium strip guard in doors as sample approved complete all as specified and directed.

S&F 19/20 mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice laminated and other side balancing white laminated fixed in repairs with screw to timber form work including Ist class hard wood beading all round complete all as specified and directed.

S&F 1.5mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker’s instructions

S&F prelaminated particle board 12 mm thick exterior grade prelaminated both side with decorative choice complete all as specified and directed.

S&F for continuous (piano) hinges 30mm wide MS bright finish complete all as specified and directed.

S&F 50mmdia,polished,hard wood knobs fixed with screws fancy type complete all as specified and directed.

S&F in repair Aluminium drapery rod power coated 30 mm inner thickness fancy type including curtain ring ,brakets and fixed to wall complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete as specified in TD

S&F powder coated m.s peg set of 450mm long with 6pegs fixed to wall with rawal plug etc complete all as specified & directed.

Dismantling and taking down carefully U/S copper / aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Dismantling and taking down carefully fans exahust fan and wall fans of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified and directed.

Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FR) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of CI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FR ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :- (a) One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .

All as per item No 97 above but using 1.5 sqmm copper wire and 1.5 Sqmm copper earth wire for One light controlled by two nos, two way switches 5/6 Amps

All as per item No 97 above but with 2.5 Sqmm PVC insulated cable and same size of earth wire for 15 Amps power point.

Supply and fixing switch piano flush type single pole, one-way 5/6 Amps, 240 Volts AC

Supply and fixing switch piano flush single pole, one-way 16 Amp, 240 Volts AC

Supply and fixing socket out let 5 pin 6 Amps flush type all as specified.

Supply and fixing socket out let 5/6pin 5 Amp and 15 Amp flush type (multi) suitable for 240 Volt AC complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x25mm dia having three terminals complete all as specified and directed.

S & F LED tubelight 20 watt with integrated driver, polycarbonate diffuser & aluminum housing complete all as specified and directed. Make: Havells Cat Part No ENDURALINEAARNEOBS20WLED830SPCWH/HPL Cat Part No HLPT51520CW/ C&S Cat Part No LTTB44f20WLEDP/W

S & F LED mirror light 10 watt 600 mm long with integrated driver, polycarbonate diffuser & aluminum housing complete all as specified and directed. Make: Havells Cat Part No LUMILINEPLUSBS10WLED865SPCSS/HPL Cat Part No HPLT51510CW /C&S Cat Part No LTTB2F10WLEDP/W

S & F LED lamp 9 watt complete all as specified and directed. Make: ipro/Havells/Crompton

Hanging/fixing only repaired ceiling fan/exhaust of any sweep and connecting up with and including 3 core flexible PVC copper cable of suitable size from fan to ceiling rose complete all as specified & directed.

S & F PVC fresh air exhaust fan 240 volts Ac 50 Hz 200 mm sweep including louvers and cutting as required size and shape complete all as specified and directed. Make: Bajaj/Havells/Crompton

S & F PVC fresh air exhaust fan 240 volts Ac 50 Hz 300 mm sweep including louvers and cutting as required size and shape complete all as specified and directed. Make: Bajaj/Havells/Crompton

Supply and fixing sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLS ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and directed.

S&F Bell multi Music Type , 240 Volts complete all as specified and directed.

S & F batten/angle holder insulated body wwith back plate suitable for batten fitting complete all as specified and directed.

S & F modular enclosure for geyser with two pole and earth plug socket complete with one, single pole MCB 20 Amps cap 240 Volts AC complete all as specified and directed.

M & L for Rigid non-metallic PVC conduit of 25 mm dia inclusive of boxes (junction/ terminal) of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.

S & F batten/angle holder insulated body wwith back plate suitable for batten fitting complete all as specified and directed.

M&L for earthing complete with galvanished steel earth plate electrode 600x600x6.0 mm thick buried directly in ground and earth pit not less than 2.25 mtr deep below NGL and top edge of the plate not less than 1.5 Mtr deep below NGL, surrounded with adequate qty of char coal dust mixed with salt to a packed thickness not less than 15 Cm on all sides of earth plate incl excavation, earth work, returning filling in , removal of surplus soil to a distance in n.exc. 50 mtr incl GI wire 4mm dia nut bolts etc to earth plate one end connected to continuous earth wire incl GI pipe watering light grade with CI funnel and wire mesh and PCC 1:2:4 type B-1 as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1 duly re-enforced with MS bar 6mm dia @ 150mm C/C both ways with 10mm dia MS bar lifting handles, all as described in electric plate No. 5 of SSR part-I complete all as specified and directed.

Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar complete all as specified and directed.

Supply and fixing MCB 5 to 32 Amp 'C' series 10 KA repturing capacity complete all as specified and directed.

Supply and fixing MCB isolator SPN 40 Amp 240 V AC 10 KA repturing capacity complete all as specified and directed.

Saurav Enterprises

Bharat Construction Company

M/s Pradeep Kumar