UG cbale

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

KPTCL/SEE/TR(Op)/Cir-South/EE(O)/AEE-2/JE-1/25-26/EPR-22 Dated: 10.02.2026

Design, Manufacture, Testing and Supply of 11KV UG Cables of the size 1CX1000 Sq.mm to various 220/66/11kV & 66/11kV Sub-stations coming under Transmission (Operations) Circle-South, KPTCL Bangalore conforming to Technical Specifications. F.O.R.D at Store/ Site basis, including insurance, transportation and unloading.- 2910 Mtrs

Gauranteed Technical Particulars

Please fill only in the light blue coloured cells.

Sl.No Particulars UG Cable Size as specified in the tender (1C X 1000 Sq.mm)

a) Name of manufacturer

b) Place of manufacture

3 Applicable specn & standards voltage Grade

4 Suitable for effective Earth/Unearth system

5 Conductor screen insulation and insulation screen is manufactured by triple extrusion technique only.

6 Permissible voltage & frequency variation for satisfactory operation.

7 Continuous current for standard conditon as per IS:

a) In Air (45°C)

b) In Ground (30°C)

8 For site conditions:

a) In Air (45°C)

b) In Ground (30°C)

9 Derating factors for various laying conditions.

10 Derating factor for the resistance treatment

b) Shape of conductor

c) Nominal cross sectional area Sq.mm

d) Number of wire: (min)

e) Diameter of Wire: mm before compacting & strand Diameter size of conductor (mm)

12 Conductor Screening:

c) Nominal thickness (mm)

d) Continuous working temp.

e) Max allowable temp at termination of short circuit.

b) Thickness of Insulation (Nom) (mm)

c) Between Cores (mm)

d) Between Cores & Inner Sheath (mm)

e) Tolerance on thickness of insulation (Negative)

f) Diameter of core over insulaion

14 Specific insulation resistance at 90°C

15 Process of curing Dry

16 Whether XLPE Insulation filled or unfilled.

17 Insulation Screening:

b) Thickness (Nom) (mm)

c) Semi-conducting part (mm)

d) Metallic part: (Material) (mm)

e) Size of copper Tape

f) Whether over lapping provided

g) current carrying capacity

h) Continuously

I) For a short time of 1 Sec.

j) Diameter of cable over screening: mm

18 Whether insulation screen is removable without the application of heat:

19 Inner Sheath

c) Minimum thickness (mm)

d) Diameter of cable over inner sheath (mm)

b) Type of armouring

c) Diameter of wire (mm)

d) Whether Galvanised

e) Diameter of cable over armouring

f) Current carrying capacity of armour (In KA)

g) On continuous basis;

h) For a short time of 1 sec.

21 Outer Sheath:

b) Min. thickness of sheath: (mm)

c) Tolerance on thickness of sheath

d) Overall diameter of cable

22 FRLS Properties

a) Oxygen Index

b) Temperature Undex

c) Somke density Rating

d) Acid Gas Genereation

e) Flammability Test

23 Scheme for identification of cable

24 Short circuit withstand capacity

25 Short circuit current (KA)

26 Duration of short circuit (second)

27 Allowable/attainable maximum conductor temperature when carrying continuosly currents

28 Allowable/attainable maximum conductor initial temp. 90°C temperature when carrying continuously.

29 Cable constants

30 DC resistance per core (ohm/km) at 20°C

31 AC resistance per core (ohm/km) at operating temperature

32 Reactance Ohm/Km

33 Capicitance per core Ohm/Km

34 Insulation resistance at 27°C

35 Loss tangent

36 Dielectric constant

37 Maximum cable charging (A/km) current at normal operating volt

38 Factory tests (Enumerate in details for each type of cable)

39 Is the offered cable guaranteed to safely withstand continious conductor temperature of 90°C and also to safely withstand temperature upto 130°C for a duration of one hundred (100) hours per year.

40 Are the offered I/C cables guaranteed to perform satisfactorily under installation conditions specified. If yes, furnish relevant calculations in support including following data.

a)Induced voltage in the armour when Cable (500 m) carrying rated load V

Cable (500 m) carrying SC current V

b)Induced voltage and the circulating current in the copper tape when: Cable carrying rated load A Cable carrying SC Current A

c)maximum continuous and short time(1 sec) voltage withstand capability of inner pvc sheath of

d)Maximum continuous and short time(1sec)voltage withstand capability of outer most pvc sheath over the armour.

e)Maximum continuous and short(1 sec) current carrying capability of copper tape screen

41 Recommended minimum bending radius(mm)

42 Safe Pulling force(kg)

43 Cable Weight(kg/km)

44 Length of cable per drum(m)

45 Net weight(kg)

46 Drum weight(kg)

47 Transport weight(kg)

48 Can the insulation screen and the armour be connected together at both ends and grounded at both ends permanently. If not can the grounding be done at one end and the insulation screen only grounded at the other end and the cable inner and outermost sheaths withstand voltage under short circuit conditions at the open end.

Note:- Deviations if any from the specifications given here (Schedule-I), which provides for improvement in the functioning of the equipment will be accepted. Such deviations and their advantages shall be clearly brought out in Schedule-II of the tender.

Name of the Firm, Address & GSTIN Number

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE- II TECHNICAL DEVIATION

Design, Manufacture, Testing and Supply of 11KV UG Cables of the size 1CX1000 Sq.mm to various 220/66/11kV & 66/11kV Sub-stations coming under Transmission (Operations) Circle-South, KPTCL Bangalore conforming to Technical Specifications. F.O.R.D at Store/ Site basis, including insurance, transportation and unloading.- 2910 Mtrs

KPTCL/SEE/TR(Op)/Cir-South/EE(O)/AEE-2/JE-1/25-26/EPR-22 Dated: 10.02.2026

Please key in the Sl.No., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening.

For any further assistance for submitting your bids please call up KPTCL office. Please fill only in the blue coloured cells.

Please don’t insert your Bid values here or else your bid will not be considered for evaluation.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

TO, THE SUPERINTENDING ENGINEER (ELECTRICTICTY), TR(Op)Circle-South, KPTCL, A.R.Circle, BANGALORE-560009

The following are the Technical Deviations and Variations from and exceptions to the Specifications and documents Design, Manufacture, Testing and Supply of 11KV UG Cables of the size 1CX1000 Sq.mm to various 220/66/11kV & 66/11kV Sub-stations coming under Transmission (Operations) Circle-South, KPTCL Bangalore conforming to Technical Specifications. F.O.R.D at Store/ Site basis, including insurance, transportation and unloading. Specification No……….These deviations and variations are exhaustive.Except these deiviations and variations, the material shall be supplied as per specification and documents.

SlNO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Date Name of the Firm, Address & GSTIN Number

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE- III COMMERCIAL DEVIATION

ENQUIRY NO. KPTCL/CEE/T&P/EE(P)/AEE(P1)/400/400KV CB/13-14 KPTCL/SEE/TR(Op)/Cir-South/EE(O)/AEE-2/JE-1/25-26/EPR-22 Dated: 10.02.2026

Design, Manufacture, Testing and Supply of 11KV UG Cables of the size 1CX1000 Sq.mm to various 220/66/11kV & 66/11kV Sub-stations coming under Transmission (Operations) Circle-South, KPTCL Bangalore conforming to Technical Specifications. F.O.R.D at Store/ Site basis, including insurance, transportation and unloading.- 2910 Mtrs

Please fill Only in the Light Blue Couloured Box

Please key in the SlNo., Volume , Section , Clause , Desc as given in Booklet and finally your Statement of Deviation/Variations.

This Sheet would be opened at the Techno-Commercial Opening. Please refer Vendor Manual attached for further details.

For any further assistance for submitting your bids please call up KPTCL Office.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

If you are not deviating from any of the clauses mentioned please key in as 'NO DEVIATION' in the space provided.

TO, THE Superintending Engineer(Elec.,), TR(Op)Circle-South, KPTCL, A.R.Circle, BANGALORE-560009

I have read each of the Clauses mentioned in INVITATION FOR BIDS , INSTRUCTION TO BIDDERS , GENERAL CONDITIONS OF CONTRACT, SPECIAL CONDITIONS OF CONTRACT and COMMERCIAL TERMS AND CONDITIONS.

The following are the commercial Deviations and Variations from and exceptions to the Specifications and documents Design, Manufacturing, Testing, supply and Supervision of Installation & Commissioning of 79 nos. of 220KV Potential Transformers with marshalling boxes and without mounting structures.No……….These deviations and variations the matrix shall be suppliedas per your specifications and documents.

SlNO. SECTION CLAUSE NO. DESC. AS PER SPECIFICATION STATEMENT OF DEVIATIONS/ VARIATIONS

Note : Deviations specified elsewhere in the specification will not be considered.

Date Name of the Firm, Address & GSTIN Number

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

SCHEDULE- IV QUALIFYING REQUIREMENT DATA

ENQUIRY NO. KPTCL/CEE/T&P/EE(P)/AEE(P1)/400/400KV CB/13-14 KPTCL/SEE/TR(Op)/Cir-South/EE(O)/AEE-2/JE-1/25-26/EPR-22 Dated: 10.02.2026

Design, Manufacture, Testing and Supply of 11KV UG Cables of the size 1CX1000 Sq.mm to various 220/66/11kV & 66/11kV Sub-stations coming under Transmission (Operations) Circle-South, KPTCL Bangalore conforming to Technical Specifications. F.O.R.D at Store/ Site basis, including insurance, transportation and unloading.- 2910 Mtrs

SHEET FOR TECHNO-COMMERCIAL OPENING

Please don’t insert your Bid values here or else your bid will not be considered for evaluation.

We agree to provide all original Documents in support of the information provided for verification upon request. (Key in as YES in the space provided)

We understand that the electonic bid submitted by us is a valid offer in accordance with IT Act. (Key in as YES in the space provided)

We are fully aware of the electronic bid formalities and abide by the same. (Key in as YES in the space provided)

TO, THE SUPERINTENDING ENGINEER (ELECTRICTICTY), TR(Op)Circle-South, KPTCL, BANGALORE-560009

Bidders Name and address :

Following (mentioned below) is the list of earlier order for……………... Complete in all respects executed by us, details of which are being furnished by us in the support of qualifying requirements Design, Manufacture, Testing and Supply of 11KV UG Cables of the size 1CX1000 Sq.mm to various 220/66/11kV & 66/11kV Sub-stations coming under Transmission (Operations) Circle-South, KPTCL Bangalore conforming to Technical Specifications. F.O.R.D at Store/ Site basis, including insurance, transportation and unloading.

Capacity as in qualifying requirements.

Supplies done over the past 5 years.

Sl. No. Manufacturer Parameters of equipment desired as per qualifying requirements Qty. Purchaser P.O Ref and Date of Order Date of Supply Date of commissioning Remarks

Date Name of the Firm, Address & GSTIN Number

SCHEDULE V Bid Form

KPTCL/SEE/TR(Op)/Cir-South/EE(O)/AEE-2/JE-1/25-26/EPR-22 Dated: 10.02.2026

Design, Manufacture, Testing and Supply of 11KV UG Cables of the size 1CX1000 Sq.mm to various 220/66/11kV & 66/11kV Sub-stations coming under Transmission (Operations) Circle-South, KPTCL Bangalore conforming to Technical Specifications. F.O.R.D at Store/ Site basis, including insurance, transportation and unloading.- 2910 Mtrs

The Superintending Engineer Electy.,

TR(Op)Circle-South

KPTCL, A.R.Circle,

BANGALORE - 560 009.

Having examined the Bidding documents including Addenda Nos.

(Insert Number of sheets), the receipt of which is hereby duly acknowledged, we, the

undersigned, offer to supply and delivery

(description of goods and services in conformity with the said bidding documents and as

We undertake if our bid is accepted, to commence delivery within

(number) days and to complete delivery of all the items specified in the contract within

(numbers)days calculated from the date of receipt of your notification of Award

we agree to abide by this bid for a period of 180 days from the date fixed for bid opening under

clauses 17 of the instructions to bidders and it shall remain binding upon us and may be

accepted at any time before the expiration of that period.

until a formal contract is prepared and executed, this bid together with your written

acceptance thereof and you notification of award shall constitute a binding contract .

Date Name of the Firm, Address & GSTIN Number

SCHEDULE VI ASSESSEMENT OF FINANCIAL CAPABILITY OF THE BIDDER

KPTCL/SEE/TR(Op)/Cir-South/EE(O)/AEE-2/JE-1/25-26/EPR-22 Dated: 10.02.2026

Design, Manufacture, Testing and Supply of 11KV UG Cables of the size 1CX1000 Sq.mm to various 220/66/11kV & 66/11kV Sub-stations coming under Transmission (Operations) Circle-South, KPTCL Bangalore conforming to Technical Specifications. F.O.R.D at Store/ Site basis, including insurance, transportation and unloading.- 2910 Mtrs

1 Name of the Bidder

3 Details of Material/ Work to be executed

4 Quantity tendered

Sl.No. Particulars

1 Annual Turnover for the last three years Sl No. Year

2 Liquid Assets

3 Capital assets for the last three years

4 Current Ratio for the last year

5 Current Assets

6 Current Liabilities

7 Documents to be enclosed. 1 Audited Balance sheet for the last five years

2 Banker's /Financial Institutions endorsement for limit of Financial leading.

Date Name of the Firm, Address & GSTIN Number

Place Desgination

KARNATAKA POWER TRANSMISSION CORPORATION LIMITED

KPTCL/SEE/TR(Op)/Cir-South/EE(O)/AEE-2/JE-1/25-26/EPR-22 Dated: 10.02.2026

Design, Manufacture, Testing and Supply of 11KV UG Cables of the size 1CX1000 Sq.mm to various 220/66/11kV & 66/11kV Sub-stations coming under Transmission (Operations) Circle-South, KPTCL Bangalore conforming to Technical Specifications. F.O.R.D at Store/ Site basis, including insurance, transportation and unloading.- 2910 Mtrs

Sl. No. Terms & Conditions As per tender As per Bidder

1 Name of the Firm To be furnished by the bidder

2 Place of Manufacture To be furnished by the bidder

3 Scope of the proposal Whether bidder agrees for the complete scope of proposal as per clause 2.0 of ITB

4 Power of Attorney for signing the Documents To be furnished by the bidder

5 Bid Form To be furnished

6 Bid Security/EMD As per clause 4 of NIT

7 Bid Validity 180 days from the date of opening of Technical Bids (Excluding the date of opening of Technical Bids)

8 Manufacturer /Supplier Should be Manufacturer as per Clause-7.0, of IFB

9 Experience As per Clause-7of IFB.

10 Quantity Tendered / offered 1) 1C X 1000Sq.mm: 2910 Mtr

11 Prices The tenderer shall quote Firm Price only

12 Taxes & Levies as per tender condition

13 Payment Terms As per Clause 25 of ITB

14 Warranty/Guarantee 24 months from the date of commissioning or 36 months from the date of supply as per Clause-26 of ITB

15 Penalty for delay in supplies ½ % per week, subject to a maximum of 10% Clause 33 of ITB

16 Delivery/Completion Schedule As per Clause 24/28 of ITB

17 Termination of contract As per Clause 35 of ITB

18 Performance Security Clause 19.0 of ITB 5% of the value of order.

19 Guaranteed Technical Particulars To be furnished by the bidder as per Technical Specification

Date Name of the Firm, Address & GSTIN Number

Place Desgination