KLC Section 2 Renovation of

Amount

reception Counter in Neyyar block

15.39.3:Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 metres lead:Thickness above 25 mm upto 40 mm

15.57:Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

15.40.1:Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead:Thickness upto 40 mm

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

14.70:Melamine polishing on wood work ( one or more coat)

13.82.2:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

OD146738/2024-2025:Applying anti termite treatment using second generation chemicals (Anti termite PREMISE 350 SC IMIDACLOPRID) (34 holes chlorpyriphos 1% concentration required = 34x1=34.00 litres chlorpyriphos 20% E.C required 34.00/20=1.70 litres Chlorpyriphos 20% E.C/ Lindane 20% E.C 1.7 litres which is eco-friendly and nil harmful for human beings and pet animals which control the pests including all cost and labour charges etc. complete.

OD72990/2024-2025:Providing and fixing 12 mm thick frameless toughened glass including cost of material, convayance for labour charges etc comlete, as per the direction of the departmental officers.

OD73017/2024-2025:Supplying and fixing in position 19mm century club prime marine plywood premium quality fixing with nesessary angles, screws etc required and fixing 1.0mm thick premium mica over the plywood surface area inside and outside top and bottom fixing by pressing gum and nail etc including cost of all materials and labour charges conveyance etc complete as per the direction of Engineer in charge

OD145235/2024-2025:Supplying and fixing in position 12 mm century club prime marine plywood premium quality fixing with nesessary angles, screws etc required and fixing 1.0mm thick premium mica over the plywood surface area inside and outside top and bottom fixing by pressing gum and nail etc including cost of all materials and labour charges conveyance etc complete as per the direction of Engineer in charge

50.9.12.1:Providing and fixing Thomson Multi wood board or equivalent make, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately) as per the direction of site Engineer-in-charge.

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

21.17:Providing and fixing anodised aluminium grill ( anodised transparent or dyed to required shade according to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment ).

21.16.2:Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminium

21.13:Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete

OD82647/2024-2025:Providing and fixing stainless steel telescopic sliders of Sleek or equivalant for the cub board including material labour charges etc complete.

9.79.2:Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.50 mm

9.92.2:Providing and fixing chromium plated brass handles with necessary screws etc. complete:100 mm

OD145308/2024-2025:Providing and fixing stainless steel autocloser

OD82633/2024-2025:Machine polishing two coats to old marble floor using carborundum stone including labour charges etc complete .As per the direction of engineering in charge.

OD87443/2024-2025:Engaging coolie for cleaning and rearranging furniture

OD145258/2024-2025: Removing the waste cumulative materials from yard by 15km lorry conveyance

Bidder Name

ANIL D