Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.6 LAccepted-AOC | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹13.4 L+₹84,430 (6.70%)Rejected-Finance | L2 | Rejected-Finance REJECTED DUE TO L2 | |
| 3 | L3₹13.5 L+₹92,590 (7.35%)Rejected-Finance | L3 | Rejected-Finance REJECTED DUE TO L3 | |
| 4 | L4₹13.7 L+₹1.1 L (8.80%)Rejected-Finance | L4 | Rejected-Finance REJECTED DUE TO L4 | |
| 5 | L5₹15.4 L+₹2.8 L (22.4%)Rejected-Finance | L5 | Rejected-Finance REJECTED DUE TO L5 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
18 Aug 2020, 6:00 pmClosed
GE SHIKARGARH
Military Engineer Services, Garrison Engineer, Shikargarh, Near ASC Supply Depot, Ratanada Jodhpur-342011
REPAIR / REPLACEMENT OF INTERNAL ELECTRIFICATION IN JCOS/ORS MD ACCN AT BAHADURSINGH AND SUGAN ENCLAVE UNDER GE SHIKARGARH IN AA JODHPUR
2020_MES_365362_1
8649/E8 43
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
GE SHIKARGARH
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE SHIKARGARH
₹40,000
Yes
31 Aug 2020
30 Jul 2020
20 Aug 2020
30 Jul 2020
18 Aug 2020
6 Aug 2020
30 Jul 2020 - 5 Aug 2020
Amount
Taking down carefully existing unserviceable aluminum/copper point wiring of any description & in any position with and including taking out and removing existing wooden battens/conduits /casing caping fixed on surface and all fittings including unserviceable sunken/surface boxes & terminal/junction boxes of any description, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures for reuse at site or depositing to MES store and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed
M&L for point wiring for one light/fan/bell point controlled by one one way switch complete with multistrnaded copper conductor using 1.5 Sqmm (nominal sectional area) multi stranded copper conductor, single core, FRLS PVC insulated & sheathed cable, 1100 volts grade in existing PVC /Steel conduit and in existing sunken pressed steel terminal boxes in wall but including 3.00 mm thick plastic laminated sheet top cover fixed with brass screw and washer with all accessories including single core multi-stranded copper conductor 1.5 sqmm size cable as earth wire ( Green Colour) and connected to earth dolly drawn in same conduit complete . MAKE Of Cable-Finolex/Polycab/Havells
ditto but for One 3 Pin 5 Amps socket outlet on same board
ditto but for One 3 Pin 5 Amps socket outlet on independent board.
ditto but for One light point controlled by two,two way switches
All as per item No 2 above but using 4.0 Sqmm PVC insulated, unsheathed cable for one 3 Pin socket outlet 15 Amps on independent board.
Supply and fixing switch piano, flush type ,single pole one way 5/6 Amps 240 Volts, AC circuit complete all as specified and directed. Make : Anchor Penta / Cona /SSK
Supply and fixing switch piano, flush type ,single pole two way 5/6 Amps 240 Volts, AC circuit complete all as specified and directed. Make : Anchor Penta / Cona /SSK
Supply and fixing switch piano, flush type ,single pole one way 15/16 Amps 240 Volts, AC circuit complete all as specified and directed. Make : Anchor Penta / Cona /SSK
S/F Socket outlet 2 in 1, 3 pin, 5A universal flush shuttered type ISI mark complete all as specified and directed. Make : Anchor Penta / Cona /SSK
S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush shuttered type ISI mark complete all as specified and directed. Make : Anchor Penta / Cona /SSK
S&F Bell Switch 5 Amps flush type Single pole 240 volts ISI marked complete all as specified and directed. Make : Anchor Penta / Cona /SSK
S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete all as specified and directed. Make : Anchor Penta / Cona /SSK
Supply and fix door Bell Ding Dong type complete all as specified and directed. Make : Anchor Penta /Cona/SSK.
S&F fan regulator electronic, deluxe rotary step type, suitable for ceiling fans of any capacity, pre-wired 230 volts AC 50Hz supply 100Watt complete all as specified and directed. Make : Anchor Penta /Cona/SSK.
M&L for Sub main wiring with PVC insulated but unsheathed 2x6 sqmm multi stranded copper conductor cable passing through and incl PVC conduit on wall (by means of screw incl making good existing ) ISI marked and conduit accessries fixed on surface of wall, ceiling etc, making good the disturbed surface with and incl 1x6 sqmm single core copper conductor cable PVC insulated and unsheathed as earth wire (green colour) including taking down old one. Note:- Two run of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable incuding one run of PVC conduit will be measured as one length including making good the disturbed surfaces. Make of wire : Finolex/Havells/KEI/Polycab, Make of PVC conduit : Finolex/Precision/Polycab/Presto-Plast.
All as above item No 13 but using 2x4 Sqmm cable single core copper with 4 Sqmm copper conductor as earth lead. Make of wire : Finolex/Havells/KEI/Polycab. Make of PVC conduit : Finolex/Precision/Polycab/Presto-Plast.
All as above item No 13 but using 3x10 Sqmm cable single core copper with 1 x10 Sqmm copper conductor as earth lead. Make of wire : Finolex/Havells/KE/PolycabI, Make of PVC conduit : Finolex/Presision/Polycab/Presto_Plast.
S&F sheet metal enclosure SPN 240 Volts having 2 pin and earth plug and socket complete with one single pole MCB 20 Amps all as specified Make:Legrand cat No 5078 11 or equivalent ABB/Scheinder.
Fixing only LED light 22/20/18 watt including taking down old one all as specified and directed. Note : LED lights shall be issued under Sch 'B' free for fixing only
Fixing only LED light 10/12 watt including taking down old one all as specified and directed. Note : LED lights shall be issued under Sch 'B' free for fixing only
S&F 05 Watt LED Batten with extruded aluminium housing in 1 Feet Length with in Built LED strip, LED shall be having 400 system lumens, 3 stage CCCV driver with voltage range of 150-270 AC and DC output operating voltage of driver should be complied to SELV norms not exceeding 72 DC only including taking down old one complete all as specified and directed. Make :- CG / Wipro / Philips.
Taking down carefully UNSV main switch and DB's including MCBs of any size, make, type and capacity removing materials to store for keeping in safe custody for re-use at site/Sch of credit and making good disturbed surface of walls, floors, etc.all as directed.
S&F sheet metal enclosure triple pole and neutral 415 Volts 4 way (TPN) with 100 Amps rated coper busbar and MCB for double door having IP 43 protection flush mounting MCB shall be measured separately complete all as specified and directed Make: Legrand Cat No- 5076 70 or equivalent ABB/ Scheinder /L&T.
S&F Distribution boards 415 V ,8 way SPN with 100 Amps rated coper busbar and MCB for double door having IP 43 protection flush mounting MCB shall be measured separately complete all as specified and directed . Cat No- 507611 Make: Legrand or equivalent ABB/Scheinder/L&T.
S&F MCB SP 6 to 32 Amps 10 KA, 240 V, C curve complete all as specified and directed . Make: Legrand Cat No 4085 90 or equivalent ABB/Scheinder/L&T.
S&F MCB SPN 32 amps 10 KA, 240 V, C curve complete all as specified and directed . Make: Legrand Cat No 4086 17 or equivalent ABB/Scheinder/L&T.
S&F MCB TPN 63 amps 10 KA, 415 V,C curve complete all as specified and directed . Make: Legrand Cat No 4086 83 or equivalent ABB/Scheinder/L&T.
S & F of MCCB 3 Pole 100 Amps 25 KA All as directed by EIC. Make: Legrand or equivalent ABB/Scheinder/L&T.
S& F sheet metal enclosure triple pole and neutral 415 Volts 4 way (TPN) with 250 Amps rated coper busbar with MCCB 160 A, TPN 415 V as incommer with door cover having IP 43 protection flush mounting MCB shall be measured separately complete all as specified and directed . Make: Legrand Cat No- 5077 45or equivalent ABB/Schneider.
Earthing complete with GI steel earth plate eletrode 60 cm X 60 cm X 6.0 mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground,connected to Gl iron or steel earth wire 4 mm dia (8 SWG) by means of nuts,bolts checks nuts and washers made of Gl iron or steel earth wire protected by Gl iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC coverslab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges,necessary excavation and earth work in any type of soil complete all as shownin electrical plate No 3 of MES schedule part-I and testing after completion.
M/L for cutting of PCC/Kota stone floor/plinth /wall/road etc for insertion of GI pipe for protection of GI wire of earthing including making good disturbed surface.
Taking down existing unserviceable static meter and Fixing only AC single phase static energy meter all as specified and as directed by Engr-in-Charge. Note 1 :- Energy Meters shall be issued under Sch 'B' free for fixing only. Note 2 :- Unserviceable meter will be deposted to MES store yard.
Fixing only LED Street light 45/60/90 watt including taking down old one complete all as specified and directed by Engr in Charge. Note : LED lights shall be issued under Sch 'B' free for fixing only
S&F of GI pipe bracket 40 mm dia light grade pipe 1.5 mtr long bent to shape as directed including nut,bolts,washers and clamp etc and necessary 1.5 Sqmm 3 core sheathed copper PVC cable for connection including taking down old one complete all as specified and directed by Engr in Charge.
S&F Energy saving new generation 10 watt LED bulk head luminaries with Opal diffuser 230V, single phase, complete with all accessories and all electrical connections, complete all as specified and directed by Engr-in-charge. Make : Crompton or equivalent in Havells/ Phillips.
S&F slim Surface mounting Round LED panel al.die cast body with primim diffuser to ensure glare free & even distribution of light 6 watt LED in powder coated white finish with intragrated electronic driver 230V, single phase, complete with all accessories and all electrical connections, complete all as specified and directed by Engr-in-charge. Make : Havells or equivalent in Phillips/Crompton.
S&F decorative wall light fixture made up of polycorbonate suitable for 10 watt LED lamp (B22) complete with all accessories and all electrical connections, complete all as specified and directed by Engr-in-charge. Make : Havells or equivalent in Phillips/Crompton.
M/S VENUS BUILDER
Shri Ram Traders Co
Dwarka Enterprises
KARNI CONSTRUCTION COMPANY
vinayandsons
Siddharth Constructions
M/S JAGDAMBA ENTERPRISES
Shri Electrical Enterprises
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .