Construction of Compound Wall, Pickle Ball Courts and Other Development Works at Indoor Stadium F.P. no.35, Dabhoi, Dist. Vadodara under 15th Finance Commission Board Grant

Sr no Description Qty Unit Rate Amount

1 Boring holes 3.5m deep in ordinary soil (for cast in situ 28.00 Each 1523.30

piles) and getting out the soil and disposal of the surplus

excavated soil as directed within a lead of 50 metre for

following diameter of piles (iii) 300 mm

2 Extra for under reaming inside the bore Holes for under 28.00 Each 648.25

reamed piles of following Diameter. (iii) 300 mm

3 Excavation for foundation up to 1.5 M Depth including 19.70 Cumt 120.01

sorting out and stacking of useful materials and disposing

of the excavated stuff up to 50-meter lead (A) Loose or

4 Filling available excavated earth (excluding rock) in 10.84 Cumt 296.29

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering.

5 Filling in plinth with sand under floors including watering 93.96 Cum 471.69

ramming, consolidating and dressing complete.

6 Providing and laying cement concrete 1:3:6 (1-Cement: 3- 13.07 Cumt 3236.97

coarse sand: 6- Crushed stone aggregates 40 mm nominal

size) and curing complete excluding cost of formwork in

(A) Foundation and Plinth

7 Providing and laying controlled cement concrete M.200 8.93 Cumt 3942.22

and curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

8 Providing and laying controlled cement concrete M.200 8.87 Cumt 5809.41

and curing complete including the cost of formwork and

excluding the cost of reinforcement for reinforced concrete

work in (C) Beams up to floor two level.

9 Providing and laying controlled cement concrete M.200 5.92 Cumt 8713.56

and curing complete including the cost of formwork and

excluding the cost of reinforcement for reinforced concrete

work in (D) Columns, Pillars posts and struts up to floor

10 Providing and laying cement concrete 1:1.5:3 (1- Cement: 3.25 Cumt 4665.60

1.5- Coarse sand: 3- crushed stone aggregates 20 mm

nominal size) and curing complete including cost of

formwork but excluding reinforcement for reinforced

concrete work in (A) Wall Caps / Coping

11 Providing TMT Bar FE 500D reinforcement for R.C.C. work 1798.81 Kg 77.29

including bending, binding and placing in position

complete up to floor two level

12 Brick work using common burnt clay building brick having 48.70 Cumt 4121.55

crushing strength not less than 35 kg/sq. cm. in super

structure above plinth level up to floor two level in cement

mortar 1:6 (1 Cement: 6 fine sand) (B) Conventional

13 20 mm. thick sand faced cement plaster on wall up to 458.63 Sqmt 337.52

height 10 metres above ground level consisting of 12mm

thick backing coat of c.m. 1: 3 (1 cement : 3 sand) and

mm thick finishing coat of c.m. 1: 1 (1 ccement:1 sand) etc.

14 Extra over items on plastering for finishing with a floating 98.47 Sqmt 49.41

coat of neat cement slurry.

15 Applying two coats of putty & two coats of primer of 579.83 Sqmt 40.59

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth.

BOQ for Construction of Compound wall, Pickle Ball Courts and other development works at Indoor

Stadium, F.P. No-35, Dabhoi, Dist - Vadodara

Sr no Description Qty Unit Rate Amount

16 Finishing wall with weatherproof exterior emulsion paint on 579.83 Sqmt 117.40

wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials. Etc

17 Box cutting the road surface to proper slope and camber 193.50 Cumt 106.81

for making a base for road work including removing the

excavated stuff and depositing on the roadside slope as

directed upto 50Mt.lead.

18 Providing and laying Compacted WBM (Grade II) with BT 193.50 Cumt 1566.74

Crushed metal of size 40mm to 63mm) including using

20% stone Screening grit 0.16 cum and stone dust

cum as filler including for Spreading, watering &

consolidation by vibrator power road roller 8 tone to

tone etc complete as per MoRTH clause

19 Providing & Laying 37.5 mm thick B.M. with BT Aggregate 126.43 M.T. 2554.75

as per M.O.RT & H specification and (VG 30) asphalt

Grade 60/70 for tack coat 2.50kg/10 smt and mixing

34.00kg/MT i.e. 3.40% by weight of total mix including

heating the aggregate and asphalt in continuous batching

drum mis plant and spreading the same by paver finisher

& consolidation with vibratory roller including providing all

materials equipments, tools and plants, fire wood, oil,

kerosene, labour charges etc. complete using contractor

own machinery drum mix plant and paver finisher etc.

20 Providing and Laying 25mm thick S.D.B.C. with BT 79.18 M.T. 3152.79

Aggregate as per M.O.R.T and H. specification and (VG

30) asphalt Grade 60/70 mixing at 50 kg/MT i.e. 5.0% by

weight of total mix including heating the aggregate and

asphalt in continuous batching drum mix plant and

spreading the same by paver finisher and consolidation

with vibratory roller including providing all materials

equipments, tools and plants, fire wood, oil, kerosene,

labour charges etc. complete using contractor own

machinery drum mix plant and paver finisher etc. complete

21 Providing and laying asphalt painting on BT surface with 1290.00 Sqmt 32.99

bitumen VG-30 @ rate 5 kg per 10smt by mechanical

sprayer and spreading the stone dust on prepared surface

at the rate of 0.030Cmt/10Smt and rolling with smooth

wheeled and penuriatic roller and brushing etc. completed

22 Providing and Fixing 1.80- 4.00 mm thick FRP roofing 6.36 Sqmt 671.65

sheet fixed with galvanised iron J or L Hooks, Bolts and

nuts 8mm diameter with bitumen and G.I. limpet washer or

G.I. limpet washer. filled with white lead complete

excluding the cost of purlins, Rafters and Trusses.1.80 mm

thick FRP sheet as approved and directed by engineer in-

23 Providing and fixing pre-cast Rubber Dye / steel Dye inter 81.30 Sqmt 704.07

locking concrete block 60mm thick with grade of concrete

M300 pneumatic compressed / vibrated mechanically and

as per approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidelines of IRC

: SP 63-2018 etc. Complete.

24 Providing and fixing Stadium chair Tip Up chair of HDPE 94.00 Each 4178.45

blow Moulded Plastic material, Aluminium stand with silver

powder coated, Plastic material will be UV resisted,

including fitting with anchor fastener of size M8- 75 mm,

transportation, finished with silicon sealant at anchor

fastener etc. complete as directed and approved by

engineer in charge.

BOQ for Construction of Compound wall, Pickle Ball Courts and other development works at Indoor

Stadium, F.P. No-35, Dabhoi, Dist - Vadodara

Sr no Description Qty Unit Rate Amount

25 Grouting the joints of flooring tiles having joints of 5 mm 169.99 sqmt 312.14

width, using epoxy grout mix of 0.70 kg of organic coated

filler of desired shade (0.10 kg of hardener and 0.20 kg of

resin per kg), including filling / grouting and finishing

complete as per direction of Engineer-in-charge.

a) Size of Tile 600x600 mm

26 Providing and fixing M.S. plain grills of required pattern to 113.52 Kg 121.95

M.S. flats of windows etc. with M.S. flats at required

spacing and frame round, square or round bar, with round

headed bolts and nuts or by screws plain grill with one

coat of red lead paint & two coats on new steel and other

metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface of all dirt,

dust and other foreign matter.

27 Providing and fixing 16G ASIS 304 Grade stainless steel 57.83 Rmt 3504.70

railing comprising 50mm dia railing fixed on 32 X 32 mm

SS Square pipe of 845mm height, square pipe placed at

maximum 1200mm C/C distance along with three SS

horizontal members of 16mm dia connected at the side of

baluster with SS brackets. The balustrade shall be

mounted on floor with base plate using specially designed

anchor fasteners and concealed by 16G ASIS 304 Grade

SS base cover cap (Wall thickness of pipes shall be taken

as 1.50mm along with all visible component developed in

high grade SS and wherever required, joints to be filled

with bushings for extra strength)

28 Providing and fixing Stainless steel railing made from 6.47 Rmt 1367.78

anticorrosive 304 grade S S pipe of 50 mm dia (16Gauge)

as handrail fixed in wall using stainless steel supports

fitted in Wall at every 1.00 mt length by screws including

SS dish type cover including accessories as per detailed

drawing as directed etc. complete.

29 Steel work, welded in built up sections framed work 4282.83 Kg. 100.08

including cutting, hoisting, fixing in position and applying a

priming coat of read lead paint. (A)In beams and joists,

channels angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams. Hip and jack

rafters, purlins connected to common rafters and the like,

with two coats on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including

cleaning the surface of all dirt, dust and other foreign

30 Providing and fixing 6.7 mm thick Synthetic indoor 589.43 Sqmt 2040.20

multipurpose sports flooring for badminton, basketball, and

volleyball. Approved by (BWF) badminton world federation

and (FIBA) federation institute of basketball association

and best suitable for organising national and international

standards sports events with 10 YEAR GUARANTY.

Flooring roll length 15 m and width 2 mtrs. ball rebound of

the floor is more than 98%.

Backing: closed cell double foam

Total thickness: 6.7 mm

Total Weight: 3.8 kg/sq.mt

Standard roll length: 15 ± 10%

31 Providing and fixing Synthetic outdoor multipurpose sports 1405.00 sqmt 754.80

flooring for skating rink. Approved by (BWF) badminton

world federation and (FIBA) federation institute of

basketball association and best suitable for organising

national and international standards sports events with

YEAR GUARANTY. Flooring roll length 15 m and width

BOQ for Construction of Compound wall, Pickle Ball Courts and other development works at Indoor

Stadium, F.P. No-35, Dabhoi, Dist - Vadodara

Sr no Description Qty Unit Rate Amount

mtrs. ball rebound of the floor is more than 98%.

Backing: closed cell double foam

Total thickness: 6.7 mm

Total Weight: 3.8 kg/sq.mt

Standard roll length: 15 ± 10%

32 Providing, laying and jointing in true line and level 110 32.50 Rmt 856.03

diameter U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diameter x

149 mm length x 145 mm height at every 2000 mm center

to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

33 Providing and fixing to wall ceiling and floor 10.0 Kg. 32.50 Rmt 280.23

F/Cm2 working pressure polythene pipes of the following

outside Dia. Low density, complete with special flange

compression type fittings, wall clips etc. including making

good the wall ceiling and floor. (F) 75mm

34 Providing laying and jointing in true line and level 40mm 28.64 Rmt 148.12

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

35 Providing laying and jointing in true line and level 25mm 324.39 Rmt 91.84

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

36 Providing laying and jointing in true line and level 15mm 24.70 Rmt 72.65

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings make PRINCE / SUPREME / ASTRAL / FINOLEX

or equivalent as approved by Engineer In Charge. Pipe

shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent, including cost

of all materials.

37 Constructing brick masonary for underground C.I 8.00 Each 7180.44

Inspection chamber and bends with bricks having crushing

strength not less then 35 kg/cm2 in c:m 1 :5 FRC cover

with frame (light duty) 445 mm x 610 mm internal

dimensions total weight of cover with frame to be not less

than 38 Kg (Wt.of cover 23 Kg.) and Wt. of frame 15 Kg.

R.C.C. top slab with 1:2:4 mix (1-cement : 2-coarse sand :

4-graded stone aggregate 20 mm size) foundation

concrete 1:5:10 inside plaster 15 mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete. (iii)

Inside dimensions 600 mm X 850mm and 450 mm deep

BOQ for Construction of Compound wall, Pickle Ball Courts and other development works at Indoor

Stadium, F.P. No-35, Dabhoi, Dist - Vadodara

Sr no Description Qty Unit Rate Amount

for pipelines with three or more inlets

38 Supply, Installation, Testing and Commissioning of 100 1.00 Nos 2319.97

mm dia Pressure Gauge (for all pipes) of range 0 - 15 Kg /

cm² conforming to IS - 3624 having bourdon tube of

stainless steel 310 in cast aluminium, stove enamelled,

black, weather proof case with outer, screwed aluminium

bezel and complete with necessary U-type stainless steel

siphon tube and cock including providing suitably painted

angle iron support to the tube etc.as per specification

complete as required.

39 Providing, laying, testing & commissioning of 'B' class 48.50 Rmt 1643.27

heavy duty G.I. pipe Conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts,

bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required :

40 Supplying & fixing 63 mm dia gun metal short branch pipe 4.00 Nos 2426.02

with 20 mm nominal internal diameter size nozzle

conforming to IS 903 suitable for instantaneous connection

to interconnect hose pipe coupling as required: Gun metal

41 Providing laying and jointing in true line and level 50mm 170.58 Rmt 195.67

dia. U.P.V.C. Pipe (SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

42 Providing, laying, testing & commissioning of 'B' class 9.00 Rmt 2291.69

heavy duty G.I. pipe Conforming to IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nuts,

bolts, gaskets etc. and fixing the pipe on the wall/ceiling

with suitable clamp/support frame and painting with two or

more coats of synthetic enamel paint of required shade

complete as required : GI Pipe 150MM

43 Supplying, fixing, testing and commissioning of butterfly 3.00 Nos 8785.99

valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

marked complete with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as required:

44 The all-inclusive comprehensive annual maintenance 5.00 PER KW 5564.09

contract cost covers yearly maintenance of solar Pv

Modules, Inverter, wiring, earthing, switchgears, etc with

material and labour cost including preventive

maintenance. The cost covers entire installation. AMC also

includes monthly site visit and inspection of project with

submission of inspection and solar generation report. All

parts should be replaced/repaired if found faulty within

specified time. Agency has to provide necessary licening

work for warranty, power, Bidirectional meter etc

(A) 1KW-10KW System