KMDA/CIVIL/05/EE(CRS)/E and AM OF 2020-21 Dated 30.12.2020

Amount

Suppling, fitting and fixing the Auditorium chair of Godrej make model Audi 2 APO. The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric and moulded Polyurethane foam. The back is flexing type.BACK SIZE:47.0cm. (W) X 51.0cm. (H),SEAT SIZE:47.0cm. (W) X 47.0cm. (D).The Polyurethane foam is moulded with density = 45 +/- 2 kg/m3 and Hardness = 20 +/- 2 kg. on Hampden machine at 25% compression.The one-piece armrests size: 55mm wide x 340mm long (aprox) are made of black integral skin polyurethane foam with 50-70 Shore hardness and reinforced with M.S. insert. The armrests are scratch and weather resistant.The permanent contact mechanism is designed with the following features:14° maximum back-tilt only.Tilt tension adjustment.It is made of Dia. 2.54cm. (1”) x 16BG. thk. M.S. E.R.W. tube with connecting strips made of 0.5cm. thk. HR Steel welded to it for holding the seat. The assembly is powder coated.

Suppling, fitting and fixing of Stage Main Chair Model 7001D of Godrej make. The seat / back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. The chair is available in four models.BACK SIZE:50.0cm. (W) X 72.0cm. (H).SEAT SIZE: 50.0cm. (W) X 46.0cm. (D).The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression.The seat cover is injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets.The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.5cm. thk. HR steel.The center pivot mechanism is designed with the following features: 3600 revolving type.17° maximum tilt on pivot at center.Tilt tension adjustment.Upright locking.The pneumatic height adjustment has an adjustment stroke of 10.0 cm.The bellow is 3 piece telescopic type and injection moulded in black Polypropylene.The pedestal is made of HR steel and fitted with 5 nos. twin wheel castors (castor wheel dia. 5.0cm.). The pedestal is covered with a P.P moulded cladding for modern and aesthetic looks. The pedestal is 65.0 cm. pitch-center dia. (75.0 cm with castors).The twin wheel castors are injection moulded in 30% Glass Filled black Nylon.

Suppling, fitting and fixing of Stage Chair Kareena Visito. The seat is made up of 1.2 cm. thick hot pressed plywood upholstered with fabric and moulded Polyurethane Foam. The back is made up 1.2-cm. thk. hot pressed plywood upholstered with replaceable fabric upholstery covers and moulded polyurethane foam. The back ply and foam is designed with contoured lumber support for comfortable seating posture.BACK SIZE:48cm. (W) X 66.0cm. (H).SEAT SIZE:50.0cm. (W) X 49.5cm. (H).The polyurethane foam for seat and back is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2.The armrest top is injection moulded from polyurethene(P.U) and mounted on to a fixed type M.S. tubular armrest support. The arm support has static vertical adjustment of +/-1.5cm.Leg frame welded assembly made from 35 X 15 X 16BG(1.6THK) elliptical MS ERW tube with base plate for seat fixing.

Suppling, fitting and fixing of Godrej make Namaste Desk with chair. NAMASTE Fronttype: The understructure is made with steel ERW tube section(IS:228) of size 80x40x2.5mm thick with powder coat finish.Understructure consists of two welded leg assemblies connected by means of welded seat side tube assy and welded desk side tube assy on both sides.Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure.Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts.Side clads:Two side clads made of 35mm thk plt with 2mm thk pvc lipping.Desk side clad made of 18mm thk plt & seat side clad &connecting clad made of 25mm thk plt .Desklet:Desk has opening & closing mechanism by means of desk slider and slider sleeve made of 30% glass filled nylon-6.Desk comprises of plt desk with aluminium section anodized finish on to sides and TPE rubber on to aluminium section outer side for cushioning effect for desk opening closing.Desk made of 18mm thk plt fixed with aluminum extrusion on to sides for desk opening closing.Seat:Seat has self closing mechanism which will operate by means of spring.Seat understructure is a combination of welded fabricated structure made of Ø19X2mmthk ERW tube with powdercoat finsih which is covered by 0.8mm thk sheetmetal cover and uphlosted with moulded foam inside and leatherite cover.Seat back comprises of ply with moulded foam upholosted inside & leatherite cover.Wire carrier:Wire carrier made of 0.8mm thk sheet metal for holding wire passings.Switch box:Switch box made of 1.2mm thk sheet metal for switch plate mounting suitable for anchor roma plates.Front clad Mounting:Front clad mounting made of 18MM thk plt with sheet metal cover and bracket for holding on to top and mounting box for holding of clad with seat side clad. NAMASTE Midtype :- The understructure is made with steel ERW tube section(IS:228) of size 80x40x2.5mm thick with powder coat finish.Understructure consists of two welded leg assemblies connected by means of welded seat side tube assy and welded desk side tube assy on both sides.Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure.Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts.Side clads:Two side clads made of 35mm thk plt with 2mm thk pvc lipping.Desk side clad made of 18mm thk plt & seat side clad &connecting clad made of 25mm thk plt .Desklet:Desk has opening & closing mechanism by means of desk slider and slider sleeve made of 30% glass filled nylon-6.Desk comprises of plt desk with aluminium section anodized finish on to sides and TPE rubber on to aluminium section outer side for cushioning effect for desk opening closing.Desk made of 18mm thk plt fixed with aluminum extrusion on to sides for desk opening closing.Seat:Seat has self closing mechanism which will operate by means of spring.Seat understructure is a combination of welded fabricated structure made of Ø19X2mmthk ERW tube with powdercoat finsih which is covered by 0.8mm thk sheetmetal cover and uphlosted with moulded foam inside and leatherite cover.Seat back comprises of ply with moulded foam upholosted inside & leatherite cover.Wire carrier:Wire carrier made of 0.8mm thk sheet metal for holding wire passings.Switch box:Switch box made of 1.2mm thk sheet metal for switch plate mounting suitable for anchor roma plates.Front clad Mounting:Front clad mounting made of 18MM thk plt with sheet metal cover and bracket for holding on to top and mounting box for holding of clad with seat side clad. NAMASTE Reartype : The understructure is made with steel ERW tube section(IS:228) of size 80x40x2.5mm thick with powder coat finish.Understructure consists of two welded leg assemblies connected by means of welded seat side tube assy and welded desk side tube assy on both sides.Sturdy anchoring by anchor bolts on to base of 10mm thk plate for proper resting of structure.Plastic clad & shoe main clad made of glass filled 30% nylon-6 for covering anchor bolts.Side clads:Two side clads made of 35mm thk plt with 2mm thk pvc lipping.Desk side clad made of 18mm thk plt & seat side clad &connecting clad made of 25mm thk plt .Desklet:Desk has opening & closing mechanism by means of desk slider and slider sleeve made of 30% glass filled nylon-6.Desk comprises of plt desk with aluminium section anodized finish on to sides and TPE rubber on to aluminium section outer side for cushioning effect for desk opening closing.Desk made of 18mm thk plt fixed with aluminum extrusion on to sides for desk opening closing.Seat:Seat has self closing mechanism which will operate by means of spring.Seat understructure is a combination of welded fabricated structure made of Ø19X2mmthk ERW tube with powdercoat finsih which is covered by 0.8mm thk sheetmetal cover and uphlosted with moulded foam inside and leatherite cover.Seat back comprises of ply with moulded foam upholosted inside & leatherite cover.Wire carrier:Wire carrier made of 0.8mm thk sheet metal for holding wire passings.Switch box:Switch box made of 1.2mm thk sheet metal for switch plate mounting suitable for anchor roma plates.Front clad Mounting:Front clad mounting made of 18MM thk plt with sheet metal cover and bracket for holding on to top and mounting box for holding of clad with seat side clad.

DESIGN-M

Agricultural Machinery Mart