Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.8 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹7.3 L+₹50,771.62 (7.49%)Rejected-Finance UMAIRA MANZIL KANNUR PO KASARAGOD | 2 | Rejected-Finance L2 | |
| 3 | 3₹7.6 L+₹85,945.47 (12.7%)Rejected-Finance | 3 | Rejected-Finance L3 | |
| 4 | 4₹8.2 L+₹1.4 L (20.3%)Rejected-Finance | 4 | Rejected-Finance L4 |
| Sl No | Description | Qty | Unit | MANZOOR KUNHAMOO L2 | VINOD V.K L1 | MUHAMMAD KAISE C.A L4 | AHMAD FAROOK K L3 |
|---|---|---|---|---|---|---|---|
| 1.00HALL | |||||||
| 1.00 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 23.04 | sqm | 312.41 ₹7,197.93 | 290.4 ₹6,690.82 Lowest | 327.49 ₹7,545.37 | 327.49 ₹7,545.37 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 4.35 | cum | 7,472.25 ₹32,519.23 | 6,880 ₹29,941.76 Lowest | 7,832.83 ₹34,088.48 | 7,832.83 ₹34,088.48 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 2,760.29 | kg | 157.17 ₹4,33,835.09 | 146.23 ₹4,03,637.5 Lowest | 180 ₹4,96,852.56 | 164.76 ₹4,54,785.71 |
| 1.00 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 377.16 | kilogram | 94.4 ₹35,603.9 | 88 ₹33,190.08 Lowest | 98.96 ₹37,323.75 | 98.96 ₹37,323.75 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 209.76 | sqm | 681.33 ₹1,42,919.19 | 635.2 ₹1,33,242.73 Lowest | 760 ₹1,59,421.4 | 714.2 ₹1,49,814.16 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 37.1 | metre | 457.14 ₹16,959.89 | 424.8 ₹15,760.08 Lowest | 479.2 ₹17,778.32 | 479.2 ₹17,778.32 |
| 1.01 | OD357130/2025-2026: Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. | 9.12 | cum | 5,664.62 ₹51,661.33 | 5,280 ₹48,153.6 Lowest | 5,937.97 ₹54,154.29 | 5,937.97 ₹54,154.29 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 19.84 | sqm | 299.15 ₹5,935.14 | 270.4 ₹5,364.74 Lowest | 313.59 ₹6,221.63 | 313.59 ₹6,221.63 |
| 1.01 | 13.37.1:White washing with lime to give an even shade:New work (three or more coats) | 19.84 | sqm | 32.9 ₹652.74 | 31.2 ₹619.01 Lowest | 34.48 ₹684.08 | 34.48 ₹684.08 |
Tender Value
₹8.5 L
EMD Value
₹21,180
Closing Date
23 Jan 2026, 6:00 pmClosed
Assistant Executive Engineer
LSGD Sub Division Kanhanagd
Annual Plan-KBP-2025-26, Proj. No- 207/26, Construction of Conference Hall on the first floor of Periya Community Hall
2026_LSGD_828332_1
AE/KBP/TN/04/04/2025-26
Open Tender
Civil Works - Buildings
Item Rate
180 days
Periya
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,870
Yes
₹21,180
Yes
17 May 2026
16 Jan 2026
27 Jan 2026
16 Jan 2026
23 Jan 2026
16 Jan 2026
5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
OD357130/2025-2026: Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc.
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.37.1:White washing with lime to give an even shade:New work (three or more coats)
13.71:Lettering with black Japan pint of approved brand and manufacture
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1390505.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
Bidoc.pdf
Tender Documents • 1.89 MB
BOQ_1390505.xls
BOQ • 0.30 MB
format_e_payment.pdf
Other Document • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .