Addition and Alteration work of Judicial Staff Quarters of D type (3 unit) at Devgadh baria Ta. Devgadh baria Dist. Dahod

Name of Work :- Addition and Alteration work of Judicial Staff Quarters of

"D" type (3 unit) at Devgadh baria Ta. Devgadh baria Dist. Dahod

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

1 Dismentaling tiled of stone floors laid in mortar including stacking of 24.00 Sq.m. 50.28

serviceable materials and disposal of unserviceable materials with all

2 Demolition of terrace including stacking of serviceable materials and 874.00 Sq.m. 66.87

disposal of unserviceable materials with all lead and lift. (i) Brick tile

3 Dismentling expanded metal or I.R.C. Fabric with necessary 30.00 Sq.m. 58.49

battens and beadings including frame work and stacking the

serviceable materials with all lead and lift.

4 Providing and laying broken china mosaic flooring for terrace using 860.00 Sq.m. 779.70

12 mm to 20 mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and to be tempered to bring mortar creme

out upto surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall, clearing with water and

oxalic acid etc. as directed.

5 Providing and fixing 30 mm wire gauge shutters using galvanised 40.00 Sq.m. 2823.19

M.S. wire of I.S. gauge designation of 85 G. with wire of 0.56 mm dia,

for doors, windows and clearstory windows including anodised

alluminium butt hinges with necessary screws. (A) Indian teak wood.

6 Providing and laying vitrified tiles 8 mm to 10mm thick, 24" x 24" in 30.00 Sq.m. 1120.36

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand) finishing with flush

pointing in white cement.

7 Providing and fixing precast Rubber Dye / steel Dye inter locking 75.00 Sq.m. 702.02

concrete block 60mm thick with grade of concrete M-300 pneumatic

compressed / vibrated mechanically and as per approved design

confirming to IS 15658 : 2006 including 35 mm sand layer for levelling

and filling the joint with sand in proper line and level as per guidelines

of IRC : SP 63-2018 etc. complete.

8 Providing and laying half brick masonary in common burnt clay 68.00 Sq.m. 590.01

building conventional type bricks having crushing strength not less

than 35 kg./Sq.cm. in foundation and plinth in Cement Mortar 1:4 (1

Cement : 4 coarse sand) including the cost of all materials and labour

charges etc. complete.

9 Providing 15mm thick cement plaster in single coat on rough side of 140.00 Sq.m. 179.56

single or half brick walls for interior plastering in cement mortar 1:4 (1

cement : 4 sand) including watering & curing etc. complete for all

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

10 Providing & fixing cupboard shutter in wall using 18 mm thick 12.00 Sq.m. 2731.04

plywood Termite proof (Green play or equivalent), 6 mm thick plywood

Termite proof with teakwood batten 25 mm x 10 mm & including with

frame 75 mm x 30 mm size on shutter as directed etc. complete

including necessary 1mm lamination on outer side & 0.80 mm white

lamination on inner side, fixing by necessary SS hinges, handles,

magnet, stoppers, etc. as directed including fevicol, and other

hardware material required. Plywood and all fixtures shall be of ISI

quality and as approved by engineer-in-charge including cost of one

coat of primer and two coats of oil painting or polishing as directed.

11 Providing and fixing FRP frame size 100 x 50 mm and 28mm thick 7.00 Sq.m. 2377.76

FRP depress panel shutter having extra reinforcement on sides &

edges in gel coat finish. The core of the shutter & frame is to be filed

up with injected fire retardant grade polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges

& fixtures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with necessary screws & alluminium

fixtures & fastenings & fastener sleeve.

12 Providing and laying machine cut, polished Granite stone slab 18 5.00 Sq.m. 2969.40

mm thick for vertical jambs, top and bottom sill stair landing and

table top wash basin etc. and cladding as per the design and laid on

20 mm thick cement mortar 1:2 (1 cement : 2 coarse sand) jointed

with grey cement slurry including rubbing and polishing, finishing etc.

13 Providing and laying ordinary cement concrete M-200 Trimix Road 17.00 Cum 4458.14

including curing etc. complete over prepared sub base providing and

fixing centering of M.S. channels of 200 mm x 100 mm as per

required level slope, grade and 200mm thickness of concrete road

including levelling of placed concrete with surface vibrators finishing

surface with power floater and trowel light booming on the surface

including providing and filling expansion joint using asphalt 12mm

thick asphalt filler joints as per manufacturers specifications and

making construction joint of 3 mm x 20 mm by using concrete cutter

machine etc. complete as directed. 150mm thick.

14 Providing and fixing 6 mm thick Lexan Polycarbonate multi wall 18.00 Sq.m. 1441.90

roofing sheet fixed with hilti screw and rubber silicon sealer and

alluminium strip of size 50 x 3 mm etc complete as directed by

Engineer in charge.

15 Providing & fixing Street Light as direction of in charge Engineer. 3.00 Each 15150.00

16 Providing and casting in situ ordinary cement concrete M-150 for 2.00 Cum 3773.56

coping, over riding returns including formwork curing and finishing

17 Providing I.S.I. mark T.M.T. Fe-500D bar reinforcement for R.C.C. 306.00 Kg. 77.29

work including bending, binding and placing in position complete upto

floor two level.

i.e. Rs. Twelve Lakhs, Thirty Nine Thousand Fifty One and Two Paisa Only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Limkheda (R & B) Sub Division, Dahod (R & B) Division, Dahod (R & B) Division,

Limkheda Dahod Dahod