Re Tender For Construction Of Buildings At 507 SSTC Location For Establishment of Rear 759 BRTF comma 507 SSTC comma rear 1059 Field Workshop And 1029 IESPL at Chandigarh Location Under 38 BRTF Project Deepak in the Union Territory of Chandigarh

Amount

SCHEDULE "A" Part - I (BUILDING WORKS) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART-II ( EARTH WORK AND SITE CLEARENCE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (STORM DRAIN) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -X (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

INTERNAL WATER SUPPLY Supply & fixing 20 mm dia regular body concealed stop cock Jaguar make (ALD-089Ft) or equevlent Exposed part kit Jaguar make ( CON-083FTK) or equevlent of concealed stop cock with fitting sleeve etc complete screwed both ends for pipe or for unions and fixed suitable for 20 mm bore of pipe , complete all as specified.Tree/Kohler brand.

Supply & fixing 20 mm dia Jaguar make Angular stop cock ( CON-053KN) or equevlent complete all as specified. in Crab Tree/Kohler brand.

Supply & fixing 20 mm dia Jaguar make 2 way bib cock ( CON-041KN) or equevlent complete all as specified. in Crab Tree/Kohler brand.

Supply & fixing Jaguar make ACN-1153N Toilet Roll Holder with Flap) or equevlent complete all as specified.

Supply & fixing Jaguar make health faucet( ALD-CHR-583 Health Faucet (ABS Body) with 1 Meter Long PVC Tube & Wall Hook) or equevlent complete all as specified.

Supply & fixing 20 mm dia Bib taps (CQT-CHR-23037UPRG ) with restrictor 2.5 LPM at 3 bar pressure or equevlent complete all as specified.

Supply & fixing wall mixer Jaguar make ( CQT-CHR-23273G) equevlent with provision for over head shower with 115 mm long bend pipe on upper side, connecting legs, wall flenges & flow ristrictor of 2.5 LPM at 3 bar pressure complete all as specified

Supply & fixing Over head shower 100 MM DIA Jaguar make ( OHS-CHR-1989GA) single flow ( ABS body chrome plated with grey face plate) with rubit cleaning system and flow restrictor 6.0 LPM at 3 bar pressure and with Shower arm (SHA-CHR-477P) with wall flengecomplete all as specified.

Supply & fixing 20 mm dia long body taps (CQT-CHR-23037 ) with restrictor 2.5 LPM at 3 bar pressure or equevlent complete all as specified.

Supply & fixing of pvc flexible pipe connections complete all as specified.

INTERNAL ELECTRIC SUPPLY S & F modular type bell push flush suitable for 215V, 50Hz 5Amp One way . complete all as specified and directed. Make: Havells /Anchor/Plaza.

S & F modular type 1 moduie TV socket with grip white 215V complete all as specified and directed. Make:Havells /Anchor/Plaza.

S & F Decorative wall mounting bracket light finish fixture with textured glass including angular/ batten type lamp holder suitable for 10 watt LED Lamp 230V, LED type fitting lighting fixture with extruded polycarbonate, energy efficient complete including housing all pre wire with high efficiency fixed to wall including connection by flexible 1.5 sqmm, PVC cable with stranded copper conductor from point wiring to connector of the fitting , complete all as specified. Make: Syska/Crompton Greaves /Philips, ISI marked

S & F LED wall mounting Mirror light, finish fixture with textured slim LED batten in aluminium housing decorative end caps , protected from dust and insects , 10 watt LED ,230V, fitting lighting with extruded polycarbonate, energy efficient complete including housing all pre wire with high efficiency fixed to wall including connection by flexible 1.5 sqmm, PVC cable with stranded copper conductor from ceiling rose to connector of the fitting , complete all as specified. Make: Syska/Crompton Greaves /Philips, ISI marked

LED tube light fittings 1x20W 230V, 4 feet long, energy efficient decorative ulta slim squre profile liner LED type fitting lighting fixture with extruded polycarbonate, energy efficient complete including housing all pre wire with high efficiency fixed to wall including connection by flexible 1.5 sqmm, PVC cable with stranded copper conductor from ceiling rose to connector of the fitting , complete all as specified. Make: Syska/Crompton Greaves /Philips, ISI marked

LED light fittings 1x10W 230V, 2 feet long, energy efficient decorative box type fitting with blue colour end caps for LED type fitting lighting fixture with extruded polycarbonate, energy efficient complete including housing all pre wire with high efficiency fixed to wall including connection by flexible 1.5 sqmm, PVC cable with stranded copper conductor from ceiling rose to connector of the fitting, complete all as specified. Make: Syska/Crompton Greaves /Philips, ISI marked

LED 2x2 Decorative recessed/surface mounted mirror optic luminaire with serrated aluminium cross louver and white engineering plasxtic 45 watt LED type with and including complete all as specified and directed. Make: Syska/Crompton Greaves /Philips, ISI marked

Supply and fixing LED Lamp 10 watt, suitable for angular/ batten type lamp holder complete all as specified (Make : Philips/HAVELLS/Crompton).

Supply and fixing Ceiling fan 1200 mm sweep, Anti Dust, 5 star rating with down rod, canopy with out fan regulator and connecting up with and including provision of 3 core flexible PVC cable with standard copper condutor of size 1.5 sqmm form ceiling rose/connector to ceiling fan complete all as specified and as directed. Make : Havells/USHA/Anchor

Supply and fixing Exhaust fan,metal body havy duty AC single phase 300mm sweep, 1400 RPM complete with louvers protection when not in use, silent operation, rust proof body and blades and connecting up with and including provision of 3 single core PVC insulated copper conductor flexible cable of size 1.5 sqmm from ceiling rose/connector to fan out side lovering complete all as specified and directed. Make: Usha/Bajaj/Crompton Greaves.

Supply and installed Water Heater storage type 25 ltr capacity, 1500 watt,AC 240 volt ISI Marked , 5 star rating , complete with all necessary items all as specified and directed. Make : BAJAJ/ Symphony.

M & L powder coated sheet metal enclousres with Indstrial plug & socket with plug top and MCBs single pole with a 2 pin and earth plug and socket complete with MCB SPN 16 Amps for Geyser point.

M&L for VTPN 4 Way DB, Double door powder coated Sheet Metal enclousre, fabricated out of 3.15mm CRCA Sheet of sutable size , with 4 Nos alum bus-bar of sutable size 200 Amps rating, mounted on procelain insulatours prewired complete with provision of fixing of 1 Nos of MCCB Four Ploe 100 / 125 Amps and 4 Nos MCB TPN 40 / 63 Amps all as spcified and directed.

M&L MCB TPN 40 Amps 415 Volts suitable for lighting load, 50 Hz, 10 kA ISI Marked as per IS/IEC 60898-1 2002 Integrated label holder sliding bottom clamp Efficient air channels color coded On/Off indicaton IP 20 protected terminals of under mentioned types and rating (To be housed in DBs) here in before including making all electrical connection with suitable size of copper lugs complete all as directed of make Legeand/ STANDARD/ Indo-Asian.-

M&L MCB TPN 63 Amps 415 Volts suitable for lighting load, 50 Hz, 10 kA ISI Marked as per IS/IEC 60898-1 2002 Integrated label holder sliding bottom clamp Efficient air channels color coded On/Off indicaton IP 20 protected terminals of under mentioned types and rating (To be housed in DBs) here in before including making all electrical connection with suitable size of copper lugs complete all as directed of make Legeand/ STANDARD/ Indo-Asian.-

M&L MCCBs suitable for lighting load, 63 Amps,50 Hz, 25 kA, ISI Marked as per IS/IEC 60898-1 2002 Integrated label holder Efficient air channels color coded On/Off indicaton IP 20 protected terminals here in before including making all electrical connection with suitable size of copper lugs complete all as directed of make Legeand/ STANDARD/ Indo-Asian.-

M&L MCCBs suitable for lighting load, 100 Amps,50 Hz, 25 kA, ISI Marked as per IS/IEC 60898-1 2002 Integrated label holder Efficient air channels color coded On/Off indicaton IP 20 protected terminals here in before including making all electrical connection with suitable size of copper lugs complete all as directed of make Legeand/ STANDARD/ Indo-Asian.-

M&L MCCBs suitable for lighting load, 120 Amps,50 Hz, 25 kA, ISI Marked as per IS/IEC 60898-1 2002 Integrated label holder Efficient air channels color coded On/Off indicaton IP 20 protected terminals here in before including making all electrical connection with suitable size of copper lugs complete all as directed of make Legeand/ STANDARD/ Indo-Asian.-

Supply and fix Temper proof kWh meter AC Single phase, 2 wire solid state(static) fully Electronic energy meter, Accuracy class 1.0 & Current rating 5-30 Amp, with backlit LCD Display for 240 Volt system fitted with pilfer proof meter Box complete all as specified.

M & L for Bldg security light light bracket made out of GI pipe light grade 40 mm dia 1.5 mtr length bent to shape and reduced to required size at top upto 1.8 m length by cutting, welding and well finishing including MS clamp of flat iron of size 40 x 6 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer.

S & F LED Bldg security light fittings 1X60 watts made out of pressure die cast housing & toughened glass with epoxy powder coated finish with IP65 protection including control gear box complete all as specified and as directed. Make :- Surya /Havell's

EXTERNAL ELECTRIC SUPPLY M&L for maintenance free Chamical earthing system as per IS Code 3043:2018 IEEE-80,IEC62561-2 using ISOGEL with copper bonded rod 10 feet length, 17.2 mm dia (min copper bonding shall be 250 micron ) UL Listed and is CPRI Approved for 25 KA fault currentalong with exothermic weld busbar of copper 25x6x200 mm with copper bonded rod and earth enhancement meterial with resistivity of less then 0.12 Ohms the earth pit chamber cover shall be made of plastic material and presence of Engineer in Charge Necessary test certificate, standard earth resistance value and 2 year of Gurranty shall be provided complete all as specified and directed. Make: JMV

Supply and fix 11 KV HT Metering cubicle of different CT ratio, both side cable entry type with LBS (with DLMS meter ) 11 KV class 0.2,3 CT's & 3 PT's of 10/1A complete with transperent cover TTB, 30x8 mm copper busbar and One No of meter for 3 phase 4 wire metering, panel fabricated out of 3 mm MS sheet duly epoxy powder coated including PCC foundation for mounting the metering cubicle all as per latest CPRI specifications including GSM Modem. Model No: ARG 45 of AMI Tech (India) Pvt Ltd/ CPRI Approved and as directed. Make of CT/PT : Schnieder / ABB / Siemens. Make of Meter : L&T/ Secure.

S & F LED Landscape lighting luminaires outdoor LED Bollard lights for garden 1x 20 watt, 220-240 VAC,50 Hz, Cylindrical shaped powder coated aluminum pressure die housing, IP65, High lngress protection against dust & moisture cool white luminaries all accessories prewired including necessary electrical connection and fixing the fitting with light grade GI pipe 1x1 PCC foudation brackets, 1m length, cut to length fixed to poles with MS clamps with nuts, bolts complete.

S & F LED post top lantern light 1x 45 watt, 220-240 VAC,50 Hz, lighting luminaries warm white Elegant and conical plesing design with powde coated finish using high heat conductivity IP65, High lngress protection against dust & moisture , mounting attachment with all accessories such as electronic all accessories prewired including necessary electrical connection and fixing the fitting with 40mm bore light grade GI pipe gate light brackets, cut to length, bent to shape as directed and fixed to Main Gate MS clamps with nuts, bolts complete.

S & F LED street light 1x 60 watt luminaries deep drawn aluminum housing with acrylic cover and cast aluminum pipe mounting attachment with all accessories such as electronic terminal block etc and all accessories prewired including necessary electrical connection and fixing the fitting with 40mm bore light grade GI pipe street light brackets, 1.5m length, cut to length, bent to shape as directed and fixed to poles with 2 nos ,40x6mm MS clamps with nuts, bolts complete

Supply and fix junction box made out of CRCA sheet3.15mm thick suitable size including - 04 Nos cable terminal, 01 NosDIN rail and 01 No, MCB SP, 10 Amps 10 KA (Breaking capacity) etc

Supply, erection, testing and commissioning KIOSK outdoor type LT feeder pillar box, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and having 4 Nos copper bus bar for distribution system and type tested at CPRI, fabricated . The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel base frame at bottom. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings.. (Main Panel for T/F400 KVA) BUS BARS AND INTERNAL CONNECTIONS : The bus bars shall be made of Copper,800 Amps rated 03 Nos and 400 Amps for neutral duly insulated with 1100 Volts grade standard colour coded PVC sleeves and rigidly mounted on suitable size 'F' class insulators of non hygroscopic non combustable, all internal connections from main bus bars to switch gears etc PROVISION FOR CABLE ENTRY :- The provision for cable entry/exit shall be provided in the bottom for both incoming and outgoing cables.

INCOMING : 4 pole Air Circuit breaker having breaking capacity 50 kA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 630 Amps. - 01 No, 4 pole MCCB TP having breaking capacity 35 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 4000 Amps. - 01 Nos OUTGOINGS : (a) 4 pole MCCB TP having breaking capacity 35 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 300 Amps. - 01 Nos (b) 4 pole MCCB TP having breaking capacity 35 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 100 amps. - 03 Nos (c) 4 pole MCCB TP having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 150 Amps. - 01 Nos (d) Capacitor bank 140 KVAR, 400 Amps 4 pole MCCB TP having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 250 Amps. - 01 Nos (e) MCB TPN of rating 25 Amps having breaking capacity 10 KA - 01 No (f) MCB SPn of rating 16 Amps having breaking capacity 10 KA - 06 No (g) MCB SP of rating 10 Amps having breaking capacity 10 KA - 4 No

Supply, erection, testing and commissioning KIOSK outdoor type LT feeder pillar box, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and having 4 Nos copper bus bar for distribution system and type tested at CPRI, fabricated . The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel base frame at bottom. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings.. (LT FPB -1) BUS BARS AND INTERNAL CONNECTIONS : The bus bars shall be made of Copper 400 Amps rated 03 Nos and 200 Amps for neutral duly insulated with 1100 Volts grade standard colour coded PVC sleeves and rigidly mounted on suitable size 'F' class insulators of non hygroscopic non combustable, all internal connections from main bus bars to switch gears etc INCOMING : 4 pole MCCB having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 200 Amps. - 01 No

OUTGOINGS : (a) 4 pole MCCB TP having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 160 Amps. - 01 Nos (b) 4 pole MCCB TP having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 100 Amps. - 01 Nos (c) MCB TPN of rating 25 Amps having breaking capacity 10 KA - 01 No (d) MCB SPN of rating 32 Amps having breaking capacity 10 KA - 04 No (e) MCB SP of rating 10 Amps having breaking capacity 10 KA - 4 No

Supply, erection, testing and commissioning KIOSK outdoor type LT feeder pillar box, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and having 4 Nos copper bus bar for distribution system and type tested at CPRI, fabricated . The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel base frame at bottom. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings.. (LT FPB -2) BUS BARS AND INTERNAL CONNECTIONS : The bus bars shall be made of Copper 400 Amps rated 03 Nos and 200 Amps for neutral duly insulated with 1100 Volts grade standard colour coded PVC sleeves and rigidly mounted on suitable size 'F' class insulators of non hygroscopic non combustable, all internal connections from main bus bars to switch gears etc

INCOMING : MCCB TPN having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 160 Amps. - 01 No OUTGOINGS : (a) MCCB TPN having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 100 Amps. - 02 Nos (b) MCB, TPN of rating 25 Amps having breaking capacity 10 KA -01 No. (c) MCB, SPN of rating 32 Amps having breaking capacity 10 KA -04 No. (c) MCB, SPN of rating 32 Amps having breaking capacity 10 KA -04 No. (c) MCB, SP of rating 10 Amps having breaking capacity 10 KA -04 No.

Supply, erection, testing and commissioning KIOSK outdoor type LT feeder pillar box, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and having 4 Nos copper bus bar for distribution system and type tested at CPRI, fabricated . The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel base frame at bottom. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings.. (LT FPB -3) BUS BARS AND INTERNAL CONNECTIONS : The bus bars shall be made of Copper 400 Amps rated 03 Nos and 200 Amps for neutral duly insulated with 1100 Volts grade standard colour coded PVC sleeves and rigidly mounted on suitable size 'F' class insulators of non hygroscopic non combustable, all internal connections from main bus bars to switch gears etc

INCOMING : MCCB TPN having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 160 Amps. - 01 No OUTGOINGS : (a) MCCB TPN having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 100 Amps. - 02 Nos (b) MCB, TPN of rating 25 Amps having breaking capacity 10 KA -01 No. (c) MCB, SPN of rating 32 Amps having breaking capacity 10 KA -04 No. (d) MCB, SP of rating 10 Amps having breaking capacity 10 KA -04 No.

Supply, erection, testing and commissioning KIOSK outdoor type LT feeder pillar box, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and having 4 Nos copper bus bar for distribution system and type tested at CPRI, fabricated . The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel base frame at bottom. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings.. (LT FPB -4) BUS BARS AND INTERNAL CONNECTIONS : The bus bars shall be made of Copper 400 Amps rated 03 Nos and 200 Amps for neutral duly insulated with 1100 Volts grade standard colour coded PVC sleeves and rigidly mounted on suitable size 'F' class insulators of non hygroscopic non combustable, all internal connections from main bus bars to switch gears etc

INCOMING : MCCB TPN having breaking capacity 16 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 160 Amps. - 01 No OUTGOINGS : (a) MCCB TPN having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 100 Amps. - 03 Nos (b) MCB, TPN of rating 25 Amps having breaking capacity 10 KA -01 No. (c) MCB SPN of rating 32 Amps having breaking capacity 10 KA - 04 Nos (d) MCB, SP of rating 10 Amps having breaking capacity 10 KA -04 No.

Supply, erection, testing and commissioning KIOSK outdoor type LT feeder pillar box, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and having 4 Nos copper bus bar for distribution system and type tested at CPRI, fabricated . The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel base frame at bottom. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings.. (LT FPB -4) BUS BARS AND INTERNAL CONNECTIONS : The bus bars shall be made of Copper 400 Amps rated 03 Nos and 200 Amps for neutral duly insulated with 1100 Volts grade standard colour coded PVC sleeves and rigidly mounted on suitable size 'F' class insulators of non hygroscopic non combustable, all internal connections from main bus bars to switch gears etc

INCOMING : MCCB TPN having breaking capacity 16 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 200 Amps. - 01 No OUTGOINGS : (a) MCCB TPN having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 100 Amps. - 02 Nos (b) MCB, TPN of rating 25 Amps having breaking capacity 10 KA -01 No. (c) MCB SPN of rating 32 Amps having breaking capacity 10 KA - 04 Nos (d) MCB, SP of rating 10 Amps having breaking capacity 10 KA -04 No.

Supply, erection, testing and commissioning KIOSK outdoor type LT feeder pillar box, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and having 4 Nos copper bus bar for distribution system and type tested at CPRI, fabricated . The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel base frame at bottom. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings.. (LT FPB -5) BUS BARS AND INTERNAL CONNECTIONS : The bus bars shall be made of Copper 400 Amps rated 03 Nos and 200 Amps for neutral duly insulated with 1100 Volts grade standard colour coded PVC sleeves and rigidly mounted on suitable size 'F' class insulators of non hygroscopic non combustable, all internal connections from main bus bars to switch gears etc

INCOMING : MCCB TPN having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 250 Amps. - 01 No OUTGOINGS : (a) MCCB TPN having breaking capacity 25 KA and microprocessor release , adjustable overload, short circuit, instantaneous and neutral protection of rating 150 Amps. - 01 Nos (a) MCB TPN of rating 25 Amps having breaking capacity 10 KA - 01 No (b) MCB, SPN of rating 32 Amps having breaking capacity 10 KA -06 No. (c) MCB, SP of rating 16 Amps having breaking capacity 10 KA -02 No. (d) MCB, SP of rating 10 Amps having breaking capacity 10 KA -04 No.

Supply, erection, testing and commissioning KIOSK outdoor type LT feeder pillar box, platform mounted, suitable for 3 phase 4 wire, 500 volts AC supply and having 4 Nos copper bus bar for distribution system and type tested at CPRI, fabricated . The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to IS : 13947. The feeder pillar shall be made out of 3.00mm thick CRCA mild steel sheet and 3.00mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel base frame at bottom. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation. The feeder pillar shall be comprising of the followings.. (street light ) BUS BARS AND INTERNAL CONNECTIONS : The bus bars shall be made of Copper 63 Amps rated 04 Nos and63 Amps for neutral duly insulated with 1100 Volts grade standard colour coded PVC sleeves and rigidly mounted on suitable size 'F' class insulators of non hygroscopic non combustable, all internal connections from main bus bars to switch gears etc

INCOMING : MCCB TP of rating 100 Amps having breaking capacity 16 KA - 01 No OUTGOINGS : (a) MCB SP 16 Amps having breaking capacity 10 KA - 05 Nos (b) ML contactor TP 20 amps - 01 No (c) Digital timer single ph with necessary control wiring - 01 No (e) Spare pocket for 01 Nos MCB.

Road work M&L Solar road stud at size 140mm x 128mm x 82mm with shank of 54mm made out of solid aluminium ally shell powered by solar cells and panels mono crystalline solar 2.5 volts/0.3 watt bi-directional with LED lights 06 Nos, Ni-Mh or Ni-cd rechargable battery fixing arrangements as per manufacturing instruction complete all as specified and directed. Make-Aakriti solar Model No-XSRS-01 or equivalent in Aktion/Sun Eyez.

S & F dual (62 bead min) cat eye aluminium casted body of size 100mm x 100mm having ABS plastic strip containing 62 min ratioreflective glass bead of colour white/red/yellow on both sides (min 31 bead on each side) fixed complete with steel zinc plated nails/stud of dia 12mm end of length 120mm complete all as specifiedand directed.Make - Greenlite.

EXTERNAL seawage line S & F 90mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints, complete all as specified and as directed by the Engineer-in-Charge

S & F 110mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints, complete all as specified and as directed by the Engineer-in-Charge

S & F 100mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge

STORM DRAIN M & L for fine gravel , interstices filled, complete all as specified and as directed by the Engineer-in-Charge

M & L for course sand, interstices filled, , complete all as specified and as directed by the Engineer-in-Charge

M & L for garded sand , interstices filled, , complete all as specified and as directed by the Engineer-in-Charge

EXTERNAL WATER SUPPLY Material & Labour construction of brick masonery valve pit of size 1200x1200x1200mm (inetrnal diamension) plastering in cement mortar (1:4) 15mm thick (appx area to be plastered shall be 1.5Sq mm replacement of MS sheet cover (3mm thick) with locking arrangement, hinges and handle, painting to all steel surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified and derected by the Engineer-in-Charge.

Material & Labour construction of brick masonery valve pit of size 900x900x900mm (inetrnal diamension) plastering in cement mortar (1:4) 15mm thick (appx area to be plastered shall be 1.5Sq mm replacement of MS sheet cover (3mm thick) with locking arrangement, hinges and handle, painting to all steel surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified and derected by the Engineer-in-Charge.

Material & Labour construction of brick masonery valve pit of size 600x600x600mm (inetrnal diamension) plastering in cement mortar (1:4) 15mm thick (appx area to be plastered shall be 1.5Sq mm replacement of MS sheet cover (3mm thick) with locking arrangement, hinges and handle, painting to all steel surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified and derected by the Engineer-in-Charge.

Supply and fixing Non Return valve (NRV) with by pass arrangement supplied and installed of size 150 mm dia complete all as specified

Supply, installing, commissioning and testing including connection of LT Outdoor factory made CPRI approved feeder pillar box, cubical type as conforming to IS 5039 (double door), ( IP-54) of suitable size double shutter weather dust and vermin proof having overall hinged opening arrangement in both front and back sides fabricated out of 3.15mm thick CRCA sheet fabricated and frame of angle iron 50x50x6 mm duly welded including cable entry & exist through glands at bottom including two coats of powder coated paint over a coat of red oxide primer on both outer and inner surface of panel, etc with extended legs imbedded in and including PCC 1:3:6 foundation of suitable size all as specified and as directed including following features and accessories/components, all as specified: (Pump House Panel) BUSBAR :- 200 Amps rated copper bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance 4 Nos fixed on procelain insulators.

OUT GOING :- (a) MCB TPN 63 Amps, 16 KA - 01 Nos (b) MCB SPN 6 Amps, 10 KA - 02 Nos (b) Automatic star delta starter to be mounted inside the panel board duly flushed suitable for 30 HP motor with over load relay range 32 A-50 A, coil voltage 380 V- 415 V - 1 Nos

Supply, install, testing and commissioning pumping set, electrically driven horizontal end Suction,centrifugal having stainless steel body and stainless steel parts, centrifugal type confirming to IS- 12469 :1988 with CI Casing , bronze impeller and Stainless steel shaft mounted on heavy duty bearings Suitable for continuous operation with 'range of operation' 0 % to 150 % of rated capacity for 440 V , 3 Phase. 50 Hz 70m Head, 1620 LPM discharge, motor capacity 25 HP suitable for AC supply 415 Volts 3 phase 50 C/S, 1725 RPM all complete incl PCC foundation (Make of pumping set shall be Kirloskar/Jyothi/Calama/ conforming to IS 8034 with latest amendments.

S & F MS column pipe heavy duty both end flanged type of wall thckness 6.0mm of length 3.04 mtr approx 100mm bore conforming to IS-1239 (Part-I) 1996 complete with rubber gasket, bolts, nuts washers for all flanged joints and properly painted with black bituminous paint internally & externally suitable for drinking water all as specified & directed aby Engr-in-charge (Make of MS Pipe shall be JINDAL/BANSAL/PRAKASH/ TATA/SWASTIKA)

S & F in repairs PVC insulated and sheathed flat cable with stranded copper conductors 1100 Volts grade 3 core, 16 Sqmm size complete all as specified and directed by Engr-in-charge. Make of cable shall be FINOLE/PLAZA/INCAB conforming to IS-694/1990.

S & F stranded steel wire rope 12mm dia for fastening pumping set including GI dog clamps bolts, nuts, MS flat iron clamp complete all as specified and directed by the Engr-in-Charge (Make : Usha, Martin or equivalent)

Supply, install and commissioning chlorine pressure single head gear mototred adjustable decrin dozing pump model 96 NGQ 51 high pressure single head gear motored adjustable with accessories incl lead tubing, connecting nuts, injection check valves, clay weight and ferrules with all accessories all as per manifactures design .

Supply, install and commissioning liquid chlorine dozing system consisting of 40-100 Ltrs PE/PRP tank with lid and level guage alon with agitator with shaft and blade in SS-316 (FRP/epoxy coated) plastic mounted on tank complete all as per manifactures design complete

Sharnagat Constructions Private Limited (BID ID -3228977)

M/S SANJEEV KUMAR GOYAL CONTRACTOR (BID ID -3236038)