ISIKOL/EU/NIT-14/25-26 /SL-01

Disposal of building ruhbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts' involved

Dismantling old plaster or skirting raking rout joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

20 mm ciment plaster of mix.: 1:6 (1 cement : 6 fine sand)

Removing loose scales blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint.

Removing old paint from blistered painted surtlice of steel or other metal by chipping including scraping and cleaning and exposing the original surface.

Finishing with Deluxe Multi surface paint system fór interiors and exteriors using Primer as per manufacturers specifications. Two or mort coats appfied on walls @ 1.25 Itr/10 sqm over and inclnding one coat of Special primer applied @ 0.75 ltr /10 sqm for Boundary waIls, Back drop wall, Pillars of Wooden Stage, Professor's Statue, Base of Light Posts, etc.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture. For Grills and Gates surroundings.

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) For Flower pots, tree bases and tree trunks etc.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All wolk up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal.size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls, Under 20 cm wide

Steel reinforcement for R.C.C. work including straightening; cutting, bending, placing in position and binding all complete above-plinth level, Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Providing wood work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners ot required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Finishing with Deluxe Multi surface paint system for interiors and exteriors as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 1tr/10 sqm. over an under coat of primer applied @ 0.75 1tr/10 sqm. of approved brand and manufacture.