Const. of Haryana Roadways Depot Level Workshop at Industrial Area Phase- II, Panchkula (Pdg. 11KV Sub Station, High Mast and Motor Power Wiring Only).

Amount

1: -( c ) Moulded case Circuit breakers. Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 15 amp.to 60 amp. 415 V ,10 KA 3-phase. 31.12 c (i)

: -100 amp.to 220 amp.415 V,10 KA 3-phase. 31.12 c (ii)

: -300 amp. to 400 amp. 415 V , 35 KA 3-phase. 31.12 c (iv)

2: -Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. Miniature circuit breakers of 9 KA breaking capacity. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17a) (ii)

: -TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp. 31.17(a) (ii)

3: -(P) Pipe Laying. Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. Galvanised iron pipe 65 mm dia on flushed. 31.21 (xiv)

4: -(Q) Earthing Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired. 31.22(iii)

: -Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as equired. 31.22(iv)

: -Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode. 31.22(v)

: -Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(x)

: -Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xiv)

: -Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required . 31.22(xi)

: -Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material. 31.22(xv)

: -Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size. 31.22(xix)

5: -Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. (Make Havell’s, Polycab, RR Kabel ). 240 Sq. mm 3.5 Core Cable . 31.26 (xxxiii) Ard.

: -120 Sq. mm 3.5 Core Armoured Cable. 31.26 (xxx)

: - 70 Sq. mm 3.5 Core Cable . 31.26 (xxviii) Ard.

: - 50 Sq. mm 3.5 Core Cable . 31.26 (xxvii) Ard.

: - 95 Sq. mm 3.5 Core Cable . 31.26 (xxix) Ard.

: - 16 Sq. mm 4 Core Cable . 31.26 (xI) Ard.

: - 35 Sq. mm 4 Core Armoured Cable. 31.26 (xIii)

: - 25 Sq. mm 4 Core Armoured Cable. 31.26 (xIi)

6: -Supply and erection of suitable compression type brass cable glands for underground Cable. 10 Sqmm to 16 Sqmm Cable 2 to 4 Core . 31.28 (ii)

: -25 Sqmm to 50 Sqmm Cable 2 to 4 Core. 31.28 (iii)

: -70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core . 31.28(iv)

: -120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core 31.28 (v)

: -240 Sqmm Cable 3 to 3.5 Core . 31.28 (vi)

7: -( T ) Street Light. Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections . 31.30 (IV)

: -Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 9 metres long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom with working load of 200 Kg. burried 1.80 m in ground. 31.30 (VI) (ii)

8: -Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:- M.S.pedestal of size 900 mm wide , 1500 mm high , 450 mm deep and bottom totally open , duly embeded in cement concrete block of size 1050 mm x 600 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster ,having a base of size 1200 mm x 750 mm x 250 mm below ground level . 31.33 (iv)

9: -(X) Miscellaneous . Supply and erection of shock restoration chart in glass frame 31.35 (iv)

10: -Supply and erection of double door sheet steel enclosures distribution boards suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material requared complete the job in all respect upto the entire satisfaction of the Engineer-in Charge of the work. 4-way, SP & N (Horizontal) 31.41 (i)

: -4-way, TP & N (Horizontal) (8+12) 31.41 (iv)

11: -Supply and erection of MS stand made of 50cm×50mm×6cm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below, ground level including the cost of cement sand welding, painting & fabrication charges etc up to the entire satisfaction of the Engineer-in-Charge of work 31.51

12: -Supply and erection of PVC pipe ISI marked (Medium) recessed in wall/ceiling etc including the cost of PVC bends inspecion boxes, iron hooks and cement concrete etc complete in all respect upto the entire satisfaction of engineer-in-charge of work PVC pipe of 32 mm dia 31.58

13: -Supply, Installation, Testing and Commissioning of Wall/ free standing flooor mounting dust & vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/Neoprene rubber gasket of not less than 3 mm thicness seperate detacable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear.Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber Extended solid copper bars up to cable cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors withdetachable extension type structure. The panel will be complete with control wirring (copper) and fuse protection.(only outer area on all sides shall be measured) 31.63

14: -Supply and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. 31.64

16: -Supply and fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect. Rotary handle upto 125 A, MCCB 31.66 (i)

: -Rotary handle above 125 A, MCCB (ii)

17: -S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including digging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in charge of work. HDPE Pipe 63/50 outer dia / inner dia. 31.67 (i)

: -HDPE 90/75 mm outer dia / inner dia ( ii )

18: -S/E of XLPE (E)11 KV HT aluminum conductor armoured cable ISI mark laid in existing pipe /trenches/surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm 3 core XLPE Cable 31.71 ii)

19: -Supply and erection of heat shrinkage type end termination joinnting kit indoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cable / ABC cable complete wityh all the kit comtent including earth continuing connection along with 3 nos.crimpling type aluminum lugs of suitable capacity including making joining etc complete in all respect. Suitable for 16 to 50 sqmm 3core XLPE Cable 31.72 i

20: -Supply and erection of heat shrinkage type end termination joinnting kit indoor type of suitable to accommodate 3 core 11 KV XLPE aluminum cable / ABC cable complete with all the kit comtent including earth continuing connection along with 3 nos.crimplin type aluminum lugs of suitab;le capacity including making joining etc com[plete in all respect. Suitable for 16 to 50 sqmm 3core XLPE Cable 31.73 i

21: -Supply and erection of heavy duty 4 pole ON load changeover load breaker switch comprising of switches 63 amp to 400 amp suitable for operation on 415 V 50 Hz AC supply complete with handle assembly having door interlock & padlocking arrangement on existing panel / including making necessary connections with petty material required to complete the job. 200 amp 4 pole ON load changeover switch 31.74 (i) iv

: -Load Bank 8 way 250 Amp. ii

23: -Supply & erection of cable tray made out of 2 mm thick galavanised perforated sheet steel including erection of the same on wall or ceiling with necessary fixture and other material required to complete the Job in all respect upto the Entire statisfaction of Engineer-in-Charge of the work. 40 x 100 mm 31.81 i

: -50 x 150 mm ii

: -50 x 300 mm iii

24: -Supply & erection of factory manufactureed cable tray cover made of 16g GI Sheet complete with Fastoner Nuts bots and in position including all petty material required to complete the Job in all respect upto the Entire statisfaction of Engineer in Charge of the work Suitable for 40 x 100 mm 31.82 i

: -Suitable for 50 x 150 mm ii

: -Suitable for 50 x 300 mm iii

25: -Supply, installation, testing and Commissioning of 20 Mtr. Long High Mast manufactured from B.S.E.N. 10025 or equivalent grade material in, 2 (two) section hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per IS 875 part-3 suitable for 9/12Nos. Lumnaire loading fully motorized (power tool) with starter & cable complete along with standard accessories supplied by the manufactured with 3 nos. steel wire rope double drum system and twin dome aviation light with LED without foundation but including cost of set of foundation nut and bollts , installation at site complete in all respect upto entire satisfaction of engineer-in-charge. THICKNESS of Top Section =3mm (minimum) Bottom Section =4mm (minimum) Top Dia =150mm Bottom Dia =460mm Thickness of Galavnization= Top=65micron(min) Bottom=85micron (min) 31.83(iii)

26: -Supply, installation, testing & commissioning of 11KV Oil type Outdoor type transformer 200 KVA capacity, 3Phase, 50Hz alongwith spefication i.e. Copper Double Wound, Oil Immersed, Naturally Cooler, Core type Transformer confirming to IS : 1180, with Latest efficiency level with first filling of Oil as per IS : 335. Output- 200KVA, No load voltage ratio at rated voltage & frequency - 11 / 0.433 KV, Cooling type- ONAN, Off Load tap changer, taping range & step (Plus/ Minus/ Step) - (5%/ 10%/ 2.5%), vector group- Dyn-11, Temp rise at rated load on Ambient- 50 Deg C, Paint Shade to IS : 5 (Epoxy) alongwith rating & diagram plate, earthing terminal (2Nos.), lifting lugs, air release hole with plug, dehydrating silica gel breather, magnetic oil level guage, oil filling hole with plug on conservator, oil conservator with drain plug, thermometer pocket, jacking lugs, bottom drain cum filter valve, top flter valve, 4Nos. bi directional rollers, explosion vent with diaphram, marshelling box, 100mm OTI with alarm & trip, WTI with alarm & trip, buchholz relay with alarm & trip, shutt off valves for buchholz relay (2Nos.) Magnetic Oil level gauge, Radiator - fixed & cable box - HV/ LV side complete in all respect upto the entire satisfaction of Engineer- in- charge of work. Make: As per approved make List. NS-1

27: -Supply & erection of 11KV gang operated switch ISI Marked make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H'pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works. NS-2

28: -Supply & erection of lighting arrestor model ISI Marked suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resistar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. NS-3

29: -Supply of 11KVPin Insulator Brown colour with 11KV Gi Pin ISI Marked with Disc fitting T&C type complete in all respect with erection of the same upto the entire satisfaction of the Engineer in Charge of work NS-4

30: -Supply & Erection of Rubber mat of size 2mX1m & 12 mm thick suitable for 11 KV complete in all respect. NS-5

31: -Supply & Erection MS bucket stand which including cost of 6 nos. buckets of 9 liter capacity with sand filling including cost of welding & painting of complete stand & buckets with one coat of red oxide and two coats of approved paint of red colour with all labour & petty material to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work. NS-6

32: -Supply , Erection , testing & comissioning of 11 KV outdoor type HT Metering panel complete with CTs , PTs cubical and electronics Meter with accuracy class 0.2 as per requirement / approved by UHBVN. Panchkula Electrical Supply consisting of following : i)Cubical panel free standing floor mounting type made of sheet steel 14 G SWG CRCA sheet with channel iron base frame spray painted with strong synthetic grey channel paint as per size & design approved by UHBVN. PANCHKULA Electrical Supply.Out door Type with outer canopy. ii)3 nos. 11 KV CTs of 0.2 S accurcy (rating as per requirement given by UHBVN Panchkula). iii)1 no. 11 KV PTs 11000/110 volts 10 VA burden 0.2 accuracy suitable for indoor installation of approved make of UHBVN Panchkula Electrical Supply . iv)Digital electronics meter 3 Phase 4 wire 11000 / 110 volts 10 VA burden 0.2 accuracy for recording reading of KWH of make and rating approved by UHBVN Panchkula Electrical Supply with push button display operating system for different kind of readings . v)Foundation of Suitable Size 300mm above ground level made of CC having suitable size to hold metering panel vi)Outer housing fab by 2mm thick CRCA sheet to cover the HT Metering Panel from rain water alongwith agnle iron frame. vii) The cubical panel will be complete in all respect including interconnections , internal wiring with PVC copper cable its testing / approval of all items by UHBVN Panchkula Electrical Supply with a gurantee of one year from the date of commissioning including cost of all labour & material required to complete the job in all respect upto entire satisfaction of Engineer-in-charge of work.. NS-7

33: -Supply , Erection , testing & commissioning of Stey Set for GO Switch complete in all respect i/cost of Disc insulator etc. upto the entire satisfaction of Engineer -in Charge of work. NS-8

34: -Supply , Erection , testing & commissioning of GI Fancing 7 Feet High From Finish Floor Level supported with GI Angle/ Channel complete in all respect upto the entire satisfaction of Engineer -in Charge of work. NS-9

35: -Supply Installation, testing & commissioning 75 KVAR Capacitor Panel Havells Make, Model No. QHKTCB 5075X0 complete in all respect upto the entire satisfaction of Engineer-in Charge of work. Make as per approved list with equivalent specification. NS-10

36: -Supply and erection of LED Flood Light 200 Watt having lumens efficiency of 110Lumens per watt complete in all respect upto the entire satisfaction of Engineer- in charge of work. Make: Bajaj/ Philips/ Wipro. NS-11

37: -Supply and erection of LED Flood Light 160 Watt having lumens efficiency of 110Lumens per watt complete in all respect upto the entire satisfaction of Engineer- in charge of work. Make: Bajaj/ Philips/ Wipro. NS-12

38: -Supply and erection of LED Flood Light 80 Watt having lumens efficiency of 110Lumens per watt complete in all respect upto the entire satisfaction of Engineer- in charge of work. Make: Bajaj/ Philips/ Wipro. NS-13

39: -Supply and erection of Copper Un Ard Cable 2.5Sqmm 12 Core i/c cost of all labour & matrial required to laying the same in 20Mtr High Mast complete in all respect upto the entire satisfaction of Engineer- in charge of work. Make: Havells/ Polycab/ RR Kabel. NS-14

40: -Supply and erection of Street Light Timer Panel, Astronimal Type, Havell make (Model No. IHXTS0306A) complete in all respect upto the entire satisfaction of Engineer- in charge of work. Make: Havells/ Polycab/ RR Kabel. NS-15

41: -Supply and erection of MCCB Enclosure suitable upto 125A MCCB complete in all respect upto the entire satisfaction of Engineer- in charge of work. Make: L&T/ Schneider /Havells. NS-16

Som Nath Contractor

M/S Mohan Lal Gupta

Baliyan Electrical Works