Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹25.6 L+₹1.1 L (4.55%)Rejected-Finance D NO 9 2 1 1 VUDA QUATERS PITHAPURAM COLONY VISAKHAPATNAM PIN 530 003 | VISAKHAPATANAM | ANDHRA PRADESH | 530003 | L2 | Rejected-Finance Being not L1 | |
| 3 | L3₹27.3 L+₹2.9 L (11.7%)Rejected-Finance 37 10 149 1 AYYAPPA NAGAR MURALINAGAR EAST VISAKHAPATNAM 530 007 INDIA | VISAKHAPATANAM | ANDHRA PRADESH | 530007 | L3 | Rejected-Finance Being not L1 | |
| 4 | L4₹27.4 L+₹3.0 L (12.1%)Rejected-Finance 8 51 PLOT NO 6 LIC COLONY SUJATA NAGAR PENDURTHY MANDAL VISAKHAPATNAM 530042 AP | 530042 | L4 | Rejected-Finance Being not L1 | |
| 5 | L5₹28.8 L+₹4.3 L (17.6%)Rejected-Finance | L5 | Rejected-Finance Being not L1 |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
17 Dec 2021, 6:00 pmClosed
Garrison Engineer Utility-I Visakhapatnam
Garrison Engineer Utility-I Near Samudrika Naval Base Post Visakhapatnam -530 014
REPAIR AND MAINTENANCE OF STREET LIGHTS, GATE LIGHTS, GARDEN LIGHTS, HIGHMAST LIGHTS, PERIMETER SECURITY LIGHTS AND CONNECTED WORKS AT DOLPHIN HILL NAVY ROAD, OFFICERS MD ACCN, SAILORS MD ACCN, TS, ASR, ARSR, VOLNA COMPLEX, DOLPHIN COVE UNDER GE U-I
2021_MES_489429_1
8381/E8
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Garrison Engineer Utility-I Visakhapatnam
CLASS D
8 documents required · 8 mandatory
₹500
Garrison Engineer Utility-I
₹86,000
Yes
28 Feb 2022
20 Nov 2021
18 Dec 2021
20 Nov 2021
17 Dec 2021
4 Dec 2021
Amount
Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m depth and getting out in soft and loose soil complete all as specified and directed.
Returning and filling in of excavated material any type including spreading,levelling,watering and well ramming in layers not exceeding 25 cm each complete all as specified and directed.
Removal of surplus excavated material of any type not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.
M&L for Sand cushioning/sand covering for underground cable protection complete all as specified. Note: Punned thickness only will be measured and paid.
Supply and laying sub class 'B' bricks of old size (approved size locally available) laid along alignment of cable as protection to cable in trenches complete all as specified and directed by Engineer-in-Charge
Supply, fixing and testing straight through joint heat shrinkable type with jointing kit suitable for XLPE insulated armoured heavy duty aluminium conductor 1100 Volts grade Cable 3.5/4 core 16 Sqmm size complete all as directed . Make: 3M / Denson / M-Seal / Raychem
Supply, fixing and testing straight through joint heat shrinkable type with jointing kit suitable for XLPE insulated armoured heavy duty aluminium conductor 1100 Volts grade Cable 3.5/4 core 25 Sqmm- 50 Sqmm size complete all as directed . Make: 3M / Denson / M-Seal / Raychem
Supply & lay or fixing or passing through pipe or in cable ducts, 1100 volts grade, XLPE insulated, armoured, electric power cables (heavy duty) with aluminium conductor of the following sizes including taking down old one complete all as specified and as directed. ( MAKE: Havells / Gloster Cables / CCI )
16 Sqmm 4 core
25 Sqmm 3.5 Core
50 Sqmm 3.5 Core
S&F in repair MCCB 3 Pole, 415 V, adjustable type, 63 to 100 Amps with minimum breaking capacity 16 KA Complete all as specified and directed. ( Make: GE / L&T / C&S / Schneider )
S&F in repair MCCB 3 Pole, 415 V, adjustable type, 125 Amps with minimum breaking capacity 16 KA Complete all as specified and directed. ( Make: GE / L&T / C&S / Schneider )
S&F in repair MCCB 3 Pole, 415 V, adjustable type, 160 Amps with minimum breaking capacity 25 KA Complete all as specified and directed. ( Make: GE / L&T / C&S / Schneider )
S&F in repair MCCB 3 Pole, 415 V, adjustable type, 200 Amps with minimum breaking capacity 36 KA Complete all as specified and directed. ( Make: GE / L&T / C&S / Schneider )
S&F in repair MCCB 3 Pole, 415 V, adjustable type, 250 Amps with minimum breaking capacity 36 KA Complete all as specified and directed. ( Make: GE / L&T / C&S / Schneider )
S&F in repair MCCB 3 Pole, 415 V, adjustable type, 400 Amps with minimum breaking capacity 36 KA Complete all as specified and directed. ( Make: GE / L&T / C&S / Schneider )
M&L for GI pipe light grade 50 mm dia laid along road crossings / plinth protection with suitable fittings for cable protection or fixed to the pole/ Wall complete all as specified and directed by Engineer-in-Charge . Make : Surya Roshni Ltd / Tata / Jindal steel / Prakash
M&L for GI pipe light grade 80 mm dia laid along road crossings / plinth protection with suitable fittings for cable protection or fixed to the pole/ Wall complete all as specified and directed by Engineer-in-Charge . Make : Surya Roshni Ltd / Tata / Jindal steel / Prakash
Cutting the tarmac / hard standings and excavating in trenches across the road for laying cable including making good the excavated portion by means of PCC 1:3:6, type C1 matching with the surroundings complete all as directed.
Boring of holes underneath road / foot path / hardstanding / culvert etc by using trenchless technology by ultra sound technic using necessary machinery including providing 100 mm dia GI pipe medium grade for drawing cables complete all as specified and directed. Make of GI Pipe : Surya Roshni Ltd / Tata / Jindal steel / Prakash Note: Rate quoted shall include GI pipe also.
Supply and replace PVC insulated single core flexible 1.5sqmm copper cable for instrument wiring complete all as specified and directed by Engineer in charge. Make : Plaza/Finolex/Polycab/Havells
Supply and replace PVC insulated single core flexible 2.5sqmm copper cable for instrument wiring complete all as specified and directed by Engineer in charge. Make : Plaza/Finolex/Polycab/Havells
Supply and replace PVC insulated three core flexible 2.5sqmm copper cable for instrument wiring complete all as specified and directed by Engineer in charge. Make : Plaza/Finolex/Polycab/Havells
Supply and fix in replacement Electronic Timer suitable for street light timer panel/DG AMF panel/ Star Delta Starter panel complete all as specified and directed by Engineer-in-Charge .. Make: L&T / Indoasian /GE /BCH.
Taking down defective street light fitting of any size, type and capacity from height of pole / walls / high mast of any location exceeding 7.0 m height for repair work and re-fixing back after repair work is carried out including checking, inspecting, testing and commmissioning complete all as directed by Engr-in-Charge. Note: (a) The M/L for Items like ballast, lamp, igniters, capacitors, electronic drivers,surge protection devices etc shall be measured and paid separately under relevant items. (b) Necessary tools like ladders & other T&P required shall be arranged by the Contractor. (c) The rate quoted deemed to be inclusive for minor parts nut bolts, circle clips, clamps etc if any required at site. (d) The M/L for repairs to LED panel is not included in the scope and shall be measured and paid separately.
Supply only the following spares suitable for street light/flood light/post top lantern light fittings of Make: Havells / Bajaj / Philips / CG / GE
Electronic driver suitable for 200 to 250 W LED light fitting
Electronic driver suitable for 100 to 150 W LED light fitting
Electronic driver suitable for 70 to 90 W LED light fitting
Electronic driver suitable for 40 to 50 W LED light fitting
Surge protection device of capacity 10 KV suitable for LED light fitting
Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 9000 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed. ( Make: Havells / Philips/ Bajaj/ Wipro/ GE/ CG ). Note: The GI pipe bracket if required will be measured and paid separately under relevant items
Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 7500 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed. ( Make: Havells / Philips/ Bajaj/ Wipro/ GE/ CG ). Note: The GI pipe bracket if required will be measured and paid separately under relevant items
Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 10000 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed. ( Make: Havells / Philips/ Bajaj/ Wipro/ GE/ CG ). Note: The GI pipe bracket if required will be measured and paid separately under relevant items
Taking down old unserviceable street light fittings from any height and Supply & fixing LED street light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 8500 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65/66 and SPD of capacity 10 KV including necessary clamps etc complete and testing on completion all as specified and as directed. ( Make: Havells / Philips/ Bajaj/ Wipro/ GE/ CG ). Note: The GI pipe bracket if required will be measured and paid separately under relevant items
Dismantling old unserviceable flood light fittings from any position exceeding 11.0 m height, Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame LED type (with total lumen output not less than 13700 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65 and surge protection device of 10 KV capacity etc including necessary angle iron supports duly painted in two coats over a coat of primer , clamps, nuts and bolts etc complete and testing on completion all as specified and as directed (Make: Havells/Philips/Bajaj/Wipro/GE/CG).
Dismantling old unserviceable flood light fittings from any position exceeding 7.5 m height, Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame LED type (with total lumen output not less than 10000 lumens and suitable wattage for efficiency not less than 95 lumens/Watt) with ingress protection IP 65 and surge protection device of 10 KV capacity etc including necessary angle iron supports , clamps etc complete and testing on completion all as specified and as directed (Make: Havells/Philips/Bajaj/Wipro/GE/CG).
S&F in repair PVC insulated 3 core 1.5 Sq mm stranded copper conductor cable for connecting junction box to street light fitting testing and commissioning all as directed. ( Make: Plaza/ Gloster/Polycab/Havells ).
Supply and fix PVC (thermo plastic) street light junction box heavy duty with locking arrangement 3 phase aluminium bus bar incl 02 Nos PVC conduit upto the height of top most level of coping of pole from GL alongwith necessary MS clamp nut bolts and washers for fixing and 01 No MCB single pole 240 V 6-32 Amps complete including taking down old one complete all as specified and directed. (Make:- Sintex /Hensel)
M&L for bracket of street light fitting made out of 40 mm bore GI pipe light grade bent to shape required, not less than 1.20 m long, fixed with and including MS flat iron clamps made out of 40 x 6 mm FI, bolts, nuts, washers etc complete including dismantling old one complete all as specified and directed. ( Make : Surya Roshni Ltd / Tata / Jindal steel / Prakash )
M&L for preparation of old painted steel surfaces of 9 m long steel poles including removing oily/greasy spots and applying one coat of aluminium paint complete including applying a coat of white wash on pole coping and lettering the pole details with 125 mm dia adhesive sticker with white letters on blackground etc complete all as directed
M&L for fixing in repair adhesive sticker radium type red coloured water resistant of approx 2 inches width around the circumference of pole at a approx height of two meters all as directed.
Repairs to High Mast/mid mast pole motor of Capacity 1.0 HP/0.75 KW 415 Volts 50 Hz 3 Phase 930 RPM and necessary rewinding with super enamelled copper wire all as per existing and servicing/greasing of reduction gear box complete all as specified and as directed by Engr-in-Charge.
Repair/ Maint of the control panel of High mast/Mid mast and replacement of all unserviceable parts such as contactors/timers etc complete including painting with a coat of synthetic enamel paint
Repairs to High Mast/mid mast of 12.5 m to 16 m height lantern carriage/winch, checking for movement, inspecting the alignment, replacement of broken/defective SS wire roper of size 6 mm 7/19 construction complete, replacement of 5 core 2.5 Sqmm flexible copper conductor, ERP insulated PCP/PVC sheathed trailing cable complete, testing & commissioning complete all as directed by Engr-in-Charge
S&F in repair PVC insulated 6 core 2.5 Sq mm copper conductor cable for connecting highmast light fitting testing and commissioning all as directed. ( Make: Plaza/ Gloster/Polycab/Havells ).
Taking down old unserviceable post top lantern fittings and Supply & fixing post top luminarie LED type of 40 W with IP 65 protection with die cast aluminium graphite grey powder coated finished body , polycarbonate opal diffuser, low power warm white (WW)/natural white (NW) LEDs with better heat dissipation, high efficient constant current electronic driver having operating voltage range from 140 to 280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 10 KV etc complete suitable for 60 mm OD pipe entry including suitable size loop in loop out boxes & flexible 3 core 1.5 Sqmm copper connecting cable from loop in loop out box to fitting etc complete all as specified & directed. (Make: Bajaj/Philips /CG /Wipro /GE /Havells as approoved by GE). Note: The rate quoted shall include GI pipe as required along with foundation , nuts and bolts etc.
Taking down old unserviceable post top lantern fittings and Supply & fixing post top luminarie LED type of 45 W with IP 65 protection with die cast aluminium graphite grey powder coated finished body , polycarbonate opal diffuser, low power warm white (WW)/natural white (NW) LEDs with better heat dissipation, high efficient constant current electronic driver having operating voltage range from 140 to 280 Volt AC, provided with high voltage, open and short circuit protection, Voltage surge protection 10 KV etc complete suitable for 60 mm OD pipe entry including suitable size loop in loop out boxes & flexible 3 core 1.5 Sqmm copper connecting cable from loop in loop out box to fitting etc complete all as specified & directed. (Make: Bajaj/Philips /CG /Wipro /GE /Havells as approoved by GE). Note: The rate quoted shall include GI pipe as required along with foundation , nuts and bolts etc.
Supply and fix of Hot dip galvanised octogonal pole with BSEN-10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement including supply of suitable boards with bakelite sheet as per IS specification suitable to withstand the wind speed of 180 Kmph, 7.5 m height pole having dimensions acroos the face at bottom 175 mm and at Top 70 mm with 3mm thick, base plate 275x275x16 mm and 4 nos of M24 X 750 long "J" bolts alongwith templete etc complete including dismantling old one complete all as specified and directed. (Rate quoted shall include for suitable size of RCC foundation as directed and as per manufacturer instructions) Make: Jindal Steel/National Tubing Co/ Bombay Tubes & Store/ Calcutta Poles & Tubes / Bajaj/ Crompton Greaves/ Philips
Supply and replace power contactor, 3 pole, current rating AC3=40A, AC1 = 55A, 415 V, 50Hz, with integrated auxiliary contactor including necessary wiring, complete all as specified and as directed by Engineer in charge. Make : L&T /Legrand / Siemens / Schnider / ABB
M&L for PCC 1:4:8 type D2 using 40 mm graded aggregate as in foundation complete all as specified and directed.
M&L for PCC 1:3:6 type C1 with 20 mm graded aggregate for coping of poles and stay including form work complete all as specified and directed.
Supply and replace aluminium lugs suitable for 25 Sqmm to 50 sqmm LT UG Cable including nuts, bolts and washers complete all as specified and as directed. Make : Sona cable sockets / swastic / Dowells
Supply and replace aluminium lugs suitable for 16 sqmm LT UG Cable including nuts, bolts and washers complete all as specified and as directed. Make : Sona cable sockets / swastic / Dowells
M & L for painting to metal surfaces at various locations complete with 2 coats of synthetic enamel paint over a coat or red oxide primer after cleaning the old painted surface with scraping complete all as specified and directed
Supply & fix PVC electrical insulation tape 3/4 inch width and 3 m length, industrial grade ISI marked multicolor all complete as specified and directed.
M& L for FRP coating on metal surfaces of LT distribution panel boards for protection against coastal weather complete all as specified and directed.
S & F 9 Watt bush/spike lights with rotating head with an angle of min 60 degrees and pointed spike arrangment for inserting in soil, 240V,AC supply all complete as specified and described. Make : Bajaj/ Philips / Havells / Wipro / GE / CG
S & F LED bulb 9 Watt , 240V, AC supply all complete as specifeid and directed. Make : Bajaj/ Philips / Havells / Wipro / GE / CG
S & F 18 Watt LED bulb, 240Volts AC supply all complete as specified and directed. Make : Bajaj/ Philips / Havells / Wipro / GE / CG
S & F bulb holder pendant type, for 240 Volt AC supply all complete as specified and directed. Make: Havells/ Cona/ Anchor or equivalent
ALPHA ENGINEERING CONSTRUCTIONS
PRADEEP ENTERPRISES
LEOENTERPRISES
DELTA CONSTRUCTIONS
SRI SRK ENGINEERS
SRI HARSHITA ELECTRICALS
AARAV POWER CONTROLS
THE VENKATESWARA SUPPLIERS
BHARGAVI ENGINEERING CONSTRUCTIONS
R AND A ASSOCIATES ENGINEERS CONTRACTORS
SUPREET CONSTRUCTIONS
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .