Loading
Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹3.9 L
Closing Date
1 Oct 2026, 3:30 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
WAGON
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-J, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- "Manufacturing (OEM)/ Overhauling of CASNUB/LCCF 20-C bogies for freight stock OR bogies(Cast/Fabricated) for locomotives(DSL/Electric) OR ICF/ FIAT bogies for coaches OR "Manufacturer of Railway Wagons "
27 conditions · 15 needing a document upload
ANNEXURE-M DECLARATION REGARDING RELATIONSHIP WITH RAILWAY EMPLOYEES/OFFICERS
Submission of signed and stamped copy of complete Tender Document along with NIT and all Corrigendum issued against said tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Annexure II- A filled up, signed and stamped with all the details and also upload the relevant documents i.e. completion certificates carrying all the details of the similar works contracts completed. Own separate Sheet may also be used to fill the details.
Annexure -I NEFT filled up, signed and stamped with all the details has to be uploaded.
If partnership firm is participating then all the documents mentioned in Annexure D & E of the tender document has to be uploaded.
An option for the contractor to take payment from Railways through a letter of credit (LC) arrangement as per railway bd letter no.No.2018/CE-T/9 New Delhi, Dated 04.06.2018
All General Conditions of Contract of Indian Railways- April 2022 with up to date correction slips as applicable. The tenderer is expected to be familiar with the General Conditions of Contract of Indian Railways and it is their responsibility. However, some special features are given here for guidance of the tenderer.
16.TENDERER'S CREDENTIALS:- Documents testifying tenderer's previous experience and financial status should be produced along with the tender or when desired by competent authority. Tenderer(s) who has/have not carried out any work so far on this Railway and who is/are not borne on the approved list of the Contractors of Northern Railway should submit along with his/their tender credentials to establish. (i) His capacity to carry out the works satisfactorily. (ii) His financial status supported by Bank reference and other documents. (iii) Certificates duly attested and testimonials regarding contracting experience for the type of job for which tender is invited with list of works carried out in the past.
The tenderer shall upload signed scanned copies of mandatory credentials such as experience, turn over Certificates and any other documents as applicable.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the IREPS website from time to time.
It is brought to the notice of all bidders that manual/ offline mode of payment through Demand Draft, Banker's cheque, Cash Deposit receipts etc. shall not be available against Works Tenders. The bidders will have to make payment towards tender document cost and earnest money against such tenders through online payment modes like net banking, debit/ credit cards etc. available on IREPS portal.
REFER TO TENDER DOCUMENT FOR COMPLETE INFORMATION ALL THE TERMS AND CONDITIONS OF CONTRACT, SCOPE OF WORK, SCHEDULE OF RATES DETAILS AND SPECIAL CONDITIONS OF CONTRACTS
Work of repair activities for Casnub and BLC Bogies as per scope in WR shop at Northern Railway, C&W Workshop, Jagadhri Workshop for Two year.
6-S-68-Tender-2025-26~NR
6-S-68-Tender-2025-26
Open
Works - General
24 Months
Yamunanagar, Haryana
₹0
₹3.9 L
9 Sept 2026
9 Sept 2026
17 Sept 2026
23 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,93,96,396.32 | ||
| — | 3000.00 | — | — | ||
| Replacement of CP Ring Liner and Friction Liner (CP) of Bogie inclusive GST@ 18%. | — | — | — | 1,66,380 | |
| — | 11160.00 | — | — | ||
| Grinding the excessive material from different location of Bogie after welding inclusive GST@ 18% | — | — | — | 20,41,164 | |
| — | 8760.00 | — | — | ||
| Riveting work on Spring Plank inclusive GST@ 18% | — | — | — | 7,85,596.8 | |
| — | 7800.00 | — | — | ||
| Lifting of Bogie by dismantling of necessary fittings. (i.e. Side Frame Key Bolt & centre Pivot Shackle lock etc) and fitment of adapter in all types of wagons inclusive GST@ 18%. | — | — | — | 9,84,828 | |
| — | 8640.00 | — | — | ||
| Scraping & Cleaning of Casnub & BLC Bogies by wire brushing with manually or mechanize inclusive GST@ 18%. | — | — | — | 22,63,334.4 | |
| — | 12600.00 | — | — | ||
| Replacement and Riveting or Lock Bolting work of Centre Pivot Top for all type wagon inclusive GST@ 18%. | — | — | — | 43,71,192 | |
| — | 7200.00 | — | — | ||
| Stripping & Fitting work of Top Side Bearer Liner & height adjustment of all type wagons (1 Set=4 Side Bearer Liner ) inclusive GST@ 18%. | — | — | — | 17,41,680 | |
| — | 4800.00 | — | — | ||
| Work of Welding and replacement of liner & jaw repair of bogie with grinding inclusive GST@ 18%. | — | — | — | 40,27,104 | |
| — | 1152.00 | — | — | ||
| Replacement /refitting of Bogie Spring Plank inclusive GST@ 18%. | — | — | — | 11,10,597.12 | |
| — | 6000.00 | — | — | ||
| Replacement of C.P Bottom of Bogie inclusive GST@ 18%. | — | — | — | 14,37,240 | |
| — | 13200.00 | — | — | ||
| Replacement of CCPSB Pad Assembly inclusive GST@ 18%. | — | — | — | 4,67,280 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
I_CT_GCC-
ATTACHMENT
Tenderdoc_1.pdf
ATTACHMENT
GCC_April-2022_2022_CE-I_CT_GCC-2022_POLICY_27.04.22.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .