Special repairs to building No. P-36/02 and P-178 at CG Complex and T-21, T-22 and T-23 at Doraha under GE Ludhiana

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item No 02 above but except bricks complete all as specified and directed (Old bricks shall be reused).

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed and removing rubbish off the premises.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed and removing rubbish off the premises.

Taking down cement or cement lime plaster, any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed and removing rubbish off the premises.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on plastered surfaces of walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted over and including 1 mm thick wall care putty including primer complete all as specified and directed.

Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Labour only for erection and fixing only Steel work in tubular /hollow Square pipe trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F Roof truss/Framed works as in purlins, crane grantries, rails and fastening and heavy brackets framing Beam (of tee,angle, pipes of flat section , base plates etc) including distance pieces complete all as specified and directed.

S& F Steel work in tubular /hollow Square pipe trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges complete all as specified and directed and and removing rubbish off the premises.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick an colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in sub floor complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick cement screed base in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing, treating the surface with bees wax polish complete all as specified and directed.

All as per item No 21 above but in one piece as in treads and risers of stair complete all as specified and directed.

Grinding of existing kota stone/marble/terrazo flooring with mechanical powered cutting machine, cleaned thoroughly and finished with bees wax polishing complete all as specified and directed.

M&L for 50mm thick cement concrete type C-2, 1:3:6 (40mm graded crushed stone aggregate) as in plinth protection finished even and smooth (without using extra cement) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thicknness, including cover fillets complete all as specified and directed.

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

M&L providing and fixing Gypsum Board 8mm thick of size (600x600)mm in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed. (frame work for ceiling shall be measured and paid separately).

M&L PCC 1:2:4 type B-1 ( 20 mm graded crushed stone aggregate) as in bed blocks, coping, etc. complete all as specified and directed.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per drg No CEJZ/TD-7/07 sheet 1/3 to 3/3. Note : Glass and painting shall be measured and paid separately under appropriate item etc. complete all as specified and directed.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, single rebated comprises gauzed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 Four Nos for each window including following fitting welded to frame shutter : (a) Mild Steel Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 20mm x 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note : Wire mesh and painting shall be measured and paid separately under appropriate item etc. complete all as specified and directed.

S&F pressed steel frames size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed. Sheet thickness 1.25mm.

S&F 2nd class hard wood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. Type of wood as approved.

S&F 2nd class HW 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. Type of wood as approved.

M&L for preparation of newly wood surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and directed.

S&F 4 mm thick plain acrylic sheet, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed.

S&F Mild steel 300mm, helical door springs including roller and roller plate complete all as specified and directed.

S&F Mild steel sliding door bolts 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F Mild steel barrel tower bolts 200mm long, stove enameled black, with bright bolt and fixed, complete all as specified and directed.

S&F Mild steel pressed handles of size 150mm, oval type, stove enamelled black complete all as specified and directed.

S&F Butt hinges 100mm size, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 140mm complete all as specified and directed.

S&F 20 mm dia curtain rod of mild steel with decorative finish , with fixing brackets complete all as specified and as directed (two brackets per opening of door and window and 08 Nos PVC rings) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for providing reinforced cement concrete cast in situ type B-1, 1:2:4 (20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span including necessary formwork complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately)

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

All as per item No 47 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in chajjas complete all as specified and directed.

M&L formwork to chullah hoods, Chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for cement concrete type D2, 1:4:8 (40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Supplying and filling sand under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block, 80mm thick, any shape and size, confirming to IS-15658-2006, M-40 Grade with grey cement and no pigment complete all as specified and directed.

M&L rendering 5mm thick in cement mortar (1:3) on ceiling/ soffit of slabs finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing of newly plastered surface of walls and applying three coats of white wash complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed and removing rubbish off the premises.

BLANK

M&L rough finished flat form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc. complete all as specified and directed.

M&L rough finished form work to edges of concrete floor and roofs and similar work exceeding 5 cm but not exceeding 10 cm wide complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Vitrified ceramic dark shade coloured tiles 8-10mm thick square/rectungular polished area of each tile not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 61 above but as in skirting over and including rendering 10mm thick in cement mortar 1:4 complete all as specified and directed.

M&L Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

All as per item No 63 above but as in skirting over and including rendering 10mm thick in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured/ printed tiles of size 450mm x 300mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L granite slab (of any type) 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick screed bed of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed.

M & L for machine cut kota stone slab 18-20mm thick as in skirting/steps of stair case laid over & including 10mm thick cement screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed.

S&F mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm each panes complete all as specified and directed.

Taking down shutters of any desciption area exc 1.0 Sqm but n.exc 2.0 Sqm each and refixing in the same opening after easing and minor adjustment complete all as specified and directed.

S&F pressed steel frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and directed. Sheet thickness 1.25mm.

M&L providing cement concrete type C-0, 1:3:6 (12.5 mm graded crushed stone aggregate) as for pressed steel chowkhats complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain glover PVC sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed.

S&F factory made soilid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 125mm aluminium handles, cast type, anodised and pattern/design as approved complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 81 above but 20mm bore complete all as specified and directed.

Refixing old steel tubing and connections in new or old postion (wall, ceiling , floors ,etc) 15mm bore complete all as specified and directed.

All as per item No 83 above item but 20mm bore complete all as specified and directed.

S&F stop valves 20mm bore, cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete fixed in repairs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) triple layer hoisted and fixed in position including nipple suitable for water tank including dismantling water tanks of capacity 500 ltr and removing to store and S&F Brass ball valves 20 mm bore, high pressure, with polythylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) triple layer hoisted and fixed in position including nipple suitable for water tank including dismantling water tanks of capacity 1000 ltr and removing to store and S&F Brass ball valves 20 mm bore, high pressure, with polythylene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making good to floor etc complete all as specified and directed.

S&F in repair plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc. complete all as specified and directed.

S&F in repairs vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basinetc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end complete all as specified and directed (without pedestal).

S&F in repairs vitreous china washbasin, white, flat back, size 550 x 400mm, including brackets & incl 32mm bore waste fitting brass, CP for glazed ware basinetc with long screwed shanks and fly-nuts flange end bedded in red lead cement and other end fixed including pedastal for washbasin complete all as specified and directed.

S&F viterous china squatting pan orrisa pattern, size 580x 440mm white, interged foot rest including connection to trap and to flush pipe, anti syphonic pipe etc complete making good to floor complete all as specified and directed.

M&L 75mm dia cast iron floor trap with grating including jointing to waste pipe with run lead joint and embedded in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate complete all as specified and directed.

S&F cast copper alloy chromium plated fancy type single lever basin mixer complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F Bib taps chromium plated fancy type, cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed in repairs 15mm bore complete all as specified and directed.

S&F CP health faucet suitable for Europian western commode (EWC) including PVC connection 15mm size with PTMT nuts and washer of length 900mm complete all as specified and directed.

S&F Soap dish fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F stop valves/angle valve 15mm bore, chromium plated,fancy type, complete fixed in repairs complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of legth 600mm complete all as specified and directed.

S&F toilet paper holder of CP fixed to walls with chromium plated brass screws complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia D-type, 60cm long between flange complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rack complete all as specified and directed.

S&F Brass CP mixer/Mixing valve on walls for mixing hot & cold water screwed down for iron pipe , including two-in-one joints to steel pipes or unions and plugging and screwing to walls and fixed 15mm bore fixed in repairs complete all as specified and directed.

S&F in repairs PVC bathroom cabinet mirror size 350mm x 450mm complete all as specified and directed.

S&F chromium plated shower roses with or without swivel join ts 125mm size incliuding fixing to steel pipe in repairs complete all as specified and directed.

S&F 10 ltr capacity PVC valveless, syphonic action type flushing cistern,low level, white, with inlet, ball valve, float and handle incl brackets fixed in repairs complete all as specified and directed.

M&L two coat of white wash to old surfaces of walls after preparation complete all as specified and directed.

All as per item No 108 above but on ceiling surfaces complete all as specified and directed.

S & F 25 mm thick flush shutter solid core construction, with block board core and plywood face panels,commercials type on both sides covered with decorative face venner with lipping/frame to math complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory, with plug, waste pipe, washers incl. cantiliver cast iron brackets, connecting union etc overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.

S&F in repairs pre-laminated (both sides) particle board 18/19mm thick with decorative choice laminations, interior grade, fixed with screws to timber frame work complete all as specified and directed.

S&F Aluminium handle cast type anodised of size 75mm complete all as specified and directed.

S&F in repairs curtain rod made out of 25mm dia(outer dia )pipe having thickness 0.63mm , PVC coated and colour/pattern, over all dia 28 to 29 mm including taking down curtain rod along with wooden pallmate laid on wall complete all as specified and directed.

S&F plastic finial of 28 to 29mm bore, decorated type of any colour/pattern, best quality to suit the curtain rod and fixed at the end of curtain rod with suitable adhesive complete all as specified and directed.

S&F mild steel pre-painted bracket to hold the curtain rod and fixed to wall(Concrete/brick masonry) with the help of 2 Nos 50mm long steel screws and rawl plug included drilling with electric drill and making good the disturbed surfaces complete all as specified and directed.

Demolition and breaking up drain pipes/pipe fixed to wall (PVC, Salt glazed ware, AC or re-inforced concrete) set in cement mortar bore of pipe 100mm complete all as specified and directed.

S&F 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floorcomplete all as specified and directed.

S&F 75mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.

S&F PVC (SWR) bend any radius 110mm bore complete all as specified and directed.

S&F PVC (SWR) 'P' trap radius 110mm bore complete all as specified and directed.

M&L Endura chequered tiles 30cmx 30cmx 10mm thick,set, jointed & pointed in neat cement slurry in floors with grey cement and pigments over & including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

BLANK

M&L for cement concrete type E -2, 1:5:10 (using 40 mm graded crushed stone aggregate) as in sunken flooring including demolition for cement concrete exc. 15cm thickness but above ground floor as sunken floor complete all as specified and directed.

M&L for applying two coats of SHALIMAR SUPERCRETE/NITOBOND water proofing coating on the entire surface of sunken portion complete all as specified and directed.

M&L for 15mm thick cement screed in CM 1:3 admixed with integral water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified and directed.

M&L PCC (1;2:4) type B-1 using 20mm graded crushed stone aggregate as in sides of rounded or chamfered on edges of sunken floor complete all as specified and directed.

M&L for stainless steel plate rack of superior quality size 36" x 24" not less than 8 kg complete all as specified and directed.

S&F steel ventilators fixed type with glazing bar complete all as specified and directed.

Dismantling brick tiles or terracing tiles sinlge layer on roofs complete all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part there of) complete all as specified and directed.

M&L for wire brushing neat cement slurry with 3kg of cement per sqm at top and bottom of base coat and cleaning top surface complete all as specified and directed.

M &L for PCC 1:2:4 type B-1, 50mm thick as roof padding concrete to bring the existing slab in slope of 1:40 complete all as specified and directed.

M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) laid on primed surfaces by forced application including applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm including cleaning surfaces complete all as specified and directed.

M&L 40mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar 1:3 mixed with 5% 0f crude oil by weight of cement complete all as specified and directed.

All as per item No 135 but except tiles including cleaning and removing old mortar from bricks complete all as specified and directed.

M&L flush pointing to brick tiles laid flat in roof in CM 1:3 complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, benching rounded or chamfered on edges complete all as specified and directed.

M&L 12mm thick plastering on fair faces of bricks or concrete surfaces finished even and smooth without using extra cement in CM 1:6 complete all as specified and directed.

M&L 5mm thick plastering on fair faces of concrete surfaces finished even and smooth w/o using extra cement in CM 1:3 on ceiling complete all as specified and directed.

M&L preparing of newly surface of plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for Preparing of newly plastered surface and applying two coats of cement base paints on walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil emulsion white or tinted on walls, over 3mm thick Birla wall care putty filling on plastering surface complete all as specified and directed.

M&L for preparation of old surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound emulsion white or tinted on walls, over 3mm thick Birla wall care putty including preparation of surfaces of wall complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed.

BLANK

M&L for preparation of old painted Steel surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified and directed.

M&L for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm (if required) with or without facia and finished with cement morte 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete all as specified and directed. (Note: wlded mesh to be paid separately)

Resecuring or easing and adjustment without taking down the shutters of any description exc 1 Sq.m and n.exc 2 Sq.m each complete all as specified and directed.

Resecuring or easing and adjustment without taking down the shutters of any description exc 2 Sqm each complete all as specified and directed.

M&L framed work as in doors or gate,coolers stand of angle or others section etc confirming to Fe 410-s complete all as specified and directed.

S&F chromium plated sink mixture(single liver) of size (254mmx 203.2mm x 203.2mm) including fixing to steel pipe in repairs complete all as specified and directed.

S&F chromium plated two way bib cock (single knob) of size (254mmx 203.2mmx203.2mm) including fixing to steel pipe in repairs complete all as specified and directed.

S&F butt hinges 100mm long extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed , type B-21 complete all as specified and directed.

M&L vitrified ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item No 156 above but in skirting/dado laid over and including 10mm thick cement screed in CM 1:4 complete all as specified and directed.

S&F Non asbestos fibre cement building boards 7- 8mm fixed or laid/ inserted to GI framework with screws in ceiling flat or sloping complete all as specified and directed.

S&F Anodised aluminium powder coated frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges 100 mm ,3 nos , tower bolt 150 ,2 nos , anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F Aluminium (Die cast body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

S&F Sheet glass, ordinary quality, 5.5 mm thick in squares exc. 0.5 sqm each pane complete all as specified and directed.

S&F three track powder coated aluminium sliding type window with frame without sash bars,aluminium section weighing not less than 0.55kg/RM including necessary jointing cleats,glazing clips,rubber packing anodised aluminium snap beading screws,etc. two shutter to be fitted with 5 to 6 mm thick tinted glass & one shutter to be fitted with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1040mm guide channel at top and bottom with suitable roller including necessary aluminium builders hardware( locking arrangement), complete all as specified and directed.

M&L 100 mm thick PCC ( 1:4:8) type D-2 using 40 mm graded crushed stone aggregates as in Sub base complete all as specified and directed.

M&L 50 mm thick PCC ( 1:2:4) type B-1 using 20 mm graded crushed stone aggregates complete all as specified and directed.

S&F Gun-metal, globe or gate valves of bore dia 20 mm with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of cement based paint on old walls including preparation of surfaces of walls complete all as specified and directed.

M&L One coats white wash on ceiling undecorated surfaces including prepration surface, plastered or un-plastered of old un-decorated surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of distempering of wall over 3mm putty complete all as specified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall PVC Frame as per specification and drawing complete all as specified and directed.

BLANK

S&F in repairs stainless steel kitchen plate rack fixed in wall having overall size 600mm x 750mmx 250mm complete all as specified and directed.

BLANK

S&F in repair vitreous china wash hand basin white flat, back of size 580mm x 450mm including 32mm waste coupling and PVC waste down pipe complete all as specified and directed.

S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc. complete all as specified and directed.

S & F Grating doom 100 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and directed.

M & L for 15mm thick screed bed or bedding layer of CM (1:4) for laying floor finishes complete all as specified and directed.

M&L applying a two coats of solar reflective aluminium paint @ 0.1 Kg/Sqm complete all as specified and directed.

All as per item No 134 above but on parapet complete all as specified and directerd.

Supply only Integral water proofing compound ISI marked as approved complete all as specified and directed.

M&L precast reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in manhole covers and the like set in cement mortar (1:4) duly placed on manholes complete all as specified and directed.

S&F PVC (SWR) 75 dia bend of any radius complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap ,plain with grating including jointing with solvent cement complete all as specified and directed.

Taking down carefully point wiring of any type (ie on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fittings such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm, PVC insulated but unsheathed, stranded copper conductor single core FRLSH cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit fire proof, medium grade, ISI marked 20 mm dia or higher complete with all PVC conduit accessories such as socket, elbow, junction box , bell mouth, reducer, bend and flexible conduit etc including cutting chases in wall for laying of conduit and making good to all disturbed surfaces and matching the same with adjoining specifications, sunk type pressed steel terminal switch box 1.6mm thick with 3 mm thick plastic laminated sheet with modular plate and shutter fixed with steel screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLSH cable green in colour as continous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed for following ;-.

One light/fan point controlled by one, one way switch

One switch socket outlet point 5 Amps on independent board

One 3 Pin socket outlet , 5 Amps on the same board with other switch

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One bell point controlled by one, bell switch 5 Amps

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

All as per item No. 186 described here-in-before but with copper conductor cable FR LS 2.5 Sqmm for one 3 pin socket outlet, 15 Amps and including provision of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board.

Supply and fixing LED lights fitting 1x 20W, 230V, AC decorative box type with driver, holder including LED tube light CRCA housing battens are equipped with specially designed Extruded aluminium heat sink, Milky white PC diffuser and Elegantly designed white colored ABS endcaps to enhance the aesthethetics of the luminaire. with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed.

S & F for recess mounted 2' x 2' square LED panel 36 watts, Ultra morden designed Modular High Efficancy LED luminaire with specialized High transmittance duel/multi layer prismatic optics for glare free symmetric light distribution offering excellent visual comfort with UGR levels of less than 19. luminaires suitable for Armstrong/Grid ceiling and most wide range of applications having multiple driver options like CISPR 15 compliance, Flicker-free operation, <5% THD complete all as specified and as directed.

S & F for New generation energy saving and environmental friendly long life LED street light capacity 25 watts made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom Opening seperate driver compartment with IP 66 protection and impact resistance of IK08 and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.0 mtr long bend to required shape with clamps, nut, bolts complete all as directed.

Supply and fix for SPN MCB DB 8 ways with Volt, Double door type complete all as specified and directed.

Supply and fix for MCB SPN 6- 32 Amps, C-series complete all as specified and directed.

Supply and fix for SP MCB 6-32 Amps C-series complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite 65 x 50mm with three terminals complete all as specified and as directed

Supply and Fix Switch Piano,Flush type single pole , one way 5 Amp complete all as specified and as directed.

Supply and Fix Socket outlet 3 pin, 5 A flush Piano,Flush type complete all as specified and as directed.

Supply and Fix Switch Socket combenation 2 in 1 outlet 5 pin, 6/16 A flush type complete all as specified and as directed.

M&L Sub main wiring with PVC insulated cable copper conductor FRLS two single core 6 Sqmm drawn through Existing or new PVC rigid non metallic conduit including earth continuity FRLSH copper conductor 6 Sqmm PVC insulated with green insulation complete all as specified and directed..

Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep,.Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Old ceiling fan deposited to E/M store complete all as specified and directed.

M &L Earthing including earth work complete with galvanised steel earth plate electrode 60cm X 60 cm X 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level with the top edge of electrode not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron and GI lead protected with protection pipe of GI light grade 15mm dia upto 3mtr above ground level along poles fixed with two clamps of 25mm 3mm flat iron and connected to running earth wire at top of poles and watering pipe 20mm bore of GI medium grade all as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthing test point all as specified and direct and testing on completion including PCC 1:3:6 ) C-I cover and frame excavation and earth work etc complete all as specified in elect plate No 3 of SSR Part -I 2009 Note :- PCC Chamber shall be constructed at least 1.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

Supply and fix in replacement single core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring complete all as specified and directed.

All as per item No 186 above but with stranded copper conductor 4 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly.

S&F for Modular switch one way 6 Amps, 1 module complete all as specified and directed.

S&F for Modular switch one way 16 Amps, 1 module, with neon indicator complete all as specified and directed.

S&F for modular step type fan regulator 120 watt two module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and directed.

S&F for Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified and directed.

S&F for Modular socket, 16Amps, 2/3 pin combination 2 module complete all as specified and directed.

S&F for modular Bell push modular 6 Amps single module complete all as specified and directed.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ AC supply including removal of old unserviceable one complete all as specified and directed.

S & F for for lamp holder, PVC body of brass suitable for batten fitting including removal of old unserviceable one complete all as specified and directed.

S&F for Highly efficient LED 9W inverter bulb B22 CDL, used as a ready replacement for existing LED direct fit lamp complete all as specified and directed.

S&F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnatic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with magnatic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnatic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F for MCB triple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA complete all as specified and directed.

S&F for MCB Single pole and neutral rated capacity 40 amps, 240 Volts breaking capacity 10 KA complete all as specified and directed.

M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 2.5 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavt duty of suitable size including with one run of PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 2.5 sqmm cable, one run of 2.5 sqmm earth cable and one run of PVC heavy duty conduit will be measured as one unit.

M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc five runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable wire complete all as specified and as directed. Note:- Five runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S&F for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and directed.

S&F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb and removal old existing unsv tube light fitting complete all as specified and directed.

S & F in replacement of water heater storage type (Geyser) vertical/ Horizental type as per site requirement with inner contaner of capacity 25 ltrs, electrically operated, AC 230 Volts,BEE 5 star rated, ISI marked including 04 Nos of old fashner nuts required suitable size fixed in brick wall including removal of old unserviceable Geyser handed over to store yard of AGE E/M Ludhiana complete all as specified and directed.

S & F for LED 3 W spot light round, Recess mounted downlighter with pressure die-cast aluminium heat sink & clear PC as a cover in white powder coated finish with independent electronic LED driver LED Spot 3W 3000K complete all as specified and as directed.

S & F wall mounted LED 3/6 watts bed side lamp with necessary electrical connections complete all as specified and as directed.

Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan deposited to E/M store complete all as specified and as directed

Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan deposited to E/M store complete all as specified and as directed

S & F for Decorative wall light fixture made up of Polycarbonate, suitable for 9 W LED lamp B22 base with unbreakable globe suitable for LED bulb and including provosion of inverter LED bulb 9/10 watts complete all as specified and directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 228 here in before but using 2.5 sqmm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sqmm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F in replacement of Switch piano flush type, single pole, one way, and 15/16 Amp complete all as specified and directed.

S & F in replacement of Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, piano flush type complete all as specified and directed.

S & F in replacement of Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified and directed.

S & F MCCB TPN 415 volts 36 KA suitable for fixing on DB of capacity of current rating 100 Amps with adjustable microprocesser release with extended terminals complete all as specified and directed.

S & F for LED downlight surface mounted luminare round type 12/18 watts with inbult driver and polycarbonate opal diffuser white finish operating voltage 230V AC, 50 Hz complete all as specified and directed.

Taking down ceiling/exhaust fan of any size/sweep after disconnecting wire from existing ceiling rose and refixing the same after celeaning dust oiling greasing servicing etc or after necessary repair including providing flexible twin cord from ceiling rose to connector of fan complete all as specified and directed.

JAY ANN CONSTRUCTION COMPANY (BID ID -3362276)

PREM CONSTRUCTION COMPANY (BID ID -3370444)