PROVISION OF SHIFTING OF 03 X HIGH MAST LIGHT, EXTERNAL SERVICES AND CHANGE OVER SWITCH AT INAZ VILLAGE VERAVAL UNDER GE (I) CG PORBANDAR

Amount

Schedule 'A' B/R

Taking down of high mast 16 meter height with all connected accessories from existing foundation & re-installation after shifting at new place & connecting testing, complete all as specified & directed by Engineer-in-Charge. Note:- Cost of T&P like crane, hydra deemed to be included in rates quoted.

Material & Labour for foundation of high mast as per OEM drawing attached, complete all as specified & directed by Engineer-in-Charge.

Supply & fixing foundation accessories RCC M-30 x 850Lg (08 nos) bolts with template and anchor plate as per required as OEM drawing attached, complete all as specified & directed by Engineer-in-Charge.

Material & Labour for taking out old U/s UG cable of size 25 Sqmm 4 core from trench, complete all as specified & directed by Engineer-in-Charge.

Supply & laying XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 25 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc., complete all as specified & directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth for foundation / fixing pole / laying cable and pipe line etc or for manhole etc not exceeding 10 sqm on plan and getting out in hard soil, complete all as specified & directed by Engineer-in-Charge.

Returning filling in including spreading levelling, watering and well ramming in layers not exceeding 25 cm thick using suitable excavated hard soil, complete all as specified & directed by Engineer-in-Charge.

Removing excavated soil to a distance exceeding 50 Metre but not exceeding 100 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point, complete all as specified & directed by Engineer-in-Charge.

Supply and laying 50 /38 mm Double Walled Corrugated (DWC) Pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS-14930 (Part-II) for protection of UG cables, laid in trenches/ road/ drain or fixed along wall, poles or laid under floor, complete all as specified & directed by Engineer-in-Charge. Make : Rex / Poly/ Gemini

Material & Labour for cutting existing road/hard standing not exceeding 45cm x 45cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well ramming watering finish surface 10 cm from top using PCC 1:3:6; including removal of surpluses soil, complete all as specified & directed by Engineer-in-Charge.

Supply and fixing in repair LED Type Aviation obstruction light comprising of aluminum housing with polycarbonate enclosure, 302 Nos. LED are provided fixed in position, complete all as specified & directed by Engineer-in-Charge.

Shifting & Re-fixing of Feeder pillar panel & all connection with necessary foundation, complete all as specified & directed by Engineer-in-Charge.

Material and labour for renewal Earthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Metre deep below normal ground level) with top edge of the plate not less than 1.5 Metre deep below normal ground connected to galvanized earth strip of size 32 x 6mm by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20mm bore, galvanised iron, light grade, and 15mm bore galvanised iron light grade for earth wire protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B-1 for precast chamber cover 50mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion, complete all as specified & directed by Engineer-in-Charge. Note:-Quoted rates shall be deemed to include for earth wire with protection pipe up to 7.5 M length.

Complete servicing of High mast for smooth operation of electric motor for up-down movement of light brackets with gear, pulley, chain rope etc., complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repair induction motor assembly of 3 phase 1.5 HP suitable for 16 meter high mast pole including its connection to existing winch, complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing in repair LED Flood Light fitting 200 watt, High Efficiency IP65 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting including taking down old light fitting of any description, complete all as specified & directed by Engineer-in-Charge.

Supply and fixing in replacement of Multi standard armoured Copper Conductor cable of size 4.00 Sqmm 4 Core, inclusive of all tees, bends, elbows, reducers and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. for interconnection of cable light/looping box to street light fitting etc., complete all as specified & directed by Engineer-in-Charge.

Supply & laying XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, HT underground cable ISI marked with aluminium multi-stranded conductor 11000 volt grade of size 120 Sqmm 3 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing, complete all as specified & directed by Engineer-in-Charge. Make :- Havells/Gloster/Asian or equivalent make mentioned in Appendix 'B'.

Supply and fixing cable jointing kit for 11 KV grade cable for Indoor type termination Heat shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size 120 Sqmm, complete all as specified & directed by Engineer-in-Charge. Note :- The jointing material like long sleeve for RMU connection and other connected items will inclusive in above rate.

Supply and laying PCC HT line route indicator of size 450mm x 230mm x 50mm above the ground and 250mm in depth complete with red colour duly engraved HT/LT cable, complete all as specified & directed by Engineer-in-Charge.

Material & Labour for sand cushioning for protection of PVC cable with approved sand of uniform thickness, laid dry, by filling in trenches and punning to proper required cover, complete all as specified & directed by Engineer-in-Charge.

Supply & laying ISI marked & conforming to IS-5820-1970 unreinforced precast concrete cable cover Class HV, flat of size 300mm x 180mm x 40mm in trenches as protection to HT UG cable, complete all as specified & directed by Engineer-in-Charge. Make :-Mehtab Tiles Indore, Hind Upleta/Sukhi Enterprise

Supply and fixing of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric cable heavy duty 1100 volt grade with stranded aluminium conductor of size 300 Sqmm 3.5 core, complete all as specified & directed by Engineer-in-Charge.

Supply & Fixing of Motorised Changeover Switch 630 Amps, 4 Pole, 415 Volt with cable entry, connecting the cables with proper lugs and glands in SS Enclosure, complete all as specified & directed by Engineer-in-Charge. Make: Indo Asian/Standard/Havells

SURESH ELECTRICALS (BID ID -3238562)

OM ENGINEERING (BID ID -3238958)