PROVN OF TOILET CUM BATHROOM AND PROVN OF PARKING SHED AND MOTOR CYCLE SHED AND FALSE SEILING AND STREET LIGHTS WITH POLE AND PROVN OF SOLAR WATER HEATER AT VARIUOS LOCATIONS OF MIL STN PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removing excavated material n exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

M & L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M & L for RCC M-25 (Design Mix) as in chajjas complete all as specified and as directed.

M & L for form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat all as specified.

M & L for form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat all as specified.

M & L for form work to chullah hoods, chajjas and similar items incl edges rough finished surfaces of concrete flat all as specified.

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide

M & L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete

M & L for form work to sides of pillars, posts, struts, columns for rough finished surface of concrete

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

M & L for mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

Description same as above item No 19 but, 6mm dia and over and incl 10mm dia in stirrups, spacers and binders

M & L for providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete.

M & L for precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10cm in width and setting in mortar 1:6 complete all as specified and directed .

M & L for 15mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed.

M & L for 15mm thick cement plaster on otherthan fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M & L for 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed

M & L for applying a coat of polymer based water proofing compound as per manufaturer's instructions on new plastered surface of wall/ chajja ctc. complete all as specified and directed

M & L for 15mm thick screed bed in CM 1:4 mixed with water proofing compound as per manufacturer instruction, finishing the surface should be even and smooth without using extra cement complete all as specified and directed. (WPC measured separately)

Supply only water proofing compound complete all as specified and directed.

M & L for hard core of broken stone or boulders gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface of broken bricks aggregate, all as specified.

M & L for 100mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M & L for PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as floor / roof surface base surface complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement complete all as specified and directed.

Forming construction joints 30mm deep x10mm wide filled with sealing compound grade "A"

Supply and fixing 30 mm thick Glass Fibree Reinforced Plastic (F.R.P.) panelled door shutter of required colour and approved brand and manufacture ,made with fire -retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings ,cast monolithically with 5mm thick FRP laminate for panels conforming to IS : 14856 , including fixing to frames , complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F Fiiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30 mm thickness .The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs . the frame shall be covered with fibrer glass from all sides M.S. stay shall be provided at the bottom to steady the frame , complete as specified by the manufacturer and as per directions of Engr-in-charge.

S & F Butt hinges 100mm, extruded aluminium alloy with galvanized mild steel hinge pin, anodised of type B-22 and complete all as specified and as directed.

S & F 200mm aluminium anodised barrel tower bolts of extruded section all as specified

S & F 125 mm extruded aluminum alloy handles, fabricated type anodised.

S & F 250mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F M.S. Framed work such as grills grating etc. with ends of bars sholdered and / or riveted into spikes, framed guard bars / railings all as directed.

M & L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed.

M & L for three coats of white wash on walls including preparation of new plastered surface and complete all as specified.

M & L for preparation of new (Previously untreated) plastered surfaces of walls and applying two coats of cement based paint on walls including over a coat of priemr complete all as specified and directed.

M & L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M & L for non-skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but n exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M & L for galzed ceramic coloured tiles 7/8 mm thick area exc 0.11 Sqm but n.exc 0.18 Sqm on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over & including 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed.

M & L for chequered cement concrete coloured tiles rubber moulded decorative designed, size of tiles as approved, with grey cement and pigments, set & jointed in neat cement slurry and pointed with cement & suitable coloured pigment to match the tiles in floors over and including 20mm thick screed bed over and including 100mm thick PCC 1:2:4 complete all as specified and as directed.

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S & F 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S & F 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S & F 20mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F 15mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F 15mm bore dia Bib taps chromium plated with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S & F PVC cabinet mirror size 350mm x 450mm fixed with steel screw with rowl plug complete all as specified and directed.

M & L for Granite (of any type of coloured) work (table rubbed and polished) 20mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.

S & F Oval type Wash Hand Basin superior quality 550 x 400 mm size fitted and including 15 to 18 mm thick granite top over RCC slab incl waste coupling 150mm long complete all as specified and directed.

S & F Brass CP wash basin mixer (long nose)15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed all as specified and as directed.

S & F 32mm bore bottle trap of of PTMT having minium water seal of 25mm (minimum weight 32mm-260gms) complete all as specified and directed.

S & F 50mm PVC (SWR) pipes single socket in any length and including bends and sockets complete all as specified and directed.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F aluminium peg sets of 6 pegs complete complete all as specified and directed.

S&F 450mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S & F 600x450 mm bevelled edge of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed.

S & F Brass chromium plated Tubular towel rail , 20mm dia, D type, 60cm long between falnges complete all as specified and directed.

Supply & Fix vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed.

Supply & Fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, with PVC cover sheet in same colour etc complete all as specified and directed.

S & F PVC valveless, syphonic action type, flushing cistern, 10 lits capacity low level, white, with inlet, ball valve, float and handle including brackets, flush pipe and connection to pipes complete all as specified and directed.

S & F C P Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC, all as specified and directed.

S & F Two way bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and directed.

S & F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.

S & F rotational moulded polethylene water tank of 500 ltrs capacity (Triple layred cylindrical vertical with closed top) noticed and portion all as pacific SSR Part- I.

S & F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed.

S & F PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent cement all as specified.

S & F PVC (SWR) bends 75 mm bore with or with out oval excess door complete all as specified and as directed

S & F PVC (SWR) bends 110 mm bore with or with out oval excess door complete all as specified and as directed

S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors or fixed to wall etc complete

S & F 75 mm dia PVC (SWR) pipes single socketed in any length rubber ring joints, laid in trenches or in floors or fixed to wall etc complete

S & F 150mm bore Reinforced concrete pipes, class NP3, laid in trenches and jointed with collars in cement and sand mortar 1:1 including concrete bed of cement concrete type C-2 (1:4:8) to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested after demolition of concrete beds complete all as specified and directed. (Note :- Excavation & earth work shall be measured separately )

M & L for water proofing treatment to roofs surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 Lit per sqm evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture instruction and finally it will be finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, complete all as specified and as directed.

S & F standard aluminium section powder coated any colour as approved for door frames / shutters, window, ventilator frames/shutters sliding/fixed /louvered and partitions etc including jointing cleat and rubber beading/linning, Pivot ,locking aragement and all building hardware, fixed in position with stainless steel screws all as specified and as directed.

S & F sheet Tinted glass 5.5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Excavation in post holes (or similar holes) in hard/dense soil each not exc. 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc. 25cm in layer and getting out complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed

M & L for PCC 1:3:6 type C-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L for Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre ,including mixing of Polyester triangular fibers as secondary reinfrocement, 125 gram /50 kg Cement , thickness of concrete 25 cm or less, including complete Form work all as specified and directed .

M&L for Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound grade 'A'

Finishing surface to concrete roads, pavements, by brooming

S & F pre-laminated galvalum corrugated / semi corrugated sheeting, 0.50mm thick having tensile strenth 550,as in roof covering fixed with self taping screwes aas specified, steel shall be coated with Alu-Zink alloy (55% Aluminium and 45% Zink) having coating of 150 GSM (AZ-150) ,sheet shall be pre-laminated with primer coat of 5 micron on top and bottom of PU /Polyester top of sheet shall be painted with 20 micron super polyster (EPG paint system ) and bottom shall be 5 micron super polyster paint ,sheet shall be of trapezodial profile having effective width of 1000mm (+/ -) 5 % sheet shall be fixed with 5.50mm dia self driling screws with EPDM washer and shall confirm to AS-3566 class III, all as per manufactuere's instruction and directions complete all as specified and as directed at site.

Ditto all as per Item No. 88 above but for plain sheet as in roof ridges/clading to wall etc. complete all as specified and directed.

S & F steel work as in tubelar truss incl special shaped washer etc complete using erw or induction butt weld ed tubes confirming to IS 1161-1979 gde st-240, including gusset plate pole etc

S & F of rolled mild steel sections as in framing of cladding, glazing, door or gates and the like fixed with angle cleats and connecting plates etc. complete all as specified and directed.

Supply & fix machine made screw bolts with hexogonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexogonal or square nut 16-20 mm dia and exc. 10 cm and nexc. 15 cm long complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S & F of rolled mild steel sections as in main and cross beams, hip and jack rafter, purlins where connected to common rafters, running rails, guides for sliding doors fixed with angle cleat and other connecting plates conforming to Fe-410-W Grade 250 quality A complete all as specified and directed.

All as per item No 94 above but except material complete all as specified and as directed.

M & L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour,design & pattern as in footpath parks, lawns ,drive ways or light traffic parking etc, of required strength, thickness & size /shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of coarse sand, compacting and proper embedding / laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M & L for 25mm thick sand cusioning layer under interlocking paver block complete all as specified and as directed.

M & L for PCC Type B1 1:2:4 (20 mm graded stone aggregate ) as in coping, side kerbs etc complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floors and finishing the surface even and smooth without using extra cement complete all as specified

M & L for PCC 75mm thick 1:4:8 of type D2 using 40mm graded stone aggregate as in sub base and similar complete all as specified and directed.

Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete

All as per item No 103 but along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for.

M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, shelves, chajjas etc and set in CM 1:6 complete all as specified and directed.

M&L for RCC type B1 (1:2:4), 20 mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.

S&F non skid tiles, exterior grade, chequered/grooved pattern of size 300x300mm/ 400x400mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed.

M&L for non-skid coloured Ceramic tiles 7 to 8mm thick (square/ rectangular), area of each tiles exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match.

Ditto all as per item No 110 but on vertical surfaces over 10 mm thick rendring in CM 1:4

M&L for Machine cut kota stone slab flooring 18-20mm thick over 15 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Ditto all as per item No 112 but on vertical surfaces over 10 mm thick rendring in CM 1:4

Dismantling of tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc

Demolition of Precast concrete block walling built in cement mortar complete all as specified and directed .

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc.

Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc.

Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed.

S & F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bore fancy type, CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed.

Do - all as per above item 123 but 20 mm bore

S&F in repair 15mm bore dia pillar tap cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs vitreous china hand wash basin white exclusive quality, size 550 x 400 mm incl PVC waste pipe and waste coupling cutting for and pinning in ends of brackets or erecting stand fixed complete all as specified and directed.

S & F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S & F in repairs Brass chromium plated Tubular towel rail , 20mm dia, D type , 60cm long between falnges complete all as specified and directed.

S & F in repairs 1000 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) incl connections all as specified.

Taking down chowkats or frames exc. 1.5 but n.exc 4m2 each with shutters (W/o taking off shutters from the frame) and removal to store.

All as per item No 130 but n.exc 1.5m2 each -ditto-.

Taking down chowkhats or frames without taking off shutters n exc. 1.5 Sqm and refixing in same opening

Taking down chowkhats or frames without taking off shutters exc. 1.5 Sqm but n.exc 4 sqm each and refixing in same opening

S & F pressed steel frames of size 125x60mm (using PBI sheet 1.25 mm thick) for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as for filling in door frames and including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for fixing of hold fast complete, as specified and as directed.

S & F pressed steel frames of size 105x60mm (using PBI sheet 1.25 mm thick) for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as for filling in door frames and including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) for fixing of hold fast complete as specified and as directed.

S & F 2nd class hard wood 32 mm thick, plain framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged ), or of veneered particle board medium density, wood particle board with commercial face veneers all as specified and directed by Engr-in-Charge .

S&F 32 mm thick IInd class hard wood glazed skelton shutters open rebated and prepaired to recive glass,guage etc (W/o sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat.

S & F 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of M S tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PCV ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementsuppling & fixing in the frame at site as per specification & drawings.

S&F steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed welded complete all as specified and directed.

S&F steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed welded complete all as specified and directed.

S&F 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, complete all as specified

S&F Extruded aluminium alloy handles, fabricated type, anodised size-150mm complete all as specified and directed.

S&F in repairs Extruded aluminium alloy handles, fabricated type, anodised size-150mm complete all as specified and directed.

S & F steel ventilators with top hung shutters incl. hinges, steel handle and steel peg stay complete with glazing sash, dovetailed or welded.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple.

S&F 28mm dia fancy type wooden finish MS dropery rod fixed with wooden finale stop, brackets etc to wall complete as sample approved all as specified and directed by Engr - in - charge.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repairs 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane all as specified.

All as above item No 153 but 3mm thick sheet glass ground or Obscured or frosted on one side and ditto

M & L for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified.

M & L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying a coat of synthetic enamel paint all as specified.

M&L for Preparation of old steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified.

M/L for 14 mm to 16 mm thick baroda green stone slab toping table rubbed and mirror polished over 15 mm thick screed bed or bedding layer ( 1:6) and jointed with white cement slurry mixed pigment to match the colour incl rounded / half rounded edge as in steps, jambs, pillars, window-cills, cooking platforms and like with a hole for gas pipe in cooking platform etc. Including dismentling complete all as specified.

Ditto all as per item No 158 but on vertical surfaces over 10 mm thick rendering in CM 1:4

Taking down eaves gutters and rain water pipes ( any size or pattern) incl all fittings , shoes, bends, swan neck etc. and removal to store

S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F 75 mm bore PVC (SWR) junction single (Single T) equal or unequal

S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

M&L for Second class hard-wood in scantlings, clean sawn framed and fixed including removing old timber complete all as specified and as directed

Repair of Chajjas by completly removing old broken plasters or pieces of concrete and dubbing out with cement mortar 1:4 or by cement concrete 1:2:4 (12.5 mm graded aggregate) incl necessary formworks and finally finishing the surface smooth and even w/o using extra cement and applying two coats of cement based paint complete (plan area of chajjas to be measured)

S&F double legged door stopper of aluminium alloy with rubber all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatment, preparation of surface and applying two coat of oil bound distemper on surfaces of walls over a coat of alkali resistant primer over 1 mm thick wall care putty all as specified complete all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty all as specified complete all as specified.

M & L for complete removal of existing treatment, preparation of surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm 1 mm thick wall care putty complete all as specified.

M&L for complete removal of existing treatment, preparation of surface and applying three coats of white wash as in ceilings all as specified complete all as specified

M&L for complete removal of existing treatment, preparation of surface and applying three coats of white wash as in walls all as specified complete all as specified

M & L for complete removal of existing treatment, preparation of surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified.

S&F in repairs 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side laps fixed with coach screws and washers in roofs etc with grade of zinc coating 275 complete all as specified and as directed.

S&F in repairs 0.63 mm thick plain galvanised mild steel sheeting as in ridges, hips, valley gutter, drip, crumple and straight flashing (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed.

S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

Taking down carefully Copper/Aluminium point wiring (Light fan socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc), removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking down carefully any type LED tube light fitting and removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking down carefully any type security light fitting and removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking down carefully any type DB's with MCB and removing materials from site and making good disturbed surface of walls, floors etc, complete all as specified and directed.

Taking out old unserviceable cable form ground and making good disturbed surface of floors etc, complete all as specified and directed.

M&L for point wiring Concealed/conduit type (as per site reqmt) with 1.5 Sqmm, single core (FRLS), PVC insulated with multistranded unsheathed copper conductor cable including rigid non- metallic PVC surface / concealed conduit 20 mm or higher dia, light grade ISI marked complete with all PVC conduit accessories / fittings and sunk switch boxes with 3 mm thick plastic laminated hard glossy surface sheet (white) top cover, including continuous earth wire of PVC insulated, unsheathed, green in colour 1.5 Sqmm multistrand copper conductor (FRLS) connected to all fittings, sunken boxes and common earth and connected to earth dolly , screwed with Brass screws, cup washers complete all as specified and directed for the following :-

(a) One light point/Fan point controlled by one, one way switch of 5/6 Amps.

(b) One 3/5 pin socket outlet 5/6 Amp on same board with other switch of 5/6 Amp.

(c) One 3/5 pin 5/6 amps socket out-let point on independent board controlled by one, one way switch of 5/6 amps on independent board.

(d)All as per item 182 herein above but with 2.5 Sq mm cable (FRLS) for one 15/16 Amp socket outlet controlled by one switch on independent board and 2.5 Sqmm PVC insulated unsheathed multi stranded copper conductor cable as continuous earth wire complete.

S & F Switch piano, flush type, white finish, 5/6 amps, single pole, one way all as specified and directed.

S & F Switch piano flush type, white finish, 15/16 amps, single pole, one way, complete all as specified and directed.

S & F Socket outlet 3 pin, 5/6 amps and 2 pin 5/6 amps flush type, complete all as specified and directed.

S & F Socket outlet two in one 3 pin 5/6 amps and 3 pin 15/16 amps (multipurpose), flush type, non shutters, non inter locking type, complete all as specified and directed.

S & F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed.

S & F Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection etc complete all as specified & directed.

Supply and Fix step type electronic fan regulator socket type on the existing phenolic laminated sheet AC, SP 230 volts complete as all specified and directed.

S & F LED 9 W bulb complete all as specified and directed.

S & F 1x25 watt LED security light fitting , pressure die-cast aluminium including fixing the same of GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x4mm duly painted and suitable size of nut & bolts etc. and making electric connection with two core copper flexible wire of 0.50 Sqmm complete all as specified and directed.

S & F LED Bulk head 10 Watt with PDC aluminium housing and milky diffuser including LED 10 watt complete all as specified and directed.

S & F 4 Watt decorative ultra slim linear LED lighting fixture with extruded Al. heat sink, environmental friendly, energy efficient, complete all as specified and directed.

Supply and fix of LED Integrated Batten T5 box type surface mouted, (1x09 Watt) in 2 feet prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

Supply and fixing of LED Integrated Batten T5 box type surface mouted, (1x18 Watt) in 4 feet prewired including electric electrical connection with PVC insulated twin twisted copper wire of size 0.75 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.

S & F MCB DB sheet metal enclosure for DB, SPN, 8 way having protection with 200 amps rated bus bar, 240 volts, double door type, suitable for housing MCB's and isolators,concealed in wall complete all as specified and directed.

S & F MCB DB sheet metal enclosure for DB, TPN, 4 way having protection with 200 amps rated bus bar, 440 volts, double door, including grauting suitable for housing MCB's and isolators, with separate netural & earth link complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCB with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply and fixing of MCB single pole, 240 volts, 6-32 Amps of 10 KA complete all as specified and directed.

Supply and Fix MCB single pole & Neutral 240 volts, 40 amps, of 10 KA complete all as specified and directed.

S &F of MCB Triple pole & Neutral 240 volts, 63 amps, of 10 KA

S&F for in replacement of Sub main wiring with two single run of 6 Sqmm (Normal cross sectional area) of single core unsheathed PVC insulated cable, 1100 volts grade multi stranded copper conductor drawn through with & including conduit of 25 mm dia or higher dia with and including necessary conduit accessories, surface/concealed type including 6 Sqmm stranded copper conductor PVC insulated cable as earth wire connected to common earth dolly, including taking down complete all as specified and directed.

Supply and fix Water heater storage type, electric,capacity 35 litres.BEE 5 star rated with grouting with four nuts and bolts complete with all assessories and chromium plated flexible two number pipe connection for hot / cold water supply all as specified and directed.

Supply and fixing of exhust fan AC single phase 230/240V OF size 450 mm sweep with louvrs complete all as specified and directed.

Material and Labour for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 duly reinforced with 8mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade etc complete all as specified and directed.

Supply and fixing exhust fan AC single phase 230/240 V of size 300 mm sweep with louvrs complete all as specified and directed.

Supply and laying XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.

M & L for sand cushioning with dry and clean sand over and under the under ground cable in trenches, ducts for cable protection incliding levellling and consodilation complete all as specified and directed by EIC.

M&L for laying well burnt bricks,as in protection of cable laid dry, flat aboutting each other wide wise all as directed by Engineer-in-Charge.

M&L for GI tubing 40 mm dia light grade for cable protection all as specified and directed.

Supply and fix loop-in loop-out box of size 20x20x15cm made of 1.6mm thick PVC sheet weather proof, dust and vermin proof with hinged door of locking arrangements and slanting cover on top with provision of aluminium busbar of size 25 x 2mm - 4 No fixed on insulator complete fixed on pole with and including suitable size MS flat iron clamps, nuts, bolts and washers, etc. complete all as specified and directed.

Supply & Fix cable twin core PVC insulated and unsheathed flat solid copper conductor of size 1.50 Sqmm including PVC conduit not less than 20 mm dia proper sadling on wall /pole complete all as specified and directed.

Supply and fixing powder coated pressure die cast aluminium compact LED street light fitting heat resistance toughened glass with lens suitable for 45 Watt including bracket of length 1.5 meter of size 40mm dia with clamp nut bolt etc complete all as specified and directed.

Supply and fixing powder coated pressure die cast aluminium compact LED flood light fitting heat resistance toughened glass with lens suitable for 80 Watt including fixing arrangement on pole complete with bracket and clamp nut bolt etc complete all as specified and directed.

Supply laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cables (heavy duty) with stranded aluminium copper conductor , 1100 volts grade of size 4 core 10 Sqmm complete all as specified and directed.

Supply, fixing, commisioning and testing of Nature timer switch control Street Lights complete with MCB, Power and Panel duly complete with wiring, single phase, max load 8KW complete all as specified and directed. Note :- CA No & date of installations shall be painted/marked on all timer switch provided by the contractor

Supply and erection, in truly vertical position, LT Steel tublar swaged pole complete with cast iron base plate finial taper plug, bolt , nut and screwed type 410 SP 31 09 mtrs long Class -10 including painting of poles with two coats of synthatic enamel paint in red and white strips upto 1.5 mtr height from coping over a coat of red oxide primer including numbering of poles complete all as specified and directed. (Note : PCC, Earth work and MS work as cross arms clamps etc shall be measured and paid separately)

Supply and Installation of Solar water heating system ,Flat plate collector type ,with heat exchanger of 1000 litre per day capacity, with electrical heating back up complete all as specified and directed by Engr-in-Charge

Supply and fix extra PVC tank 1000 Ltr cap for cold water make up tank for solar water heater.

Supply and Installation of Solar water heating system ,Flat plate collector type ,with heat exchanger of 200 litre per day capacity ,with electrical heating back up complete all as specified and directed by Engr-in-Charge

Supply and fix extra PVC tank 250 Ltr cap for cold water make up tank for solar water heater.

M & L for Brass Float valve heavy duty 25 mm

S&F sheet metal enclouser MCB DB SPN 2 way 240 volts with one No. MCB SPN 20 Amps, 'C' curve type having rupturing capacity 10KA and making electrical connections complete all as specified and directed.

Material & Labour for sub main wiring with 1100 volts grade PVC insulated and unsheathed cable with stranded copper conductor 2x6 Sqmm, of code Red for Phase,Black For Neutral & Green For Earth concealed in wall and drawn including PVC conduit along with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.

S & F 25mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S & F 15mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S & F 25mm bore Gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

M & L For cutting of existing pipe and making threading and sutaible work work for connection for pipe all as specified and directed by Engr-in-charge

M & L MS work ie angle iron or flat iron of any size for making stand for water make up tank including cutting bending drilling holes in hot or cold including painting two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed.

M&L for GI pipe medium grade size15 mm dia with all fittings, fixed complete to walls and ceiling or laid in floor insulated with best quality of insulating material/glass wool duly binded with chicken wire mesh and covered with aluminium cladding duly clamp complete all as specified and directed

All as per item no 234 but size 20 mm dia

M/s Rana Enterprises