REPAIR MAINT OF DI CI WATER SUPPLY PIPE LINE IN RAMGARH CANTT UNDER GE RAMGARH CANTT

Amount

Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers of not exceeding 25 cm thick after the cables & pipes etc. are laid, jointed & tested and foundations complete all as specified and directed by Engineer-in-Charge.

Removal of surplus excavated soil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

M & L for laying plain cement concrete (1:2:4),type B-2( using 40 mm graded crushed stone aggregate) for supporting of CI/DI/GI pipes 0.60 RM below ground level and upto 5 RM above the ground level smooth finishing without using extra cement, complete all as specified and as directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 100 mm bore of pipe complete all as specified and as directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 150 mm bore of pipe complete all as specified and as directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 200 mm bore of pipe complete all as specified and as directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 250 mm bore of pipe complete all as specified and as directed.

Taking up cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead for 300 mm bore of pipe complete all as specified and as directed.

Supply, laying, jointing and testing of 100mm dia class K-9 Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, with cement mortar lining in inner side as per IS:8329/2000 (latest version) and other relevant standards and metallic zinc coating followed by a finishing layer of black bitumen coating on external surface, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed. Notes: Excavation & earthwork and rubber gasket joint ( push on joints) shall be measured and paid separately under respective item of BOQ.

Supply, laying, jointing and testing of 150mm dia class K-9 Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, with cement mortar lining in inner side as per IS:8329/2000 (latest version) and other relevant standards and metallic zinc coating followed by a finishing layer of black bitumen coating on external surface, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed. Notes: Excavation & earthwork and rubber gasket joint ( push on joints) shall be measured and paid separately under respective item of BOQ.

Supply, laying, jointing and testing of 200mm dia class K-9 Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, with cement mortar lining in inner side as per IS:8329/2000 (latest version) and other relevant standards and metallic zinc coating followed by a finishing layer of black bitumen coating on external surface, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed. Notes: Excavation & earthwork and rubber gasket joint ( push on joints) shall be measured and paid separately under respective item of BOQ.

Supply, laying, jointing and testing of 250mm dia class K-9 Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, with cement mortar lining in inner side as per IS:8329/2000 (latest version) and other relevant standards and metallic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed. Notes: Excavation & earthwork and rubber gasket joint ( push on joints) shall be measured and paid separately under respective item of BOQ.

Supply, laying, jointing and testing of 300mm dia class K-9 Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, with cement mortar lining in inner side as per IS:8329/2000 (latest version) and other relevant standards and metallic zinc coating followed by a finishing layer ofblack bitumen coating on external surface, suitable for push on joint (rubber gasket joint) in any length with inside cement mortar lining laid in trenches complete all as specified and as directed. Notes: Excavation & earthwork and rubber gasket joint ( push on joints) shall be measured and paid separately under respective item of BOQ.

M & L for Run lead joint for CI pipe/DI pipe including spun yarn etc., for spigot and socket pipes and fittings for 300 mm bore, including clauking the spun yarn, complete all as specified and as directed.

M & L for Run lead joint for CI pipe/DI pipe including spun yarn etc., for spigot and socket pipes and fittings for 250 mm bore, including clauking the spun yarn, complete all as specified and as directed.

M & L for Run lead joint for CI pipe/DI pipe including spun yarn etc., for spigot and socket pipes and fittings for 200 mm bore, including clauking the spun yarn, complete all as specified and as directed.

M & L for Run lead joint for CI pipe/DI pipe including spun yarn etc., for spigot and socket pipes and fittings for 150 mm bore, including clauking the spun yarn, complete all as specified and as directed.

M & L for Run lead joint for CI pipe/DI pipe including spun yarn etc., for spigot and socket pipes and fittings for 100 mm bore, including clauking the spun yarn, complete all as specified and as directed.

M & L for Cast Iron fittings for spigot and socketed cast iron pipes for water mains upto 150 mm bore, such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, complete all as specified and as directed.

M & L for Cast Iron fittings for spigot and socketed cast iron pipes for water mains 200 mm to 300 mm bore, such as bends (any type, radius and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs, complete all as specified and as directed.

M & L for rubber gasket joints(push on joints) for spigot and ductile iron specials pipe for 100 mm bore, complete all as specified and as directed.

M & L for rubber gasket joints(push on joints) for spigot and ductile iron specials pipe for 150 mm bore, complete all as specified and as directed.

M & L for rubber gasket joints(push on joints) for spigot and ductile iron specials pipe for 200 mm bore, complete all as specified and as directed.

M & L for rubber gasket joints(push on joints) for spigot and ductile iron specials pipe for 250 mm bore, complete all as specified and as directed.

M & L for rubber gasket joints(push on joints) for spigot and ductile iron specials pipe for 300 mm bore, complete all as specified and as directed.

M & L for Ductile Iron specials suitable for Ductile Iron pipe class K-9 upto 150 mm dia complete all as specified and as directed.

S & F cast iron sluice valve 300mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing /taking down of old unserviceable one, complete all as specified and as directed.

S & F cast iron sluice valve 150mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing of old unserviceable one, complete all as specified and as directed.

S & F cast iron sluice valve 100mm dia, with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged with 2 Nos rubber insertion gasket joints, nuts, bolts and washers of required size and Nos, complete including removing of old unserviceable one, complete all as specified and as directed.

M&L for Brick work using old size sub class "B" bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc for supporting of CI/DI/GI pipes including 12 mm thick rendering in cement mortar 1:6 complete all as specified & directed.

ABHISHEK ENTERPRISES

AASHIRWAD ENTERPRISES

simplex infra project

arics infrastructure

united builders