Providing Safe Drinking Water Facilities to the Police Training center at Chinna Karagraharam Gram panchayat of Macilipatnam Mandal in Krishna District. Est Cost Rs:13.00 Lakhs

Cost and supply HDPE pipe PE 100 PN 6 DN 75 , 75 mm dia HDPE pipe from approved firm to work spot and all labour charges etc complete including Overheads and contractor profit @13.615 %

Laying and Jointing HDPE Pipe lines for water supply with HDPE PE-100 grade pipes as per IS specifications, with its amendments and revisions thereon including supplying of pipes,necessary specials such as bends, Tees, etc. lowering, laying and jointing of pipe lines true to alignment and gradient, trench excavation for pipelines using Manual labour in all soils except rock requring blasting and refilling trenches with excavated earth (other than rocky soils and boulders) with watering, tamping and removing surplus earth from site of work and filling the pipeline with water and testing etc., complete . The rates are inclusive of cost and conveyance of all materials and labour charges for finished item of pipeline work, but excluding GST and ncluding Over Heads and Contractors profit @ 13.615% for (PE 100, PN-6) DN 75 HDPE Pipe Line (trench size 0.70X1.00M)

Drilling of Horizontal bore wells of Size 225 mm dia and inserting of 75 mm dia HDPE pipes in to the it at a depth of 2.70 mts below BT surface by digging of trench including refilling of trench with excavated soil bailing out of water and including all labour charges etc complete Overheads and contractor profit @13.615 %

Supply and delivery of Resilient seated soft seating Gate valves (sluice Valves) with body and Bonnet of Ductile Iron of Ductilte Iton GGG-40/SG-400/IS or GGG-50SG-500/7 or equlvalent as per IS 1865, IS 3896-2and wedge fully Rubber lined with food grade quality grade W270 Grade EPDM, Replaceable spindle nut with out gland packing with gland packing with 3.0 rings protection systems on the shaft and seals of NBR. The Valves should be vacuum tight and 100% leak proof with face to face dimensions as per BS 5163 Type A/IS 14846. All valves should be with fusion bonded Electrostatic powder coating bpth inside and out side (Min 250 Microns) RAL 5005 with poclet less straight through body passage conforming to Design standards of DIN 3202 F4/BS-5163 Type A Flange Drilling as per IS 1538, Construction of RCC valve Chambers as per requirements with RCC slab and RCC manhole cover with locking arrangements etc complete for finished items of works. The rates are inclusive of cost and conveyance of all materials and labour chrges for finished items of work, but excluding GST and Seigniorage chages as specified in technical specification including over head and contractors profit @13.615% fot construction of valave pits RCC items only

Cost and supply 80 mm dia Sluice valves etc complete including Overheads and contractor profit @13.615 %

Cost and supply 40 mm dia Air valves etc complete including Overheads and contractor profit @13.615 %

Cost and supply 80 mm dia CI 0.60 mts long tail piece etc complete including Overheads and contractor profit @13.615 %

Cost and supply 80 X 80 X 40 mm dia AIR Valves etc complete including Overheads and contractor profit @13.615 %

Cost and supply 16 X 90 mm Bolts and nuts etc complete including Overheads and contractor profit @13.615 %

Cost and supply Rubber packing sheet etc complete including Overheads and contractor profit @13.615 %

Labour charges for fixing of Public tap connetions and cement jointing including all labour charges etc copleted fitter

Labour charges for fixing of Public tap connetions and cement jointing including all labour charges etc copleted Man Mazdoor

Earth work excavation and depositing on bank with an initial lead and lift in sandy soils as per SS 20B for foundation.

CC (1:4:8) mix using 40mm size H.G.Chips including cost and convenyance of all materials from approred quarry to work spot including all labour chargesans seigniorge charges Etc for RCC items.

CC (1:2:4) mix using 20 mm size H.G Chips from apporved source including cost and conveyance of all materials and labour charges Etc, complete.(per 1 cum), RCC items

Cost and supply 110 mm dia PVC Saddle etc complete including Overheads and contractor profit @13.615 %

Cost and supply 20 mm dia GI pipes etc complete including Overheads and contractor profit @13.615 %

Cost and supply 20 mm dia 0.23 mts long GI Nipples etc complete including Overheads and contractor profit @13.615 %

Cost and supply 20 mm dia GM ferroles etc complete including Overheads and contractor profit @13.615 %

Cost and supply 20 mm dia GI Couplings etc complete including Overheads and contractor profit @13.615 %

Cost and supply 20 mm dia GI Union etc complete including Overheads and contractor profit @13.615 %

Cost and supply 20 mm dia GM Ball valve etc complete including Overheads and contractor profit @13.615 %

Cost and supply 20 mm dia GI Elbows etc complete including Overheads and contractor profit @13.615 %

Cost and supply 20 mm dia GI Bends etc complete including Overheads and contractor profit @13.615 %

Cost and supply Shellock bottles etc complete including Overheads and contractor profit @13.615 %

Cost and supply Thead balls etc complete including Overheads and contractor profit @13.615 %

Cost and supply 0.90 mts dia precast RCC well rings etc complete including Overheads and contractor profit @13.615 %

Cost and supply 100 mm dia 1.00 mts long RCC hump pipe @ NP2 Class etc complete including Overheads and contractor profit @13.615 %

Labour charges for fixing of Public tap connetions and cement jointing including all labour charges etc completed for fitter

Labour charges for fixing of Public tap connetions and cement jointing including all labour charges etc completed for man mazdoor