MPLADS - RS

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, red earth and ordinary gravel SS 20B including shoring ,strutting,sheeting ,planking and dewatering cost of hire charges of T&P labour charges etc. complete for fineshed iem of work for foundation of building SBC -100kn/m2 (APSS NO.308)

Filling with stone dust (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and Cost and Conveyance of water to site and all operational, incidental, labour charges, Seigoirage charges, sales and other taxes etc, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) For Column Foundation

Plain Cement Concrete (1:4:8) proportion Nominal mix for foundations using 40mm size SS-5 metal including cost and conveyance of all materials and curing charges, labour charges, machine mixing and laying concrete in foundations ramming etc complete for Bed Concrete (APSS No 402) For Column Foundation

VRCC M- 30 grade design mix 20mm and 12mm HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. for Column Footings

VRCC M- 30 grade design mix 20mm and 12mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. for Column Pedestals

VRCC M- 30 grade design mix 20mm and 12 mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. for Plinth beam

VRCC M- 30 grade design mix 20mm and 12 mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges. For COLUMNS

Filling Footing trenches with selected earth including watering and ramming including all operational, incidental, labour charges, hire charges of T&P etc complete including cost and conveyance of material and labour charges etc complete for finished item of the work (APSS No 309& 310) For refilling in Footing trenches

Brick Masonry for Basement in CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. (APSS No. 501 & 504). -For basement above plinth beam

Filling the basement with selected earth including watering and ramming including all operational, incidental, labour charges, hire charges of T&P etc complete including cost and conveyance of material and labour charges etc complete for finished item of the work (APSS No 309& 310) For Basement filling

Plain Cement Concrete (1:5:10) proportion Nominal mix for foundations using 40mm size SS-5 metal including cost and conveyance of all materials and curing charges, labour charges, machine mixing and laying concrete in foundations ramming etc complete for Bed Concrete (APSS No 402)

Brick Masonry in superstructure with CM (1:8) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. (APSS No. 501 & 504). -For superstructure

Supply and fixing of sal wood Door Single frame of size 1.20 x 2.00 mt with frame made of well seasoned sal wood scantlings of size 100 x75 mm frames, 4 nos of 9" ' z" holdfasts, and painted with liquid bitumen on wall sides including cost and conveyance of all materials and labour charges for making , fixing door frame in position and all including charges with necessary screws complete. and accessories like aldrop,towerbolt,door stopper,butt hinges,handle etc., complete

Supply and fixing of sal wood Panelled Window Single frame of size 0.90 x 1.20 mt with frame made of well seasoned sal wood scantlings of size 100 x75 mm frames, 4 nos of 9" ' z" holdfasts, and painted with liquid bitumen on wall sides including cost and conveyance of all materials and labour charges for making , fixing door frame in position and all including charges with necessary screws complete. and accessories like towerbolt,door stopper,butt hinges,handle etc., complete

VRCC M- 30 grade design mix 20mm and 12 mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for Lintels

VRCC M- 30 grade design mix 20mm and 12 mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges for 60cm wide sun-shades of 75mm thick at fixed end and 50mm thick at free end with an average thickness of 62.5mm, and Lofts. (As per BLD-CSTN)

VRCC M- 30 grade design mix 20mm and 12 mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges For Roof Beams

VRCC M- 30 grade design mix 20mm and 12 mm size HBG (SS-5) metal from approved quarry using minium 370 kg of cemnet of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication & seigniorage charges For 125 mm thick Roof Slab

Providing impervious coat over exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Ornamental plastering to Ceiling 12mm thick in CM (1:3) with dubara sponge finish ,mixing mortar, finishing, scaffolding, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, curing, etc., complete for finished item of work.

Plastering with CM (1:6), 20 mm thick two coats with base coat of 16mm thick and top coat in CM(1:4) 4mm thick with dubara sponge finishing including Cost and Conveyance of all materials and labour charges etc., complete for External walls

Plastering with CM (1:5), 12 mm thick in two coats with base coat of 8mm thick and top coat in CM(1:3) 4mm thick with dubara sponge finishing including Cost and Conveyance of all materials and labour charges etc., complete for Internal walls

Providing Flooring with vitrified tiles of 1st quality of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs etc., complete for finished item of work but excluding seignorage charges.

Providing skirting to internal walls to 10 cm height/risers of steps with Soluble Salt PORCELAIN VITRIFIED TILES length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like Cuddapah stone, cement, sand and water for finished item of work.

Supply & application of one coat water based cement primer of interior grade I and two coats of acrylic emulsion paint having VOC content less than 50grams/ litre for internal walls including cost and conveyance of all material to site sales & other taxes, incidental operational and all labour charges etc, complete.

Supply & application of one coat water based cement primer of exterior grade 2 and two coats of acrylic emulsion paint having VOC content less than 50grams/ litre for internal walls including cost and conveyance of all material to site sales & other taxes, incidental operational and all labour charges etc, complete.

Supplying & fixing of Iron Doors and Windows Grills including labour charges for fabricating steel including cost of welding rods, power charges & fixing the grill in position etc complete

Supplying, fitting and placing HYSD bar reinforcement Fe-450, in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded

Supply and fixing of 25mm outer dia 2.2 mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required PVC deep boxes and all accessories including and labour charges etc., complete. Makes : GoldMedal / Sudhakar

Supply and Fixing of 25mm outer dia Medium grade ( 1.55 mm Thick ) P.V.C. pipe (ISI MARK) concealed in wall with all required PVC junction boxes and all accessories including masonary work. Makes : GoldMedal / Sudhakar

Supply and erecting MS Galvanished fan hook box with hook in RCC slab including all Labour charges etc., complete.

Supply and run of 2 of 36/0.3 sq.mm (phase and neutral) FR P.V.C. insulated flexible copper cable in existing pipe for mains, including labour charges etc., complete.Makes of wires:- Goldmedal/sudhakar etc of Cateagery-II

Supply and run of 1 of 14/0.3 mm ( 1.0 Sq mm) FR PVC insulated flexible copper cable (above of Cateagery-II) in existing pipe for earth continuity including all labour charges etc compleate. For 2.5Sq.mm earth continuety.

Wiring with 2 runs (Phase, neutral) of 14/0.3mm ( 1.0 Sq.mm) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose of Cateagery-II including all labour charges etc., complete and 3mm thick hylam sheet covering for Light, Fan, Exhaust Fan etc., complete.

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continutinuety including wire leads earth connection along with all labour charges etc Compleate

Supply and fixing of 16A 3 pin socket and 16A switch power outlets with front hylam sheet cover plates with following configurations. 1) 16A socket - 1 No. 3) 6A switches - 2 No.s 2) 16A switch - 1 No. 4) 6A sockets - 2 No.s

Supply and fixing of SPN 12 Way distribution board IP 43 Protection as per IS:13032 suitable for single pole MCBs in sheet steel enclosure with 63Amps DP Isolator as incomer and 10 NoS of 6 to 32 Amps single pole, 10KA breaking capacity 'c' curve MCBs as outgoings including connections and labour charges etc complete concealing in wall.Makes: Milltec ( of Cateagery-II)

Supply and 2 runs of 6.0 sq mm (phase and neutral) and P.V.C. insulated flexiible copper cable of Cateagery-II in existing pipe for run of mains including labour charges etc., complete.

Supply and fixing of 20-24 w not less than 1100 mm length LED batten light with extruded alluminium housing and poly carbonate cover. Input voltage AC 220-26 volts with P.F>0.9 surge protection 2 KV THD<15% with in built driver and frosted cover CCT 3000 K - 5700 K minimum CRI >70, etc., complete.

Supply and fixing of batten holder /slantering holder in lien of ceiling rose of light point complete with alll connnections and all labour charger eith 11W C.F.L bulb .

Supply and transportation of 48" (1200mm) Sweep 5 Star rated Ceiling Fan, with double ball bearings without Regulator.

Supply and fixing of Modular type Electronic fan regulator hum free step type socket size in the existing switch board.Makes: Goldmedal (Curve)

Labour charges for fixing of ceiling fan with regulator including transportation, 3 core wire leads etc complete

Supply and transportation of .........LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's System efficacy >100lm/W and junction temprature < 70°C, with Ingrees protection IP65, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection ≥ 10KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70 etc., complete, Makes : As per list of recommended brands as category II.

Fixing of LED Street Light luminaire on wall with .90mt 40mm dia GI pipe bracket and anti-tilting MS flat, 1.5 Sq.mm flexible copper cable etc.,including all labour charges for mason work and giving connections etc., complete.